& KAB E L B R I D E N

KABEL S C H E L L E N
E LDA X
K ABE LV E RL E G E
S Y S T EME & C O
 Î Our products are used by customers in over 40 countries
HOLDING POWER to protect the electrical supply to vital operations and
ensure systems keep running safely and securely in the
– TRIED, TESTED, event of a short circuit

Î Our products are specified and installed across a broad

TRUSTED AND spectrum of industries and installation types, from
nuclear power plants to oil rigs; city centre substations
RELIED UPON to major rail, road and air transport infrastructure
projects

We are widely recognised Î Our in-house engineering capabilities allow for constant
product development and innovation, and the creation of
as the global leader in the bespoke solutions for individual project specifications
design and manufacture Î Our manufacturing headquarters in North Yorkshire,
England are ISO9001, ISO14001 and ISO45001
of safety critical electrical certified and all our cable cleats are manufactured to
cable cleats and fixing IEC61914:2015 and short circuit tested as standard prior
to being brought to market. We also offer project specific
solutions. short circuit testing

Î Our brand is built upon a culture of trust and integrity,

and our reputation reflects this

Î We are an equal opportunities employer, and are

committed to lessening our environmental impact and
carbon footprint in every aspect of our business

(American Bureau Our Cable cleats are compliant with the

of Shipping) requirement of London Underground
Type Approval. Standard 1-085. Product Register No. 361.
VRT+06 4CG8 VRQ+03 4CG8

02
Alpha™ 06

Vulcan+™ 08

Vulcan+™ Quad 10

Vulcan+™ Twist Foot 12

Emperor™ Trefoil 14

Emperor™ Single 16

Flexi-Strap™ 18

Protect™ 20

Trident® 22

Colossus™ 24

Centaur® 26

Centaur® Strap 28

Cable Guide Clamp 30

Atlas™ 32

Vari-Cleat ™
34

No Bolts Cleat™ 36

1A 38

2A 40

1F 42

2F+ 44

Phoenix® 46

Matrix™ 48

Bespoke 49

Mk2 Hanger 50

Convex Hanger 51

Pegasus 52

Triplex Cable Surround 54

Single Bolt Fixing Clamp 56

Various Plastic Products 57

Jointers Tools 63

Ladder Adaptors 65

EP2019/01

03
 QUICK SELECTION GUIDE

Alpha™ page Vulcan+™ page Vulcan+™ page Vulcan+™ page Emperor™ page
06 08 Quad 10 Twist Foot 12 Trefoil 14

Emperor™ page Flexi-strap™ page Protect™ page Trident™ page Colossus™ page
Single 16 18 20 22 24

Centaur ® page Centaur ® page Cable Guide page Atlas™ page Vari-cleat™ page
26 Strap 28 Clamp™ 30 32 34

No Bolts page One & Two Hole page One & Two Hole page Phoenix® page Matrix™ page
Cleat™ 36 Cableclamps - 38 Cableclamps - 42 46 48
Aluminium Non Metallic

Mk2 Hanger page Convex Hanger page Pegasus page Triplex Cable page Single Bolt page
50 51 Hanger 52 Surround 54 Fixing Clamp 56

04
 GRAPH BELOW IS FORFOR TREFOIL ONLY

TRIDENT™ ALPHA™ VULCAN+™ EMPEROR™ COLOSSUS™

Light duty Polymeric Light duty Compact Standard duty Heavy duty Compact Heavy duty Compact
cleat Aluminium Compact Stainless Stainless steel Polymeric and
steel Stainless steel

ELLIS CLEAT RANGE. CLEATS SPACED AT 300MM

Ellis Cleat Range. Cleats Spaced at 300mm

200

180

160

140
Colossus
Emperor
120
Peak current (kA)

Vulcan+
Alpha
100
Trident
80

60

40

20

0
0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170 180
Cable Diameter (mm)

ELLIS CLEAT RANGE. CLEATS SPACED AT 600MM

Ellis Cleat Range. Cleats Spaced at 600mm

200

180

160

140
Colossus
Emperor
120
Peak current (kA)

Vulcan+
Alpha
100
Trident
80

60

40

20

0
0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170 180
Cable Diameter (mm)

The above graphs can be used to provide a general indication of relative cleat strengths, for accurate cleat specification
refer to the Ellis online calculator or black book. Also check product datasheets for actual short circuit test results.

05
 ALPHA ™

Aluminium Trefoil Cleats

Patent No. UK Patent GB 240 5900

Î 6000 SERIES ALUMINIUM FRAME

Î ZINC PLATED STEEL M8 CLOSURE FIXINGS
Î POLYESTER COATED FRAMES ARE
AVAILABLE ON REQUEST
Î SHORT CIRCUIT AND MECHANICALLY TESTED
TO IEC 61914
Î ABS APPROVED AND UL LISTED

CABLE RANGE
DIMENSIONS (mm)
PART NO. PART NO. TREFOIL WEIGHT
ALUMINIUM BASE POLYMER BASE MIN Ø MAX Ø FIXING HOLES (g)
W H D
(mm) (mm) (D1)
ALP01-AN0 ALP01-AN1 23.2 25.1 76 93 48.5 1 x M10 168
ALP02-AN0 ALP02-AN1 25.1 27.1 79 96 48.5 1 x M10 178
ALP03-AN0 ALP03-AN1 27.1 29.3 82 101 48.5 1 x M10 185
ALP04-AN0 ALP04-AN1 29.3 31.7 86 105 48.5 1 x M10 195
ALP05-AN0 ALP05-AN1 31.7 34.2 91 110 48.5 1 x M10 205
ALP06-AN0 ALP06-AN1 34.2 37.0 96 116 48.5 1 x M10 217
ALP07-AN0 ALP07-AN1 37.0 40.0 101 121 48.5 1 x M10 229
ALP08-AN0 ALP08-AN1 40.0 43.2 106 127 48.5 1 x M10 241
ALP09-AN0 ALP09-AN1 43.2 46.7 113 134 48.5 1 x M10 255
ALP10-AN0 ALP10-AN1 46.7 50.5 119 141 48.5 1 x M10 272
ALP11-AN0 ALP11-AN1 50.5 54.6 127 148 48.5 1 x M10 288
ALP12-AN0 ALP12-AN1 54.6 59.0 135 156 48.5 1 x M10 307
ALP13-AN0 ALP13-AN1 59.0 63.8 144 165 48.5 1 x M10 327
ALP14-AN0 ALP14-AN1 63.8 69.0 153 175 48.5 1 x M10 348
ALP15-AN0 ALP15-AN1 69.0 74.6 163 186 48.5 1 x M10 372

ALUMINIUM BASE

POLYMER BASE
(WITH POLYESTER COATED FRAME)

06
 TESTING SUMMARY

Alpha Cleats have been tested in line with the International Standard ‘Cable Cleats for Electrical Installations’ IEC
61914:2015. Typical results are detailed below, please note that these testing values are maximums and safety
factors appropriate to your application should be used:

CLASSIFICATION UNITS /
PROPERTY TEST DATA
CLAUSE IEC 61914 CLASSIFICATION

CLEAT TYPE 6.1.1, 6.1.3 METALLIC / COMPOSITE -

TEMP. FOR PERMAMENT

6.2 °C -40 to +60
APPLICATION
PASS
APPLICABLE TO POWDER
UV RESISTANCE 6.5.1 XENON ARC METHOD A
COATED AND POLYMER BASE
OPTIONS

CORROSION RESISTANCE 6.5.2 REFER TO ELLIS REFER TO ELLIS

IMPACT RATING 6.3.5, VERY HEAVY PASS

FLAME PROPAGATION TEST 10.0, 10.1 APPLICATION TIME ≥30s PASS

AXIAL LOAD RATING 6.4.3, 9.4 NEWTONS (N) REFER TO ELLIS

HORIZONTAL - 500N
LATERAL LOAD RATING 6.4.2, 9.3 NEWTONS (N)
VERTICAL - 500N

RESISTANCE TO CLEATS AT 300MM INTERVALS 82kA

ELECTROMECHANICAL FORCE 6.4, 6.4.4, 9.5 (WITHSTANDING ONE SHORT (REPORT No. PDL-18.184)
(SHORT CIRCUIT TESTING) CIRCUIT) CABLE OD = Ø35mm

RESISTANCE TO CLEATS AT 600MM INTERVALS 73.4kA

ELECTROMECHANICAL FORCE 6.4, 6.4.5, 9.5 (WITHSTANDING MORE THAN ONE (REPORT No. PDL-18.122.2)
(SHORT CIRCUIT TESTING) SHORT CIRCUIT) CABLE OD= Ø36mm

LATERAL LOAD LATERAL LOAD

‘VERTICAL’ DIRECTION ‘HORIZONTAL DIRECTION’

LONDON UNDERGROUND
Alpha Cable Cleats are compliant with
the requiremnts of LUL-1085. Product
Conduit & cable hardware 4CG8 with
register number 360.
AH-2 & wet locations. Listed sizes:
ALP01-AN0 to ALP15-AN0.

This information is subject to change without notice. The information provided has been generated in laboratory conditions, as such results in use may vary.

07
 VULCAN+ ™

Stainless Steel Cable Cleats

Patent No. UK Patent GB 236 1029

Î 316L STAINLESS STEEL FRAME AND FIXINGS

Î SOFT LSF POLYMERIC LINER PROTECTS
CABLE SHEATH
Î CAPTIVE CLOSURE FIXINGS FOR FAST
INSTALL
Î SHORT CIRCUIT AND MECHANICALLY
TESTED TO IEC 61914
Î ABS AND DNV TYPE APPROVED AND
ALSO UL LISTED

CABLE RANGE CABLE RANGE

DIMENSIONS (mm)
PART TREFOIL SINGLE WEIGHT
NO. MIN Ø MAX Ø MIN Ø MAX Ø FIXING (g)
W H D P
(mm) (mm) (mm) (mm) HOLES (D1)
VRT+00 19 24 30 42 60 93 54 N/A 1 x M10 251
VRT+01 23 28 38 50 63 98 54 N/A 1 x M10 258
VRT+02 27 32 43 58 72 106 54 N/A 1 x M10 269
VRT+03 30 35 49 64 79 112 54 N/A 1 x M10 279
VRT+04 33 38 55 70 85 118 54 N/A 1 x M10 284
VRT+05 36 42 58 75 96 125 54 N/A 1 x M10 319
VRT+06 40 46 63 84 105 133 54 N/A 1 x M10 331
VRT+07 44 50 73 90 112 140 54 N/A 1 x M10 391
VRT+08 48 55 83 100 121 149 54 N/A 1 x M10 405
VRT+09 51 58 86 104 126 154 54 N/A 1 x M10 411
VRT+10 55 62 88 110 134 162 54 50 3 x M10 442
VRT+11 59 66 90 115 143 170 54 50 3 x M10 453
VRT+12 63 70 100 125 152 177 54 50 3 x M10 460
VRT+13 67 74 107 132 161 185 54 75 3 x M10 524
VRT+14 71 78 120 145 169 192 54 75 3 x M10 536
VRT+15 74 82 125 150 176 199 54 75 3 x M10 542
VRT+16 77 85 132 153 183 205 54 75 3 x M10 544
VRT+17 81 89 136 156 190 216 54 75 3 x M10 618
VRT+18 85 93 139 159 200 225 54 75 3 x M10 628
VRT+19 89 97 142 162 200 235 54 75 3 x M10 637
VRT+20 93 101 160 170 215 240 54 75 3 x M10 646

08
 TESTING SUMMARY

Vulcan+ Cleats have been tested in line with the International Standard ‘Cable Cleats for Electrical Installations’
IEC 61914:2015. Typical results are detailed below, please note that these testing values are maximums and safety
factors appropriate to your application should be used:

CLASSIFICATION UNITS /
PROPERTY TEST DATA
CLAUSE IEC 61914 CLASSIFICATION

CLEAT TYPE 6.1.3 COMPOSITE -

TEMP. FOR PERMAMENT

6.2 °C -40 to +60
APPLICATION

UV RESISTANCE 6.5.1.2 XENON ARC METHOD A PASS

316L STAINLESS STEEL

CORROSION RESISTANCE 6.5.2.2 HIGH
HAS≥16% CHROMIUM

IMPACT RATING 6.3.4 HEAVY PASS

FLAME PROPAGATION TEST 10.0, 10.1 APPLICATION TIME ≥30s PASS

150N - TREFOIL
AXIAL LOAD RATING 6.4.3, 9.4 NEWTONS (N)
45N - SINGLE

HORIZONTAL - 200N
LATERAL LOAD RATING 6.4.2, 9.3 NEWTONS (N)
VERTICAL -650N

134kA
RESISTANCE TO CLEATS AT 300MM INTERVALS (REPORT No. PDL-18.122.1)
ELECTROMECHANICAL FORCE 6.4, 6.4.5, 9.5 (WITHSTANDING MORE THAN ONE
(SHORT CIRCUIT TESTING) SHORT CIRCUIT)
CABLE OD= Ø36mm

115kA
RESISTANCE TO CLEATS AT 600MM INTERVALS (REPORT No. PDL-16.164.3)
ELECTROMECHANICAL FORCE 6.4, 6.4.5, 9.5 (WITHSTANDING MORE THAN ONE
(SHORT CIRCUIT TESTING) SHORT CIRCUIT)
CABLE OD= Ø36mm

LATERAL LOAD LATERAL LOAD

‘VERTICAL’ DIRECTION ‘HORIZONTAL DIRECTION’

LONDON UNDERGROUND
Vulcan+ Cable Cleats are compliant
with the requiremnts of LUL-1085.
Conduit & cable hardware 4CG8 with
Product register number 361.
AH-2 & wet locations. Listed sizes:
VRT+00 to VRT+18.

This information is subject to change without notice. The information provided has been generated in laboratory conditions, as such results in use may vary.

09
 VULCAN+ QUAD ™

Patent No. UK Patent GB 236 1029

Î 316L STAINLESS STEEL FRAME AND FIXINGS

Î SOFT LSF POLYMERIC LINER PROTECTS CABLE
SHEATH
Î CAPTIVE CLOSURE FIXINGS FOR FAST INSTALL
Î SHORT CIRCUIT AND MECHANICALLY TESTED TO
IEC 61914
Î ABS APPROVED AND ALSO UL LISTED

CABLE RANGE DIMENSIONS (mm)

PART NO. MIN Ø MAX Ø FIXING HOLES WEIGHT (g)
W H D P
(mm) (mm) (D1)
VRQ+01 23 25 68 110 54 N/A 1 x M10 284
VRQ+02 26 27 70 113 54 N/A 1 x M10 286
VRQ+03 28 31 78 128 54 N/A 1 x M10 318
VRQ+03A 31 35 90 138 54 N/A 1 x M10 350
VRQ+04 35 42 103 148 54 N/A 1 x M10 378
VRQ+05 43 47 120 165 54 N/A 1 x M10 452
VRQ+06 48 50 121 170 54 N/A 1 x M10 467
VRQ+07 51 57 140 190 54 50 3 x M10 486
VRQ+08 58 63 150 200 54 50 3 x M10 499
VRQ+09 64 70 170 218 54 75 3 x M10 581

10
 TESTING SUMMARY

Vulcan+ Cleats have been tested in line with the International Standard ‘Cable Cleats for Electrical Installations’
IEC 61914:2015. Typical results are detailed below, please note that these testing values are maximums and safety
factors appropriate to your application should be used:

CLASSIFICATION UNITS /
PROPERTY TEST DATA
CLAUSE IEC 61914 CLASSIFICATION

CLEAT TYPE 6.1.3 COMPOSITE -

TEMP. FOR PERMAMENT
6.2 °C -40 to +60
APPLICATION
UV RESISTANCE 6.5.1.2 XENON ARC METHOD A PASS
316L STAINLESS STEEL
CORROSION RESISTANCE 6.5.2.2 HIGH
HAS≥16% CHROMIUM

IMPACT RATING 6.3.4 HEAVY PASS

FLAME PROPAGATION TEST 10.0, 10.1 APPLICATION TIME ≥30s PASS

AXIAL LOAD RATING 6.4.3, 9.4 NEWTONS (N) 100

HORIZONTAL - 100N
LATERAL LOAD RATING 6.4.2, 9.3 NEWTONS (N)
VERTICAL -350N
134kA
RESISTANCE TO CLEATS AT 300MM (REPORT No. PDL-
ELECTROMECHANICAL FORCE 6.4, 6.4.5, 9.5 INTERVALS 18.122.1)
(WITHSTANDING MORE THAN ONE
(SHORT CIRCUIT TESTING)
SHORT CIRCUIT) CABLE OD= Ø36mm
(VRT+)
115kA
RESISTANCE TO CLEATS AT 600MM (REPORT No. PDL-
ELECTROMECHANICAL FORCE 6.4, 6.4.5, 9.5 INTERVALS 16.164.3)
(WITHSTANDING MORE THAN ONE
(SHORT CIRCUIT TESTING)
SHORT CIRCUIT) CABLE OD= Ø36mm
(VRT+)

LATERAL LOAD LATERAL LOAD

‘VERTICAL’ DIRECTION ‘HORIZONTAL DIRECTION’

LONDON UNDERGROUND
Vulcan+ Cable Cleats are compliant with
the requiremnts of LUL-1085. Product
Conduit & cable hardware 4CG8 with
AH-2 & wet locations. Listed sizes:
register number 361.
VRQ+01 to VRQ+09.

This information is subject to change without notice. The information provided has been generated in laboratory conditions, as such results in use may vary.

