CODE STANDARD SPECIFICATION
Enforceable by Law or by Globally accepted “how to Must meet requirements by
contract instruction” Contracts
Written by government Written by public
or government approved organization or by government Written by private companies
body body
Guidelines for design, Set of technical definitions
Additional requirements,
fabrication, construction and and guidelines for
beyond code & standard
installation manufacturing
ASME, BS, IS, DIN ASTM, SAE, ISO Shell DEP, EIL Spec
Pressure Piping Codes
The American Society of Mechanical Engineers (ASME) established the ASME B31 Pressure Piping
Code to ensure the safety of the pressure piping system design and construction through published
engineering rules.
Followings are the some major pressure piping codes-
ASME B31.1 Power Piping
ASME B31.1 Code is mainly used for the design and construction of power piping of Electric Power
Generating Stations, Industrial & Institutional Plants, Geothermal Heating Systems, and Central &
District Heating and Cooling Systems.
ASME B31.3 Process Piping
ASME B31.3 Code is mainly applicable to the design and construction of pressure piping found in
Petroleum Refineries, Chemical plant, Pharmaceutical, Food, Textile, Paper, Paint, Cryogenic, and
any Process Plants and Terminals.
ASME B31.4 Hydrocarbon Transportation Pipeline
ASME B31.4 Code is applicable for the pipelines that are used to transport liquids between plants,
terminals, and pumping regulating stations. These liquids include crude oil, condensate, natural
gasoline, liquefied petroleum gas, carbon dioxide, liquid alcohol, and liquid petroleum products. For
example the pipeline from upstream to midstream or downstream.
ASME B31.5 Refrigeration Piping and Heat Transfer
Components
ASME B31.5 Code is applicable for the design and construction of pressure piping containing
refrigerants or coolants. It is mainly used for HVAC piping system.
ASME B31.8 Gas Transportation and Distribution Piping
Systems
ASME B31.8 Code is applicable for gas transportation pipelines between the sources and terminals.
It also applies to gas pipelines, gas compressor stations, gas metering & regulation stations.
ASME B31.8 deals with the design, construction, inspection, operation, and maintenance of gas
transportation pipeline, but it does not deal with auxiliary piping, such as water, air, steam, or
lubricating oil.
ASME B31.9 Building Services Piping
ASME B31.9 Code is used for the design and construction of piping found in Industrial, Institutional,
Commercial, Public Buildings, and multi-unit residences which do not require the different range of
pipe sizes.
ASME B31.11 Slurry Transportation Piping Systems
ASME B31.11 Code is mainly applicable to transport slurry of non-hazardous materials, such as coal,
mineral ores, and other solids, between the slurry process plants and process piping system. One of
the important uses of these pipelines is in the mining industries to move ores from the mines to
elsewhere.
Note:
There are many similarities in each Code, such as minimum pipe wall thickness calculation, inspection,
and testing. But the exact rules are different for each code depending upon their application. The
allowable stresses are different for each code, reflecting a different factor of safety per the different
applications and operating conditions.
ASME Standards for Piping Components or
Fittings
The below standards are used for design, dimensions, manufacturing processes, and end
preparation for many commonly used piping components under ASME B31.3 process piping
systems.
