800 / 802 / 805 INSTALLATION MANUAL

2 │ Table of Contents

Features ................................................................ 03

Specifications .................................................... 04

Quick - Start ........................................................ 05

Remote Control ................................................. 07

Hardware Installation .................................... 10

800 / 802 / 805 Models

Additional Info..................................................... 14

Owner’s Record .................................................. 15

 Features │ 3

Model Comparison Chart

800YV 800TSV 802YH 802TSH 805YV 805TSV

VGA ( D-SUB 15 Pin ) Input 1 1 1 1 1 1

VIDEO ( RCA ) Inputs 2 2 2 2 2 2

AUDIO ( RCA ) Inputs 2 2 1 1 2 2

PC AUDIO ( DC 3.5mm ) Input 1 1 1 1 1 1

Built - In Speaker ● ● ● ● ● ●

High Quality Scaling ● ● ● ● ● ●

High Quality Anti - Aliasing ● ● ● ● ● ●

Auto Power On ● ● ● ● ● ●

Touch Screen ○ ● ○ ● ○ ●

AR Touch Screen ○ ○ ○ ● ○ ○

HDMI Input ( with sound ) ○ ○ ● ● ○ ○

●Standard ○Not Available

Features

● For In-Car Computing, PC, Server, GPS, POS, and various VGA Use
● High Bright LCD Panel with LED Backlight
● 5-wire Resistive Touch Screen ( USB )
( Optional : 5-Wire Resistive AR+AF GFG Touch Screen )
● Multi - Monitor Touchscreen Support
● VGA Input ( D-SUB 15-Pin ) x 1
● Video Input x 2
● Audio Input x 3
● HDMI Input With Sound x 1 ( TSH/YH Only )
● Built-in Speaker
● NTSC / PAL Multi-System
● 4:3 Aspect Ratio
● High Resolution Display
● Supports HDMI Version 1.1 ~ 1.3 ( TSH/YH Only )
● Adjustable backlight level for night-time use
● Realtek High Performance Image and Video Signal Processor
● AISS - Advanced Image-Scaling and Shaping
● Factory Mode to disable front button(s)
● Factory Mode to disable on screen text
● Last Input memory
● Last Power setting memory
● IR Remote Control
● Auto power-on upon signal detection
● Automatic display adjustment
● On Screen Display Control
● Mirror Image Flip
● Vertical Image Flip
● AV2 Auto Switching for backup camera
● Copper Stand: 360° / Height Adjustment
● U-Shape mounting bracket ( 800 / 802 Only )
● VESA 75mm mounting holes
● 26-Pin heavy-duty connector with connector locking
● Anti Glare Coating
● Supports 9V DC ~ 36V DC
● "E" Mark Certified for Automotive use
4 │ Specification

Specifications
Display Specifications

● Screen Size : Diagonal 8” ( 4 : 3 )

● Physical Resolution : 800 ( H ) x 600 ( V )
● Pixel Pitch : 0.0675 ( H ) x 0.2025 ( V ) ( in )
● Dot Resolution : 2400 x 600 = 1,440,000 ( dots )
● Supported Resolution : 640 x 480 ~ 1920 x 1080
● Supported Refresh : 60~75Hz
● LCD Panel Brightness :
800 / 805 LCD Panel Brightness : 400cd/m²
802 LCD Panel Brightness : 1000cd/m²
● Contrast Ratio : 500 : 1
● Response Time : 10~15ms
● Viewing Angel : Vertical : 120゜ / Horizontal : 140゜
● Colors : 6-bits ( 262,144 colors )

Physical Specifications

● Video Source Input

— RGB analog male connector ( 15-Pin D-SUB ) x 1
— RCA composite video female connector x 2
— HDMI input connector x 1 ( TSH/YH Only )

● Audio Source Input

— RCA audio female connector x 2
— DC 3.5 mini stereo plug x 1
— HDMI audio x 1 ( TSH/YH Only )

● Touch Panel ( Input / Output )

— USB connector x 1 ( TSV/TSH Only )

● Power Source Input

— Single 12V DC_IN ( Supports 9V~36V )

