SABIC® C20+ SABIC® C20+
DESCRIPTION
This product is a blend of eicosene-1, docosene-1, tetracosene-1, hexacosene-1, octacosene-1 and triacontene-1 made by Alpha-Sablin process.
TYPICAL PROPERTY VALUES Revision 20210521
SPECIFICATIONS TYPICAL VALUES UNITS TEST METHODS
SPECIFICATIONS
Carbon Number
<C20 ≤5.0 Wt. % GC
C20-C24 ≥65 Wt. % GC
C26-C28 ≤25 Wt. % GC
>C30 ≤15 Wt. % GC
Appearance
- White to grey Waxy solid Visual -
Color
@60°C ≥5.0 Saybolt ASTM D6045
PROPERTIES TYPICAL VALUES UNITS TEST METHODS
PROPERTIES
Density
@ 71°C 765.8 kg/m³ -
Boiling Point
- 320 – 395 °C -
Melting / Freezing Point
- 30 – 35 °C -
Flash Point
- 180 – 200 °C -
Viscosity
Kinematic @ 100°C 3.15 mm²/s -
test tds
APPLICATIONS
Production of heavy alkyl benzene mainly used for lubricant additive and metalworking fluids.
Production of chlorinated olefins be used as a secondary plasticizer in PVC formulations and flame-retardants.
Wax replacement for candles and polishing.
TOXICITY AND SAFETY
Refer to SDS
STORAGE AND HANDLING
© 2023 Copyright by SABIC. All rights reserved
Refer to SDS
DISCLAIMER
Any sale by SABIC, its subsidiaries and affiliates (each a “seller”), is made exclusively under seller’s standard conditions of sale (available upon request) unless agreed
otherwise in writing and signed on behalf of the seller. While the information contained herein is given in good faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED,
INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE
test tds
APPLICATIONS
Production of heavy alkyl benzene mainly used for lubricant additive and metalworking fluids.
Production of chlorinated olefins be used as a secondary plasticizer in PVC formulations and flame-retardants.
Wax replacement for candles and polishing.
TOXICITY AND SAFETY
Refer to SDS
STORAGE AND HANDLING
Refer to SDS
DISCLAIMER
Any sale by SABIC, its subsidiaries and affiliates (each a “seller”), is made exclusively under seller’s standard conditions of sale (available upon request) unless agreed
otherwise in writing and signed on behalf of the seller. While the information contained herein is given in good faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED,
INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE
PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each customer must determine the suitability of seller
materials for the customer’s particular use through appropriate testing and analysis. No statement by seller concerning a possible use of any product, service or design is
intended, or should be construed, to grant any license under any patent or other intellectual property right.
© 2023 Copyright by SABIC. All rights reserved