11
 VULCAN+ TWIST FOOT ™

Patent No. UK Patent GB 236 1029

Î BASE FIXING KIT DESIGNED FOR FAST

INSTALL ON 41X41 AND 41X21 UNISTRUT
CHANNEL/LADDER
Î CLEAT COMES WITH ALL FIXINGS IN
PLACE READY FOR INSTALL, NO EXTRA
FIXINGS ARE REQUIRED ON SITE
Î FIXING KIT CAN BE SUPPLIED IN A4
STAINLESS STEEL, GLAVANISED STEEL
OR ZINC PLATED STEEL
Î SHORT CIRCUIT AND MECHANICALLY
TESTED TO IEC 61914 - REFER TO VRT+
AND VRQ+ DATA SHEETS

VRT+ TWIST FOOT OPTIONS

CABLE RANGE TREFOIL CABLE RANGE SINGLE DIMENSIONS (mm) WEIGHT
PART NO.
MIN Ø (mm) MAX Ø (mm) MIN Ø (mm) MAX Ø (mm) W H D (g)
VRT+00TFM10-X 19 24 30 42 60 96 54 301
VRT+01TFM10-X 23 28 38 50 63 102 54 308
VRT+02TFM10-X 27 32 43 58 72 109 54 319
VRT+03TFM10-X 30 35 49 64 79 115 54 329
VRT+04TFM10-X 33 38 55 70 85 121 54 334
VRT+05TFM10-X 36 42 58 75 96 128 54 369
VRT+06TFM10-X 40 46 63 84 105 137 54 381
VRT+07TFM10-X 44 50 73 90 112 143 54 441
VRT+08TFM10-X 48 55 83 100 121 152 54 455
VRT+09TFM10-X 51 58 86 104 126 158 54 461
VRT+10TFM10-X 55 62 88 110 134 166 54 492
VRT+11TFM10-X 59 66 90 115 143 174 54 503
VRT+12TFM10-X 63 70 100 125 152 181 54 510
VRT+13TTFM10-X 67 74 107 132 161 188 70 525
VRT+14TTFM10-X 71 78 120 145 169 195 70 636
VRT+15TTFM10-X 74 82 125 150 176 199 70 642
VRT+16TTFM10-X 77 85 132 153 183 208 70 644
VRT+17TTFM10-X 81 89 136 156 190 219 70 718
VRT+18TTFM10-X 85 93 139 159 200 228 70 728
VRT+19TTFM10-X 89 97 142 162 200 238 70 737
VRT+20TTFM10-X 93 101 160 170 215 243 70 746

‘X’ DENOTES FIXING MATERIAL, OPTIONS ARE AS FOLLOWS:

4 = A4 STAINLESS STEEL | G = GALVANISED STEEL | Z = ZINC PLATED STEEL
E.G A VRT+04 WITH STAINLESS STEEL TWIST FOOT FIXINGS BECOMES: VRT+04TFM10-4
12
 INSTALLATION OVERVIEW

1) Lower the cleat through the 2) Once lowered twist the 3) Tighten the M10 bolt in the base of the
gap in the channel. cleat 90°. cleat.

4) As the bolt is tightened 5) The cleat is now securley fastened to the structure and
the channel nut will move is ready to accept the cables.
up the twist foot base and
grip onto the channel.

This information is subject to change without notice. The information provided has been generated in laboratory conditions, as such results in use may vary.

13
 EMPEROR ™

TREFOIL
Stainless Steel Cable Cleats
Patent No. UK Patent GB 233 9237

Î 316L STAINLESS STEEL FRAME AND FIXINGS

Î SOFT LSF POLYMERIC LINER PROTECTS
CABLE SHEATH
Î CAPTIVE CLOSURE FIXINGS FOR FAST INSTALL
Î SHORT CIRCUIT AND MECHANICALLY TESTED
TO IEC 61914
Î ABS AND DNV TYPE APPROVED AND ALSO
UL LISTED

CABLE RANGE DIMENSIONS (mm)

WEIGHT
PART NO. MIN Ø MAX Ø FIXING HOLES
W H D P (g)
(mm) (mm) (D1 & D2)
ER19-23 19 23 96 83 54 25 2 x M10 + 1 x M12 425
ER23-28 23 28 96 83 54 25 2 x M10 + 1 x M12 425
ER27-32 27 32 97 88 54 25 2 x M10 + 1 x M12 440
ER30-35 30 35 99 91 54 25 2 x M10 + 1 x M12 445
ER33-38 33 38 103 95 54 25 2 x M10 + 1 x M12 460
ER36-42 36 42 124 100 54 50 2 x M10 + 1 x M12 600
ER40-46 40 46 125 106 54 50 2 x M10 + 1 x M12 605
ER44-50 44 50 130 117 54 50 2 x M10 + 1 x M12 630
ER48-55 48 55 132 121 54 50 2 x M10 + 1 x M12 640
ER51-58 51 58 136 128 54 50 2 x M10 + 1 x M12 650
ER55-62 55 62 160 135 54 75 2 x M10 + 1 x M12 810
ER59-66 59 66 163 143 54 75 2 x M10 + 1 x M12 825
ER63-70 63 70 166 151 54 75 2 x M10 + 1 x M12 850
ER67-74 67 74 169 158 54 75 2 x M10 + 1 x M12 850
ER71-78 71 78 172 165 54 75 2 x M10 + 1 x M12 890
ER74-82 74 82 177 171 54 75 2 x M10 + 1 x M12 890
ER77-85 77 85 183 177 54 75 2 x M10 + 1 x M12 905
ER82-88 82 88 191 187 54 75 2 x M10 + 1 x M12 820
ER88-96 88 96 207 203 54 75 2 x M10 + 1 x M12 890
ER96-103 96 103 221 218 54 75 2 x M10 + 1 x M12 940
ER103-111 103 111 237 235 54 75 2 x M10 + 1 x M12 950
ER111-119 111 119 253 250 54 75 2 x M10 + 1 x M12 1010
ER119-128 119 128 265 275 54 75 2 x M10 + 1 x M12 1220

14
 TESTING SUMMARY

Emperor Cleats have been tested in line with the International Standard ‘Cable Cleats for Electrical Installations’
IEC 61914:2015. Typical results are detailed below, please note that these testing values are maximums and safety
factors appropriate to your application should be used:

CLASSIFICATION UNITS /
PROPERTY TEST DATA
CLAUSE IEC 61914 CLASSIFICATION

CLEAT TYPE 6.1.3 COMPOSITE

TEMP. FOR PERMAMENT

6.2 °C -40 to +60
APPLICATION

UV RESISTANCE 6.5.1.2 XENON ARC METHOD A PASS

316L STAINLESS STEEL

CORROSION RESISTANCE 6.5.2.2 HIGH
HAS≥16% CHROMIUM

IMPACT RATING 6.3.5 VERY HEAVY PASS

FLAME PROPAGATION TEST 10.0, 10.1 APPLICATION TIME ≥30s PASS

AXIAL LOAD RATING 6.4.3, 9.4 NEWTONS (N) 400

HORIZONTAL - 650N
LATERAL LOAD RATING 6.4.2, 9.3 NEWTONS (N)
VERTICAL -1000N

195kA
RESISTANCE TO CLEATS AT 300MM INTERVALS (REPORT No. PDL-09.098.2)
ELECTROMECHANICAL FORCE 6.4, 6.4.4, 9.5 (WITHSTANDING ONE SHORT
(SHORT CIRCUIT TESTING) CIRCUIT) CABLE OD= Ø38mm
(IEC 61914:2009)

149kA
RESISTANCE TO CLEATS AT 600MM INTERVALS (REPORT No. PDL-17.137.4)
ELECTROMECHANICAL FORCE 6.4, 6.4.5, 9.5 (WITHSTANDING MORE THAN ONE
(SHORT CIRCUIT TESTING) SHORT CIRCUIT)
CABLE OD= Ø36mm

LATERAL LOAD LATERAL LOAD

‘VERTICAL’ DIRECTION ‘HORIZONTAL DIRECTION’

LONDON UNDERGROUND
Emperor Cable Cleats are compliant
with the requiremnts of LUL-1085.
Conduit & cable hardware 4CG8 with
Product register number 362.
AH-2 & wet locations. Listed sizes:
ER19-23 to ER82-88.

This information is subject to change without notice. The information provided has been generated in laboratory conditions, as such results in use may vary.

15
 EMPEROR ™

SINGLE
Stainless Steel Cable Cleats
Patent No. UK Patent GB 233 9237

Î 316L STAINLESS STEEL FRAME AND

FIXINGS
Î SOFT LSF POLYMERIC LINER PROTECTS
CABLE SHEATH
Î CAPTIVE CLOSURE FIXINGS FOR FAST
INSTALL
Î SHORT CIRCUIT AND MECHANICALLY
TESTED TO IEC 61914
Î ABS AND DNV TYPE APPROVED AND ALSO
UL LISTED

CABLE RANGE DIMENSIONS (mm)

PART NO. MIN Ø MAX Ø FIXING HOLES (D1 & WEIGHT (g)
W H D P
(mm) (mm) D2)
ES32-39 32 39 91 89 54 25 2 x M10 + 1 x M12 450
ES37-45 37 45 96 93 54 25 2 x M10 + 1 x M12 470
ES44-52 44 52 99 98 54 25 2 x M10 + 1 x M12 480
ES51-59 51 59 103 102 54 25 2 x M10 + 1 x M12 490
ES58-66 58 66 109 101 54 25 2 x M10 + 1 x M12 500
ES65-73 65 73 111 103 54 25 2 x M10 + 1 x M12 510
ES73-85 73 85 135 112 54 50 2 x M10 + 1 x M12 640
ES84-94 84 94 135 135 54 50 2 x M10 + 1 x M12 660
ES94-118 94 118 160 150 54 50 2 x M10 + 1 x M12 710
ES118-130 118 130 175 160 54 75 2 x M10 + 1 x M12 900
ES127-150 127 150 180 180 54 75 2 x M10 + 1 x M12 940

16
 TESTING SUMMARY

Emperor Cleats have been tested in line with the International Standard ‘Cable Cleats for Electrical Installations’
IEC 61914:2015. Typical results are detailed below, please note that these testing values are maximums and safety
factors appropriate to your application should be used:

CLASSIFICATION UNITS /
PROPERTY TEST DATA
CLAUSE IEC 61914 CLASSIFICATION

CLEAT TYPE 6.1.3 COMPOSITE -

TEMP. FOR PERMAMENT

6.2 °C -40 to +60
APPLICATION

UV RESISTANCE 6.5.1.2 XENON ARC METHOD A PASS

316L STAINLESS STEEL HAS

CORROSION RESISTANCE 6.5.2.2 HIGH
≥16% CHROMIUM

IMPACT RATING 6.3.5 VERY HEAVY PASS

FLAME PROPAGATION TEST 10.0, 10.1 APPLICATION TIME ≥30s PASS

AXIAL LOAD RATING 6.4.3, 9.4 NEWTONS (N) 125

HORIZONTAL - 650N
LATERAL LOAD RATING 6.4.2, 9.3 NEWTONS (N)
VERTICAL -1000N

195kA
RESISTANCE TO (REPORT No. PDL-09.098.2)
CLEATS AT 300MM INTERVALS
ELECTROMECHANICAL FORCE 6.4, 6.4.4, 9.5 (WITHSTANDING ONE SHORT
(SHORT CIRCUIT TESTING)
CIRCUIT) CABLE OD= Ø38mm
(EMPEROR TREFOIL)
(IEC 61914:2009)

RESISTANCE TO 149kA
CLEATS AT 600MM INTERVALS (REPORT No. PDL-17.137.4)
ELECTROMECHANICAL FORCE 6.4, 6.4.5, 9.5 (WITHSTANDING MORE THAN ONE
(SHORT CIRCUIT TESTING)
SHORT CIRCUIT)
(EMPEROR TREFOIL) CABLE OD= Ø36mm

LATERAL LOAD LATERAL LOAD

‘VERTICAL’ DIRECTION ‘HORIZONTAL DIRECTION’

LONDON UNDERGROUND
Emperor Cable Cleats are compliant
with the requiremnts of LUL-1085.
Conduit & cable hardware 4CG8
Product register number 362.
with AH-2 & wet locations. Listed sizes:
ES32-39 to ES94-118.

This information is subject to change without notice. The information provided has been generated in laboratory conditions, as such results in use may vary.

17
 FLEXI-STRAP ™

Intermediate Short-circuit Strap

Patent No. UK Patent GB 252 6331

Î 316L STAINLESS STEEL FRAME AND FIXINGS

Î OPTIONAL SOFT LSF POLYMERIC LINER PROTECTS CABLE
SHEATH
Î HEAVY DUTY AND STANDARD DUTY OPTIONS AVAILABLE
TO SUIT DIFFERENT SHORT CIRCUIT CONDITIONS
Î SHORT CIRCUIT AND MECHANICALLY TESTED TO IEC 61914
Î STRAPS CAN BE USED BETWEEN CLEATS TO REDUCE
THE TOTAL AMOUNT OF FIXED CLEATS WHILST ENSURING
ADEQUATE SHORT CIRCUIT PROTECTION

Flexi-Strap is available with or without a polymeric liner. If a liner

is not required remove ‘L’ from the part number (e.g. FS30-41SD).

STANDARD DUTY HEAVY DUTY

SUITABLE FOR USE WITH VULCAN+ CLEATS SUITABLE FOR USE WITH EMPEROR CLEATS
CABLE RANGE CABLE RANGE
WEIGHT WEIGHT
PART NO. MIN Ø MAX Ø PART NO. MIN Ø MAX Ø
(g) (g)
(mm) (mm) (mm) (mm)
FS24-34SDL 24 34 131 FS24-34HDL 24 34 165
FS30-41SDL 30 41 144 FS30-41HDL 30 41 185
FS37-47SDL 37 47 155 FS37-47HDL 37 47 202
FS43-54SDL 43 54 168 FS43-54HDL 43 54 221
FS50-60SDL 50 60 180 FS50-60HDL 50 60 238
FS56-67SDL 56 67 193 FS56-67HDL 56 67 258
FS63-73SDL 63 73 204 FS63-73HDL 63 73 275
FS69-80SDL 69 80 217 FS69-80HDL 69 80 294
FS72-85SDL 72 85 226 FS72-85HDL 72 85 308
FS82-95SDL 82 95 245 FS82-95HDL 82 95 336
FS92-105SDL 92 105 264 FS92-105HDL 92 105 364
FS102-115SDL 102 115 282 FS102-115HDL 102 115 392
FS112-125SDL 112 125 301 FS112-125HDL 112 125 420
FS122-135SDL 122 135 319 FS122-135HDL 122 135 448
FS132-145SDL 132 145 338 FS132-145HDL 132 145 476

18
 TESTING SUMMARY

Flexi-Straps have been tested in line with the International Standard ‘Cable Cleats for Electrical Installations’ IEC
61914:2015. Typical results are detailed below, please note that these testing values are maximums and safety
factors appropriate to your application should be used:

CLASSIFICATION
UNITS / TEST DATA TEST DATA
PROPERTY CLAUSE
CLASSIFICATION (STANDARD DUTY) (HEAVY DUTY)
IEC 61914

CLEAT TYPE 6.1.3 COMPOSITE N/A N/A

TEMP. FOR
PERMAMENT 6.2 °C -40 to +60 -40 to +60
APPLICATION
316L STAINLESS 316L STAINLESS
CORROSION
6.5.2.2 HIGH STEEL HAS≥16% STEEL HAS≥16%
RESISTANCE
CHROMIUM CHROMIUM

IMPACT RATING 6.3.5 VERY HEAVY PASS PASS

FLAME PROPAGATION
10.0, 10.1 APPLICATION TIME ≥30s PASS PASS
TEST
RESISTANCE TO CLEATS AT 300MM 134kA (REPORT No.
ELECTROMECHANICAL INTERVALS PDL-18.122.3)
6.4, 6.4.4, 9.5 -
FORCE (WITHSTANDING ONE SHORT
(SHORT CIRCUIT TESTING) CIRCUIT) CABLE OD= Ø36mm
156kA
114kA
RESISTANCE TO CLEATS AT 600MM (REPORT No.
(REPORT No.
ELECTROMECHANICAL INTERVALS ZKU-15-204)
6.4, 6.4.5, 9.5 PDL-18.122.4)
FORCE (WITHSTANDING MORE THAN
(SHORT CIRCUIT TESTING) ONE SHORT CIRCUIT) CABLE OD= Ø38mm
CABLE OD= Ø36mm
(IEC 61914:2009)
HORIZONTAL - 2250N
LATERAL LOAD RATING 6.4.2, 9.3 NEWTONS (N)
VERTICAL -2250N
134kA
RESISTANCE TO CLEATS AT 300MM
(REPORT No.
ELECTROMECHANICAL INTERVALS
6.4, 6.4.5, 9.5 PDL-18.071.6)
FORCE (WITHSTANDING MORE THAN
(SHORT CIRCUIT TESTING) ONE SHORT CIRCUIT)
CABLE OD= Ø36mm

94kA
RESISTANCE TO CLEATS AT 600MM
(REPORT No.
ELECTROMECHANICAL INTERVALS
6.4, 6.4.5, 9.5 PDL-18.071.5)
FORCE (WITHSTANDING MORE THAN
(SHORT CIRCUIT TESTING) ONE SHORT CIRCUIT)
CABLE OD= Ø36mm

INSTALLATION INFORMATION:
Flexi-Strap is installed by wrapping multiple layers of stainless steel strip around the cable. It is tightened and locked in place
using a patented buckle and spindle design. Standard duty straps are wrapped twice around the cables and heavy duty straps
are wrapped three times. For more information please refer to the product installation instructions or alternatively the videos
section of our website.
A special drive socket to turn the spindle is supplied with every 50 straps ordered, the socket can attach to a standard 1/4”
or 6mm ratchet handle. Drive sockets can be ordered seperatley using the part number FS-T001-4. Although the FS-T001-4
can speed up installation, standard tools also can be used.