● External Buttons Input

— OSD buttons for Power / Select / Menu / Increase / Decrease / Dimmer
— Power button for power switch

● Dimension ( In )
800 / 802 : 8.98 ( L ) x 6.46 ( H ) x 1.42 ( D ) In
805 : 7.87 ( L ) x 6.42 ( H ) x 1.44 ( D ) In

● Weight ( lb )
800 / 802 : 2.64 lbs
805 : 1.87 lbs

Electrical Specifications

● Operating Voltage Range : DC 9V ~ 36V 2A

● Power Supply : DC 12V
● Power Consumption :
Suspended Mode < 2W ( Max )
Continuous Mode < 14W ( Max )
● Audio Input < 150MV

Other Specifications

● Operating Temperature : -4℉ ~ 158℉

● Storage Temperature : -22℉ ~ 176℉
● FCC, CE, E13 Certification
● ROHS Compliant
● 24 Month Warranty
 Quick - Start │ 5

Optional Mounting Stand ( 800 / 802 Only )

Step 1.
Slide Monitor into optional mounting stand

Step 2.
Secure “ Height ” position by adjusting Knob

Step 3.
Secure “ Tilt ” position by adjusting Knob

Optional Mounting Stand ( 805 Only )

Step 1.
Slide Monitor into optional mounting stand

Step 2.
Secure “ Height ” position by adjusting Knob

Step 3.
Secure “ Tilt ” position by adjusting Knob

U Type Stand ( 800 / 802 Only )

Secure “ Tilt ” position by adjusting knob

Please install the knob with

two washers as shown

Create VGA Source

Step 1.
Attach the 26-Pin connector to the monitor

Step 2.
Attach the D-Sub 15-Pin connector to your
computer’s analog VGA output connector

Create Power Source

Insert Power Adapter as show

6 │ Quick - Start
Create Audio / Video Source
Step 1.
Attach your “ Video Source one ”
( e.g. VCR, Video Game Console)
to the Yellow RCA connector marked Video 1

Step 2.
Attach your “ Video Source two ”
( e.g. VCR, Video Game Console)
to the Yellow RCA connector marked Video 2

Step 3.
Attach your “ Audio Source ” to the White / Red
connectors marked Audio.
The sound will be outputted through the
monitor’s internal speaker

Step 4.
Attach your “ PC Source ” to the back VGA
connector

Step 5.
Attach the mini stereo jack marked “ PC
Audio ” to your computer’s earphone jack

Touchscreen Installation
( 800 / 802 / 805 TSV Only )
Please download and install the Touchscreen
driver for your operating system from our
website WWW.XENARC.COM.

Attach the USB plug to your USB connector

Secure Knob Installation

Please use the attached knob and screws to fasten
the cable on the rear of cover

Note : Please use the included U-Shape metal bracket

to secure the 26-PIN Connector in applications where a lot of
vibration and movement are involved
 Remote Control │ 7

1. Power Button : Turn the monitor ON or OFF.

2. Mirror Button : Enable or Disable the mirroring of the display.

Continue to press it and choose the mirroring you want.

3. Dimmer Buttom : Dim the brightness of the display by pressing this

key continuosly to set the brightness level of the display.
( Only available when auto sensor is disabled. )

4. Mute Button : Mute the speaker. Press again to restore the sound
of the speaker.

5. Display Button : Display the current input signal on the screen.

6. Sleep Button : Enable or Disable the sleep timer. Press this button
to select and set the time to turn off the monitor automatically.

7. Picture Button : Enable or select the picture mode you prefer.

Press this button and then you can select Standard, user, bright,
or soft.
8. PC auto Button : Enable to adjust the picture automatically, only
available in VGA mode.

9. Menu Button : Enable the OSD menu. Press this button again to
exit.

10. Source Button : Enable to switch to different source input.

11. Vol+ / Vol- Button : Increase or Decrease the Volume.

12. Up / Down Button ( ▲ / ▼ ) : Navigate Up or Down in OSD menu.

13. Left / Right Button ( ◄ / ► ) : Navigate Left or Right in OSD menu,

as well as decreasing or increasing the value of setting in OSD.