ASME B16.1 – Cast Iron Flanges and Flange End Fittings
ASME B16.3 – Malleable Iron Threaded Fittings of class 150 & 300
ASME B16.4 – Cast Iron Threaded Fittings of Class 125 & 250
ASME B16.5 – Flanges and Flanged Fittings
ASME B16.9 – Factory-Made Wrought Steel Buttwelding Fittings
ASME B16.10 – Face to Face and End to End Distance of Valves Except for Socket & Threaded
End
ASME B16.11 – Forged Fittings, Socket Weld and Threaded, Socket weld End Preparation
ASMEB 16.12 – Cast Iron Threaded Drainage Fittings
ASME B16.15 – Cast Bronze Threaded Components of Class 125 & 250
ASME B16.18 – Copper Alloy Solder Joint Pressure Fittings
ASME B16.20 – Metallic Gasket
ASME B16.21 – Nonmetallic Gasket
ASME B16.25 – Buttweld or Bevel End Preparation
ASME B16.26 – Copper Alloy Components for Flared Copper Tubes
ASME B16.28 – Wrought Steel Buttweld Short Radius Elbows and Bend
ASME B16.34 – Valves Design – Flanged, Threaded, and Welding End
ASME B16.36 – Orifice Flanges
ASME B16.37 – Hydrostatic Testing of Control Valves
ASME B16.39 – Malleable Iron Threaded Pipe Unions, Classes 1150, 250 and 300
ASME B16.42 – Ductile Iron Flanges and Flange End Fittings of Class 150 & 300
ASME B16.44 – Manually Operated Metallic Gasket Valves for Building piping system
ASME B16.45 – Cast Iron Components for Solvent Drainage Systems
ASME B16.47 – Large Diameter Steel Flanges (NPS 26″ through NPS 60″)
ASME B16.48 – Steel Line Blanks
ASME B1.20.1 – Threading End Preparation
ASME B18.20.1 – Dimensions of Stud Bolts and Machine Bolts
ASME B18.20.2 – Dimensions of Nuts
API – American Petroleum Institute
API 5L – Line Pipe
API 6D – Pipeline Valves
API 6FA – Fire Test for Valves
API 12D – Field Welded Tanks for Storage of Finish Products (liquid)
API 12F – Shop Welded Tanks for Storage of Finish Products (liquid)
API 12J – Oil and Gas Separators
API 520 – Pressure Safety Valve
API 594 – Wafer and Wafer-Lug Check Valves
API 598 – Valve Inspection and Testing
API 599 – Plug Valves – Flanged and Butt-Weld Ends
API 600 – Gate Valves-Flanged and Butt-Weld Ends
API 602 – Small Bore Steel Gate Valves-Flanged, Threaded, or Buttweld End
API 608 – Ball Valves-Flanged and Butt-Weld Ends
API 609 – Lug-and Wafer-Type Butterfly Valves
API 610 – Centrifugal Pumps
API 617 – Centrifugal Compressors
API 618 – Reciprocating Compressors
API 619 – Rotary-Type Positive Displacement Compressors
API 620 – Design and Construction of Low-Pressure Storage Tanks
API 650 – Breather Valve
API 660 – Heat Exchangers used for General Refinery Service
API 661 – Air-Cooled Fin-fan Heat Exchangers used for General Refinery Service
ASTM – American Society of Testing
Materials
ASTM provides a collection of documents called material specifications for pipes and piping
components.
Specifications starting with “A” denotes Ferrous steel
Specifications starting with “B” denotes non-ferrous alloys
Specifications starting with “D” denotes plastic material
ASTM codes specify the basic chemical composition of the material and the manufacturing process
through which the material is shaped into the finished product. Some of the common material
standards are:
ASTM A 53 Gr. B – CS (Carbon Steel)Seamless and Welded Pipe
ASTM A106 Gr. B – CS Seamless Pipe
ASTM A 672 Gr. B60 – CS Welded Pipe (EFW)
ASTM A333 Gr. 6 – LTCS (Low-Temperature Carbon Steel) Seamless and Welded
Pipe
ASTM A671 Gr. CC60 – LTCS Welded Pipe
ASTM A335P11, P22, P5, P9, P91 & P92 – LAS (Low Alloy Steel) Seamless Pipe
ASTM A691 – LAS Welded Pipe
ASTM A 312TP304, TP316, TP321 & TP347 – SS (Stainless Steel) Seamless &
Welded Pipe
ASTM A358 Gr. 304, 316, 321 & 347 – SS Welded Pipe
ASTM A105 – CS Forged Fittings
ASTM A350 Gr. LF2 – LTCS Forged Fittings
ASTM A182 Gr. F11, F22, F5, F9, F91 &F92 – LAS Forged Fittings
ASTM A182 Gr. F304, F316, F321 & F347 – SS Forged Fittings
ASTM A234WPB – CS Wrought Fittings
