®

SERIES DM | DIGIMAG® DIFFERENTIAL PRESSURE TRANSMITTER

BENEFITS/FEATURES
• Reduced installation time through zero and span controls that provides quick and easy calibration
• Fast and easy setup and calibration with push-button zero and span controls
• Immediate corrective action can be taken by local alerts via the easy-to-read LCD display
• Reduces upgrade installation costs and simplifies field upgrade from a Magnehelic® gage, as both use the same diameter
cutout

APPLICATIONS DESCRIPTION
• Differential pressure across filters The Series DM DigiMag® Differential Pressure Transmitter senses
• Fan control the pressure of air and compatible gases and sends a standard 4-20
• Static pressures in ducts or buildings mA output signal. The DM housing is specifically designed to mount
• Room pressurization monitoring in the same diameter cutout as a standard Magnehelic® gage. A wide
range of models are available factory calibrated to specific ranges. The
polycarbonate molded housing features integral pressure connections,
which reduces installation time. Digital push-button zero and span
simplify calibration over typical turn-potentiometers. A single push-button
allows field selection of 4 to 6 engineering units, depending on the range.

SPECIFICATIONS
Service Air and non-combustible, compatible gases.
Wetted Materials Consult factory.
Housing Material Polycarbonate.
Accuracy ±1% FSO for all ranges except 0.25 in w.c. @ ±2% FSO, and ranges at or below ±0.1 in w.c. @ ±4% FSO.
Stability < ±1%/year FSO.
Pressure Limits Ranges > 1 in w.c.: 6 psi max operation, 6 psi burst; Ranges ≤ 1 in w.c.: 3.6 psi max operation, 6 psi burst.
Temperature Limits -4 to 158°F (-20 to 70°C).
Thermal Effect 0.036% FS/°C (0.02% FS/°F).
Power Requirements 10-35 VDC (2-wire).
Output Signal 4-20 mA (2-wire).
Zero and Span Adjustments Push-button.
Loop Resistance 0 to 1250 Ω max.
Current Consumption 21 mA max.
Electrical Connections Screw-type terminals.
Process Connections Male ports on side for 1/8˝, 3/16˝, 1/4˝, 5 mm, 6 mm ID flexible tubing.
Enclosure Rating NEMA 4X (IP66).
Mounting Orientation Not sensitive to position.
Size 5˝ OD (127 mm) x 1.9˝ (48 mm) deep.
Weight 7.04 oz (200 g).
Agency Approvals CE.
DIMENSIONS WIRING DIAGRAM

HIGH PRESSURE PORT

+ +
1 [25.40]
SERIES DM - + - POWER
PRESSURE - SUPPLY
TRANSMITTER RECEIVER 10-35 VDC
LOW PRESSURE PORT

1/2 [12.70] 15/64

[5.84] 5 [127.00]
1-43/64
[42.34]

HOW TO ORDER
Use the bold characters from the chart below to construct a product code.

DM -202 -NIST

SERIES OPTIONS
DM: DigiMag® differential pressure transmitter -FC: Factory calibration certificate
-NIST: NIST traceable calibration certificate
-SS: 304 brushed SS bezel
ACCURACY
001: 0.1 in w.c.
002: 0.25 in w.c.
003: 0.5 in w.c.
004: 1 in w.c.
005: 2 in w.c.
007: 3 in w.c.
008: 5 in w.c.
019: -0.05-0-0.20 in w.c.
201: ±0.1 in w.c.
202: ±0.25 in w.c.
203: ±0.5 in w.c.
052: 30 Pa
053: 60 Pa
056: 250 Pa
059: 1250 Pa
252: ±30 Pa
253: ±60 Pa
256: ±250 Pa
259: ±1250 Pa
082: 6 mm w.c.
282: ±6 mm w.c.

ORDER ONLINE TODAY!

TODAY!
dwyer-inst.com/Product/SeriesDM
DWYER INSTRUMENTS, INC.
©Copyright 2021 Dwyer Instruments, Inc.
Printed in U.S.A. 9/21 DS-DM

Important Notice: Dwyer Instruments, Inc. reserves the right to make changes to or discontinue any product or service identified in this publication without notice. Dwyer advises its customers to obtain the
latest version of the relevant information to verify, before placing any orders, that the information being relied upon is current.