{i Gate|Edge Pro RAK7289 User ManualInstructions for use and mele) Pare Red M Oem Uae Re WRU Keele nme your product. The complete documentation and further information about your product can be found in the RAKwireless Documentation Center: eee ts ee Reece a merc eoyA CECE RTC Product Description WisGate Edge is RAKwireless flagship line of commercial-grade gateways. Customizable in terms of the backhaul connectivity options, antenna type, and power provisioning. WisGate Edge Pro is an ideal product for loT commercial deployment. With its industrial-grade components, it achieves a high standard of reliability. Supports up to 16 LoRa channels, multi-backhaul with Ethernet, Wi-Fi, and Cellular connectivity. Optionally there is a dedicated port for different power options, solar panels, and batteries. With its new enclosure design, it allows the LTE, Wi-Fi, and GPS antennas to be inside the enclosure. The gateway provides a solid out-of-the-box experience for quick deployment.Product Features + Full LoRaWAN Stack support in Built-In Server mode + Supports 2.4 G Wi-Fi AP for configuration + 100M Base-T Ethernet with PoE + Power supply - PoE (IEEE 8023 af), 37-57 VDC ~12V/1A - Support RAK Battery Plus + Ingress protection IP67 + Enclosure material — Aluminum and plastic + Operating temperatures -30 °C to +55 °C + Installation method Pole or wall mounting + Multi back-haul with Ethernet and Wi-Fi + Cellular LTE Cat 4 network (optional, available with C versions) + BLE connectivity (optional, available with H versions) + Can integrate with both private (e.g. Chirp Stack) and public (e.g. TTN) network servers + SD card for system logs backup + Built-in Network Server for easy deployment of applications and integration of gateways Manufacturers Address Shenzhen RAKwireless Technology Co.,Ltd. Room 506, Bidg B, New Compark, Pingshan First Road, Taoyuan Street, XiLi Town Nanshan District, Shenzhen, ChinaVariety of the Product Series + Main model: RAK7289XXX + Sub-models: Terr Nee Cc With Cellular connectivity v2 With WisGateOS 2 H With a Bluetooth Packing List 1x Device & > 1x 12V Cable Se 1x Installation Bracket 1x Power adapter 1x Cable gland Teac crn cPaaelaet ae ac 1x Installation guide 1x Power cordInterfaces and Connectors The gateway's interfaces and connectors are illustrated below: LO Poin () Tima TneRAK7289 LEDs status [ECC ei Power On Device power on Off Device power off ETH On Link up off Link down Flash Data Transmitting and Receiving ToRat | On LoRat is working Of LoRat is not working Flash Indicate that LoRat Packet Transmitting and Receiving LoRa2 | On LoRa2 is working Off LoRa2 is not working Peete Flash Indicate that LoRa2 Packet Transmitting and Receivin +The SD card and the wan 6 a = a n is workin SMmercteshs larval s)storas (Pho a res Always turn of WiFidseble TE SUENS y' Flash Data Transmitting and Receiving UREN acs 5 WLAN ‘Slow Flash (1Hz) - Connection Disconnected Noam CCT ratios On Connection Successful SIM or SD card. Flash Data Receiving and Sending Beas a LTE ‘Slow Flash 1 (200me Bright/1B00me Dark [erm ENA ay Unregistered network Come WCU es qvetork’seerohing) Rete ce nT Slow Flash 2 | _ 200m=uasteoom bulayceimegotno Idle status (Online) fees Quick Flash | Data Transmitting and ReceivingInstallation Step 1: Fix the device bracket on the bottom of the enclosure with four M612 screws following the direction shown in the figure below. Step 2: Tighten the pole clamp bar with bolts, washer, and nuts. Note: The diameter of a pole that brackets support is 50100mm. If the pole diameter is more than this value, the steel strips can be used, Standard delivery without steel strip and the user should purchase separately.Installation Step 3: Hang up the device and fasten it with two M612 Screws. Connecting Power over Ethernet Step 1: Connect the other end of the Ethernet cable from the enclosure to the Ethernet port labeled POE on the adapter. Step 2: Connect an Ethernet cable from your LAN to the Ethernet port labeled LAN on the adapter. @ Step 3: Connect the Power Cord to the power port on the adapter. Connect the other end of the Power Cord to a power outlet.Weather Protection Tape sealed antenna and cable connections: Clean the surface area of the connector that will be wrapped. Wrap a layer of PVC tape with a 50% overlap according to the rotation direction of the connector. Continue wrapping the PVC tape to about 10 mm below the end of the connector. Step 1: To better protect the Ethernet cable gland and the antenna connector from the weather, you need to cover them with PVC tape.Weather Protection Step 2: Cut off about 50 cm waterproof tape, Stretch it to double the length. Wrap three layers around the connector with a 50% overlap. Hold the tape in place with your hand for a few seconds Step 3: Wrap three additional layers with PVC tape with natural uncoiling force and a 50% overlap. Make sure to cover the head and the tail of the connector.Accessing the Gateway WI-FI AP MODE By default, the Gateway will work in Wi-Fi AP Mode which means that you can find an SSID named RAK7289_XXXX on your