LR24A-SR

Modulating rotary actuator for ball valves

• Nominal torque 5Nm
• Nominal voltage AC/DC 24V
• Control Modulating DC (0)2...10V
• Position feedback DC 2...10V

Technical data
Electrical data Nominal voltage AC/DC 24V
Nominal voltage frequency 50/60Hz
Nominal voltage range AC 19.2...28.8V / DC 19.2...28.8V
Power consumption in operation 1.5W
Power consumption in rest position 0.4W
Power consumption for wire sizing 3VA
Connection supply / control Cable 1m, 4 x 0.75mm²
Parallel operation Yes (note the performance data)
Functional data Torque motor Min. 5Nm
Positioning signal Y DC (0)2...10V
Positioning signal Y note Input impedance 100kΩ
Operating range Y DC 2...10V
Position feedback U DC 2...10V
Position feedback U note Max. 1mA
Position accuracy ±5%
Manual override Gear disengagement with push-button, can be
locked
Running time motor 90s / 90°
Sound power level motor max. 35dB(A)
Position indication Mechanically, pluggable
Safety Protection class IEC/EN III Safety extra-low voltage
Protection class UL UL Class 2 Supply
Degree of protection IEC/EN IP54
Degree of protection NEMA/UL NEMA 2, UL Enclosure Type 2
EMC CE according to 2004/108/EC
Certification IEC/EN IEC/EN 60730-1 and IEC/EN 60730-2-14
Mode of operation Type 1
Rated impulse voltage supply / control 0.8kV
Control pollution degree 3
Ambient temperature -30...50°C
Non-operating temperature -40...80°C
Ambient humidity 95% r.h., non-condensing
Maintenance Maintenance-free
Weight Weight Approx. 0.55kg

Safety notes
• This device has been designed for use in stationary heating, ventilation and air

! conditioning systems and is not allowed to be used outside the specified field of
application, especially in aircraft or in any other airborne means of transport.
• Only authorised specialists may carry out installation. All applicable legal or institutional
installation regulations must be complied during installation.
• The switch for changing the direction of rotation may only be operated by authorised
specialists. The direction of rotation must not in particular be reversed in a frost protection
circuit.
• The device may only be opened at the manufacturer‘s site. It does not contain any parts
that can be replaced or repaired by the user.
• The cables must not be removed from the device.
V8.3 04.2015• Subject to modification

• The device contains electrical and electronic components and is not allowed to be
disposed of as household refuse. All locally valid regulations and requirements must be
observed.

30 UL marked actuators is optional, please contact your local Sales Representative for details.
 Rotary actuator, Modulating, AC/DC 24V, 5Nm LR24A-SR

Product features
Mode of operation The actuator is connected with a standard modulating signal of DC (0)2...10V and travels to
the position defined by the positioning signal. Measuring voltage U serves for the electrical
display of the valve position 0...100% and as slave control signal for other actuators.
Simple direct mounting Straightforward direct mounting on the ball valve with only one central screw. The assembly
tool is integrated in the plug-in position indication. The mounting position in relation to the
ball valve can be selected in 90° steps.
Manual override Manual override with push-button possible (the gear is disengaged for as long as the button
is pressed or remains locked).
High functional reliability The actuator is overload protected, requires no limit switches and automatically stops when
the end stop is reached.
Adjustable angle of rotation Adjustable angle of rotation with mechanical end stops.

Accessories
Description Type
Electrical accessories Auxiliary switch, add-on, 1 x SPDT S1A
Auxiliary switch, add-on, 2 x SPDT S2A
Feedback potentiometer 140 Ohm, add-on P140A
Feedback potentiometer 200 Ohm, add-on P200A
Feedback potentiometer 500 Ohm, add-on P500A
Feedback potentiometer 1 kOhm, add-on P1000A
Feedback potentiometer 2.8 kOhm, add-on P2800A
Feedback potentiometer 5 kOhm, add-on P5000A
Feedback potentiometer 10 kOhm, add-on P10000A

Electrical installation
Notes • Connection via safety isolating transformer.
! • Parallel connection of other actuators possible. Observe the performance data.
• Direction of rotation switch is covered. Factory setting: Direction of rotation Y2.