This information is subject to change without notice. The information provided has been generated in laboratory conditions, as such results in use may vary.

19
 PROTECT ™

Retention Strap
UK Design Reg No. 355854

Î 316L STAINLESS STEEL FRAME AND FIXINGS

Î SOFT LSF POLYMERIC LINER PROTECTS
CABLE SHEATH
Î SUITABLE FOR USE IN BETWEEN VULCAN+
CLEATS, REDUCING THE AMOUNT OF FIXED
CLEATS WHILST ENSURING SHORT CIRCUIT
PROTECTION
Î SHORT CIRCUIT AND MECHANICALLY TESTED
TO IEC 61914
Î FOR STRAP SIZE DETAILS CONTACT ELLIS

TESTING SUMMARY

Protect has been tested in line with the International

Standard ‘Cable Cleats for Electrical Installations’ IEC
61914:2015. Typical results are detailed below, please
note that these testing values are maximums and safety
factors appropriate to your application should be used:

CLASSIFICATION UNITS /
PROPERTY TEST DATA
CLAUSE IEC 61914 CLASSIFICATION

CLEAT TYPE 6.1.3 COMPOSITE N/A

TEMP. FOR PERMAMENT

6.2 °C -40 to +60
APPLICATION
316L STAINLESS STEEL
CORROSION RESISTANCE 6.5.2.2 HIGH
HAS≥16% CHROMIUM

IMPACT RATING 6.3.5 - REFER TO ELLIS

FLAME PROPAGATION TEST 10.0, 10.1 APPLICATION TIME ≥30s PASS

RESISTANCE TO CLEATS AT 300MM 133kA

ELECTROMECHANICAL INTERVALS (REPORT No. PDL-18.071)
6.4, 6.4.4, 9.5
FORCE (WITHSTANDING ONE SHORT
(SHORT CIRCUIT TESTING) CIRCUIT) CABLE OD= Ø36mm

This information is subject to change without notice. The information provided has been generated in laboratory conditions, as such results in use may vary.

20
21
 TRIDENT ®

Polymeric Trefoil Cleat

Î MANUFACTURED AS STANDARD IN A HIGH STRENGTH

LSF GLASS FILLED NYLON
Î SINGLE OR TWO BOLT CLEAT FIXING OPTIONS
Î SHAPING OF THE CLEAT ENSURES CABLES ARE HELD IN A TREFOIL FORMATION ACROSS THE RANGE
Î SHORT CIRCUIT AND MECHANICALLY TESTED TO IEC 61914
Î FIXINGS ARE NOT SUPPLIED AS STANDARD BUT CAN BE PROVIDED ON REQUEST

CABLE RANGE DIMENSIONS (mm)

PART WEIGHT
NO. MIN Ø MAX Ø (g)
W H D P F
(mm) (mm)
TR24-29 24 29 122 91 77 92.5 M10 360
TR27-32 27 32 126 95 77 98.5 M10 370
TR30-36 30 36 134 104 77 104.5 M10 383
TR34-41 34 41 144 112 77 114.5 M10 485
TR39-47 39 47 156 124 77 126.5 M10 568
TR45-54 45 54 172 138 77 142.5 M10 666
TR52-62 52 62 190 153 77 160.5 M10 793
TR60-72 60 72 215 177 98 182 M12 1100
TR69-83 69 83 238 198 98 205 M12 1300

FIXING OPTION 1: 2 x M10/M12 FIXINGS FIXING OPTION 2: 1 X M12 FIXING

SHAPING OF THE TRIDENT CLAMPS ENSURES CABLES ARE MAINTAINED

IN A TRUE TREFOIL FORMATION ACROSS ITS RANGE TAKE, UNLIKE SIMILAR
POLYMERIC CLAMPS ON THE MARKET.

22
 TESTING SUMMARY

Trident Cleats have been tested in line with the International Standard ‘Cable Cleats for Electrical Installations’ IEC
61914:2015. Typical results are detailed below, please note that these testing values are maximums and safety factors
appropriate to your application should be used:

CLASSIFICATION UNITS /
PROPERTY TEST DATA
CLAUSE IEC 61914 CLASSIFICATION

CLEAT TYPE 6.1.2 NON-METALLIC -

TEMP. FOR PERMAMENT

6.2 °C -40 to +60
APPLICATION

UV RESISTANCE 6.5.1.2 XENON ARC METHOD A PASS

CORROSION RESISTANCE 6.5.2 N/A N/A

IMPACT RATING 6.3.5 VERY HEAVY PASS

FLAME PROPAGATION TEST 10.0, 10.1 APPLICATION TIME ≥30s PASS

AXIAL LOAD RATING 6.4.3, 9.4 NEWTONS (N) 1500

HORIZONTAL - 2250N
LATERAL LOAD RATING 6.4.2, 9.3 NEWTONS (N)
VERTICAL -2250N

134kA
RESISTANCE TO CLEATS AT 300MM INTERVALS
(REPORT No. PDL-18.071.6)
ELECTROMECHANICAL FORCE 6.4, 6.4.5, 9.5 (WITHSTANDING MORE THAN ONE
(SHORT CIRCUIT TESTING) SHORT CIRCUIT)
CABLE OD= Ø36mm

94kA
RESISTANCE TO CLEATS AT 600MM INTERVALS
(REPORT No. PDL-18.071.5)
ELECTROMECHANICAL FORCE 6.4, 6.4.5, 9.5 (WITHSTANDING MORE THAN ONE
(SHORT CIRCUIT TESTING) SHORT CIRCUIT)
CABLE OD= Ø36mm

LATERAL LOAD ‘VERTICAL’ DIRECTION LATERAL LOAD ‘HORIZONTAL DIRECTION’

This information is subject to change without notice. The information provided has been generated in laboratory conditions, as such results in use may vary.

23
 COLOSSUS ™

Community Design
Reg. No. 001927583

Î 316L STAINLESS STEEL FRAME AND FIXINGS

Î LSF POLYMERIC BASE AND TOP MOULDING
PROTECTS THE CABLE SHEATH
Î OPTIONAL SADDLED BASE AVAILABLE FOR
LARGE CLEAT SPACING APPLICATIONS
Î COLOSSUS RANGE CAN ACCOMMODATE
TREFOIL CABLES FROM Ø24MM TO Ø170MM
ACROSS 14 SIZES
Î SHORT CIRCUIT AND MECHANICALLY TESTED TO IEC 61914

CABLE RANGE DIMENSIONS (mm)

PART NO. MIN Ø MAX Ø FIXING HOLES (D1 & WEIGHT (g)
W H D P
(mm) (mm) D2)
COL24-29 24 29 128 87 60 25 2 x M10 + M12 604
COL27-32 27 32 133 92 60 25 2 x M10 + M12 623
COL30-36 30 36 137 101 60 25 2 x M10 + M12 639
COL34-41 34 41 146 110 60 25 2 x M10 + M12 690
COL39-47 39 47 157 122 60 25 2 x M10 + M12 734
COL45-54 45 54 171 141 70 50 2 x M10 913
COL52-62 52 62 185 156 70 50 2 x M10 974
COL60-72 60 72 204 176 70 50 2 x M10 1063
COL69-83 69 83 225 202 100 75 2 x M12 1590
COL79-95 79 95 247 225 100 75 2 x M12 1700
COL91-109 91 109 273 253 100 120 2 x M12 1900
COL105-126 105 126 306 286 150 120 2 x M12 3030
COL122-146 122 146 345 324 150 150 2 x M12 3270
COL142-170 142 170 390 371 150 150 2 x M12 3680

A SADDLED BASE IS AVAILABLE ON REQUEST.

24
 TESTING SUMMARY

Colossus Cleats have been tested in line with the International Standard ‘Cable Cleats for Electrical Installations’
IEC 61914:2015. Typical results are detailed below, please note that these testing values are maximums and safety
factors appropriate to your application should be used:

CLASSIFICATION UNITS /
PROPERTY TEST DATA
CLAUSE IEC 61914 CLASSIFICATION

CLEAT TYPE 6.1.3 COMPOSITE -

TEMP. FOR PERMAMENT

6.2 °C -40 to +60
APPLICATION
316L STAINLESS STEEL
CORROSION RESISTANCE 6.5.2.2 HIGH
HAS≥16% CHROMIUM

IMPACT RATING 6.3.5 VERY HEAVY PASS

FLAME PROPAGATION TEST 10.0, 10.1 APPLICATION TIME ≥30s PASS

AXIAL LOAD RATING 6.4.3, 9.4 NEWTONS (N) REFER TO ELLIS

LATERAL LOAD RATING 6.4.2, 9.3 NEWTONS (N) REFER TO ELLIS

170kA
RESISTANCE TO CLEATS AT 300MM INTERVALS
(REPORT No. PDL-18.122)
ELECTROMECHANICAL FORCE 6.4, 6.4.4, 9.5 (WITHSTANDING ONE SHORT
(SHORT CIRCUIT TESTING) CIRCUIT)
CABLE OD= Ø36mm
150kA
RESISTANCE TO CLEATS AT 600MM INTERVALS
(REPORT No. PDL-16.164.2)
ELECTROMECHANICAL FORCE 6.4, 6.4.5, 9.5 (WITHSTANDING MORE THAN ONE
(SHORT CIRCUIT TESTING) SHORT CIRCUIT)
CABLE OD= Ø36mm
104kA
RESISTANCE TO CLEATS AT 7.8M INTERVALS (REPORT No. ZKU-12-179)
ELECTROMECHANICAL FORCE 6.4, 6.4.5, 9.5 (WITHSTANDING MORE THAN ONE CABLE OD= Ø70mm
(SHORT CIRCUIT TESTING) SHORT CIRCUIT) (WITH PROTECT STRAPS EVERY
1.3m - BASED ON IEC61914:2009)

This information is subject to change without notice. The information provided has been generated in laboratory conditions, as such results in use may vary.

25
 CENTAUR ®

Cable Saddle, UK Patent App. No. 0805128.6

European Patent No. 1973211, US Patent No. 8398033
Community Design Registration No. 000749999

Î CURVED SADDLE CLEAT TO SUIT

SAGGED CABLE INSTALLATIONS
Î PIVOT POINTS ALLOW THE SADDLE
TO PARTIALLY ROTATE UP AND DOWN
AND LEFT TO RIGHT ACROSS ITS LENGTH
Î HINGED CABLE STRAP EASES INSTALLATION
Î CABLE ROLLERS CAN BE POSITIONED AT
THE ENDS OF THE SADDLE FOR CABLE
PULLING AS AN OPTIONAL EXTRA
Î SHORT CIRCUIT AND MECHANICALLY TESTED TO IEC 61914

CABLE RANGE DIMENSIONS (mm)

PART NO.. MIN Ø MAX Ø BASE FIXING
W H SADDLE LENGTH
(mm) (mm) TYPE
CS100-112 100 112 244 205 400, 600 or 800 1 x M16
CS108-122 108 122 244 212 400, 600 or 800 1 x M16
CS120-132 120 132 244 221 400, 600 or 800 1 x M16
CS128-142 128 142 244 233 400, 600 or 800 1 x M16
CS140-152 140 152 272 240 400, 600 or 800 1 x M16
CS150-162 150 162 272 253 400, 600 or 800 1 x M16

26
 TESTING SUMMARY

Centaur cable saddles have been tested in line with the International Standard ‘Cable Cleats for Electrical
Installations’ As IEC 61914 is part of the low voltage directive it is not possible to follow the standard exactly and
thus deviations have been made in areas. Typical results are detailed below, please note that these testing values
are maximums and safety factors appropriate to your application should be used:

CLASSIFICATION UNITS /
PROPERTY TEST DATA
CLAUSE IEC 61914 CLASSIFICATION

CLEAT TYPE 6.1.3 COMPOSITE -

TEMP. FOR PERMAMENT
6.2 °C -40 to +60
APPLICATION
METALLIC FRAME
UV RESISTANCE 6.5.1.2 UV RESISTANT SHIELDS ALL POLYMER
COMPONENTS.

CORROSION RESISTANCE 6.5.2.2 REFER TO ELLIS -

IMPACT RATING 6.3.5 VERY HEAVY PASS

FLAME PROPAGATION TEST 10.0, 10.1 APPLICATION TIME ≥30s PASS

AXIAL LOAD RATING 6.4.3, 9.4 NEWTONS (N) REFER TO ELLIS

LATERAL LOAD RATING 6.4.2, 9.3 NEWTONS (N) REFER TO ELLIS

163kA
RESISTANCE TO CENTAUR CLEATS AT 8.4M (REPORT No.
ELECTROMECHANICAL FORCE 6.4, 6.4.4, 9.5 KEMA-313-08)
(SHORT CIRCUIT TESTING)
WITH STRAPS AT MIDPOINTS
PHASE SPACING = 800mm

PROJECT SPECIFIC DESIGNS:

Centaur can be adpated to suit specific project requirements, as such Ellis can alter the design to suit certain
load or functionality requirements. Please contact Ellis for further details.

This information is subject to change

without notice. The information provided
has been generated in laboratory condi-
tions, as such results in use may vary.

27
 CENTAUR ®
INTERMEDIATE STRAP
Aluminium cable spacer

Î DESIGNED TO RESTRAIN CABLES DURING A SHORT CIRCUIT FAULT AND MAINTAIN PHASE SPACING
UNDER NORMAL OPERATING CONDITIONS
Î MANUFACTURED IN 6000 SERIES ALUMINIUM
Î TYPICAL SIZES RANGE FROM Ø100 - Ø162MM HOWEVER SPECIALS CAN BE PROVIDED ON
REQUEST
Î EACH CLAMP CAN PIVOT ABOUT THE JOINING BAR TO ACCOMMODATE FOR DIFFERENTIAL CABLE
MOVEMENT. FIXED VERSIONS CAN BE SUPPLIED ON REQUEST.
Î SHORT CIRCUIT TESTED BASED ON IEC 61914

TYPICAL INSTALLATION, PHOTO TAKEN BALFOUR BEATTY - POWER

AT A SHORT CIRCUIT TESTING EVENT AT TRANSMISSION AND DISTRIBUTION ON
KEMA LAB, ARNHEM NL. THE LONDON POWER TUNNELS

SPECIAL VERSIONS CAN BE SUPPLIED ON REQUEST

SHORT CIRCUIT TESTING

CENTAUR INTERMEDIATE STRAP HAS BEEN SHORT CIRCUIT TESTED TO THE FOLLOWING
PARAMETERS, CONSULT TEST REPORT NUMBER KEMA 313-08 FOR MORE DETAIL:
• CABLE = Ø140mm
• CENTAUR SADDLES EVERY 8.4m WITH INTERMEDIATE STRAPS AT MIDPOINTS
• PEAK CURRENT = 163KA

28
 TESTING SUMMARY

Centaur cable saddles have been tested in line with the International Standard ‘Cable Cleats for Electrical
Installations’ As IEC 61914 is part of the low voltage directive it is not possible to follow the standard exactly and
thus deviations have been made in areas. Typical results are detailed below, please note that these testing values
are maximums and safety factors appropriate to your application should be used:

CLASSIFICATION UNITS /
PROPERTY TEST DATA
CLAUSE IEC 61914 CLASSIFICATION

CLEAT TYPE 6.1.3 COMPOSITE -

TEMP. FOR PERMAMENT 6.2 °C -40 to +60

APPLICATION
METALLIC FRAME
UV RESISTANCE 6.5.1.2 UV RESISTANT SHIELDS ALL POLYMER
COMPONENTS.

CORROSION RESISTANCE 6.5.2.2 REFER TO ELLIS -

IMPACT RATING 6.3.5 VERY HEAVY PASS

FLAME PROPAGATION TEST 10.0, 10.1 APPLICATION TIME ≥30s PASS

AXIAL LOAD RATING 6.4.3, 9.4 NEWTONS (N) REFER TO ELLIS

LATERAL LOAD RATING 6.4.2, 9.3 NEWTONS (N) REFER TO ELLIS

117kA (REPORT No. KEMA-

RESISTANCE TO CENTAUR CLEATS AT 8.4M 313-08)
ELECTROMECHANICAL FORCE 6.4, 6.4.4, 9.5 WITH STRAPS AT MIDPOINTS
(SHORT CIRCUIT TESTING) CABLE = Ø103mm

This information is subject to change without notice. The information provided has been generated in laboratory conditions, as such results in use may vary.

