Scribd
Upload
79 views2 pages

Ultrasonic Sensor Specs & Features

Ultrasonic sensors use ultrasonic sound waves to measure distances to targets. The document provides specifications for a particular ultrasonic sensor model including its scanning range of 100-1000 mm, resolution of less than 0.3 mm, response time of less than 80 ms, operating temperature range of -25 to 65 degrees Celsius, and IP67 rating. The sensor outputs either a 4-20 mA current or 0-10 V voltage depending on distance to the target and has automatic polarity protection and short circuit protection.

Uploaded by

Basadi Ztm
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
79 views2 pages

Ultrasonic Sensor Specs & Features

Ultrasonic sensors use ultrasonic sound waves to measure distances to targets. The document provides specifications for a particular ultrasonic sensor model including its scanning range of 100-1000 mm, resolution of less than 0.3 mm, response time of less than 80 ms, operating temperature range of -25 to 65 degrees Celsius, and IP67 rating. The sensor outputs either a 4-20 mA current or 0-10 V voltage depending on distance to the target and has automatic polarity protection and short circuit protection.

Uploaded by

Basadi Ztm
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Ultrasonic sensors

Ultrasonic distance measuring U500.DA0-11127346


sensors
dimension drawing

18 4,3 LED

2
5 5
Teach-in
45,1

25

15
70

4,1

12
32,2

general data photo


scanning range Sd 100 ... 1000 mm
scanning range close limit Sdc 100 ... 1000 mm
scanning range far limit Sde 100 ... 1000 mm
repeat accuracy < 0,5 mm
resolution < 0,3 mm
response time ton < 80 ms
release time toff < 80 ms
temperature drift < 2 % of distance to target So
power-up drift compensated after 15 min.
sonic frequency 220 kHz
adjustment qTeach
alignment aid light indicator flashing
light indicator LED yellow
power on indication LED green
alignment measuring axis < 2° connection diagram

BN (1) +Vs
electrical data WH (2) Teach-in
voltage supply range +Vs 12 ... 30 VDC Analog BK (4) analog
current consumption typ. 38 mA Z
BU (3) 0V
output circuit voltage - / current output
output signal 4 ... 20 mA / 0 ... 10 VDC
residual ripple < 10 % Vs
short circuit protection yes
reverse polarity protection yes, Vs to GND

The sensor recognizes automatically


mechanical data whether it should deliver a current or a
voltage output.
type rectangular
housing material plastic (ASA, PMMA)
width / diameter 18 mm
height / length 45 mm
depth 32 mm
connection types cable PUR 4 x 0,25, 2 m

U500.DA0-AA1B.72CU www.baumer.com 21/11/2018


Ultrasonic sensors

Ultrasonic distance measuring U500.DA0-11127346


sensors
ambient conditions
operating temperature -25 ... +65 °C (+60 °C current mode)
storage temperature -40 ... +75 °C
protection class IP 67

typical sonic cone profile

120

100

80
lateral distance to reference axis (mm)

60

40

20

-20

-40

-60

-80

-100
sensing limit
-120
0 100 200 300 400 500 600 700 800 900 1000 1100 1200
object distance (So) from sensor front (mm)
standard target with 30 x 30 mm, directed rectangular to sensor's reference axis

U500.DA0-AA1B.72CU www.baumer.com 21/11/2018

You might also like