CHEMLUBE
CHEMLUBE 215, 229, 230, 501, 751, and 822 ®
DIESTER-BASED COMPRESSOR LUBRICANTS
Applications:
The Chemlube diester-based series are fully synthetic compressor oils specially formulated with premium synthetic
ester base fluids for use in a wide variety of air compressors.
Chemlube 215, 229, and 230 are designed from diester base oils for rotary screw compressors and will offer a
typical service life of 8,000 hours under good operating conditions. Chemlube 501 and 751 are designed from
diester base oils for reciprocating compressors and are recommended for high pressure air compressors.
®
CHEMLUBE
Chemlube 822 is a heavier weight formulated with premium triester base oils for use where an ISO 220 is required.
Chemlube 501 and 751 are recommended for reciprocating compressors and vacuum pumps using the following
gases:
Air Ethylene Methane Propane
Butadiene Natural Gas Synthesis Gas Carbon Monoxide
Carbon Dioxide (dry) Helium Hydrogen Sulfide (dry) Nitrogen
Furnace (crack) Gas Hydrogen Sulphur Hexafluoride
Nominal Operating Range is -15°C to 230°C (5°F to 445°F)
Typical Industrial Applications:
Rotary Screw Compressors High Pressure Air Compressors
Rotary Vane Compressors Vacuum Pumps
Centrifugal Compressors Gear Boxes
Reciprocating Compressors Chains
Performance Benefits:
Outstanding thermal and oxidative stability
Will not varnish or form carbon deposits
Wide operating temperature range
Built in detergency action
Extended drain intervals reduces oil disposal, thus increasing cost effectiveness
Caution: May affect some paint finishes, plastics and seals
USDA H-2 authorized
Chemlube 215 carries the NSN #9150-01-068-0676 (quarts). Chemlube 501 carries the NSN #9150-01-052-7562
(gallons); NSN #9150-01-025-8649 (pails); NSN #9150-01-240-4950 (drums).
03/10
HEALTH & SAFETY 900 Centerpoint Blvd.
To obtain an MSDS on this or any other Ultrachem product, please contact your representative. MADE New Castle, DE 19720
TECHNICAL SUPPORT IN P.............302-325-9880
To learn more about Ultrachem products and applications please contact us at
[email protected] USA F.............302-325-0335
[email protected] WWW.ULTRACHEMINC.COM
The information in this bulletin is, to the best of our knowledge, true and accurate, but all recommendations or suggestions are made without guarantee, since the conditions of use are beyond our control. Form Tech-SP1298
CHEMLUBE
®
CHEMLUBE 215, 229, 230, 501, 751, and 822
DIESTER-BASED COMPRESSOR LUBRICANTS
TEST Chemlube Chemlube Chemlube Chemlube Chemlube Chemlube
®
TYPICAL PROPERTIES
CHEMLUBE
METHOD 215 229 230 501 751 822
ISO Grade ASTM D2422 32 46 68 100 150 220
SAE Grade SAE J-300 10 10W20 20 30 40 50
Viscosity @ 40°C,cSt ASTM D445 36.3 45.4 70 99 146.5 222
Viscosity @ 100°C,cSt ASTM D445 5.9 6.5 7 10.2 13.3 18.6
Viscosity Index ASTM D2270 106 89 60 83 90 92
>260/>50
Flash Point, °C/°F ASTM D92 252/486 252/485 252/485 260/500 271/520
0
Pour Point, °C/°F ASTM D97 -48/-54 -40/-40 -38/-35 -29/-30 -34/-30 -34/-30
Copper Corrosion ASTM D130 1a 1b 1a 1b 1a ---
Foaming Sequences I, II, III ASTM D892 Nil Nil Nil Nil Nil ---
Demulsibility ASTM D1401 Excellent Excellent Excellent Excellent Excellent Excellent
Evaporation, % ASTM D972 1.0 1.0 1.0 0.98 0.90 <1%
Carbon Residue, % ASTM D189 <0.02 <0.02 <0.02 <0.02 <0.020 <0.020
Dielectric Strength ASTM D877 --- --- 34.33 --- --- ---
Four Ball Wear, 40 Kg.,
1200rpm, 75°C, 1 hr., Scar ASTM D4172 --- --- --- 0.38 --- ---
Diameter, mm
Specific Gravity ASTM D1298 0.96 0.96 0.96 0.95 0.94 0.92
03/10
HEALTH & SAFETY 900 Centerpoint Blvd.
To obtain an MSDS on this or any other Ultrachem product, please contact your representative. MADE New Castle, DE 19720
TECHNICAL SUPPORT IN P.............302-325-9880
To learn more about Ultrachem products and applications please contact us at
[email protected] USA F.............302-325-0335
[email protected] WWW.ULTRACHEMINC.COM
The information in this bulletin is, to the best of our knowledge, true and accurate, but all recommendations or suggestions are made without guarantee, since the conditions of use are beyond our control. Form Tech-SP1298