29
 CABLE GUIDE CLAMP ™

UK (2514384), EUROPEAN (2806198)

and US (9,404,605) Patent

Î FULLY GIMBALLED CLAMP IS DESIGNED TO

ROTATE UNDER CABLE PULLING FORCES
Î CLAMPING PAD IS REMOVED FOR CABLE PULLING
AND RE-INSTALLED TO CLAMP THE CABLE ONCE
IT IS IN POSITION
Î CONSTRUCTED FROM HIGH STRENGTH V0 GLASS FILLED
NYLON AND GALVANISED STEEL COMPONENTS
Î SHORT CIRCUIT AND MECHANICALLY TESTED TO IEC 61914
Î INSTALLATION ANIMATION AVAILABLE ON THE VIDEOS
SECTION OF OUR WEBSITE

CABLE RANGE DIMENSIONS (mm)

WEIGHT
PART NO. MIN MAX Ø
W H D (kg)
Ø Ø FIXING HOLES
CGC100-112-G 100 112 185 260 200 1 x M16 5.2
CGC110-122-G 110 122 185 255 200 1 x M16 5.2
CGC120-135-G 120 135 203 281 200 1 x M16 5.5
CGC130-145-G 130 145 203 283 200 1 x M16 5.5
CGC140-160-G 140 160 262 324 250 1 x M16 6.25
CGC150-170-G 150 170 262 324 250 1 x M16 6.25

30
 TESTING SUMMARY

Cable Guide Clamp has been tested in line with the International Standard ‘Cable Cleats for Electrical Installations’
IEC 61914:2015. As IEC 61914 is part of the low voltage directive it is not possible to follow the standard exactly and
thus deviations have been made in areas. Typical results are detailed below, please note that these testing values
are maximums and safety factors appropriate to your application should be used:

CLASSIFICATION UNITS /
PROPERTY TEST DATA
CLAUSE IEC 61914 CLASSIFICATION

CLEAT TYPE 6.1.3 COMPOSITE -

TEMP. FOR PERMAMENT
6.2 °C -40 to +60
APPLICATION
192H SALT SPRAY TEST -
CORROSION RESISTANCE 6.5.2.2 HIGH
ISO 9227

IMPACT RATING 6.3.5 VERY HEAVY PASS

FLAME PROPAGATION TEST 10.0, 10.1 APPLICATION TIME ≥30s PASS

AXIAL LOAD RATING 6.4.3, 9.4 NEWTONS (N) REFER TO ELLIS

LATERAL LOAD RATING 6.4.2, 9.3 NEWTONS (N) REFER TO ELLIS

114kA (REPORT No. PDL-

15.025.1)
RESISTANCE TO CLEATS AT 1M INTERVALS
ELECTROMECHANICAL FORCE 6.4, 6.4.5, 9.5 (WITHSTANDING MORE THAN ONE CABLE OD= Ø117mm
(SHORT CIRCUIT TESTING) SHORT CIRCUIT)
PHASE SPACING = 200mm
(BASED ON IEC61914:2009)

A computer simulation of the Cable Guide

Clamp installed on a wind farm substation
in the North Sea. Actual image unavailable
due to reasons of confidentiality.

This information is subject to change without notice. The information provided has been generated in laboratory conditions, as such results in use may vary.

31
 ATLAS ™

Galvanized Steel Cable Cleats

Patent No. UK Patent GB 228 4444

Î GALVANISED STEEL FRAME WITH LSF POLYMERIC

PADS TO PROTECT THE CABLE SHEATH
Î CAN BE FIXED USING ONE BOLT,
TWO BOLTS OR A FRAMING CHANNEL FIXING
Î AVAILABLE FOR TREFOIL OR SINGLE
CABLE APPLICATIONS
Î SHORT CIRCUIT AND MECHANICALLY
TESTED TO IEC 61914

SELECTION TABLE FOR TREFOIL FORMATIONS

DIMENSIONS (mm)
CABLE TWO BOLT BASE FIXING SINGLE BOLT BASE FIXING FRAMING CHANNEL BASE FIXING WEIGHT
PART NO.
RANGE (g)
FIXING HOLES FIXING HOLES FIXING HOLES
W H D P W H D W H D
(D1) (D1) (D1)
AR2-A31-XX 24-26 170 121 54 150 2 x M10 144 130 54 1 x M10 144 125 54 1 x M10 930
AR2-A32-XX 26-30 170 122 54 150 2 x M10 144 130 54 1 x M10 144 125 54 1 x M10 930
AR2-A33-XX 30-35 170 133 54 150 2 x M10 157 141 54 1 x M10 157 136 54 1 x M10 970
AR2-A34-XX 35-40 170 134 54 150 2 x M10 158 142 54 1 x M10 158 137 54 1 x M10 930
AR3-A35-XX 40-45 198 158 54 175 2 x M10 185 165 54 1 x M10 185 160 54 1 x M10 1200
AR3-A36-XX 45-50 198 160 54 175 2 x M10 187 167 54 1 x M10 187 162 54 1 x M10 1200
AR4-A37-XX 50-55 214 174 54 200 2 x M10 204 182 54 1 x M12 204 177 54 1 x M12 1300
AR4-A38-XX 55-60 214 179 54 200 2 x M10 210 187 54 1 x M12 210 182 54 1 x M12 1300
AR4-A39-XX 60-66 214 185 54 200 2 x M10 217 193 54 1 x M12 217 188 54 1 x M12 1300
AR5-A61-XX 66-71 250 225 54 225 2 x M10 254 225 54 1 x M12 254 220 54 1 x M12 1800
AR5-A62-XX 71-76 250 226 54 225 2 x M10 255 226 54 1 x M12 255 221 54 1 x M12 1800
AR5-A63-XX 76-82 250 230 54 225 2 x M10 260 230 54 1 x M12 260 225 54 1 x M12 1800
AR8-A64-XX 82-92 285 250 54 225 2 x M10 N/A N/A 2100
AR8-A65-XX 92-102 285 250 54 225 2 x M10 N/A N/A 1900

TWO BOLT BASE FIXING SINGLE BOLT BASE FIXING FRAMING CHANNEL BASE FIXING

32
SELECTION TABLE FOR SINGLE FORMATIONS
DIMENSIONS (mm)
CABLE TWO BOLT BASE FIXING SINGLE BOLT BASE FIXING FRAMING CHANNEL BASE FIXING WEIGHT
PART NO.
RANGE FIXING FIXING FIXING (g)
W H D P W H D W H D
HOLES (D1) HOLES (D1) HOLES (D1)
AR2-A11-XX 38-41 170 128 54 150 2 x M10 144 136 54 1 x M10 144 131 54 1 x M10 950
AR2-A12-XX 41-47 170 129 54 150 2 x M10 144 136 54 1 x M10 144 131 54 1 x M10 930
AR2-A13-XX 47-55 170 140 54 150 2 x M10 157 147 54 1 x M10 157 142 54 1 x M10 940
AR2-A14-XX 55-63 170 141 54 150 2 x M10 158 148 54 1 x M10 158 143 54 1 x M10 930
AR3-A15-XX 63-70 198 164 54 175 2 x M10 185 172 54 1 x M10 185 167 54 1 x M10 1200
AR3-A16-XX 70-79 198 166 54 175 2 x M10 187 173 54 1 x M10 187 168 54 1 x M10 1200
AR4-A17-XX 79-87 214 180 54 200 2 x M10 204 188 54 1 x M12 204 183 54 1 x M12 1300
AR4-A18-XX 87-95 214 186 54 200 2 x M10 210 193 54 1 x M12 210 188 54 1 x M12 1300
AR4-A19-XX 95-104 214 192 54 200 2 x M10 217 199 54 1 x M12 217 197 54 1 x M12 1300
AR5-A51-XX 104-112 250 231 54 225 2 x M10 254 231 54 1 x M12 254 226 54 1 x M12 1700
AR5-A52-XX 112-120 250 232 54 225 2 x M10 255 232 54 1 x M12 255 227 54 1 x M12 1700
AR5-A53-XX 120-130 250 237 54 225 2 x M10 260 237 54 1 x M12 260 232 54 1 x M12 1700

For full part number please replace ‘XX’ with the following.:
TB = TWO BOLT BASE FIXING
SB = SINGLE BOLT BASE FIXING
FC = FRAMING CHANNEL BASE FIXING

TESTING SUMMARY

Atlas Cleats have been tested in line with the International Standard ‘Cable Cleats for Electrical Installations’ IEC
61914:2015. Typical results are detailed below, please note that these testing values are maximums and safety
factors appropriate to your application should be used:

CLASSIFICATION UNITS /
PROPERTY TEST DATA
CLAUSE IEC 61914 CLASSIFICATION

CLEAT TYPE 6.1.3 COMPOSITE -

TEMP. FOR PERMAMENT
6.2 °C -40 to +60
APPLICATION
IMPACT RATING 6.3.5 VERY HEAVY PASS

FLAME PROPAGATION TEST 10.0, 10.1 APPLICATION TIME ≥30s PASS

AXIAL LOAD RATING 6.4.3, 9.4 NEWTONS (N) REFER TO ELLIS

LATERAL LOAD RATING 6.4.2, 9.3 NEWTONS (N) REFER TO ELLIS

120kA
RESISTANCE TO CLEATS AT 300MM INTERVALS (REPORT No.
ELECTROMECHANICAL FORCE 6.4, 6.4.4, 9.5 (WITHSTANDING ONE SHORT PDL-18.122.7)
(SHORT CIRCUIT TESTING) CIRCUIT)
CABLE OD= Ø36mm

This information is subject to change without notice. The information provided has been generated in laboratory conditions, as such results in use may vary.

33
 VARI-CLEAT ™

Stainless Steel and Aluminium Cable Cleats

Patent No. UK Patent GB 226 1014

Î 316L STAINLESS STEEL STRAP AND FIXINGS

WITH A CAST ALUMINIUM BASE
Î CAPTIVE CLOSURE FIXINGS FOR FAST INSTALL
Î MULTI-CABLE BUNDLE OPTIONS AVAILABLE
ON REQUEST
Î SHORT CIRCUIT AND MECHANICALLY
TESTED TO IEC 61914

TESTING SUMMARY

Vari-Cleat has been tested in line with the International Standard ‘Cable Cleats for Electrical Installations’ IEC
61914:2015. Typical results are detailed below, please note that these testing values are maximums and safety
factors appropriate to your application should be used:

CLASSIFICATION UNITS / TEST DATA TEST DATA

PROPERTY
CLAUSE IEC 61914 CLASSIFICATION LINERED NO LINER
CLEAT TYPE 6.1.3 COMPOSITE - -
TEMP. FOR PERMAMENT
6.2 °C -40 to +60 -40 to +90
APPLICATION
IMPACT RATING 6.3.4 VERY HEAVY PASS PASS
FLAME PROPAGATION TEST 10.0, 10.1 APPLICATION TIME ≥30s PASS N/A
AXIAL LOAD RATING 6.4.3, 9.4 NEWTONS (N) REFER TO ELLIS
LATERAL LOAD RATING 6.4.2, 9.3 NEWTONS (N) REFER TO ELLIS
CLEATS AT 300MM
RESISTANCE TO 110kA (REPORT No. PDL-18.071.3)
6.4, 6.4.5, 9.5 INTERVALS
ELECTROMECHANICAL FORCE (PART NO. - VC-BN4-BN0)
(WITHSTANDING MORE
(SHORT CIRCUIT TESTING) CABLE OD= Ø36mm
THAN ONE SHORT CIRCUIT)

FOR BASE SIZES DN, EN, FN,

FOR BASE SIZES AN, BN & CN GN & HN

34
 CABLE RANGE WITHOUT CABLE RANGE SINGLE
DIMENSIONS (mm) FIXING HOLES
PART NO. LINER WITH LINER WEIGHT (g)
(D1 & D2)
TREFOIL SINGLE TREFOIL SINGLE W H D P
VC-AN1-XXX 21-24 36-43 19-22 31-38 82 80 74 25 2 x M8 373
VC-AN2-XXX 22-26 41-48 21-24 36-43 82 84 74 25 2 x M8 373
VC-AN3-XXX 24-28 44-51 23-26 39-46 83 88 74 25 2 x M8 373
VC-AN4-XXX 26-30 49-54 25-29 44-51 86 92 74 25 2 x M8 373
VC-BN1-XXX 29-33 51-59 27-31 46-54 97 94 74 25 2 x M8 430
VC-BN2-XXX 30-35 55-63 29-33 50-58 97 97 74 25 2 x M8 430
VC-BN3-XXX 32-37 60-68 30-36 55-63 100 101 74 25 2 x M8 430
VC-BN4-XXX 34-38 64-70 33-38 59-68 104 105 74 25 2 x M8 430
VC-CN1-XXX 37-42 68-76 35-40 63-71 117 105 76 25 2 x M8 490
VC-CN2-XXX 39-44 72-81 37-42 67-76 117 109 76 25 2 x M8 490
VC-CN3-XXX 42-47 76-85 39-45 71-80 118 115 76 25 2 x M8 490
VC-CN4-XXX 44-48 81-87 42-47 76-86 124 121 76 50 2 x M8 490
VC-DN1-XXX 47-53 86-96 47-51 81-91 138 126 78 50 2 x M8 + 1 x M10 610
VC-DN2-XXX 50-56 91-100 49-54 86-95 141 132 78 50 2 x M8 + 1 x M10 610
VC-DN3-XXX 54-59 96-105 52-57 91-100 147 138 78 50 2 x M8 + 1 x M10 610
VC-DN4-XXX 56-60 101-106 55-60 96-106 153 144 78 75 2 x M8 + 1 x M10 610
VC-EN1-XXX 59-63.5 105-112 58-62 100-107 163 147 80 75 2 x M8 + 1 x M10 730
VC-EN2-XXX 62-67 111-118 61-66 106-113 167 154 80 75 2 x M8 + 1 x M10 730
VC-EN3-XXX 65-70 118-125 64-69 113-120 174 160 80 75 2 x M8 + 1 x M10 730
VC-EN4-XXX 68-74 125-132 67-73 120-127 181 167 80 75 2 x M8 + 1 x M10 730
VC-FN1-XXX 71-76 125-140 69-74 120-135 187 170 82 90 3 x M12 880
VC-FN2-XXX 74-80 132-145 72-78 128-140 194 177 82 90 3 x M12 880
VC-FN3-XXX 78-84 139-152 76-82 134-147 201 185 82 90 3 x M12 880
VC-FN4-XXX 82-88 148-160 80-86 143-155 210 193 82 90 3 x M12 880
VC-GN1-XXX 84-91 145-160 82-89 140-155 217 197 82 114 3 x M12 970
VC-GN2-XXX 88-95 155-170 86-93 150-165 225 205 82 114 3 x M12 970
VC-GN3-XXX 92-99 165-180 90-97 160-175 233 213 82 114 3 x M12 970
VC-GN4-XXX 96-103 175-190 94-101 170-185 240 221 82 114 3 x M12 970
VC-HN1-XXX 98-106 170-190 96-104 165-185 247 229 84 136 3 x M12 1170
VC-HN2-XXX 102-110 180-200 100-108 175-195 255 237 84 136 3 x M12 1170
VC-HN3-XXX 106-114 190-205 104-112 185-200 263 245 84 136 3 x M12 1170
VC-HN4-XXX 110-118 200-215 108-116 195-210 271 252 84 136 3 x M12 1170

SUFFIX 1 SUFFIX 2 SUFFIX 3 PART NO. EXAMPLE:

(CAST BASE FINISH) VC-CN2 WITH A LINER AND NATURAL BASE FINISH
A - No Liner N - Natural 0 - Standard Holes = VC-CN2-BN0
B - Linered P - Polyester Black
K - Kevlar

This information is subject to change without notice. The information provided has been generated in laboratory conditions, as such results in use may vary.

35
 NO BOLTS CLEAT ™

Patent Pending
(Application Number 1804174.9)

Î FULLY POLYMERIC CONSTRUCTION ELIMINATES

THE RISK OF SNAGGING CABLE ON FIXING BOLTS
Î TOOLLESS DESIGN ALLOWS FOR FAST
INSTALLATION
Î PRODUCT CAN BE STACKED THREE CLAMPS
HIGH USING TWIST FOOT FEATURE
Î SHORT CIRCUIT AND MECHANICALLY
TESTED TO IEC 61914

CABLE DIMENSIONS (mm) FIXING WEIGHT

PART NO.
RANGE W H D HOLES (g)
NBC18-22 18 - 22 109 91 90 1 x M8 830
NBC20-26 20 - 26 109 91 90 1 x M8 815
NBC24-30 24 - 30 109 91 90 1 x M8 808
NBC28-34 28 - 34 109 91 90 1 x M8 801
NBC32-39 32 - 39 109 91 90 1 x M8 792
NBC37-47 37 - 47 109 91 90 1 x M8 758
NBC45-55* 45 - 55 109 91 85 1 x M8 675

NOTE: THE CLEAT RANGE IS COVERED BY A SET OF INSERTS THAT SIT INSIDE THE MAIN BODY, FOR THE TWIST FOOT VERSION ADD A 'TF' SUFFIX E.G.
THEREFORE ALL OUTSIDE DIMENSIONS ARE THE SAME. *NBC45-55 DOES NOT USE INSERTS. NBC18-22TF

PADS NO. ELLIS PART NO.

0111/120321 NBC18-22TF (for 18-22mm cables)
0111/120322 NBC20-26TF (for 20-26mm cables)
0111/120323 NBC24-30TF (for 24-30mm cables)
0111/120324 NBC28-34TF (for 28-34mm cables)
0111/120325 NBC32-39TF (for 32-39mm cables)
0111/120133 NBC37-47TF (for 37-47mm cables)
0111/120134 NBC45-55TF (for 45-55mm cables)

PRODUCT CAN BE STACKED A MAXIMUM OF THREE HIGH BY USING THE

TWIST FOOT VARIANT. THIS VERSION LOCKS INTO THE RECESS PROVIDED
IN THE TOP OF THE CLAMPS.

