Scribd
Upload
44 views

KPI: Key Performance Indicator

The document discusses key performance indicators (KPIs) for LTE radio access networks. It describes several categories of KPIs: accessibility, retainability, mobility, integrity, availability, and utilization. Specific KPIs are provided for each category like RRC setup success rate for accessibility and call drop rate for retainability. Formulas are presented for calculating some of the KPIs along with examples of their use for network optimization and monitoring performance.

Uploaded by

Bulbul malviya
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
44 views

KPI: Key Performance Indicator

The document discusses key performance indicators (KPIs) for LTE radio access networks. It describes several categories of KPIs: accessibility, retainability, mobility, integrity, availability, and utilization. Specific KPIs are provided for each category like RRC setup success rate for accessibility and call drop rate for retainability. Formulas are presented for calculating some of the KPIs along with examples of their use for network optimization and monitoring performance.

Uploaded by

Bulbul malviya
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 6

KPI

16 October 2023 10:35

LTE KPI

KPI: Key Performance Indicator


The purpose is to check the performance of Network. We have categories of KPI and numbers of KPI of each category. In the Opt imization process we have to
check the KPI value to monitor and optimize the radio network performance in order to provide better subscriber quality or to achieve better use of installed
network resources . Typically KPI can be categorized into following subcategories:

Accessibility KPI

Retainability KPI

Mobility
KPI

Integrity
KPI

Availability
KPI

Utilization
KPI

Let's break down KPI per each category:


Accessibility KPI
Are used to measure properly of whether services requested by users can be accessed in given condition, also refers to the quality of being available when users
needed. eg. user request to access the network, access the voice call, data call, ......
Retainability KPI
Are used to measure how the network keep user's possession or able to hold and provide the services for the users
Mobility KPI
Are used to measure the performance of network which can handle the movement of users and still retain the service for the us er, such as handover,...
Integrity KPI
Are used to measure the character or honesty of network to its user, such as what is the throughput, latency which users were served.
Availability KPI
Are used to measure the availability of network, suitable or ready for users to use services.
Utilization KPI
Are used to measure the utilization of network, whether the network capacity is reached its resource.
KPIs for LTE RAN (Radio Access Network)
LTE KPI INDICATORS
Accessibility • RRC setup success rate
KPI • ERAB setup success rate
• Call Setup Success Rate
Are used to measure properly of whether services requested by users can be accessed in given condition, also refers to the qu ality of being available
when users needed. eg. user request to access the network, access the voice call, data call, ......
Retainability • Call drop rate
KPI • Service Call drop rate
Are used to measure how the network keep user's possession or able to hold and provide the services for the users
Mobility • Intra-Frequency Handover Out Success Rate
KPI • Inter-Frequency Handover Out Success Rate
• Inter-RAT Handover Out Success Rate (LTE to WCDMA)
Are used to measure the performance of network which can handle the movement of users and still retain the service for the us er, such as handover,...
Integrity • E-UTRAN IP Throughput
KPI • IP Throughput in DL
• E-UTRAN IP Latency
Are used to measure the character or honesty of network to its user, such as what is the throughput, latency which users were served.
Availability • E-UTRAN Cell Availability
Partial cell availability (node restarts excluded)
KPI Are used to measure how the network keep user's possession or able to hold and provide the services for the users
Utilization • Mean Active Dedicated EPS Bearer Utilization
KPI
Are used to measure the utilization of network, whether the network capacity is reached its resource.

ACCESSIBILITY KPI:

☰ RRC Setup Success Rate


RRC setup success rate is calculated based on the counter at the eNodeB when the eNodeB received the RRC connection request f rom UE. Number of RRC
connection attempt is collected by the eNodeB to the measurement at point A, and the number of successful RRC connection calc ulated at point C. Here's an
illustration:

Interview Page 1
illustration:

☰ ERAB setup success rate


ERAB setup success rate KPI shows the probability of success ERAB to access all services including VoIP in a cell or radio network. KPI is calculated based
counter ERAB connection setup attempt (point A) and successful ERAB setup (point B). The explanation is as given in the following illustration:

☰ Call Setup Success Rate


Call Setup Success Rate KPI call setup indicates the probability of success for all service on the cell or radio network. KPI is calculated by multiplying the RRC
setup success rate KPI, S1 signaling connection success rate KPI, and ERAB success rate KPI. The table below describes the definition Call Setup Success
Rate:

