Scribd
Upload
260 views3 pages

Nvent LENTON Nvent LENTON Connect S2 Series Shear Bolt Coupler Plain

The document provides specifications for the nVent Lenton Connect S2 Series shear bolt coupler. The coupler requires no special bar end preparation, installs quickly using hand tools, and has bolt heads that shear off for simple inspection. It is designed to work as a transition/reducer and complies with ACI 318 standards. Specifications include available sizes, lengths, number of bolts, torque requirements, and material. Diagrams and warnings are also provided.

Uploaded by

regedra
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
260 views3 pages

Nvent LENTON Nvent LENTON Connect S2 Series Shear Bolt Coupler Plain

The document provides specifications for the nVent Lenton Connect S2 Series shear bolt coupler. The coupler requires no special bar end preparation, installs quickly using hand tools, and has bolt heads that shear off for simple inspection. It is designed to work as a transition/reducer and complies with ACI 318 standards. Specifications include available sizes, lengths, number of bolts, torque requirements, and material. Diagrams and warnings are also provided.

Uploaded by

regedra
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

NVENT LENTON CONNECT S2 SERIES SHEAR BOLT COUPLER, PLAIN

CERTIFICATIONS

FEATURES
Requires no special bar end preparation such as sawing

Installs quickly and easily using simple, off-the-shelf hand tools

Bolt heads shear off when bolt torque is achieved, providing for simple visual inspection

Designed to work as a one-step transition/reducer

Rebar centering pin can be removed to allow the coupler to fully pass onto the reinforcing bar for applications such as closure
pours

Complies to ACI 318 Type 1 and Type 2 performance on ASTM A706 grade 60 reinforcing bar

Complies to ACI 318 Type 1 performance on ASTM A615 grade 60 reinforcing bar

Complies to ACI 318-19 Type 2 performance on ASTM A615 grade 60 reinforcing bar

SPECIFICATIONS

Finish: Plain
Material: Steel
100% U.S. Domestic Content: Yes

Table 1/2
Catalog Rebar Size, Rebar Size, Length 1 Length 2 Socket
Diameter (Ø)
Number US Canada (L1) (L2) Width (SW)
LC16S2D 4 10 1.63" 3 1/2" 1.7" 1/2

LC20S2D 6 20 1.9" 5.1" 2 1/2" 1/2

LC22S2D 7 2" 6.9" 3.4" 1/2

LC25S2D 8 25 2.38" 8.7" 4.3" 5/8

LC28S2D 9 30 2.8" 8.7" 4.3" 3/4

LC32S2D 10 3" 11.2" 5.4" 3/4

LC36S2D 11 35 3.13" 13.7" 6.7" 3/4

Table 2/2
Catalog Number Number of Bolts Torque (TQ) Unit Weight

LC16S2D 4 85'·lbf 1.5 lb

LC20S2D 6 85'·lbf 2.7 lb

LC22S2D 8 85'·lbf 3.9 lb

LC25S2D 8 193'·lbf 7.6 lb

LC28S2D 6 440'·lbf 10.8 lb

LC32S2D 8 440'·lbf 15.2 lb

LC36S2D 10 440'·lbf 19.6 lb

ADDITIONAL PRODUCT DETAILS

Bolt length may vary after the bolt heads are sheared off. Bolt heads are not required to be removed as long as the appropriate
bolt torque is achieved.

Refer to complete installation instructions provided with the product or available at erico.com prior to commencing installation.

See instructions for installation equipment recommendations.

DIAGRAMS

WARNING
nVent products shall be installed and used only as indicated in nVent's product instruction sheets and training materials.
Instruction sheets are available at www.nvent.com and from your nVent customer service representative. Improper installation,
misuse, misapplication or other failure to completely follow nVent's instructions and warnings may cause product malfunction,
property damage, serious bodily injury and death and/or void your warranty.

2
North America Europe Europe APAC
+1.800.753.9221 Netherlands: Germany: Shanghai:
Option 1 – Customer Care +31 800-0200135 800 1890272 + 86 21 2412 1618/19
Option 2 – Technical Support France: Other Countries: Sydney:
+33 800 901 793 +31 13 5835404 +61 2 9751 8500

Our powerful portfolio of brands:


nVent.com CADDY ERICO HOFFMAN RAYCHEM SCHROFF
TRACER
© 2024 nVent. All nVent marks and logos are owned or licensed by nVent Services GmbH or its affiliates. All other trademarks are the property of 3
their respective owners.
nVent reserves the right to change specifications without notice.

You might also like