Wiring diagrams

AC/DC 24V, modulating

T ~
– +

Y DC (0)2...10 V
U DC 2...10 V

1 2 3 5
Cable colours:
1 = black
Y1 2 = red
3 = white
Y2 5 = orange
V8.3 04.2015• Subject to modification

UL marked actuators is optional, please contact your local Sales Representative for details. 31
 LR24A-SR Rotary actuator, Modulating, AC/DC 24V, 5Nm

Electrical installation

Override control (frost protection circuit)

T ~
– +
Y DC (0)2...10 V
c d

1 2 3 5

Y1

Y2
Cable colours:
c d Y1 / Y2
1 = black
Y1 A – AB = 100%
2 = red
Y2 A – AB = 0% 3 = white
DC (0)2...10 V 5 = orange

Dimensions [mm]

Dimensional drawings 102

85
R 65

71

25 93 42
V8.3 04.2015• Subject to modification

32 UL marked actuators is optional, please contact your local Sales Representative for details.
 LR24A
Rotary actuator for ball valves
• Nominal torque 5Nm
• Nominal voltage AC/DC 24V
• Control Open-close, 3-point

Technical data
Electrical data Nominal voltage AC/DC 24V
Nominal voltage frequency 50/60Hz
Nominal voltage range AC 19.2...28.8V / DC 19.2...28.8V
Power consumption in operation 1.5W
Power consumption in rest position 0.2W
Power consumption for wire sizing 2VA
Connection supply / control Cable 1m, 3 x 0.75mm²
Parallel operation Yes (note the performance data)
Functional data Torque motor Min. 5Nm
Manual override Gear disengagement with push-button, can be
locked
Running time motor 90s / 90°
Sound power level motor max. 35 dB(A)
Position indication Mechanically, pluggable
Safety Protection class IEC/EN III Safety extra-low voltage
Protection class UL UL Class 2 Supply
Degree of protection IEC/EN IP54
Degree of protection NEMA/UL NEMA 2, UL Enclosure Type 2
EMC CE according to 2004/108/EC
Certification IEC/EN IEC/EN 60730-1 and IEC/EN 60730-2-14
Mode of operation Type 1
Rated impulse voltage supply / control 0.8kV
Control pollution degree 3
Ambient temperature -30...50°C
Non-operating temperature -40...80°C
Ambient humidity 95% r.h., non-condensing
Maintenance Maintenance-free
Weight Weight Approx. 0.55kg

Safety notes
• This device has been designed for use in stationary heating, ventilation and air
conditioning systems and is not allowed to be used outside the specified field of
! application, especially in aircraft or in any other airborne means of transport.
• Only authorised specialists may carry out installation. All applicable legal or institutional
installation regulations must be complied during installation.
• The switch for changing the direction of rotation may only be operated by authorised
specialists. The direction of rotation must not in particular be reversed in a frost protection
circuit.
• The device may only be opened at the manufacturer‘s site. It does not contain any parts
that can be replaced or repaired by the user.
• The cables must not be removed from the device.
• The device contains electrical and electronic components and is not allowed to be
disposed of as household refuse. All locally valid regulations and requirements must be
observed.
V8.3 04.2015• Subject to modification

UL marked actuators is optional, please contact your local Sales Representative for details. 33
 LR24A Rotary actuator, Open-close, 3-point, AC/DC 24V, 5Nm

Product features
Simple direct mounting Straightforward direct mounting on the ball valve with only one central screw. The assembly
tool is integrated in the plug-in position indication. The mounting position in relation to the
ball valve can be selected in 90° steps.
Manual override Manual override with push-button possible (the gear is disengaged for as long as the button
is pressed or remains locked).
High functional reliability The actuator is overload protected, requires no limit switches and automatically stops when
the end stop is reached.
Adjustable angle of rotation Adjustable angle of rotation with mechanical end stops.

