Scribd
Upload
25 views2 pages

Specialized Coatings For Colorized Preferential Lanes Ride A Way

Uploaded by

jrr202204
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
25 views2 pages

Specialized Coatings For Colorized Preferential Lanes Ride A Way

Uploaded by

jrr202204
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

SPECIALIZED

COATINGS FOR COLORIZED


PREFERENTIAL LANES
TM

A T R A F F I C S A F E T Y S O L U T I O N S C O M PA N Y

Bike Lanes Bus Lanes Roundabouts Streetscapes


APPLICATION OVERVIEW
Refer to the complete set of Ride-A-Way™ Application Instructions
for detailed instructions for proper application of coatings. These
are available at www.ennisflint.com.
COATINGS FOR Substrate and ambient air temperature must be

COLORIZED LANES 50°F and rising.

Surface Prep: The surface should be completely dry,


clean and free of debris, water, and contaminants.
TM
TM
Enhance visibility and safety
Masking: Use duct tape with plastic or paper to
awareness for all shared road- protect areas from overspray as needed.

way users... pedestrians, cyclists, Mixing:


Combine Parts A, B and colorant in accordance with
motorists, and transit users. the application instructions. Mix thoroughly and
BENEFITS: strain before applying the coating with the Rapid
Sprayer II.
t Increases awareness of shared road-
way use among motorists, pedestri-
ans, cyclists, and transit users
t Enhances visibility of preferential
lanes
t Provides clear delineation and traf-
fic calming
t Promotes balanced multimodal Spraying: Apply coating using a circular movement
transportation network according to the application instructions.

PERFORMANCE-BASED FEATURES:
Durability: The epoxy-modified acrylic Chemical Resistance: Impervious to
formulation is specifically designed for gas, oil, engine and de-icing agents
long-term use even in harsh climates that often come into contact with
and wet conditions. road surfaces.
Brooming: Evenly distribute with brooming motions
according to application instructions to ensure com-
Flexibility: The formulation allows the Environmentally Friendly: Water- plete coverage into the surface.
coating to expand and contract at the based, acrylic formulation contains
same rate as the pavement to avoid no harsh solvents and can be recy-
cracking. cled along with asphalt. Meets EPA
requirements for VOCs.
Friction: Slip and skid resistant aggre-
gates provide greater traction for safe
pedestrian and vehicle traffic. Due to For optimal performance, Ride-A-Way coatings are ap-
plied in layers--a spray pass that is allowed to dry be-
the low viscosity of the coating, it has fore the next pass is applied. Once dry to the touch, the
very good static and dynamic friction next pass can be sprayed using the same procedure.
properties at high and low speeds.
Approximate coverage rates:
3 layers (no vehicle traffic) = 225 sq ft. per
Color Stability: Advanced acrylic 5 gallon container
MBZFST XJUIWFIJDMFUSBóD TRGUQFS
polymer technology and superior pig- 5 gallon container
ments provide long-lasting color re-
Standard Colors:
tention, especially against UV rays. EF Bike
Colors shown are approximate.

Lane Green Purple Blue Red Terracotta

Ennis-Flint 5PEE$PVSU5IPNBTWJMMF /$ttXXXFOOJTøJOUDPN


©2012 Ennis-Flint MKT-00023

You might also like