PC's Wi-Fi Network List. XXXX is the last two bytes of the Gateway MAC address. Using your preferred Web browser, access the gateway on the IP address shown below: Browser Address: 192.168.2301 Username: root Password: root WAN Port (Ethernet) Connect the Ethernet cable to the port marked “ETH” on the Gateway and the other end to the PoE port of the PoE injector. Connect the LAN port of the PoE injector to your PC. The default IP is 169.254.X.X. The last two segments(X.X) are mapped from the last four bits of the MAC address of your gateway. For example, the last four bits of the MAC address are OF:01, and the IP address is 169,254.51. Make sure to manually set the address of your PC to one in the same network (for example 169.25415.100). Use the same credentials for the Web Ul as. for AP mode. Detailed Quick Start Guides for the devices are available in the RAKwireless Documentation Center: https://docs.rakwireless.com/Product-Categories/WisGate/ RAK7289/OverviewV. Cert Operating frequency range: ation Information aco ty Frequency band [MHz] ae LoRa 863-865, 865-868, 868-868. Pa 8694-86965 27 BLE 2402-2480 10 WLAN 80211 b/a/n 2400-24835 20 GSM 900 880-915(TX), 925-960(RX) 33 GSM 1800 1710-1785(TX), 1805-1880(RX) 30 WCDMA Band | 1920-4980(TX), 2110-2170(RX) 24 WCDMA Band VIII 880-915(TX), 925-960(RX) 24 LTE Band 1 1920-1980(TX), 2110-2170(RX) 23 Band 3 1710-1785(TX), 1805-1880(RX) 23 Band 7 2500-2570(TX), 2620-2690(RX) 25) Band 8 880-915(TX), 925-960(RX) 23 Band 20 832-862(TX), 791-821(RX) 2 Band 280 703-733(TX), 758-788(RX) sl “44.Simplified EU Declaration of Conformity Hereby, Shenzhen RAKwireless Technology Co.,Ltd, declares that the radio equipment type RAK7289/RAK7289V2/ RAK7289V2H is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: https://downloads.rakwireless.com/LoRa/RAK7289/Certification/RAK7289%20%2 OCE%20DOC,paf The radio equipment type RAK7289C/RAK7289CV2/ RAK7289CV2H is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: https://downloads.rakwireless.com/LoRa/RAK7289/Certification/RAK7289C%20% 20CE%20DOC.pdf Economic operators for EU eee er Alinet Maistr. 2, Munich 82110 Germering, Germany Marcom SRL (marcomweb) | Via deta Metatturgia 11,7189 Verona, Italy | Arduino SRL Via Andrea Appiani 25, 20900 Monza MB Italy | Economic operators for UK cet T ie po Metavurt Ltd 1st Floor Tuspark Newcastle 27 Grainger Street NE1 5JE Newcastle upon Tyne UKps Correct Disposal of this product — This marking indicates that this product should not be disposed of with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmentally safe recycling. FCC Compliance This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Caution Changes or modifications not expressly approved by the part responsible for compliance could void the user's authority to operate the equipment. -13-FCC Caution This equipment has been tested and found to comply with the limits for a Class B digital device, according to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used following the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. FCC RF Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 30cm between the radiator and any part of your body for RAK7289/ RAK7289V2/ RAK7289V2H, and 40cm for RAK7289C/ RAK7289CV2/ RAK7289CV2H.ISED Certification IS E D This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions: 1. This device may not cause interference 2. This device must accept any interference, including interference that may cause undesired operation of the device. Lémetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d'Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : 4. Lappareil ne doit pas produire de brouillag: 2. Lappareil doit accepter tout brouillage radioélectrique subi, méme si le brouillage est susceptible den compromettre le fonctionnement. -15-ISED Certification IS E D The device complies with RF exposure guidelines, users can obtain Canadian information on RF exposure and compliance. The minimum distance from the body to use the device is 30 cm for RAK7289/ RAK7289V2/ RAK7289V2H, and 40 cm for RAK7289C/ RAK7289CV2/ RAK7289CV2H. Le présent appareil est conforme Aprés examen de ce matériel aux conformité ou aux limites d’intensité de champ RF, les utilisateurs peuvent sur exposition aux radiofréquences et la conformité and compliance d’acquérir les informations correspondantes. La distance minimale du corps pour utiliser l'appareil est de 30 cm pour RAK7289/ RAK7289V2/ RAK7289V2H, et de 40 cm pour RAK7289C/ RAK7289CV2/ RAK7289CV2H. The device must be installed by a trained professional (training in RF Exposure) to ensure that the device is installed correctly with all safeguards in place. L'appareil doit étre installé par un professionnel qualifié (formation en exposition RF) pour s'assurer que l'appareil est installé correctement avec toutes les protections en place. -16-Z. ® | RAKwireless ve) RAK Technology Co,, Lid Room 506, Building B, New Compark, Pingshan First Road, Taoyuan Street, Nanshan District, Shenzhen, Guangdong, China a news. store. W @RAKwireless © www.RAKwireless.com docs. © forum.