Accessories
Description Type
Electrical accessories Auxiliary switch, add-on, 1 x SPDT S1A
Auxiliary switch, add-on, 2 x SPDT S2A
Feedback potentiometer 140 Ohm, add-on P140A
Feedback potentiometer 200 Ohm, add-on P200A
Feedback potentiometer 500 Ohm, add-on P500A
Feedback potentiometer 1 kOhm, add-on P1000A
Feedback potentiometer 2.8 kOhm, add-on P2800A
Feedback potentiometer 5 kOhm, add-on P5000A
Feedback potentiometer 10 kOhm, add-on P10000A

Electrical installation

Notes • Connection via safety isolating transformer.

! • Parallel connection of other actuators possible. Observe the performance data.
• Direction of rotation switch is covered. Factory setting: Direction of rotation Y2.

Wiring diagrams

AC/DC 24V, open-close AC/DC 24V, 3-point

T ~ T ~
– + – +

1 2 3 1 2 3

Y1 Y1

Y2 Y2 Y2 Y2 Y1
Cable colours: Cable colours:
1 = black 1 = black
Y2 2 = red Y2 2 = red
A – AB = 0% 3 = white A – AB = 0% 3 = white
V8.3 04.2015• Subject to modification

34 UL marked actuators is optional, please contact your local Sales Representative for details.
 Rotary actuator, Open-close, 3-point, AC/DC 24V, 5Nm LR24A

Dimensions [mm]
Dimensional drawings 102

85
R 65

71
25 93 42
V8.3 04.2015• Subject to modification

UL marked actuators is optional, please contact your local Sales Representative for details. 35
 LR24A-S
Rotary actuator for ball valves
• Nominal torque 5Nm
• Nominal voltage AC/DC 24V
• Control Open-close, 3-point
• With integrated auxiliary switch

Technical data
Electrical data Nominal voltage AC/DC 24V
Nominal voltage frequency 50/60Hz
Nominal voltage range AC 19.2...28.8V / DC 19.2...28.8V
Power consumption in operation 1.5W
Power consumption in rest position 0.2W
Power consumption for wire sizing 2VA
Auxiliary switch 1 x SPDT, 0...100%
Switching capacity auxiliary switch 1mA...3 (0.5) A, AC 250 V (II Protective
insulated)
Connection supply / control Cable 1m, 3 x 0.75mm²
Connection auxiliary switch Cable 1m, 3 x 0.75mm²
Parallel operation Yes (note the performance data)
Functional data Torque motor Min. 5Nm
Manual override Gear disengagement with push-button, can be
locked
Running time motor 90s / 90°
Sound power level motor max. 35dB(A)
Position indication Mechanically, pluggable
Safety Protection class IEC/EN III Safety extra-low voltage
Protection class UL UL Class 2 Supply
Degree of protection IEC/EN IP54
Degree of protection NEMA/UL NEMA 2, UL Enclosure Type 2
EMC CE according to 2004/108/EC
Low voltage directive CE according to 2006/95/EC
Certification IEC/EN IEC/EN 60730-1 and IEC/EN 60730-2-14
Mode of operation Type 1
Rated impulse voltage supply / control 0.8kV
Rated impulse voltage auxiliary switch 2.5kV
Control pollution degree 3
Ambient temperature -30...50°C
Non-operating temperature -40...80°C
Ambient humidity 95% r.h., non-condensing
Maintenance Maintenance-free
Weight Weight Approx. 0.6kg

Safety notes
• This device has been designed for use in stationary heating, ventilation and air
conditioning systems and is not allowed to be used outside the specified field of
! application, especially in aircraft or in any other airborne means of transport.
• Only authorised specialists may carry out installation. All applicable legal or institutional
installation regulations must be complied during installation.
• The switch for changing the direction of rotation may only be operated by authorised
specialists. The direction of rotation must not in particular be reversed in a frost protection
circuit.
• The device may only be opened at the manufacturer‘s site. It does not contain any parts
that can be replaced or repaired by the user.
• The cables must not be removed from the device.
V8.3 04.2015• Subject to modification

• The device contains electrical and electronic components and is not allowed to be
disposed of as household refuse. All locally valid regulations and requirements must be
observed.