Interview Page 2
RETAIN-ABILITY KPI:

☰ Call Drop
VoIP call drop arise when VoIP ERAB release is not normal. Each ERAB associated with QoS information. Here's an illustration of two procedures being done to
release ERAB namely: ERAB release indication and the UE context release request:

MOBILITY KPI:

☰ Intra-Frequency Handover Out Success Rate


Intra-Frequency Handover Success Rate Our KPI shows intra-frequency handover success rate of locall cell or radio network to the intra-frequency neighboring
cell or radio network. Intra-frequency HO included in a single cell eNodeB or different eNodeB.
Intra-frequency HO scenario shown in the figure below:

No attempt HO calculations at point B. When ENodeB sending RRC connection reconfiguration message to the EU, he will do the handover. ENodeB will count
the number of times the HO attempt at the source cell. HO calculation of success is at point C. The HO ENodeB count the number of the source cell when
ENodeB receive RRC connection reconfiguration message complete of the EU.
Here's a scenario intra-frequency handovers inter ENodeB:

Interview Page 3
Handover attempt occurs at point B, when the source ENodeB (S-eNodeB) sends RRC connection reconfiguration message to the UE. He decided to conduct
inter ENodeB HO. in this KPI, the source and the target cell work on the same frequency. The number of the attempt HO calcula ted at the source cell. The
number of successful HO occurs at point C. During HO, HO amount which success is measured in the cell souce. This measurement appears typing S-eNodeB
received a UE context release message from the target eNode B (T-eNodeB), or the UE context release command from the MME, which shows that the UE-
eNodeB T has successfully attach at the T-eNodeB.
The following scenarios illustrate intra frequency B HO - inter ENodeB:

Following the definition of Intra Frequency Out Handover Success Rate KPI:

☰ Inter-RAT Handover Out Success Rate (LTE to WCDMA)


Inter RAT Handover Out Success rate shows the success rate KPI HO from LTE cell or radio network to a WCDMA cell.
Here's a scenario out inter RAT handover success rate:

Interview Page 4
Inter RAT handover success rate out

INTEGRITY KPI:

☰ E-UTRAN IP Throughput
A KPI that shows how E-UTRAN impacts the service quality provided to an end-user.
Payload data volume on IP level per elapsed time unit on the Uu interface. IP Throughput for a single QCI:

To achieve a throughput measurement that is independent of bursty traffic pattern, it is important to make sure that idle gap s between incoming data is not
included in the measurements. That shall be done as considering each burst of data as one sample. ThpVolDl is the volume on I P level and the ThpTimeDl is the
time elapsed on Uu for transmission of the volume included in ThpVolDl.

Interview Page 5
time elapsed on Uu for transmission of the volume included in ThpVolDl.

☰ E-UTRAN IP Latency
A measurement that shows how E-UTRAN impacts on the delay experienced by an end-user.
Time from reception of IP packet to transmission of first packet over the Uu.
To achieve a delay measurement that is independent of IP data block size only the first packet sent to Uu is measured.
To find the delay for a certain packet size the IP Throughput measure can be used together with IP Latency (after the first block on the Uu, the remaining time of
the packet can be calculated with the IP Throughput measure).

T_Lat is defined as the time between receiption of IP packet and the time when the eNodeB transmits the first block to Uu.
Since services can be mapped towards different kind of E-RABs, the Latency measure shall be available per QoS group.
AVAILABILITY KPI:

☰ E-UTRAN Cell Availability


E-UTRAN Cell Availability.
A KPI that shows Availability of E-UTRAN Cell.
Percentage of time that the cell is considered available.

As for defining the cell as available, it shall be considered available when the eNodeB can provide E-RAB service in the cell.
UTILIZATION KPI:

☰ Mean Active Dedicated EPS Bearer Utilization


This KPI describes the ratio of the mean number of active dedicated EPS bearer to the maximum number of active dedicated EPS bearers provided by EPC
network, and it is used to evaluate utilization performance of EPC network.
This KPI is obtained by the mean number of dedicated EPS bearers in active mode divided by the system capacity.

The mean number of simultaneous online and answered sessions together with maximum number of sessions provided by network can reflect system resource
utilization. If the value of this KPI is very high, it indicates system capacity is not enough, and needs to be increased. Th is KPI is focusing on network view.

From <https://telecom-knowledge.blogspot.com/2016/09/lte-kpi.html>

Interview Page 6

You might also like