14. Enter Button : Confirm the setting or selection.

8 │ Remote Control

Instructions for remote controller shortcuts

1. Dimmer ( Adjust the brightness )

By pressing the Dimmer button, it will adjust the brightness level from
0, 20, 40, 60, 80 and 100.
Default is 100 ( Only available when auto sensor is disabled )

2. Sleep ( Set the sleep time out )

Select the time to automatically turn off the monitor.
The minimum is 15 minutes and the maximum is 120 minutes.

3. Picture ( Set the modes of the picture )

Enable to select the picture modes you prefer.
Press this button and then you can select standard, user, bright, or soft.

4. PC AUTO ( Auto adjust, only on VGA )

By pressing PC AUTO, it will auto adjust the image.

5. Source ( Select the source )

Press this button to select the input signal to display.
If one of these modes is disabled in OSD menu, please setup
under ( Function → Source Enable )
 Remote Control │ 9

6. Mirror ( Image mirror )

Enable or Disable the mirroring of the display. Continue to press it
and choose the mirroring mode you wish to display.

7. Mute
Mute the speaker.
Press again to restore the sound of the speaker.

8. Display ( Display mode )

Display the current input signal on the screen.

9. VOL- / VOL+
Volume adjustment
10 │ Hardware Installation

Buttons description:
1. Power Button : Press to turn ON or OFF the monitor.

2. Select Button : Press to select the input signal to display.

Press the left ( ◄ ) or right ( ► ) to highlight the input source
desired and then press menu button to make the selection.

3. Menu Button : Press the button to show the OSD menu.

And then press the left ( ◄ ) or right ( ► ) to navigate through
the menu.
Press “ Select ” button to go through a list of settings and
options.
Press the left ( ◄ ) or right ( ► ) buttons to change the values
of settings.
Press Menu button again to leave the OSD menu.

4. Right Button : Press this button to increase volume/dimmer or

the value of settings inside the OSD menu.

5. Left Button : Press this button to decrease volume/dimmer or

the value of settings inside the OSD menu.

6. Dimmer : This button controls display brightness.

OSD ( On-screen display ) Menu

Press MENU to display the OSD on the screen, then press
UP / DOWN ( or LEFT / RIGHT from the front control panel )
to highlight a different category. Press ENTER ( or Source ) to
adjust the selected highlighted category. Under the selected item
page, press UP / DOWN ( or Source ) to select the item from the
list, use LEFT / RIGHT to adjust. To select the sub-menu, please
press LEFT to enter to the sub-menu.
 Hardware Installation │ 11

OSD ( On-Screen Display ) Menu

The Settings and options in the OSD menu are categorized into 6
Categories : Color, Adjust, OSD, Setup, Function, Sound

1. Colors
● Brightness : Adjust brightness by pressing Left ( ◄ ) or Right ( ► )
buttons. Increase the number for a higher level of brightness.
Decrease the number for a lower level of brightness.

● Contrast : Adjust brightness by pressing Left ( ◄ ) or Right ( ► )

buttons. Increase the number for a higher level of contrast.
Decrease the number for a lower level of contrast.

● Sharpness : Adjust sharpness by pressing left or right buttons.

Press left to decrease sharpness and right to increase the level
of sharpness.

● Color Temp : Set the color temp to the desired setting : 6500K,
9300K and User.

● Backlight : Adjust backlight intensity by pressing Left ( ◄ ) or Right

( ► ) buttons. Increase the number for a higher level of backlight
output. Decrease the number for a lower level of backlight output.
Only works when Auto sensor is turned off.

2. Adjust
● Auto Config : Adjust display automatically.

● H Position : Adjust the Horizontal position by pressing the left or

right buttons.

● V Position : Adjust the Vertical position by pressing the left or

right buttons.

● Phase : Phase ( fine ) adjustment. Image flickering can be removed

through changing this setting (only vaild for VGA setting )

● Clock : Adjust the horizontal sync width of the screen image.

12 │ Hardware Installation

3. OSD
● H Position : Adjust the OSD Horizontal position by pressing the left or
right buttons.

● V Position : Adjust the OSD Vertical position by pressing the left or

right buttons.