36 UL marked actuators is optional, please contact your local Sales Representative for details.
 Rotary actuator, Open-close, 3-point, AC/DC 24V, 5Nm LR24A-S

Product features
Simple direct mounting Straightforward direct mounting on the ball valve with only one central screw. The assembly
tool is integrated in the plug-in position indication. The mounting position in relation to the
ball valve can be selected in 90° steps.
Manual override Manual override with push-button possible (the gear is disengaged for as long as the button
is pressed or remains locked).
High functional reliability The actuator is overload protected, requires no limit switches and automatically stops when
the end stop is reached.
Adjustable angle of rotation Adjustable angle of rotation with mechanical end stops.
Flexible signalization With adjustable auxiliary switch (0...100%)
Auxiliary switch
1 1
S1 S2 S3 S1 S2 S3

0 0

Accessories
Description Type
Electrical accessories Auxiliary switch, add-on, 1 x SPDT S1A
Auxiliary switch, add-on, 2 x SPDT S2A
Feedback potentiometer 140 Ohm, add-on P140A
Feedback potentiometer 200 Ohm, add-on P200A
Feedback potentiometer 500 Ohm, add-on P500A
Feedback potentiometer 1 kOhm, add-on P1000A
Feedback potentiometer 2.8 kOhm, add-on P2800A
Feedback potentiometer 5 kOhm, add-on P5000A
Feedback potentiometer 10 kOhm, add-on P10000A

Electrical installation

Notes • Connection via safety isolating transformer.

! • Parallel connection of other actuators possible. Observe the performance data.
• Direction of rotation switch is covered. Factory setting: Direction of rotation Y2.

Wiring diagrams

AC/DC 24V, open-close AC/DC 24V, 3-point

T ~ T ~
– +
– +

1 2 3 S1 S2 S3
1 2 3 S1 S2 S3
Cable colours: Cable colours:
Y1 1 = black Y1 1 = black
2 = red Y2 Y1 0 ... 100% 2 = red
Y2 Y2 0 ... 100% Y2
3 = white 3 = white
S1 = violet S1 = violet
Y2 S2 = red Y2 S2 = red
A – AB = 0% S3 = white A – AB = 0% S3 = white
V8.3 04.2015• Subject to modification

UL marked actuators is optional, please contact your local Sales Representative for details. 37
 LR24A-S Rotary actuator, Open-close, 3-point, AC/DC 24V, 5Nm

Dimensions [mm]
Dimensional drawings 102

85
R 65

71
25 93 42

V8.3 04.2015• Subject to modification

38 UL marked actuators is optional, please contact your local Sales Representative for details.
 LR230A
Rotary actuator for ball valves
• Nominal torque 5Nm
• Nominal voltage AC 230V
• Control Open-close, 3-point

Technical data
Electrical data Nominal voltage AC 230V
Nominal voltage frequency 50/60Hz
Nominal voltage range AC 85...265V
Power consumption in operation 2W
Power consumption in rest position 0.5W
Power consumption for wire sizing 4VA
Connection supply / control Cable 1m, 3 x 0.75mm²
Parallel operation Yes (note the performance data)
Functional data Torque motor Min. 5Nm
Manual override Gear disengagement with push-button, can be
locked
Running time motor 90s / 90°
Sound power level motor max. 35dB(A)
Position indication Mechanically, pluggable
Safety Protection class IEC/EN II Protective insulated
Protection class UL II Protective insulated
Degree of protection IEC/EN IP54
Degree of protection NEMA/UL NEMA 2, UL Enclosure Type 2
EMC CE according to 2004/108/EC
Low voltage directive CE according to 2006/95/EC
Certification IEC/EN IEC/EN 60730-1 and IEC/EN 60730-2-14
Mode of operation Type 1
Rated impulse voltage supply / control 4kV
Control pollution degree 3
Ambient temperature -30...50°C
Non-operating temperature -40...80°C
Ambient humidity 95% r.h., non-condensing
Maintenance Maintenance-free
Weight Weight Approx. 0.55kg