DUE TO TOLERANCES OF STANDARD UNISTRUT STYLE PROFILE, ELLIS

RECOMMEND USING FIXINGS TO FASTEN THE CLAMP TO THE CHANNEL.

36
 TESTING SUMMARY

No Bolts Cleat has been tested in line with the International Standard of ‘Cable Cleats for Electrical
Installations’ IEC 61914: 2015. Typical results below:

CLASSIFICATION UNITS /
PROPERTY TEST DATA
CLAUSE IEC 61914 CLASSIFICATION

CLEAT TYPE 6.1.2 POLYMERIC -

TEMP. FOR PERMAMENT
6.2 °C -40 to +60
APPLICATION
IMPACT RATING 6.3.5 VERY HEAVY PASS
FLAME PROPAGATION TEST 10.0, 10.1 APPLICATION TIME ≥30s PASS
AXIAL LOAD RATING 6.4.3, 9.4 NEWTONS (N) REFER TO ELLIS

LATERAL LOAD RATING 6.4.2, 9.3 NEWTONS (N) REFER TO ELLIS

101kA (REPORT No. PDL-

RESISTANCE TO CLEATS AT 300MM INTERVALS 16.106)
ELECTROMECHANICAL FORCE 6.4, 6.4.5, 9.5 (WITHSTANDING MORE THAN ONE
(SHORT CIRCUIT TESTING) SHORT CIRCUIT) PHASE SPACING = 110mm
CABLE OD= Ø36mm

71kA
(REPORT No. PDL-16.106)
RESISTANCE TO CLEATS AT 300MM INTERVALS TESTED IN STACKED
ELECTROMECHANICAL FORCE 6.4, 6.4.5, 9.5 (WITHSTANDING MORE THAN ONE
SHORT CIRCUIT)
FORMATION
(SHORT CIRCUIT TESTING)
PHASE SPACING = 75mm
CABLE OD= Ø36mm

*TESTING CARRIED OUT ON NBC45-55 ONLY

LATERAL LOAD 'VERTICAL' DIRECTION LATERAL LOAD 'HORIZONTAL DIRECTION'

NO BOLTS CLEAT IS A NETWORK RAIL APPROVED PRODUCT. EXAMPLE PADS NUMBER (NBC45-55): 011/120134

This information is subject to change without notice. The information provided has been generated in laboratory conditions, as such results in use may vary.

37
 1A CABLE CLAMPS
Cast aluminium clamp

Î 1 HOLE CLAMP CAST IN LM6 ALUMINIUM

Î ACCOMODATES Ø10MM - Ø57MM CABLES
ACROSS 10 SIZES
Î SHORT CIRCUIT AND MECHANICALLY TESTED
TO IEC 61914
Î FIXINGS ARE NOT SUPPLIED AS STANDARD
BUT CAN BE MADE AVAILABLE ON REQUEST

CABLE RANGE (mm) DIMENSIONS (mm) FIXING WEIGHT

PART NO.
MIN MAX W H D E HOLES (g)

1A-10N 10 13 37.8 30.0 41.4 10.2 1 x M10 43

1A-11N 13 16 41.2 33.0 41.4 10.4 1 x M10 52
1A-12N 16 19 44.3 36.0 41.4 10.7 1 x M10 61
1A-13N 19 23 48.2 40.0 41.4 10.9 1 x M10 68
1A-14N 23 27 52.2 44.0 41.4 11.3 1 x M10 78
1A-15N 27 32 57.1 49.0 41.4 11.6 1 x M10 85
1A-16N 32 38 63.1 55.0 41.4 12.1 1 x M10 97
1A-17N 38 46 71.3 66.0 41.4 12.9 1 x M10 121
1A-18N 46 51 77.3 73.0 41.4 13.5 1 x M10 155
1A-19N 51 57 83.2 78.0 41.4 13.9 1 x M10 171

38
 TESTING SUMMARY

1A Clamps have been tested in line with the International Standard ‘Cable Cleats for Electrical Installations’ IEC
61914:2015. Typical results are detailed below, please note that these testing values are maximums and safety factors
appropriate to your application should be used:

CLASSIFICATION UNITS /
PROPERTY TEST DATA
CLAUSE IEC 61914 CLASSIFICATION

CLEAT TYPE 6.1.2 METALLIC -

TEMP. FOR PERMAMENT

6.2 °C -40 to +90
APPLICATION
ALUMINIUM IS NON-
CORROSION RESISTANCE 6.5.2 HIGH
FERROUS

IMPACT RATING 6.3.5 VERY HEAVY PASS

FLAME PROPAGATION TEST 10.0, 10.1 APPLICATION TIME ≥30s N/A

AXIAL LOAD RATING 6.4.3, 9.4 NEWTONS (N) REFER TO ELLIS

LATERAL LOAD RATING 6.4.2, 9.3 NEWTONS (N) REFER TO ELLIS

70.8kA
(REPORT No.
RESISTANCE TO CLEATS AT 600MM INTERVALS PDL-15.025.2)
ELECTROMECHANICAL FORCE 6.4, 6.4.5, 9.5 (WITHSTANDING MORE THAN ONE
(SHORT CIRCUIT TESTING) SHORT CIRCUIT) (IEC 61914:2009)
PHASE SPACING = 100mm
CABLE OD= Ø39mm

LATERAL LOAD ‘VERTICAL’ DIRECTION LATERAL LOAD ‘HORIZONTAL DIRECTION’

This information is subject to change without notice. The information provided has been generated in laboratory conditions, as such results in use may vary.

39
 2A CABLE CLAMPS
Cast aluminium clamp

Î 2 HOLE CLAMPS CAST IN LM6 ALUMINIUM

Î ROBUST DESIGN OFFERS GOOD RESISTANCE TO
CABLE FORCES
Î CLAMPING RANGE OF Ø32 - Ø168MM ACHIEVED
ACROSS 18 SIZES
Î SHORT CIRCUIT AND MECHANICALLY TESTED
TO IEC 61914
Î FIXINGS ARE NOT SUPPLIED AS STANDARD BUT CAN BE SUPPLIED ON REQUEST

CABLE RANGE
CABLE RANGE LINER DIMENSIONS (mm)
WITH LINER LATERAL LATERAL
PART THICK- WEIGHT AXIAL
LOAD - LOAD -
NO. MIN Ø MAX Ø NESS MIN Ø MIN Ø (g) LOAD
W H D P Ø HORIZONTAL VERTICAL
(mm) (mm) (mm) (mm) (mm)
2A-07N 38 46 3 32 40 94 48 49 68 2 x M10 174 800N 12.5kN 25kN
2A-08N 46 51 3 40 45 104 54 49 79 2 x M10 214 800N 12.5kN 25kN
2A-09N 51 57 3 45 51 105 61 49 79 2 x M10 224 800N 12.5kN 25kN
2A-10N 57 64 3 51 58 105 68 49 79 2 x M10 234 800N 12.5kN 25kN
2A-11N 64 70 3 58 64 133 74 64 106 2 x M10 360 800N 12.5kN 25kN
2A-1200N 70 76 3 64 70 133 80 64 106 2 x M10 376 800N 12.5kN 25kN
2A-1201N 76 83 3 70 77 133 87 64 106 2 x M10 388 800N 12.5kN 25kN
2A-1202N 83 90 3 77 84 133 94 64 106 2 x M10 392 800N 12.5kN 25kN
2A-131N 90 97 4 82 89 154 101 76 126 2 x M10 520 800N 12.5kN 25kN
2A-132N 97 105 4 89 97 154 109 76 126 2 x M10 524 800N 12.5kN 25kN
2A-141N 105 112 4 97 104 165 118 76 135 2 x M10 590 800N 12.5kN 25kN
2A-142N 112 120 4 104 112 173 124 76 143 2 X M10 642 800N 12.5kN 25kN
2A-151N 120 128 5 110 118 196 148 125 168 2 X M12 1700 5.5kN 20kN 50kN
2A-152N 128 135 5 118 125 203 158 125 176 2 X M12 1840 5.5kN 20kN 50kN
2A-161N 135 144 5 125 134 222 168 150 190 2 X M16 2633 6kN 35kN 60kN
2A-162N 144 152 5 134 142 232 179 150 200 2 X M16 2856 6kN 35kN 60kN
2A-171N 152 160 5 142 150 242 190 150 210 2 X M16 3089 6kN 35kN 60kN
2A-172N 160 168 5 150 158 252 201 150 220 2 X M16 3332 6kN 35kN 60kN

FOR THE LINERED VERSION ADD ‘L’ AS A

SUFFIX TO THE PART NO. E.G. ‘2A-07NL’.

40
 TESTING SUMMARY

2A Clamps have been tested in line with the International Standard ‘Cable Cleats for Electrical Installations’ IEC
61914:2015. Typical results are detailed below, please note that these testing values are maximums and safety
factors appropriate to your application should be used:

CLASSIFICATION UNITS /
PROPERTY TEST DATA
CLAUSE IEC 61914 CLASSIFICATION

CLEAT TYPE 6.1, 6.1.3 METALLIC -

TEMP. FOR PERMAMENT

6.2 °C -40 to +90
APPLICATION

UV RESISTANCE 6.5.1.2 N/A -

ALUMINIUM IS
CORROSION RESISTANCE 6.5.2.2 HIGH
NON-FERROUS

IMPACT RATING 6.35 VERY HEAVY PASS

FLAME PROPAGATION TEST 10.0, 10.1 APPLICATION TIME ≥30s N/A

REFER TO THE DATA TABLE
AXIAL LOAD RATING 6.4.3, 9.4 NEWTONS (N)
OPPOSITE
REFER TO THE DATA TABLE
LATERAL LOAD RATING 6.4.2, 9.3 NEWTONS (N)
OPPOSITE

183kA
RESISTANCE TO CLEATS AT 300MM INTERVALS (REPORT No. PDL-18.071.1)
ELECTROMECHANICAL FORCE 6.4, 6.4.4, 9.5 (WITHSTANDING ONE SHORT
(SHORT CIRCUIT TESTING) CIRCUIT) CABLE OD= Ø36mm
PHASE SPACING = 100MM

113kA
RESISTANCE TO CLEATS AT 1M INTERVALS (REPORT No. PDL-15.025.1)
ELECTROMECHANICAL FORCE 6.4, 6.4.5, 9.5 (WITHSTANDING MORE THAN ONE
(SHORT CIRCUIT TESTING) SHORT CIRCUIT) CABLE OD= Ø117mm
PHASE SPACING = 200MM

The test data provided above is for the standard version only, for test data with the liner option please contact Ellis.

LATERAL LOAD ‘VERTICAL’ DIRECTION LATERAL LOAD ‘HORIZONTAL DIRECTION’

This information is subject to change without notice. The information provided has been generated in laboratory conditions, as such results in use may vary.

41
 1F CABLE CLAMPS
UK Design Reg. No: 355854

Î 1 HOLE CLAMPS MANUFACTURED IN LSF

NYLON OR STANDARD POLYPROPYLENE
Î ACCOMODATES Ø10MM - Ø57MM CABLES
ACROSS 10 SIZES
Î SHORT CIRCUIT AND MECHANICALLY TESTED
TO IEC 61914
Î FIXINGS ARE NOT SUPPLIED AS STANDARD
BUT CAN BE MADE AVAILABLE ON REQUEST

PART MATERIAL CABLE RANGE DIMENSIONS (mm) FIXING PACK WEIGHT (g)
NO. SUFFIX DIA (mm) W H D E HOLES QTY B LSF LUL
1F-10 B/LSF/LUL 10-13 37.8 27.0 41.4 10.2 1 X M10 100 14.6 19.6 23.8

1F-11 B/LSF/LUL 13-16 41.2 30.0 41.4 10.4 1 X M10 100 17.0 23.0 27.7

1F-12 B/LSF/LUL 16-19 44.3 33.0 41.4 10.7 1 X M10 100 19.6 26.4 32.0

1F-13 B/LSF/LUL 19-23 48.2 36.0 41.4 10.9 1 X M10 100 22.4 30.2 36.5

1F-14 B/LSF/LUL 23-27 52.2 40.0 41.4 11.3 1 X M10 100 25.8 34.6 42.0

1F-15 B/LSF/LUL 27-32 57.1 44.0 41.4 11.6 1 X M10 100 29.2 39.0 47.6

1F-16 B/LSF/LUL 32-38 63.1 49.0 41.4 12.1 1 X M10 100 34.2 46.2 55.7

1F-17 B/LSF/LUL 38-46 71.3 58.0 41.4 12.9 1 X M10 50 47.8 64.0 77.9

1F-18 B/LSF/LUL 46-51 77.3 67.0 41.4 13.5 1 X M10 50 54.0 73.2 88.0

1F-19 B/LSF/LUL 51-57 83.2 72.0 41.4 13.9 1 X M10 50 59.0 80.4 96.2

42
 TESTING SUMMARY

1F Clamps have been tested in line with the International Standard ‘Cable Cleats for Electrical Installations’ IEC
61914:2015. Typical results are detailed below, please note that these testing values are maximums and safety factors
appropriate to your application should be used:

CLASSIFICATION UNITS / TEST DATA

PROPERTY
CLAUSE IEC 61914 CLASSIFICATION
LSF B
CLEAT TYPE 6.1.2 POLYMERIC - -

TEMP. FOR PERMAMENT

6.2 °C -40 to +60 -40 to +40
APPLICATION
XENON ARC
UV RESISTANCE 6.5.1.2 PASS PASS
METHOD A

IMPACT RATING 6.3.5 VERY HEAVY REFER TO ELLIS REFER TO ELLIS

FLAME PROPAGATION APPLICATION TIME

10.0, 10.1 PASS NOT COMPLIANT
TEST ≥30s
AXIAL LOAD RATING 6.4.3, 9.4 NEWTONS (N) REFER TO ELLIS REFER TO ELLIS

LATERAL LOAD RATING 6.4.2, 9.3 NEWTONS (N) REFER TO ELLIS REFER TO ELLIS

10.4kA
CLEATS AT 300MM (REPORT No. PDL-
RESISTANCE TO 17.137.2)
ELECTROMECHANICAL INTERVALS NOT SHORT
6.4, 6.4.5, 9.5 (WITHSTANDING MORE (IEC 61914:2015)
FORCE CIRCUIT TESTED
THAN ONE SHORT PHASE SPACING =
(SHORT CIRCUIT TESTING) CIRCUIT)
100mm
CABLE OD= Ø36mm

LATERAL LOAD ‘VERTICAL’ DIRECTION LATERAL LOAD ‘HORIZONTAL DIRECTION’

APPROVALS:
THE LUL VERSION OF THE 1F ONE HOLE CABLE CLAMPS
ARE COMPLIANT WITH THE REQUIREMENT OF LONDON
UNDERGROUND STANDARD 1-085. PRODUCT REGISTER NO. 363.

This information is subject to change without notice. The information provided has been generated in laboratory conditions, as such results in use may vary.

43
 2F+ CABLE CLAMPS
UK Design Reg. No: 355854

Î 2 HOLE CLAMPS MANUFACTURED IN LSF

NYLON OR STANDARD POLYPROPYLENE
Î ROBUST DESIGN OFFERS GOOD RESISTANCE
TO CABLE FORCES
Î CLAMPING RANGE OF Ø32 - Ø168MM
ACHIEVED ACROSS 18 SIZES
Î SHORT CIRCUIT AND MECHANICALLY TESTED TO IEC 61914
Î FIXINGS ARE NOT SUPPLIED AS STANDARD BUT CAN BE SUPPLIED ON REQUEST
Î OPTIONAL LSF POLYMERIC LINER AVAILABLE

PART MATERIAL CABLE RANGE LINER RANGE TAKE DIMENSIONS (mm) FIXING PACK WEIGHT (g)
NO. SUFFIX DIA (mm) THICKNESS WITH LINER W H D E HOLES QTY B LSF LUL
2F+07 B/LSF/LUL 38-46 3 32-40 92 60 54 68 2 X M10 25 73.0 91.0 119.0
2F+08 B/LSF/LUL 46-51 3 40-45 103 71 54 79 2 X M10 25 80.9 109.9 132.0
2F+09 B/LSF/LUL 51-57 3 45-51 103 76 54 79 2 X M10 25 95.0 119.0 155.0
2F+10 B/LSF/LUL 57-64 3 51-58 103 82 54 79 2 X M10 25 89.1 122.5 156.5
2F+11 B/LSF/LUL 64-70 3 58-64 130 89 54 106 2 X M10 10 116.0 157.3 189.0
2F+1200 B/LSF/LUL 70-76 4 62-68 128 95 75 104 2 X M10 10 160.1 190.0 285.0
2F+1201 B/LSF/LUL 76-83 4 68-75 135 100 75 111 2 X M10 10 174.0 206.5 309.8
2F+1202 B/LSF/LUL 83-90 4 75-82 143 108 75 119 2 X M10 10 188.3 228.6 342.9
2F+131 B/LSF/LUL 90-97 5 80-87 165 115 100 138 2 X M12 5 335.5 423.0 634.5
2F+132 B/LSF/LUL 97-105 5 87-95 171 122 100 144 2 X M12 5 355.1 440.6 660.9
2F+141 B/LSF/LUL 105-112 5 95-102 178 130 100 151 2 X M12 5 382.4 509.9 764.9
2F+142 B/LSF/LUL 112-120 5 102-110 187 138 125 160 2 X M12 5 495.6 622.0 933.0
2F+151 B/LSF/LUL 120-128 5 110-118 196 148 125 168 2 X M12 5 536.8 715.7 1073.5
2F+152 B/LSF/LUL 128-135 5 118-125 203 158 125 176 2 X M12 5 578.9 771.9 1157.9
2F+161 B/LSF/LUL 135-144 5 125-134 222 168 150 190 2 X M16 5 831.3 1108.4 1662.7
2F+162 B/LSF/LUL 144-152 5 134-142 232 179 150 200 2 X M16 5 902.3 1203.1 1804.6
2F+171 B/LSF/LUL 152-160 5 142-150 242 190 150 210 2 X M16 5 976.2 1301.6 1952.4
2F+172 B/LSF/LUL 160-168 5 150-158 252 201 150 220 2 X M16 5 1052.1 1402.9 2104.3

A CLAMP MANUFACTURED IN LONDON UNDERGROUND APPROVED MATERIAL CAN BE SUPPLIED ON REQUEST.