● OSD Timeout : Adjust the time out of the OSD.

● Transparent : Adjust the transparency of the OSD screen image.

● LR Key : Set front Left/Right buttons as Volume or Dimmer Control.

● Key Backlight : Adjust the buttons backlight intensity.

4. Setup
● CCD/AV2 First : Set whether to have monitor switch to
CCD/AV2 signal automatically if a signal is present. ( Default
is OFF )

● Source Info : Select to turn OFF or turn ON displaying of On Screen

Source Information.

● Source Name : Display the source of input signal. If it is ON, it will

display the information on the left corner of the screen when Display
button is pressed on remote control. ( Default ON )

● Mirror Hor : Adjust the horizontal mirroring position. If it is ON, the

image will be on the left and right side. ( Default ON ).

● Mirror Ver : Adjust the vertical mirroring position. If it is ON, the

image will be on the left and right side. ( Default ON )
 Hardware Installation │ 13

5. Function
● Reset : Reset to Factory default setting.

● Display Ratio : Select the display mode to 16:9, 4:3 and Auto.

● Sleep : Select the time to automatically turn off the monitor.

The minimum is 15 minutes and the maximum is 120 minutes.

● Keypad : The function allows you to disable or enable the buttons

at the front of the monitor. Power, Menu, Select, Dimmer, Left, and
Right buttons can be disabled or enabled.

● Source Enable : Select to Enable or disable the input signal. If

an input signal is turned off, the source will be disabled.

● Touch Controller : Switch the power source for touch control board.

6. Sound
● Volume : Adjust the audio volume of built-in speaker.

● Mute : Enable or disable muting of built-in speaker.

● HDMI Input : Select the audio source while in HDMI input mode.
When set to HDMI, the built-in speaker will output the digital audio
signal from HDMI.
When set to Analog, the built-in speaker will output the analog audio
signal from the mini stereo jack marked as “ PC Audio “
※The HDMI output option is only available for TSH / YH models
14 │ Additional Info

NOTE:
NOTE 1 :
If you are trying to connect the monitor to a laptop computer, please
make sure to enable the 15-PIN D-SUB external monitor output located
at the back of your laptop computer. Some laptop computers have
three modes: Laptop Display Only, Laptop Display plus External
Monitor, and External Monitor Only. If this is the case, please switch
to the External Monitor Only mode.

NOTE 2 :
Touch Screen device driver must be installed onto your computer in
order for the Touch Screen to become operational. Touch Screen
driver and software for different operating systems can be downloaded
from our website at WWW.XENARC.COM.

NOTE 3 :
The maximum voltage supported by the monitor is 36V DC. Feeding the
monitor with higher voltage will damage the monitor and void the
warranty. Please use a fused power source if you decide to wire the
monitor directly to your car’s electrical system. It is also crucial that
you check the polarity on the connection.

NOTE 4 :
If the monitor is not displaying the VGA signal properly, the VGA signal
might be out of range. Please try changing your display refresh rate to
60, 70, 72, or 75 Hertz.

NOTE 5 :
Please note that the LCD screen is made with high-precision
technology. However black points or bright points of light ( red, blue, or
green ) may appear constantly on the LCD screen, and irregular
colored stripes or brightness may appear on the LCD screen.
This is not malfunction. ( Effective dots : more the 99.999% )

For Technical Support , Please contact us at:

Xenarc Technologies Corp.
Toll Free : 888 - 656 - 6536
E - Mail : support @ xenarc.com
Website : www.xenarc.com

The length of the mounting screw. 【 M4 x 8 mm (max) 】

( common between right side and left side )
 Owner’s Record │ 15

Owner’s Record
The model and serial number are located on the rear of the unit.
Please record these numbers in the spaces provided below, as
well as the dealer name, address, and telephone number.
Please refer to these records whenever speaking to your dealer
regarding this product.

Model Number :

Serial Number :

Dealer Name :

Street Address :

City :

State :

Zip :

Phone Number :

Purchase Date :

All rights reserved. Reproduction in whole or in part without permission is prohibited.