Safety notes
• This device has been designed for use in stationary heating, ventilation and air

! conditioning systems and is not allowed to be used outside the specified field of
application, especially in aircraft or in any other airborne means of transport.
• Caution: Power supply voltage!
• Only authorised specialists may carry out installation. All applicable legal or institutional
installation regulations must be complied during installation.
• The switch for changing the direction of rotation may only be operated by authorised
specialists. The direction of rotation must not in particular be reversed in a frost protection
circuit.
• The device may only be opened at the manufacturer‘s site. It does not contain any parts
that can be replaced or repaired by the user.
• The cables must not be removed from the device.
• The device contains electrical and electronic components and is not allowed to be
disposed of as household refuse. All locally valid regulations and requirements must be
observed.
V8.3 04.2015• Subject to modification

UL marked actuators is optional, please contact your local Sales Representative for details. 39
 LR230A Rotary actuator, Open-close, 3-point, AC230 V, 5Nm

Product features
Simple direct mounting Straightforward direct mounting on the ball valve with only one central screw. The assembly
tool is integrated in the plug-in position indication. The mounting position in relation to the
ball valve can be selected in 90° steps.
Manual override Manual override with push-button possible (the gear is disengaged for as long as the button
is pressed or remains locked).
High functional reliability The actuator is overload protected, requires no limit switches and automatically stops when
the end stop is reached.
Adjustable angle of rotation Adjustable angle of rotation with mechanical end stops.

Accessories
Description Type
Electrical accessories Auxiliary switch, add-on, 1 x SPDT S1A
Auxiliary switch, add-on, 2 x SPDT S2A
Feedback potentiometer 140 Ohm, add-on P140A
Feedback potentiometer 200 Ohm, add-on P200A
Feedback potentiometer 500 Ohm, add-on P500A
Feedback potentiometer 1 kOhm, add-on P1000A
Feedback potentiometer 2.8 kOhm, add-on P2800A
Feedback potentiometer 5 kOhm, add-on P5000A
Feedback potentiometer 10 kOhm, add-on P10000A

Electrical installation

Notes • Caution: Power supply voltage!

! • Parallel connection of other actuators possible. Observe the performance data.
• Direction of rotation switch is covered. Factory setting: Direction of rotation Y2.

Wiring diagrams

AC 230V, open-close AC 230V, 3-point

N L N L

1 2 3 1 2 3

Y1 Y1

Y2 Y2 Y2 Y2 Y1
Cable colours: Cable colours:
1 = blue 1 = blue
Y2 2 = brown Y2 2 = brown
A – AB = 0% 3 = white A – AB = 0% 3 = white V8.3 04.2015• Subject to modification

40 UL marked actuators is optional, please contact your local Sales Representative for details.
 Rotary actuator, Open-close, 3-point, AC 230V, 5Nm LR230A

Dimensions [mm]
Dimensional drawings 102

85
R 65

71
25 93 42
V8.3 04.2015• Subject to modification

UL marked actuators is optional, please contact your local Sales Representative for details. 41
 LR230A-S
Rotary actuator for ball valves
• Nominal torque 5Nm
• Nominal voltage AC 230V
• Control Open-close, 3-point
• With integrated auxiliary switch

Technical data
Electrical data Nominal voltage AC 230V
Nominal voltage frequency 50/60Hz
Nominal voltage range AC 85...265V
Power consumption in operation 2W
Power consumption in rest position 0.5W
Power consumption for wire sizing 4VA
Auxiliary switch 1 x SPDT, 0...100%
Switching capacity auxiliary switch 1mA...3 (0.5) A, AC 250V (II Protective
insulated)
Connection supply / control Cable 1m, 3 x 0.75mm²
Connection auxiliary switch Cable 1m, 3 x 0.75mm²
Parallel operation Yes (note the performance data)
Functional data Torque motor Min. 5Nm
Manual override Gear disengagement with push-button, can be
locked
Running time motor 90s / 90°
Sound power level motor max. 35dB(A)
Position indication Mechanically, pluggable
Safety Protection class IEC/EN II Protective insulated
Protection class UL II Protective insulated
Degree of protection IEC/EN IP54
Degree of protection NEMA/UL NEMA 2, UL Enclosure Type 2
EMC CE according to 2004/108/EC
Low voltage directive CE according to 2006/95/EC
Certification IEC/EN IEC/EN 60730-1 and IEC/EN 60730-2-14
Mode of operation Type 1
Rated impulse voltage supply / control 4kV
Rated impulse voltage auxiliary switch 2.5kV
Control pollution degree 3
Ambient temperature -30...50°C
Non-operating temperature -40...80°C
Ambient humidity 95% r.h., non-condensing
Maintenance Maintenance-free
Weight Weight Approx. 0.6kg

