Scribd
Upload
73 views1 page

Borron A Pin Glo en

BORRON® A is an anionic and biodegradable wetting and dispersing agent that is compatible with enzymatic products. It has excellent wetting, dispersing, and emulsifying properties that improve cleanliness when liming and soaking hides. BORRON® A also prevents fat from settling and improves emulsion persistence. It works synergistically with non-ionic surfactants and enzymatic soaking agents. The required dosage depends on several factors and typically ranges from 0.1-0.6% for soaking and 0.3-0.6% for liming.

Uploaded by

Vânia Queiroz
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
73 views1 page

Borron A Pin Glo en

BORRON® A is an anionic and biodegradable wetting and dispersing agent that is compatible with enzymatic products. It has excellent wetting, dispersing, and emulsifying properties that improve cleanliness when liming and soaking hides. BORRON® A also prevents fat from settling and improves emulsion persistence. It works synergistically with non-ionic surfactants and enzymatic soaking agents. The required dosage depends on several factors and typically ranges from 0.1-0.6% for soaking and 0.3-0.6% for liming.

Uploaded by

Vânia Queiroz
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Product Information

Wet-End

BORRON® A - Wetting and dispersing agent Edition 2019

Features BORRON® A is anionic, biodegradable and is compatible with enzymatic


products.

Handling:
Wear goggles and gloves during handling and close containers tightly after use.

Storage stability:
Can be stored for about 2 years if protected from frost (0°C) and heat above
40°C.

Benefits BORRON® A has excellent wetting, dispersing and emulsifying properties.

BORRON® A imparts outstanding degreasing and enhances the cleanliness of


the hides. In combination with non-ionic surfactants it has a positive, synergistic
effect (e.g. BORRON® DNC).

BORRON® A improves the emulsion persistence thus prevents the fat from
settling on the surfaces of the processing vessel and hides or skins.

BORRON® A improves the cleanness of pelts if used in the liming process.

BORRON® A has a positive and synergistic effect on degreasing in combination


with enzymatic soaking agents such as PELLVIT®.

Application The required dosage for BORRON® A depends on the raw stock, treatment step
and preservation type of the pelt as well as on the type of leather to be
produced.

Quantities to be used:
Soaking: 0.1 - 0.6 % based on salted weight
Liming: 0.3 - 0.6 % based on salted weight

Trade form at 20°C clear to opalescent liquid

Colour at 20°C colourless to yellow

Dry content (%) 28,5 – 31,5

pH – value (tel quel) 6,0 – 8,0

This information is for guidance only.


A Product Specification is available on request.

1
Regarding toxicological and ecological data see the safety data sheet of above product.

BORRON® is a registered or filed trademark owned by or licensed to TFL in most countries.

Our application recommendations are in line with our present state of knowledge. They do not, however, exempt the customer from performing his
own tests to determine the suitability of the supplied products for their intended purposes. Application of the products lies outside the scope of our
control and therefore comes within the customer’s sphere of responsibility. We guarantee the satisfactory quality of our products subject to
general terms of sale and delivery.

You might also like