ASTM A420 Gr. WPL6 – LTCS Wrought Fittings
ASTM A234 Gr. WP11, WP22, WP5, WP9, WP9 & WP92 – LAS Wrought Fittings
ASTM A403 Gr. WP304, WP316, WP321 & WP347 – SS Wrought Fittings
ASTM A216 Gr.WCB – CS Casted Fittings
ASTM A352 Gr.LCB – LTCS Casted Fittings
ASTM A217 Gr. WC6, WC9, C5, C12, & C12A – LAS Casted Fittings
ASTM A351 Gr.CF8, CF8M & CF8C – SS Casted Fittings
ASTM A515 Gr. 60 – CS Plate/Sheet
ASTM A516 Gr. C60 – LTCS Plate/Sheet
ASTM A387 Gr. 11, 22, 5, 9, 91 &92 – LAS Plate/Sheet
ASTM A240 Gr. 304, 316, 321 & 347 – SS Plate/Sheet
ASTM A193 Gr. B7 – Bolt used with CS Fittings
ASTM A320 Gr. L7 – Bold used with LTCS Fittings
ASTM A193 Gr. B16 – Bolt used with LAS Fittings
ASTM A515 Gr. B8 – Bolt used with SS Fittings
ASTM A194 Gr. 2H – Nut used with CS Fittings
ASTM A194 Gr. 4 – Nut used with LTCS Fittings
ASTM A194 Gr. 4 – Nut used with LAS Fittings
ASTM A194 Gr. 8 – Nut used with SS Fittings
AWS – American Welding Society
AWS provides information on the welding procedure, different weld application, weld design, welder
training, testing, and inspection of the weld joints. Click here to see the different welding positions 1G,
2G, 5G & 6G.
AWS D10.12 – For Pipe welding (mild steel)
AWS D10.18 – For Pipe welding (stainless steel)
AWS B1.10 – Procedure for the nondestructive testing of welds
AWS B2.1 – Guide for Welding Procedure and welder Qualification
AWWA – American Water Works
Association
AWWA standards are applicable to the piping elements required for low-pressure water services.
Few commonly used standards are as follows-
AWWA C-207 – Flanges for General Services (4″ to 144″ NPS
AWWA C-500 – Gate Valves for Water and Sewage system
AWWA C-502 – Dry-Barrel Fire Hydrants
AWWA C-503 – Wet-Barrel Fire Hydrant
AWWA C-504 – Rubber Seated Butterfly Valves
AWWA C-507 – Ball Valves for Size Range 6″ to 48″ NPS
AWWA C-508 – Swing Check Valves 2″ to 24″ NPS
AWWA C-509 – Resilient Seated Gate Valves for water and sewage
AWWA C-510 – Cast Iron Sluice Gate Valves
AWWA C-900 – PVC Pressure Pipe, 4″ to 12″ NPS for Water services
MSS-SP: Manufacturers Standardization
Society – Special Practices
The most common MSS-SP standards are mentioned below-
MSS-SP 6 – Flange Face Finish
MSS-SP 25 – Marking Procedure for Valves, Piping Components, and Flanges MSS-SP 42
– Corrosion-resistant of Class 150 Gate, Globe and Check Valves
MSS-SP 43 – Stud End
MSS-SP 56 – Procedure for Design, Manufacturing, and Material Selection, of Hanger-Supports
MSS-SP 61 – Procedure for Pressure Testing of Valves
MSS-SP 67 – For Butterfly Valves
MSS-SP 70 – For Cast Iron Gate valves
MSS-SP 71 – For Cast Iron Check Valves
MSS-SP 72 – For Ball Valves
MSS-SP 78 – Cast Iron Plug Valves
MSS-SP 80 – For Bronze Gate, Globe and Check Valves
MSS-SP 83 – Unions Fittings
MSS-SP 85 – For Cast Iron Globe Valves
MSS-SP 88 – For Diaphragm valves
MSS-SP 95 – Swaged Nipple
MSS-SP 97 – Olets Fittings, Click here to see the different type of Olets fittings and their application
Boiler and Pressure Vessel Code
ASME Section I Power Boilers
ASME Section II Materials Specifications
ASME Section IV Heating Boilers
ASME Section V Non-Destructive Examination
ASME Section VIII Pressure Vessels – Division 1 and Division 2
ASME Section IX Welding and Brazing Qualifications
ASME Section X Fibreglass-Reinforced Plastic Pressure Vessels
TEMA – Tubular Exchanger Manufacturing
Association
TEMA is applicable for Heat Exchangers-
TEMA R – Heat Exchangers Used in Hydrocarbon Industry
TEMA C – Heat Exchangers Used in General Services
TEMA B – Heat Exchangers Used in Chemical Services
NACE – National Association of Corrosion
Engineers
NACE standards apply to corrosion prevention and control and are used where corrosion is a key
concern. NACE assists during the design, building, and operation of the piping system and minimizes
the negative impacts of corrosion.