Safety notes
• This device has been designed for use in stationary heating, ventilation and air
conditioning systems and is not allowed to be used outside the specified field of
! application, especially in aircraft or in any other airborne means of transport.
• Caution: Power supply voltage!
• Only authorised specialists may carry out installation. All applicable legal or institutional
installation regulations must be complied during installation.
• The switch for changing the direction of rotation may only be operated by authorised
specialists. The direction of rotation must not in particular be reversed in a frost protection
circuit.
• The device may only be opened at the manufacturer‘s site. It does not contain any parts
that can be replaced or repaired by the user.
V8.3 04.2015• Subject to modification

• The cables must not be removed from the device.

• The device contains electrical and electronic components and is not allowed to be
disposed of as household refuse. All locally valid regulations and requirements must be
observed.

42 UL marked actuators is optional, please contact your local Sales Representative for details.
 Rotary actuator, Open-close, 3-point, AC 230V, 5Nm LR230A-S

Product features
Simple direct mounting Straightforward direct mounting on the ball valve with only one central screw. The assembly
tool is integrated in the plug-in position indication. The mounting position in relation to the
ball valve can be selected in 90° steps.
Manual override Manual override with push-button possible (the gear is disengaged for as long as the
button is pressed or remains locked).
High functional reliability The actuator is overload protected, requires no limit switches and automatically stops
when the end stop is reached.
Adjustable angle of rotation Adjustable angle of rotation with mechanical end stops.
Flexible signalization With adjustable auxiliary switch (0...100%)
Auxiliary switch
1 1
S1 S2 S3 S1 S2 S3

0 0

Accessories
Description Type
Electrical accessories Auxiliary switch, add-on, 1 x SPDT S1A
Auxiliary switch, add-on, 2 x SPDT S2A
Feedback potentiometer 140 Ohm, add-on P140A
Feedback potentiometer 200 Ohm, add-on P200A
Feedback potentiometer 500 Ohm, add-on P500A
Feedback potentiometer 1 kOhm, add-on P1000A
Feedback potentiometer 2.8 kOhm, add-on P2800A
Feedback potentiometer 5 kOhm, add-on P5000A
Feedback potentiometer 10 kOhm, add-on P10000A

Electrical installation

Notes • Caution: Power supply voltage!

! • Parallel connection of other actuators possible. Observe the performance data.
• Direction of rotation switch is covered. Factory setting: Direction of rotation Y2.

Wiring diagrams

AC 230V, open-close AC 230V, 3-point

T ~ T ~
– + – +

1 2 3 S1 S2 S3 1 2 3 S1 S2 S3
Cable colours: Cable colours:
1 = blue Y1
1 = blue
Y1
2 = brown Y2 Y1 0 ... 100% 2 = brown
Y2 0 ... 100% Y2
3 = white
Y2 3 = white
S1 = violet S1 = violet
Y2 S2 = red Y2 S2 = red
A – AB = 0% S3 = white A – AB = 0% S3 = white
V8.3 04.2015• Subject to modification

UL marked actuators is optional, please contact your local Sales Representative for details. 43
 LR230A-S Rotary actuator, Open-close, 3-point, AC 230V, 5Nm

Dimensions [mm]

Dimensional drawings 102

85
R 65

71
25 93 42

V8.3 04.2015• Subject to modification

44 UL marked actuators is optional, please contact your local Sales Representative for details.