CONTACT ELLIS FOR FURTHER DETAILS.
44
 TESTING SUMMARY

2F+ Clamps have been tested in line with the International Standard ‘Cable Cleats for Electrical Installations’ IEC
61914:2015. Typical results are detailed below, please note that these testing values are maximums and safety
factors appropriate to your application should be used:

CLASSIFICATION UNITS /
PROPERTY TEST DATA
CLAUSE IEC 61914 CLASSIFICATION

CLEAT TYPE 6.1, 6.1.3 POLYMERIC -

TEMP. FOR PERMAMENT LSF: -40 to +60

6.2 °C
APPLICATION B:-40 to +40

UV RESISTANCE 6.5.1.2 XENON ARC METHOD A PASS

IMPACT RATING 6.35 VERY HEAVY PASS

LSF: PASS
FLAME PROPAGATION TEST 10.0, 10.1 APPLICATION TIME ≥30s
B: NOT COMPLIANT
REFER TO THE DATA TABLE
AXIAL LOAD RATING 6.4.3, 9.4 NEWTONS (N)
OPPOSITE
REFER TO THE DATA TABLE
LATERAL LOAD RATING 6.4.2, 9.3 NEWTONS (N)
OPPOSITE

80.2kA
2F+07LSF CLEATS AT 600MM (REPORT No. PDL-17.137.3)
RESISTANCE TO
6.4, 6.4.5, 9.5 INTERVALS
ELECTROMECHANICAL FORCE
(WITHSTANDING ONE SHORT
(SHORT CIRCUIT TESTING)
CIRCUIT)
CABLE OD= Ø36mm
PHASE SPACING = 100mm
113kA
2F+142LSF CLEATS AT 1M (REPORT No. PDL-17.137.3)
RESISTANCE TO (BASED ON IEC 61914: 2009)
6.4, 6.4.5, 9.5 INTERVALS
ELECTROMECHANICAL FORCE
(WITHSTANDING MORE THAN ONE
(SHORT CIRCUIT TESTING)
SHORT CIRCUIT) CABLE OD= Ø117mm
PHASE SPACING = 200mm

The test data provided above is for the standard version only, for test data with the liner option please contact Ellis.

LATERAL LOAD ‘VERTICAL’ DIRECTION LATERAL LOAD ‘HORIZONTAL DIRECTION’

LONDON UNDERGROUND
The LUL version of 2F+ Clamps are compliant with the requiremnts of LUL-1085. Product register number 364.

This information is subject to change without notice. The information provided has been generated in laboratory conditions, as such results in use may vary.

45
 PHOENIX ®

Fire Rated Cable Clamps

Community Design Reg No. 000355854-0002

Î METALLIC FRAME IS DESIGNED

FOR THE INSTALLATION OF FIRE
PROTECTION RATED CABLES.
Î TESTED FOR FIRE RESISTANCE IN
ACCORDANCE WITH BS 5839-1.
Î AVAILABLE IN 12 SIZES TO SUIT
Ø10MM TO Ø74MM CABLE
Î SHORT CIRCUIT AND MECHANICALLY TESTED TO IEC 61914
Î MARINE GRADE STAINLESS STEEL FRAME ENSURES
PERFORMANCE IN THE HARSHEST OF ENVIRONMENTS
Î FIXINGS NOT SUPPLIED AS STANDARD BUT ARE
AVAILABLE ON REQUEST

CABLE RANGE DIMENSIONS (mm)

PART NO. MIN Ø MAX Ø WEIGHT (g)
W H D P F
(mm) (mm)
1FP-10SS 10 13 40 21 40 13.7 1 x M10 91
1FP-11SS 13 16 44 24 40 13.7 1 x M10 106
1FP-12SS 16 19 47 27 40 13.7 1 x M10 113
1FP-13SS 19 23 51 31 40 13.7 1 x M10 125
1FP-14SS 23 27 55 35 40 13.7 1 x M10 139
1FP-15SS 27 32 60 40 40 13.7 1 x M10 153
1FP-16SS 32 38 66 46 40 13.7 1 x M10 174
1FP-17SS 38 46 74 54 40 13.7 1 x M10 201
1FP-18SS 46 51 80 59 40 13.7 1 x M10 225
1FP-19SS 51 57 85 64 40 13.7 1 x M10 242
1FP-20SS 57 65 93 73 40 13.7 1 x M10 265
1FP-21SS 65 74 98 82 40 13.7 1 x M10 293

46
 TESTING SUMMARY

Phoenix Cleats have been tested in line with the International Standard ‘Cable Cleats for Electrical Installations’
IEC 61914:2015. Typical results are detailed below, please note that these testing values are maximums and safety
factors appropriate to your application should be used:

CLASSIFICATION UNITS /
PROPERTY TEST DATA
CLAUSE IEC 61914 CLASSIFICATION

CLEAT TYPE 6.1.1 METALLIC -

TEMP. FOR PERMAMENT
6.2 °C -40 to +60
APPLICATION
UV RESISTANCE 6.5.1 N/A -
316L STAINLESS STEEL
CORROSION RESISTANCE 6.5.2.2 HIGH
HAS 16% CHROMIUM

IMPACT RATING 6.3.4 HEAVY PASS

FLAME PROPAGATION TEST 10.0, 10.1 NO CONTRIBUTION TO FIRE METALLIC

AXIAL LOAD RATING 6.4.3, 9.4 NEWTONS (N) 45

HORIZONTAL - 350N
LATERAL LOAD RATING 6.4.2, 9.3 NEWTONS (N)
VERTICAL -350N
31kA
RESISTANCE TO CLEATS AT 300MM (REPORT No.
ELECTROMECHANICAL INTERVALS PDL-17.137.1)
6.4, 6.4.5, 9.5
FORCE (WITHSTANDING MORE THAN ONE
(SHORT CIRCUIT TESTING) SHORT CIRCUIT) CABLE OD= Ø36mm
Phase Spacing = 100mm

LATERAL LOAD LATERAL LOAD Phoenix clips have been

‘VERTICAL’ ‘HORIZONTAL fire tested in accordance
DIRECTION DIRECTION’ with BS 5839-1: 2017.

APPROVALS:
LONDON UNDERGROUND
Phoenix Cable Clamps are compliant with the requiremnts of LUL-1085. Product register number 1661.

This information is subject to change without notice. The information provided has been generated in laboratory conditions, as such results in use may vary.

47
 MATRIX ™

A Flexible Solution for Multiple Cables

Î CLEAT DESIGN ALLOWS FOR MULTIPLE CABLES TO BE

ASSEMBLED IN A MATRIX STYLE WITHIN ONE CLEAT
Î GALVANISED STEEL FRAME AND FIXINGS
Î SOFT LSF POLYMERIC PADS PROTECT CABLE SHEATH
Î SHORT CIRCUIT AND MECHANICALLY TESTED TO IEC
61914
Î FOR FRAME CONFIGURATION DETAILS CONTACT ELLIS

TESTING SUMMARY

Matrix has been tested in line with the International

Standard ‘Cable Cleats for Electrical Installations’ IEC
61914:2015. Typical results are detailed below, please
note that these testing values are maximums and
safety factors appropriate to your application should
be used:

CLASSIFICATION UNITS /
PROPERTY TEST DATA
CLAUSE IEC 61914 CLASSIFICATION
CLEAT TYPE 6.1.3 COMPOSITE -
TEMP. FOR PERMAMENT
6.2 °C -40 to +60
APPLICATION
UV RESISTANCE 6.5.1.2 REFER TO ELLIS -
IMPACT RATING 6.3.5 VERY HEAVY PASS
FLAME PROPAGATION TEST 10.0, 10.1 APPLICATION TIME ≥30s PASS
AXIAL LOAD RATING 6.4.3, 9.4 NEWTONS (N) REFER TO ELLIS
LATERAL LOAD RATING 6.4.2, 9.3 NEWTONS (N) REFER TO ELLIS
91.3kA
RESISTANCE TO CLEATS AT 300MM (REPORT No.
ELECTROMECHANICAL FORCE 6.4, 6.4.4, 9.5 INTERVALS PDL-18.071.2)
(WITHSTANDING MORE THAN ONE
(SHORT CIRCUIT TESTING) PHASE SPACING = Ø45mm
SHORT CIRCUIT)
(MC-4x1-037-G)
This information is subject to change without notice. The information provided has been generated in laboratory conditions, as such results in use may vary.

48
 BESPOKE
BESPOKE SOLUTIONS AND PRODUCTS
We understand that different markets and varying situations demand
different solutions. And as problem solvers, we thrive on new challenges.
So when our standard product range isn’t quite what you need, we can
still help. Visit our website for more information: www.ellispatents.co.uk.

Standard Emperor products modified to suit 2, 4 and 6 cable applications.

Standard Emperor Side Fix Vulcan is

product fitted with a available as a special,
universal base clamp with a side fixing for
designed to retrofit to use when height is
three different undrilled a limiting factor.
ladder rung designs.

MOST REQUESTED SPECIALIST APPLICATIONS

Our customers often require help with the Just like our standard products, our bespoke
following: solutions are designed to withstand the
Mounting products onto a non-standard toughest conditions, and can be made for
structure. specialist environments such as:

 anufacturing products in a non-standard

M High shock load
format or size. High or low temperature
 pecialist surface treatments, such as
S A large temperature range
painting, plating, or galvanizing. Tunnel (including railway)
Developing a completely bespoke product. Unusual or aggressive corrosion
We are well placed to meet these, and many Fire
other, requirements.

49
 MK2 CABLE HANGER
Mild steel cable hanger

Î ROUNDED CORNERS REDUCE

SNAGGING POINTS
Î SPIN GALVANISED (55MICRON OR
150MICRON THICKNESS)
TO BS EN ISO 1461
Î 6MM THICK HANGER AND
BACK PLATE
Î WIDE RANGE OF SIZES AVAILABLE
Î CUSTOM DESIGNS AVAILABLE
Î CURVED BACK PLATE TO SUIT TUNNEL
WALLS AVAILABLE
Î FOR SINGLE HOOKS REFER TO ELLIS

DIMENSIONS (mm) FIXING

PART CABLE Ø NO. OF WEIGHT SWL*
HOLES Ø
NO. (mm) HOOKS A B C D E F W (g) (kg)
(mm)
CH1W1 Up to 50 1 145 105 20 105 n/a 37 40 11 500 200
CH2W1 Up to 50 2 235 195 20 105 90 37 40 11 900 200
CH3W1 Up to 50 3 325 285 20 105 90 37 40 11 1300 200
CH4W1 Up to 50 4 415 375 20 105 90 37 40 11 1700 200
CH5W1 Up to 50 5 505 465 20 105 90 37 40 11 2100 200
CH6W1 Up to 50 6 595 555 20 105 90 37 40 11 2500 200

CH1W2 51-75 1 170 130 20 130 n/a 50 50 13 820 250

CH2W2 51-75 2 295 255 20 130 125 50 50 13 1480 250
CH3W2 51-75 3 420 380 20 130 125 50 50 13 2240 250
CH4W2 51-75 4 545 505 20 130 125 50 50 13 2980 250
CH5W2 51-75 5 670 630 20 130 125 50 50 13 3710 250
CH6W2 51-75 6 795 755 20 130 125 50 50 13 4440 250

CH1W3 76-100 1 185 145 20 145 n/a 62 50 13 980 250

CH2W3 76-100 2 345 305 20 145 160 62 50 13 1900 250
CH3W3 76-100 3 505 465 20 145 160 62 50 13 2820 250
CH4W3 76-100 4 665 625 20 145 160 62 50 13 3600 250
CH5W3 76-100 5 825 785 20 145 160 62 50 13 4660 250
CH6W3 76-100 6 985 945 20 145 160 62 50 13 5600 250

* Load Capacity: Brackets with multiple hook configurations are designed to operate with all hooks carrying their maximum load.
As standard, parts are spin galvanised to BS EN 1461 (55μm), thicker galvanising options are available on request.
Dimensions are provided with a tolerance, refer to detailed drawings for details.
This information is subject to change without notice. The information provided has been generated in laboratory conditions, as such results in use may vary.

50
CONVEX CABLE HANGER
Registered design 6254645

Î ROUNDED CORNERS REDUCE SNAGGING POINTS

Î CONVEX CABLE HANGER PROFILE REDUCES THE RISK OF
CABLE DAMAGE AND FACILITATES CABLE SAG
Î SPIN GALVANISED (55MICRON OR 150MICRON THICKNESS) TO
BS EN ISO 1461
Î WIDE RANGE OF SIZES AVAILABLE
Î CUSTOM DESIGNS AVAILABLE
Î CURVED BACK PLATE TO SUIT TUNNEL
WALLS AVAILABLE
Î SAME STRENGHT AS MK2 HANGER
BUT REDUCED 5MM THICK HANGER
(BACKPLATE 6MM)
Î BESPOKE DESIGNS AND CONFIGURATIONS
CAN BE OFFERED

DIMENSIONS (mm) FIXING

CABLE Ø NO. OF WEIGHT SWL*
PART NO. HOLES Ø
(mm) HOOKS A B C D E F W (g) (kg)
(mm)
CH1W1-C Up to 50 1 145 105 20 105 n/a 37 40 11 490 200
CH2W1-C Up to 50 2 235 195 20 105 90 37 40 11 890 200
CH3W1-C Up to 50 3 325 285 20 105 90 37 40 11 1270 200
CH4W1-C Up to 50 4 415 375 20 105 90 37 40 11 1670 200
CH5W1-C Up to 50 5 505 465 20 105 90 37 40 11 2070 200
CH6W1-C Up to 50 6 595 555 20 105 90 37 40 11 2460 200

CH1W2-C 51-75 1 170 130 20 130 n/a 50 50 13 750 250

CH2W2-C 51-75 2 295 255 20 130 125 50 50 13 1390 250
CH3W2-C 51-75 3 420 380 20 130 125 50 50 13 2050 250
CH4W2-C 51-75 4 545 505 20 130 125 50 50 13 2690 250
CH5W2-C 51-75 5 670 630 20 130 125 50 50 13 3340 250
CH6W2-C 51-75 6 795 755 20 130 125 50 50 13 3990 250

CH1W3-C 76-100 1 185 145 20 145 n/a 62 50 13 870 250

CH2W3-C 76-100 2 345 305 20 145 160 62 50 13 1670 250
CH3W3-C 76-100 3 505 465 20 145 160 62 50 13 2490 250
CH4W3-C 76-100 4 665 625 20 145 160 62 50 13 3290 250
CH5W3-C 76-100 5 825 785 20 145 160 62 50 13 4100 250
CH6W3-C 76-100 6 985 945 20 145 160 62 50 13 4900 250

* Load Capacity: Brackets with multiple hook configurations are designed to operate with all hooks carrying their maximum load.
As standard, parts are spin galvanised to BS EN 1461 (55μm), thicker galvanising options are available on request.

51
 PEGASUS HANGER ®

Modular Cable Hanger System

Patent No. 1507738.1

Î COMPOSITE CABLE HANGER SYSTEM: POLYMER HANGER AND ENCLOSED

CORROSION RESISTANT ALUMINIUM SPINE
Î UPTO 50% LIGHTER THAN CONVENTIONAL STEEL SYSTEM, IMPROVES
INSTALLATION TIME BY REDUCING INSTALLER FATIGUE
Î WILL NOT RUST OR CORRODE
Î INSULATING HANGER WITH EXCELLENT DIELECTRIC PROPERTIES, NO EARTH
BONDING OR GROUNDING REQUIRED
Î CURVED PROFILE HANGER DESIGN ALLOWS NATURL SAG
Î MULTIPLE COMBINATIONS OF HANGERS AVAILABLE, CURVED CONFIGURATION
TO SUIT TUNNEL WALLS ALSO AVAILABLE
Î AVAILABLE IN LUL 1-085 LSF MATERIAL FOR INDOOR APPLICATIONS OR UV
STABALISED MATERIAL FOR EXTERNAL APPLICATIONS
Î CURVED BACK PLATE TO SUIT TUNNEL WALLS AVAILABLE

Hanger SWL kg

100 60

75 45

50 45

CC 25

* Load Capacity: Brackets with multiple hook configurations are designed to operate with all hooks carrying their maximum load.
Dimensions are provided with a tolerance, refer to detailed drawings for details.

This information is subject to change without notice. The information provided has been generated in laboratory conditions, as such results in use may vary.

