Additional Resources: Product Page
date 04/06/2023
page 1 of 6
MODEL: CMM-2718AB-38162W-TR | DESCRIPTION: MEMS MICROPHONE
FEATURES
• bottom port
• analog
• omnidirectional
• frequency response range (20 Hz-20 kHz)
ELECTRICAL
parameter conditions/description min typ max units
directivity omnidirectional
sensitivity (S) at 1 V/Pa, 1 kHz -39 -38 -37 dB
supply voltage (VDD) 1.5 3.6 V
current consumption (IDSS) 150 170 µA
sensitivity reduction no change across the voltage range dB
frequency (f) 20 20,000 Hz
signal to noise ratio (S/N) 20 kHz bandwidth, A-weighted 62 dBA
total harmonic distortion (THD) at 94 dB SPL, 1 kHz, Rload > 2 k 0.1 %
acoustic overload point (AOP) at 10% THD, 1 kHz, Rload > 2 k 123 dB SPL
output impedance (Zout) at 1 kHz 200 Ω
dc output 0.7 V
PSRR 200 mVp-p sine wave @ 1 kHz, VDD = 1.8 V 70 dB
PSR 100 mVp-p square wave @ 217 Hz, VDD = 1.8 V -100 dBV(A)
Notes: 1. All specifications measured at 25°C, humidity at 45±5%, unless otherwise noted.
ENVIRONMENTAL
parameter conditions/description min typ max units
operating temperature -20 70 °C
storage temperature in packaging -40 100 °C
RoHS yes
MECHANICAL
parameter conditions/description min typ max units
dimensions 2.75 x 1.85 x 0.90 mm
acoustic port bottom
terminals surface mount
weight 0.03 g
cuidevices.com
Additional Resources: Product Page
CUI DEVICES | MODEL: CMM-2718AB-38162W-TR | DESCRIPTION: MEMS MICROPHONE date 04/06/2023 | page 2 of 6
MECHANICAL DRAWING
units: mm
tolerance:
length, width, height: ±0.10 mm
acoustic port: ±0.05mm
unless otherwise specified: ±0.15 mm
TERMINAL CONNECTIONS
TERM. FUNCTION
1 VDD
2 output
3 GND
Recommended PCB Layout Recommended Stencil Layout
Top View Top View
INTERFACE CIRCUIT
Note: 2. It is recommended that the components on the left side of red line be placed close to MIC, and components on the right side of red line be placed close to CODEC.
cuidevices.com
Additional Resources: Product Page
CUI DEVICES | MODEL: CMM-2718AB-38162W-TR | DESCRIPTION: MEMS MICROPHONE date 04/06/2023 | page 3 of 6
FREQUENCY RESPONSE CURVE
at 20 Hz - 10 kHz
at 20 Hz - 20 kHz
PHASE
20~50 Hz 50~100 Hz 100 Hz~3 kHz 3~10 kHz
Max +5° +4° +2° +5°
Min -5° -4° -2° -5°
cuidevices.com
Additional Resources: Product Page
CUI DEVICES | MODEL: CMM-2718AB-38162W-TR | DESCRIPTION: MEMS MICROPHONE date 04/06/2023 | page 4 of 6
SOLDERABILITY
parameter conditions/description min typ max units
reflow soldering3 see reflow profile 260 °C
Note: 3. Not recommended to exceed 3 reflow cycles.
20~40 s
260
3°C/s max ramp up
6°C/s max ramp down
Temperature (°C)
217
60~150 s
200
150
60~180 s
25
480 s max
Time (sec)
HANDLING RECOMMENDATIONS
1. Not recommended to blow air heavily over acoustic port as debris could impact mic function.
2. Not suitable for wash process after reflow.
3. Not recommended to brush board with or without solvents after reflow process.
4. Not recommended to directly expose to ultrasonic processing or cleaning.
5. Not recommended to inserty any object in port of device at any time.
6. Not recommended to apply over 30 psi of air pressure into the port hole.
7. Not recommended to pull a vacuum over port hole.
8. Not recommended to apply a vacuum when repackaging into sealed bag a rate faster than 0.5 atm/sec.
9. Not recommended to clean table or carried plate with air guarding system that could induce particle floating inside mic.
Recommended Vacuum Nozzle Pickup
Top View
cuidevices.com
Additional Resources: Product Page
CUI DEVICES | MODEL: CMM-2718AB-38162W-TR | DESCRIPTION: MEMS MICROPHONE date 04/06/2023 | page 5 of 6
PACKAGING
parameter conditions/description min typ max units
MSL Class 1
reel size Ø7 inches
reel QTY4 1,100 pcs per reel
carton size 310 x 210 x 165 mm
carton QTY 5,500 pcs
Note: 4. The leader tape of the reel, and the beginning tape fixed into the reel center, will leave 25 blank cavities each.
Item W E F ØD0 K0
DIM(mm) 12.0±0.30 1.75±0.10 5.50±0.10 1.50+0.10/-0 1.15±0.10
Item P0 10P0 P1 A0 B0
DIM(mm) 4.0±0.10 40.0±0.20 8.0±0.10 3.05±0.10 2.15±0.10
Item P2 T -- -- --
DIM(mm) 2.0±0.10 0.25±0.05 -- -- --
Carton Box
(5Reel)
cuidevices.com
Additional Resources: Product Page
CUI DEVICES | MODEL: CMM-2718AB-38162W-TR | DESCRIPTION: MEMS MICROPHONE date 04/06/2023 | page 6 of 6
REVISION HISTORY
rev. description date
1.0 initial release 04/06/2023
The revision history provided is for informational purposes only and is believed to be accurate.
CUI Devices offers a one (1) year limited warranty. Complete warranty information is listed on our website.
CUI Devices reserves the right to make changes to the product at any time without notice. Information provided by CUI Devices is believed to be accurate
and reliable. However, no responsibility is assumed by CUI Devices for its use, nor for any infringements of patents or other rights of third parties which may
result from its use.
CUI Devices products are not authorized or warranted for use as critical components in equipment that requires an extremely high level of reliability. A
critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life
support device or system, or to affect its safety or effectiveness.
cuidevices.com
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
CUI Devices:
CMM-2718AB-38162W-TR