EJMA – Expansion Joint Manufacturing
Association
The EJMA standards are used for the proper selection, manufacturing, and application of metallic
bellows expansion joints.
IBR – Indian Boiler Regulations
IBR is the Indian Standard for design, operation, inspection, and maintenance of the Boiler.
These were the most commonly used piping codes and standards. There are more
piping codes and standards other than listed above. I have listed the important
ones.
Oonchi Oonchi Waadi Lyrics
Oonche Oonche Waadi Mein
Baste Hain Bhole Shankar
Oonche Oonche Waadi Mein
Baste Hain Bhole Shankar
Kaisi Yeh Laagi
Mujhko Teri Lagan
Gaaun Aur Jhoomun
Hoke Tujhme Magan
Oonchi Oonchi Waadi Mein
Baste Hain Bhole Shankar
Oonchi Oonchi Waadi Mein
Baste Hain Bhole Shankar
Bhole Bhole Shankar Bhole Bhole
Bhole Bhole Shankar Bhole
Rudraroopa Mahadeva
Trikal Darshi Shankara
Rudraroopa Mahadeva
Trikal Darshi Shankara Shankara
Har Har Sambhu
Kahan Nahi Tu Mere Sambhu
Tu Brahma Tu Vishnu
Har Ghar Har Mann Sambhu
Ik Chhote Rudraksh Mein
Bade Pahaad Mein Sambhu
Baarik Dhaage Mein Dikhta
Gehri Nadi Mein Sambhu
Alakh Niranjan Mere Digamber
Baandh Le Apne Bandhan Mein
Shiv Tera Dhayan Agar Bhool Jaaun
Toh Main Mar Jaaun
Pyar Se Tere
Sabka Jeewan Chale
Khushiyan Tu Deve
Sabke Kasht Hare
Unchi Unchi Vaadi Mein
Baste Hain Bhole Shankar
Bhole Bhole Shankar Bhole
Unchi Unchi Vaadi Mein
Baste Hain Bhole Shankar
Sambhu
Parvat Pe Baitha
Mera Bhola Shankar
Main Uska Deewana
Bholenath Ka Hoon Main Deewana
Bholenath Ka Hoon Main Deewana
Jhoothi Yeh Duniya Saari
Jhootha Yeh Zamaana
Bholenath Ka Hoon Main Deewana
Bholenath Ka Hoon Main Deewana
Kaisi Yeh Laagi
Mujhko Teri Lagan
Gaaun Aur Jhoomun
Hoke Tujhme Magan Sambhu
Oonchi Oonchi Vaadi Mein
Baste Hain Bhole Shankar
Oonchi Oonchi Vaadi Mein
Baste Hain Bhole Shankar
Bhole Bhole Shankar Bhole Bhole
Bhole Bhole Shankar Bhole
Rudraroopa Mahadeva
Trikal Darshi Shankara
Rudraroopa Mahadeva
Trikal Darshi Shankara Shankara
Written by: Hansraj Raghuwanshi, DJ Strings, Kabeer Shukla
Read Full Lyrics at iLyricsHub: https://www.ilyricshub.com/oonchi-oonchi-waadi-omg-2/