52
 Dimensions (mm) Fixing Holes Pack Modular Weight SWL
Part No. Ways
A B C1 C2 D E F G H I K Diameter Qty. Weight L kg kg

PG050-1 1 197 121 40 38 60 - 46 - - 92 Ø50 M12 1 0.16 0.3 45

PG050-2 2 276 200 40 38 60 79 46 - - 92 Ø50 M12 1 0.16 0.46 90
PG050-3 3 355 279 40 38 60 79 46 - - 92 Ø50 M12 1 0.16 0.62 135
PG050-4 4 434 358 40 38 60 79 46 - - 92 Ø50 M12 1 0.16 0.78 180
PG050-5 5 513 437 40 38 60 79 46 - - 92 Ø50 M12 1 0.16 0.94 225
PG050-6 6 592 516 40 38 60 79 46 - - 92 Ø50 M12 1 0.16 1.1 270

PG075-1 1 237 161 40 38 60 - 58 - - 108 Ø75 M12 1 0.25 0.39 45

PG075-2 2 357 281 40 38 60 120 58 - - 108 Ø75 M12 1 0.25 0.64 90
PG075-3 3 476 400 40 38 60 120 58 - - 108 Ø75 M12 1 0.25 0.89 135
PG075-4 4 595 519 40 38 60 120 58 - - 108 Ø75 M12 1 0.25 1.14 180
PG075-5 5 714 638 40 38 60 120 58 - - 108 Ø75 M12 1 0.25 1.39 225
PG075-6 6 834 758 40 38 60 120 58 - - 108 Ø75 M12 1 0.25 1.64 270

PG100-1 1 279 203 40 38 60 - 71 - - 122 Ø100 M12 1 0.41 0.55 60

PG100-2 2 440 364 40 38 60 161 71 - - 122 Ø100 M12 1 0.41 0.96 120
PG100-3 3 600 524 40 38 60 161 71 - - 122 Ø100 M12 1 0.41 1.37 180
PG100-4 4 760 684 40 38 60 161 71 - - 122 Ø100 M12 1 0.41 1.78 240
PG100-5 5 921 845 40 38 60 161 71 - - 122 Ø100 M12 1 0.41 2.19 300
PG100-6 6 1085 1009 40 38 60 161 71 - - 122 Ø100 M12 1 0.41 2.6 360

PGCC-1 1 279 203 40 38 60 - 74 107 55 57 - M12 1 0.31 0.45 25

PGCC-2 2 440 364 40 38 60 161 74 107 55 57 - M12 1 0.31 0.76 50
PGCC-3 3 600 524 40 38 60 161 74 107 55 57 - M12 1 0.31 1.07 75
PGCC-4 4 760 684 40 38 60 161 74 107 55 57 - M12 1 0.31 1.38 100
PGCC-5 5 921 845 40 38 60 161 74 107 55 57 - M12 1 0.31 1.69 125
PGCC-6 6 1085 1009 40 38 60 161 74 107 55 57 - M12 1 0.31 2 150

PEGASUS IS A MODULAR SYSTEM

C1

D
C1

ØK 50 AND CAN BE SUPPLIED IN ANY CONFIGURATION

ØK Hanger 50
E

Hanger
E

F I
F I
ØK PART NUMBERS FOR SPECIAL CONFIGURATIONS CAN
ØK 75
Hanger 75 BE WORKED OUT AS FOLLOWS:
E

Hanger
I Example: Part Number for product shown would be:
F
F I PG 50-1/75-1/100-1/CC-1
ØK
100 PG defines the product as Pegasus
A

ØK
Hanger 100
E
A

Hanger
E

The size and number of hangers is then listed as shown,

F starting from the top
I
F
I
Any number of hangers can be specified in any order
G CC Standard material is suitable for tunnel applications, for UV
Hanger CC
E

G
stabalised material add -UV to part#
H

Hanger
H

I Standard product is straight but can be supplied curved, for

F
I
F curved option add -C to end of part
C2

C2

53
 TRIPLEX CABLE SURROUND
UK (2514384), EUROPEAN (2806198)
and US (9,404,605) Patent

Î TRIPLEX CABLE SURROUND OVERCOMES THE TWIST IN

TRIPLEX CABLE TO ALLOW THE CABLE TO BE CLEATED AT
ANY POINT ALONG ITS LENGTH
Î ADAPTOR MANUFACTURED IN A LSF V0 POLYMER
Î CAN BE USED WITH EMPEROR SINGLE, VULCAN+,
2F+ AND 2A CLEATS
Î REFER TO INDIVIDUAL PRODUCT DATA SHEETS FOR
PERFORMANCE TO IEC 61914
Î SOLD SEPERATLEY TO THE CLEATS AS STANDARD BUT CAN
BE PROVIDED ASSEMBLED INSIDE THE CLEAT ON REQUEST

CABLE RANGE DEPTH WEIGHT NOTE:

PART NO. SFT2F+XX part numbers refer to a
MIN MAX (mm) (g)
SFT26 24 28 62 67.3 deeper SFT+ moulding to be used
SFT31 / SFT2F+31 28 34 62 / 84 87 / 125 with 2F+ and 2A clamps, see page
SFT36 / SFT2F+36 33 39 62 / 84 113 / 160 2 for more detail.
SFT43 / SFT2F+43 39 47 62 / 109 140 / 272
SFT51 / SFT2F+51 47 55 62 / 134 212 / 447

NOTE: ‘CABLE RANGE’ REFERS TO THE OUTSIDE DIAMETER THE INDIVIDUAL CABLES INSIDE THE TRIPLEX BRAID

54
CABLE CLEAT SELECTION DETAIL FOR CLEATS TO BE USED WITH THE TRIPLEX CABLE SURROUND

CABLE OD ADAPTOR
SFT OD (mm) VULCAN+ EMPEROR 2F + CLAMP 2A CLAMP
(mm) TYPE
24 56 SFT26 VRT+03 ES51-59 2F+09 2A-09
25 58 SFT26 VRT+03 ES51-59 2F+10 2A-10
26 59 SFT26 VRT+03 ES51-59 2F+10 2A-10
27 61 SFT26 VRT+04 ES58-66 2F+10 2A-10
28 63 SFT26 VRT+04 ES58-66 2F+10 2A-10

28 64 SFT31 VRT+05 ES58-66 2F+11 2A-11

29 66 SFT31 VRT+05 ES65-73 2F+11 2A-11
30 68 SFT31 VRT+05 ES65-73 2F+11 2A-11
31 70 SFT31 VRT+06 ES65-73 2F+1200 2A-1200
32 71 SFT31 VRT+06 ES65-73 2F+1200 2A-1200
33 73 SFT31 VRT+06 ES65-73 2F+1200 2A-1200
34 75 SFT31 VRT+06 ES73-85 2F+1200 2A-1200

33 76 SFT36 VRT+06 ES73-85 2F+1201 2A-1201

34 78 SFT36 VRT+06 ES73-85 2F+1201 2A-1201
35 80 SFT36 VRT+07 ES73-85 2F+1201 2A-1201
36 82 SFT36 VRT+07 ES73-85 2F+1201 2A-1201
37 83 SFT36 VRT+07 ES73-85 2F+1202 2A-1202
38 84 SFT36 VRT+07 ES73-85 2F+1202 2A-1202
39 86 SFT36 VRT+08 ES84-94 2F+1202 2A-1202

39 88 SFT43 VRT+08 ES84-94 2F+1202 2A-1202

40 89.5 SFT43 VRT+08 ES84-94 2F+1202 2A-1202
41 93 SFT43 VRT+08 ES84-94 2F+131 2A-131
42 94 SFT43 VRT+09 ES84-94 2F+131 2A-131
43 95 SFT43 VRT+09 ES94-118 2F+131 2A-131
44 97 SFT43 VRT+09 ES94-118 2F+131 2A-131
45 99 SFT43 VRT+10 ES94-118 2F+132 2A-132
46 102 SFT43 VRT+10 ES94-118 2F+132 2A-132
47 104.5 SFT43 VRT+11 ES94-118 2F+132 2A-132

47 105 SFT51 VRT+11 ES94-118 2F+132 2A-132

48 107 SFT51 VRT+11 ES94-118 2F+141 2A-141
49 110 SFT51 VRT+12 ES94-118 2F+141 2A-141
50 112 SFT51 VRT+12 ES94-118 2F+141 2A-141
51 114 SFT51 VRT+12 ES94-118 2F+142 2A-142
52 117 SFT51 VRT+12 ES94-118 2F+142 2A-142
53 119.5 SFT51 VRT+13 ES118-130 2F+142 2A-142
54 121 SFT51 VRT+13 ES118-130 2F+151 2A-151
55 123.5 SFT51 VRT+13 ES118-130 2F+151 2A-151

***FOR PART NUMBERS IN RED THE WIDER SFT2F+ NEEDS TO BE USED TO SUIT THE INCREASED DEPTHS OF THE CLAMPS***

This information is subject to change without notice. The information provided has been generated in laboratory conditions, as such results in use may vary.

55
 SINGLE BOLT FIXING CLAMP
Polymer clamp on steel bracket

Î HEAVY DUTY FIXING BRACKET ALLOWS POLYMERIC

2 HOLE CLAMPS TO BE FIXED ON A SINGLE BOLT
Î CLAMP CAN BE SUPPLIED IN LSF NYLON OR
STANDARD POLYPROPYLENE
Î ADAPTOR BRACKET IS MANUFACTURED IN ZINC
PLATED MILD STEEL
Î HEADS OF FIXING BOLTS ARE WELDED CAPTIVE TO
EASE INSTALL
Î FOR CLAMP PERFORMANCE TO IEC 61914 REFER
TO ELLIS

DIMENSIONS (mm) WEIGHT (g)

CLAMP CABLE
PART NO. MATERIAL RANGE
SUFFIX (mm) W H D B LSF

2FAS+08 B or LSF 46-51 103 110 54 353.9 382.9

2FAS+09 B or LSF 51-57 103 110 54 368 392
2FAS+10 B or LSF 57-64 103 110 54 362.1 395.5
2FAS+11 B or LSF 64-70 130 143 54 433 474.3
2FAS+1200 B or LSF 70-76 128 143 75 477.1 507
2FAS+1201 B or LSF 76-83 135 148 75 491 523.5
2FAS+1202 B or LSF 83-90 143 156 75 505.3 545.6

PART NO. EXAMPLE:

For a single bolt fixing 2F+11 clamp in LSF nylon use the part number:2FAS+11+LSF.

This information is subject to change without notice. The information provided has been generated in laboratory conditions, as such results in use may vary.

56
 INDUSTRIAL CABLECLAMP
Manufactured as standard in Black LLDPE (B) or in a London Underground Approved Material (LUL).
Used to fix power cables in indoor and outdoor applications.

Part No. Cable Range Dimensions mm Pack SWL Weight g

Fixing Holes
LLDPE LUL Min Dia. mm Max Dia. mm W H D Qty kgf LLDPE LUL
17-01B 17-01LUL 10 15 27.8 17.6 12 1 x M4 100 18 2.0 3.5
17-02B 17-02LUL 12 17 32.0 20.8 14 1 x M4 100 24 3.3 5.4
17-03B 17-03LUL 15 20 37.1 25.3 16 1 x M4 100 32 5.2 8.6
17-04B 17-04LUL 18 24 41.0 29.6 18 1 x M4 100 39 7.3 12.2
17-05B 17-05LUL 22 29 52.1 35.4 20 1 x M6 50 52 11.2 18.6
17-06B 17-06LUL 26 34 58.2 40.9 22 1 x M6 50 66 16.5 27.9
17-07B 17-07LUL 32 42 69.3 49.2 25 1 x M6 25 79 25.6 42.9
17-08B 17-08LUL 39 51 81.7 58.5 26 1 x M6 25 93 36.2 60.1

The LUL version of this clamp is compliant with the requirement of London Underground Standard 1-085. Product Register No. 365.

ELITE RANGE-TAKER CABLECLAMP

Manufactured as standard in Black Polypropylene (B), White Polypropylene (W) or Black Flame Retardant VO Zero Halogen
Phosphorus-Free Nylon (LSF). The clamp incorporates a fully releasable strap allowing ease of re-installation. Used to fix power
cables in indoor and outdoor applications.

Material Cable Range Dimensions mm Pack Weight g

Part No. Fixing Holes
Suffix Min Dia. mm Max Dia. mm W H D Qty B/W LSF
15-1 B,W or LSF 9.5 16.0 27.0 37.0 25.0 1 x M6 100 6.0 8.0
15-2 B,W or LSF 15.0 25.0 36.0 37.0 32.0 1 x M6 50 8.0 10.9
15-3 B,W or LSF 23.0 37.0 48.0 48.0 36.0 1 x M6 50 15.0 18.1
15-4 B,W or LSF 34.0 52.0 63.0 65.0 40.0 1 x M6 25 20.0 25.5

57
 EARTHING STRIP CLIP
Manufactured as standard in Black Polypropylene (B) or Grey Flame Retardant Polypropylene
(FR) Used to fix PVC coated, bare copper or aluminium strip.

IMPERIAL SIZES
Fixing Holes
Material Strip Size Hold Off Length Pack Weight
Part No. (slotted)
Suffix inches inches inches Qty g
inches
60-04 B or FR 1 x 1⁄8 5⁄16 2 7⁄16 x 5⁄16 100 12
60-05 B or FR 1 1⁄4 x 1⁄8 3 ⁄8 2 5⁄8 7⁄16 x 5⁄16 100 21
60-06 B or FR 1 1⁄4 x 3⁄16 5⁄
16 2 5⁄8 7⁄ x 5⁄
16 16 100 20
60-08 B or FR 1 1⁄2 x 3⁄16 5⁄
16 2 5⁄8 7⁄ x 5⁄
16 16 100 20
60-10 B or FR 1 ⁄2 x ⁄8
1 1 3⁄
8 2 5⁄8 7⁄ x 5⁄
16 16 100 20
60-15 B or FR 2 x 1⁄8 1⁄
4 3 ⁄8
1 7⁄ x 5⁄
16 16 100 24
60-26 B or FR 1 x 1⁄8 3⁄
4 2 ⁄81 7⁄ x 5⁄
16 16 100 16
60-27 B or FR 1 x 3⁄16 5⁄
8 2 1⁄8 7⁄ x 5⁄
16 16 100 16
60-28 B or FR 1 1⁄2 x 3⁄16 5⁄
8 2 7⁄8 7⁄ x 5⁄
16 16 100 25
60-32 B or FR 1 1⁄4 x 1⁄4 5⁄
8 3 7⁄ x 5⁄
16 16 100 25
60-34 B or FR 1 1⁄2 x 1⁄8 3⁄
4 3 7⁄ x 5⁄
16 16 100 25
60-36 B or FR 1 1⁄2 x 1⁄4 5⁄
8 3 7⁄ x 5⁄
16 16 100 24
60-37 B or FR 1 1⁄2 x 3⁄8 3⁄
8 2 7 ⁄8 7⁄ x 5⁄
16 16 100 23
60-38 B or FR 1 3⁄4 x 1⁄8 3⁄
4 3 3⁄8 7⁄ x 5⁄
16 16 100 27
60-39 B or FR 1 3⁄4 x 1⁄4 5⁄
8 3 3⁄8 7⁄ x 5⁄
16 16 100 27
60-40 B or FR 2 x 1⁄8 3⁄
4 3 3⁄8 7⁄ x 5⁄
16 16 100 30
60-42 B or FR 2 x 1⁄4 5⁄
8 3 3⁄8 7⁄ x 5⁄
16 16 100 25
60-44 B or FR 2 x 3⁄8 3⁄
8 3 3 ⁄8 7⁄ x 5⁄
16 16 100 24

METRIC SIZES
Fixing Holes
Material Strip Size Hold Off Length Pack Weight
Part No. (slotted)
Suffix mm mm mm Qty g
mm
70-04 B or FR 20 x 4 17 55 11 x 8 100 15
70-06 B or FR 20 x 6 16 55 11 x 8 100 16
70-07 B or FR 25 x 6 16 55 11 x 8 100 14
70-08 B or FR 50 x 4 18 87 11 x 8 100 28
70-09 B or FR 40 x 6 16 87 11 x 8 100 28
70-10 B or FR 50 x 6 15 87 11 x 8 100 26
70-11 B or FR 40 x 4 18 87 11 x 8 100 28
70-12 B or FR 50 x 10 11 87 11 x 8 100 24
70-14 B or FR 60 x 6 18 97 11 x 8 100 31
70-16 B or FR 80 x 6 19 118 11 x 8 50 41

CABLE CONDUIT CLIP

Manufactured as standard in Black Nylon, this surface
mounted Conduit Clip comes complete with a captive
hinged over-strap. Used to fix conduit in indoor and
outdoor applications.

Material D H W Fixing Holes Stand Pack Weight

Part No.
Suffix mm mm mm mm off Qty g

CC20B B or W 20 35 35 4 5 100 8.8

CC25B B or W 25 40 40 4 5 100 10.6

58
 FRAMING CHANNEL ACCESSORIES

FRAMING CHANNEL END CAPS

Manufactured as standard in Black or White Polypropylene (PP), Black or White LDPE (PE)
or Nylon (LSF). The EC version is a spring fit whilst the 'Gripper' version has fins which bend
and deform into the channel. There is provision to incorporate the customers logo. Also
available to order in other colours.

