Scribd
Upload
16 views3 pages

Exercices DSV

This document contains examples and exercises related to dynamics and vibration for single-degree-of-freedom and multi-degree-of-freedom systems. It includes examples of equivalent stiffness calculations, modeling a car suspension element, modeling a simple pendulum, analyzing vibration transmissibility, damping from friction, natural frequencies and mode shapes for 2-DOF and 4-DOF systems, and using a dynamic vibration absorber. The goal of the exercises is to help understand vibration characteristics and modeling of basic mechanical systems.

Uploaded by

saida
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
16 views3 pages

Exercices DSV

This document contains examples and exercises related to dynamics and vibration for single-degree-of-freedom and multi-degree-of-freedom systems. It includes examples of equivalent stiffness calculations, modeling a car suspension element, modeling a simple pendulum, analyzing vibration transmissibility, damping from friction, natural frequencies and mode shapes for 2-DOF and 4-DOF systems, and using a dynamic vibration absorber. The goal of the exercises is to help understand vibration characteristics and modeling of basic mechanical systems.

Uploaded by

saida
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

DYNAMICS AND VIBRATION

EXAMPLES: Single degree of freedom system

Exercise 1: Equivalent stiffness

Determine the equivalent stiffness of 2 springs:

a) Parallel combination b) Serial combination

Exercise 2: Part of car suspension

A car suspension element is subjected to laboratory tests. In static conditions, the weight of a mass M
generates an elongation δ. The measurement of free oscillations leads to a measurement of the
frequency f1.

Calculate the characteristics of the element of suspension k and c.

M=350 kg, δ=0.28m, f1=0.835Hz

Exercise 3: Pendulum

Consider the simple pendulum of a relatively


massive object hung by a string from a fixed
support. The string has a fixed length l and no 𝑔
mass.
Determine the equation of motion by using:
- Newton’s law
- Lagrange’s equation

Application: Which would have the highest frequency of vibration?


Pendulum A: A 200-g mass attached to a 1.0-m length string
Pendulum B: A 400-g mass attached to a 0.5-m length string

Exercise 4: Single degree of freedom system

We consider the single degree of freedom system with motion of the foundation

Supposing that 𝑘 = 𝑘0 (1 + 𝑗𝜉) where 𝜉 is the loss factor in the case of hysteretic damping
𝑋
By using the complex notation, determine the motion transmissibility 𝑇 = | |
𝑈

Application: Make recommendations for the choice of the stiffness of each of the 4 neoprene anti-
vibration mounts (assumption of hysteretic damping with a loss factor of 0.1) used to isolate a
microelectronic machine from vibrations on the ground. The amplitude of the vibrations of the
machine must be less than 1 µm. The measurement of the vibrations of the ground with an
accelerometer gave a high level at the first natural frequency of the slab: 0.1 m / s² at 10Hz. The
machine has a mass of 100 kg.

Exercise 5: Damping by friction

Calculate the displacement of an undamped single degree-of-freedom system with dry friction with
the foundation.
The friction force is written:
−µ𝑁 ; 𝑥̇ > 0
𝐹𝑑 (𝑥̇ ) = { 0
µ𝑁 ; 𝑥̇ < 0
Application: Determine the friction coefficient considering that the amplitude of vibration of a mass (1
kg) is 30 mm at the initial time and 3.5 mm at the final time. The duration of the movement is 4 periods
with a total time of 1 second.

EXAMPLES: Two degree of freedom system

Exercise 6: Simple two degree of freedom system

By supposing 𝑚1 = 𝑚2 = 𝑚 :
- Determine the natural frequencies and the mode
shapes of the system shown.
- Determine the modal mass matrix and the modal
stiffness matrix.
- Determine the amplitudes of 𝑚1 and 𝑚2 in free
vibrations (considering that the following initial
conditions 𝑥1 (0) = 𝑥0 , 𝑥2 (0) = 0, 𝑥1̇ (0) =
0, 𝑥2̇ (0) = 0)
- Determine the amplitudes of 𝑚1 and 𝑚2 in
forced vibrations (permanent regime)

Exercise 7: Coupling by mass

We consider the system shown corresponding


to a simplified model of car. The bar has a
mass m and an inertia I around G.

Determine the natural frequencies for the


conservative system and the mode shapes.
Exercise 8: Dynamic vibration absorber

1. Consider the primary system shown, which is a model of


a single DOF vibrating structure, acted upon by a
harmonic force. Determine and plot the vibration
amplitude of the mass 𝑚1 according to the exciting
frequency 𝜔.

We can choose : 𝑘1 = 1 𝑁/𝑚 and 𝑚1 = 1 𝑘𝑔 for the


plotting

2. Now, we suppose that the exciting frequency 𝜔 is


constant and is equal to the natural frequency of the
system. We add a secondary system, consisting of a mass
𝑚2 and spring 𝑘2 as shown. Show that the system helps
to reduce vibration at the exciting frequency.

The system is called tuned dynamic absorber.

EXAMPLES: N degrees of freedom system

Exercise 9: 4 degrees of freedom system

Determine the natural frequencies of the 4 degrees of freedom system.

You might also like