Size Material Pack Weight

Part No. Description Colour
mm Suffix Qty g
91-ECLB ‘EC’ type channel end cap 41 x 41 PP Black 100 7.3
91-ECLW ‘EC’ type channel end cap 41 x 41 PP White 100 7.3
91-ECSB ‘EC’ type channel end cap 41 x 21 PP Black 100 3.2
91-ECSW ‘EC’ type channel end cap 41 x 21 PP White 100 3.2
91-JGLB ‘Gripper’ type channel end cap 41 x 41 PE Black 100 9.4
91-JGLW ‘Gripper’ type channel end cap 41 x 41 PE White 100 9.4
91-JGSB ‘Gripper’ type channel end cap 41 x 21 PE Black 100 4.4
91-JGSW ‘Gripper’ type channel end cap 41 x 21 PE White 100 4.4
91-JGLLSF ‘Gripper’ type channel end cap 41 x 41 LSF Black 100 9.4
91-JGSLSF ‘Gripper’ type channel end cap 41 x 21 LSF Black 100 4.4

BUTTERFLY CLIP
Manufactured as standard in Black Nylon, the
butterfly clip snaps into 41mm wide framing channel.
It will accommodate a cable tie of up to 10mm in
width (not included). Used to allow cables to be
strapped at right angles to the channel.

Material Pack Weight

Part No.
Suffix Qty g
91-BC NY 100 3.8

THERMAL SPACER
Manufactured as standard in Black Polypropylene.
A slotted hole is also provided for running heat
detection cable. Used to ensure separation of the
cable on cable ladder, framing channel and ladder
rungs with reduced return flanges.

Height Above Material Pack Weight

Part No.
Ladder Rung Suffix Qty g
91-TSL1 75mm PP 100 19.5
91-TS7.5 50mm PP 100 14.7

59
 FRAMING CHANNEL ACCESSORIES

FRAMING CHANNEL WASHER

Manufactured as standard in the materials shown this washer is recommended for use
when our range of 2F+ clamps are fitted to framing channel.

Hole Size Pack Weight

Part No. Size Material Suffix
mm Qty g
91-WZ 40 x 40 Mild Steel Zinc Plated 10 100 33
91-WZ-X 40 x 40 Mild Steel Zinc Plated 12 100 33
91-W-2 40 x 40 A2 Stainless Steel 10 100 34
91-W-4 40 x 40 A4 Stainless Steel 12 100 34
91-WG 40 x 40 Mild Steel Galvanised 10 100 37

CHANNEL NUTS
Manufactured as standard in Bright Zinc Plated Mild Steel.

Part No. Material Suffix Pack Qty Weight g

0F-M10-CN00-Z M10 Channel Nut (long spring) 100 38
0F-M10-CN01-Z M10 Channel Nut (short spring) 100 37
0F-M10-CN02-Z M10 Channel Nut (no spring) 100 36

INSULATION PLATE
Manufactured as standard in Black Polypropylene or Black Flame Retardant VO Zero
Halogen Phosphorus-Free UV Stabilised Nylon (LSF), this insulation plate can be used to
provide a barrier where galvanic reaction may occur between dissimilar metals, e.g. when
installing stainless steel cleats onto galvanised steel channel.

Part No. Material Suffix Pack Qty Weight g

91-IP B 100 5
91-IP 12 B/LSF 100 5
91-IP-1 B/LSF 100 5
91-IP-2 B/LSF 100 5
91-IP-3 B/LSF 100 5

TRUNKING ADAPTOR
Manufactured as standard in Black Polypropylene (B) or Nylon (LSF), this adaptor can be
used to fit one hole and two hole cable clamps when cables are being installed parallel to
the trunking.

Part No. Material Suffix Pack Qty Weight g

91-TA B 100 5.3
91-TA LSF 100 7.1

60
 SPECIALIST CABLE FIXINGS FOR UTILITIES

SINGLE WAY FIXING CABLE CLEAT TWO WAY SINGLE FIXING CABLE
Manufactured as standard in Black
CLEAT
Polypropylene (B) and Grey Flame Retardant Manufactured as standard in Black
Polypropylene (FR) or Black Acetal (A). Polypropylene (B) and Grey Flame Retardant
A robust cleat used for securing armoured Polypropylene (FR). A robust cleat used for
power cables. securing two armoured power cables on flat
surfaces.

Part Material Cable Dia. Fixing Pack Weight

No. Suffix mm Holes mm Qty g Part Material Cable Dia. Fixing Pack Weight
No. Suffix mm Holes mm Qty g
10-034 B or FR 9.0 3 200 0.8
10-042 B or FR 10.6 4 200 1.9 2W37 B 9.4 4 100 2.2
10-046 B or FR 11.7 4 200 2.8 2W42 B or FR 10.6 4 100 3.3
10-053 B or FR 13.5 4 200 2.8 2W46 B or FR 11.7 4 100 3.6
10-056 B or FR 14.2 4 200 3.1 2W53 B or FR 13.5 4 100 4.0
10-061 B or FR 15.5 4 200 3.1 2W56 B or FR 14.2 4 100 5.0
10-065 B or FR 16.5 4 200 4.8
10-072 B or FR 18.2 4 200 4.2
10-083 B or FR 21.1 6 100 7.7
10-098 B or FR 24.8 6 100 6.4
10-106 B or FR 27.0 6 100 7.5
10-120 A 31.0 6 50 15.8
10-138 A 35.0 6 50 23.0
THREE & FOUR WAY DOUBLE FIXING
CABLE CLEAT
Manufactured as standard in Black
Polypropylene (B) and Grey Flame Retardant
Polypropylene (FR). A robust cleat used for
securing three or four armoured power cables
on flat surfaces.
SINGLE WAY HEAVY DUTY
RADIUSED POLE CLEAT
Part Material Cable Dia. Fixing Pack Weight
Manufactured as standard in Black No. Suffix mm Holes mm Qty g
Polypropylene (B) or Black Flame Retardant
VO Zero Halogen Phosphorus-Free UV 3W46 B or FR 11.7 4 200 8.7
Stabilised Nylon (LSF). A curved robust cleat 3W56 B or FR 14.2 4 200 9.3
used for securing power cables on 200mm 4W10 B 4 x 15 4 100 9.5
diameter wooden electricity supply poles.

Part Material Cable Dia. Fixing Pack Weight

No. Suffix mm Holes mm Qty g

35-04 B 27.6 8 100 13.0

35-06 B 31.2 8 100 12.0 TWO WAY HEAVY DUTY RADIUSED
35-065 B 33.5 8 100 18.5 POLE CLEAT
35-07 B 36.0 8 100 14.0 Manufactured as standard in Black
35-08 B 37.8 8 100 16.0 Polypropylene (B) or Black Flame Retardant VO
35-10 B 41.5 8 100 26.0 Zero Halogen Phosphorus-Free UV Stabilised
35-12 B 44.6 8 100 25.0 Nylon (LSF). A curved robust cleat used
35-22 B 49.2 8 100 23.0 for securing two power cables on 200mm
diameter wooden electricity poles.
35-26 B 53.5 8 50 25.0
35-30 B 56.6 8 50 27.0
35-34 B 61.6 11 50 53.0 Part Material Cable Dia. Fixing Pack Weight
35-42 B 72.5 11 25 84.0 No. Suffix mm Holes mm Qty g

2WP04 B 11.7 4 100 6.1

2WP06 B 13.2 4 100 5.4
2WP10 B 16.5 4 100 6.5
2WP15 B 19.1 8 100 7.3

61
 SPECIALIST CABLE FIXINGS FOR UTILITIES

THREE WAY HEAVY DUTY RADIUSED SINGLE WAY SNAP ON SADDLE

POLE CLEAT CLIP
Manufactured as standard in Black Manufactured as standard in Black
Polypropylene (B) or Black Flame Retardant VO Polypropylene (B) and Grey Flame Retardant
Zero Halogen Phosphorus-Free UV Stabilised Polypropylene (FR). Used for mounting
Nylon (LSF). A curved robust cleat used for cables and pipes on flat surfaces also
securing three power cables on 200mm providing clearance between the cable or
diameter wooden electricity supply poles. pipe and the mounting surface.

Fixing
Part Material Cable Dia. Fixing Pack Weight Part Material Cable Dia. Pack Weight
Holes
No. Suffix mm Holes mm Qty g No. Suffix mm Qty g
mm
3WP04 B 11.7 6.35 200 8.0 90-M095 B or FR 9.5 3.75 500 1.8
3WP06 B 13.2 6.35 200 8.2 90-M120 B or FR 12.0 3.75 500 2.4
3WP10 B 16.5 6.35 200 9.8 90-01 B or FR 12.7 3.75 500 2.2
3WP15 B 19.2 6.35 200 12.5 90-02 B or FR 15.0 3.75 500 2.4
3WP20 B 21.7 6.35 200 13.7 90-03 B or FR 17.5 4.0 500 3.3
3WP2 B 15.0 6.35 200 10.7 90-075 B or FR 19.0 4.0 500 3.6
3WN05 B 24.0 6.35 200 11.9 90-04 B or FR 23.0 4.0 500 3.2
90-04.1 B or FR 24.2 4.0 500 3.1
90-05 B or FR 25.4 4.0 500 4.3
90-06 B or FR 27.5 5.0 500 5.3
TWO WAY CLEAT AND SPACER 90-07 B or FR 31.7 5.0 200 6.8
Manufactured as standard in Black 90-08 B or FR 34.0 5.0 200 6.7
Polypropylene (B) and Grey Flame Retardant 90-09 B or FR 38.1 5.0 100 6.8
Polypropylene (FR). Used for mounting power 90-10 B or FR 42.0 5.0 200 8.7
cables to poles and flat surfaces. A spacer is 90-11 B or FR 42.6 5.0 200 9.5
available to facilitate the stacking of the cleat
90-12 B or FR 44.4 5.0 100 7.4
90-13 B or FR 48.7 5.0 200 10.4
Part Material Cable Dia. Fixing Pack Weight 90-14 B or FR 53.9 5.0 100 14.4
No. Suffix mm Holes mm Qty g 90-143 B or FR 55.0 6.0 100 26.3
90-15 B or FR 60.5 6.0 100 25.8
E272 B or FR 11.1-19.1 10.0 50 pairs 22.7
90-19 B or FR 75.0 7.5 50 40.8
E272S B or FR 11.1-19.1 10.0 50 15.1
90-24++ B 88.9 10.0 25 70.7
E273 B or FR 6.35-12.0 6.63 50 pairs 11.4
90-S B Saddle Clip Spacer* 1.2
E273S B or FR 6.35-12.0 6.63 50 7.2
S = Spacer ++ This item is supplied with a base plate.
* Spacer suitable for use with all saddle clips (except part no 90-24).
Provides additional separation of the cable or pipe from the mounting surface of
approximately 12.5mm.

CABLE TIE BASE

Manufactured in Nylon (NY). Used to
accommodate a cable tie of up to 10mm in ABC WALL CLEAT
width (not included) Manufactured as standard in Black
Polypropylene (B). Used as a simple solution
Part Material Fixing Holes Pack Weight
to the fixing of vertical and horizontal serial
No. Suffix mm Qty g bundled cable to walls and other surfaces.
(Tested to ESI Standards 43-14.)
115-001 NY 6 100 2.5

Part Material A H D Fixing Holes Pack Weight

No. Suffix mm mm mm mm Qty g

UNIVERSAL CLEAT 115-010 B 10 47 31 6 100 12

Manufactured as standard in Black Polypropylene 115-050 B 50 59 37 6 100 27
(B). Used for stacking cables vertically or 115-100 B 100 72 43 6 25 54
horizontally using a framework system. More 115-125 B 125 80 48 6 25 74
detail can be supplied on request Please note: These clamps are available in 4 stand off variants denoted by ‘A’.

Part Material Cable Dia. Pack Weight

No. Suffix mm Qty g

30U-1 B 23.8-38.1 50 pairs 89

62
 JOINTERS’ TOOLS

CABLE CORE TWISTERS

Manufactured in Acetal (International Orange). Used to manipulate bare or insulated
cable cores and to align the cores prior to jointing.

Complies with the Dielectric testing of IEC 60900-1

3 CORE
Part No. Cores Core Range Size mm2 Pack Qty Weight g

110-95C 3 70 Bare x 95 Bare 10 54

110-X01C 3 95 Bare x 95 Ins 10 51
110-120C 3 70 Bare x 120 Bare 10 51
110-120IC 3 70 Ins x 120 Ins 10 49
110-X06C 3 120 Bare x 120 Ins 10 48
110-X07C 3 185 Bare x 185 Ins 10 148
110-240C 3 185 Bare x 240 Bare 10 146
110-300C 3 185 Bare x 300 Bare 10 147
110-300IC 3 185 Ins x 300 Ins 10 139
110-X08C 3 300 Bare x 300 Ins 10 138
110-X09C 3 70 Bare x 70 Ins 10 53
110-X10C 3 95 Bare x 185 Bare 10 154
110-X11C 3 95 Ins x 185 Ins 10 149

3 & 4 CORE
Part No. Cores Core Range Size mm2 Pack Qty Weight g

110-X03C 3&4 3C 95 Ins x 4C 95 Ins 10 50

110-X04C 3&4 3C 185 Ins x 4C 185 Ins 10 145
110-X05C 3&4 3C 300 Ins x 4C 240 Ins 10 135
110-X12C 3&4 3C 300 Bare x 4C 300 Bare 10 141
110-X13C 3&4 3C 300 Ins x 4C 300 Ins 10 134

4 CORE
Part No. Cores Core Range Size mm2 Pack Qty Weight g

110-41C 4 95 Bare x 95 Ins 10 51

110-42C 4 185 Ins x 240 Ins 10 142
110-43C 4 185 Bare x 240 Bare 10 150
110-44C 4 185 Ins x 300 Ins 10 141
110-48C 4 120 Ins x 185 Ins 10 150
110-X02C 4 185 Bare x 300 Bare 10 146
110-X14C 4 95 Bare x 185 Bare 10 155
110-X15C 4 95 Ins x 185 Ins 10 149
110-X16C 4 95 Ins stranded x 95 Ins solid 10 51
110-X17C 4 300 Ins stranded x 300 Ins solid 10 140

CABLE CORE FORMER Core Separation

Manufactured in Nylon. Used to Part No. Pack Qty Weight g
Distance mm
hold the cores of a three core
120-F 32 - 58 10 44.1
cable apart whilst a joint is being
made. The central hole provides
a facility for positioning a mastic
bung.

63
 JOINTERS’ TOOLS

CABLE CORE GUARD

Manufactured in Nylon (International Orange). Used to provide separation between a
cable core which is being cut and neighbouring cores.

Part No. Nominal Lift mm Pack Qty Weight g

120-CG1C 23 10 57

CABLE CORE STRIPPER

Manufactured in a Polymeric material. Used to remove insulation and sheathing from live
armoured power cables. The tool has an exceptionally strong, tough blade and a unique
handle moulded in a softer plastic which provides a cushion effect when a hammer is
used to initiate a cut in the cable sheath.

Part No. Nominal Lift mm Pack Qty Weight g

120-CS 90 10 183

Complies with the Dielectric testing of IEC 60900-1

CABLE CORE WEDGE

Manufactured in Nylon (International Orange). Used to prise apart and to separate the
cores of cables.

Nominal Lift
Part No. Length mm Width mm Pack Qty Weight g
mm
110-1NYC 150 25 15 10 41
110-2NYC 225 25 25 10 65
110-3NYC 225 25 38 10 89
110-4NYC 150 13 25 10 32

CABLE CORE SPREADER

Manufactured in Nylon. Used to hold apart the cores of a cable when jointing cables.

Part No. Core Core Range Size mm2 Pack Qty Weight g

120-VNY 3 240 - 300 100 45

120-WNY 3 185 100 38
120-YNY 3 95 - 150 100 30
120-ZNY 3 95 100 24
120-UNY 4 Universal 100 37
120-15 4 Universal 100 10
120-20 4 Universal 100 12

64
 LADDER ADAPTORS

Î ADAPTORS TO FIT ELLIS CLEATS TO WIDE RANGE OF LADDER

Î STAINLESS STEEL CONSTRUCTION
Î SUPPLIED WITH FIXNGS
Î AVAILABLE WITH M10 OR M12 FIXINGS

PART NO. TO SUIT LADDER

KIT0008-M12 1” SQUARE, M10 FIXING

KIT0012 23-27MM ROUND, M10 FIXING

KIT0020 21 X 17MM OVAL, M10 FIXING

KIT0039 1.5” X 0.375” RECTANGULAR, M10 FIXING

KIT0041-M10 1.125” X 0.75” RECTANGULAR, M10 FIXING

KIT0041-M12 1.125” X 0.75” RECTANGULAR, M12 FIXING

KIT0042-M10 1.5” X 0.5” RECTANGULAR, M10 FIXING

KIT0042-M12 1.5” X 0.5” RECTANGULAR, M12 FIXING

KIT0043-M10 41 X 21MM RECTANGULAR, M10 FIXING

KIT0045 1.0” ROUND, M10 FIXING

KIT0046-M10 1.5”X1.0” RECTANGULAR, M10 FIXING

KIT0046-M12 1.5”X1.0” RECTANGULAR, M12 FIXING

KIT0047-M10 27MM ROUND X 23MM FLAT D RUNG, M10 FIXING

KIT0047-M12 27MM ROUND X 23MM FLAT D RUNG, M12 FIXING

FOR FULL DETAIL DIMENSIONS REFER TO ELLIS DRAWING 5553

65
 NOTES

66
NOTES

67
Ellis Patents Ltd T. +44 (0)1944 758395
High Street, Rillington, Malton F. +44 (0)1944 758808
North Yorkshire YO17 8LA [email protected]
United Kingdom www.ellispatents.co.uk