MD200-NC AC Drive

Open loop, general purpose, compact drive

Features & functions NEW

Wide operating voltage
Single-phase 200 to 240 Vac
■ Open loop V/F & sensorless vector control 0.4 to 2.2 kW
Three-phase 380 to 480 Vac
■ Starting torque 150% at 3 Hz in SVC mode 0.4 to 3.7 kW

E467465
■ Selectable digital inputs:
IND.CONT.EQ
SINK (NPN)/SOURCE (PNP) selectable

■ Automatic torque boost NEW

Internal EMC filter (category C3)*1
■ Slip compensation
Complies with EN61800-3
■ Easy start-up with simplified parameters category C2
2nd environment
■ 2 independent S-ramps (with external EMC filter)

■ Flexible programmable I/Os

■ Variable DC injection braking

■ Comprehensive diagnostics
Operation in high ambient
temperatures 50℃
■ Output frequency: 500 Hz Please note: If operating above
40 ℃, derating is required
■ Built-in dynamic braking unit
Enhanced reliability and
protection against humidity and
dust pollution with class 2
PC-based conformal coating (resistant to
software: NEW 3C3 and 3S2 environments).
simplified Flexible installation modes
start up &
backup*2

PRG PRG ENTER

ENTER
PRG
ENTER

MF.K
MF.K
MF.K
RUN STOP/RES
RUN STOP/RES
RUN STOP/RES
STOP/RES

Side-by-side Wall mounted DIN rail mounted

Notes:
*1 Only single phase supply models.
*2 PC comms kit is required (optional accessory).
 General specifications
Voltage class Single-phase 220 Vac Three-phase 400 Vac
Drive model:
S0.4B S0.75B S1.5B S2.2B T0.4B T0.75B T1.5B T2.2B T3.7B
MD200xxxxB-NC
Height [H1]: 180 mm [H1]: 180 mm
Dimensions Width [W]: 75 mm [W]: 75 mm
Depth [D]: 145 mm [D]: 145 mm

Rated input voltage Single-phase 200 to 240 Vac -15% to +10% Three-phase 380 to 480 Vac -15% to +10%
Drive input

Rated input current [A] 6.5 11.0 18.0 27.0 2.6 4.5 5.5 6.5 11

Power capacity [kVA] 1.7 3.0 4.8 7.1 1 1.5 3.0 4.0 5.9

Rated input frequency 50/60 Hz ±5% (47.5 to 63 Hz)

[kW] 0.4 0.75 1.5 2.2 0.4 0.75 1.5 2.2 3.7
Applicable motor
[HP] 0.5 1 2 3 0.5 1 2 3 5
Drive output

Output current [A]*3 2.6 4.6 8 11 1.8 3.4 4.8 5.5 9.5

Overload capacity 150% for 60 s & 180% for 3 s

Max. output voltage 200 to 240 Vac (proportional to input voltage) 380 to 480 Vac (proportional to input voltage)

Max. output frequency 500 Hz

Recommended
80 80 100 100 150 150 250 300 400
power [W]
Braking
resistor

Minimum
resistance [Ω] ≥47.1 ≥47.1 ≥31.4 ≥31.4 ≥64.3 ≥64.3 ≥64.3 ≥64.3 ≥64.3

Enclosure*4 IP20

*3 Rated output current at a carrier frequency of 6 kHz.

*4 All units are fan cooled.

General connection diagram Dimensions

The input side in the dotted box is

different for single-phase and three
phase models. Perform wiring
according to the actual models.
Braking resistor

Breaker Fuse
Single-phase (+) BR
L1 U
200-240 VAC
Input L2 V M

Breaker Fuse
R
MD200 W
Three-phase Ground
380-480 VAC S
Input
T
MAIN CIRCUIT
Ground

Default settings:
CONTROL CIRCUIT
- DI terminals are active low (<5 V)
- DIO is used as a DI
DI input resistance is 3.6 kΩ.

Remote keypads (optional)

External operating panel interface
(F4 -00 = 1)
Forward run/stop DI1
DIP switches 1 and 2 set to ON by default
ON

(F4 -01 = 4)
Forward jog/stop DI2 1 2

Fault reset
(F4 -02 = 9)
DI3 DIO used DI active level: 0 V (<5 V) v Model: MDKE9
ON ON

as DI (default) Behaves as NPN input (default)

(F4 -03 = 12)
1 2 1 2

Reference 1 DI4 ON
DIO used ON
DI active level: 24 V Dimensions: 123 H x 72 W x 26.4 D (mm)
(F4 -04 = 0) as DO Behaves as PNP input
DIO terminal input DIO IP rating: IP20
1 2 1 2

function selection COM

(DIP switch 1 set to ON) DIO Open collector output 1: 0-24 VDC/0-50 m A Matching cable model:
Default: F5-04 = 1 (AC drive running)
(Dip switch 1 set to OFF) MDCAB 3.0 m (included)
COM
+10V
0-10 V AO
AI Analog voltage output Model: MDKE8 (LED type )
1-5 kΩ GND (0-10 V)
Dimensions: 116 H x 76 W x 40 D (mm)
AM

GND
0V
IP rating: IP20
T/C
Relay output
Matching cable model:
T/B TA-TB: NC
TA-TC: NO
T/A MDCAB 3.0 m (included)
Contact load: 3 A/250 AC 3 A/30 VDC
Potentiometer (single turn)

For more information, please contact our local offices.

International Offices Hong Kong SAR

Ahmedabad International Export Office
Germany-Stuttgart Turkey-Istanbul Tel: +91 794003 4272 Tel: +852 2751 6080 | [email protected]
Tel: +49 (0) 7144 8990 Tel: +90 (216) 706 17 89
[email protected] [email protected] Mumbai For other country distributors,
Tel: +91 22 4971 5883 contact the Hong Kong office.
Italy-Milano South Korea-Seoul New Delhi Inovance Technology Companies
Tel: +39 (0) 2268 22318 Tel: +82 (0) 10 7428 5732 Tel: +91 11 4165 4524 Shenzhen Inovance Technology Co. Ltd.
[email protected] [email protected]
Sales Network Suzhou Inovance Technology Co. Ltd.
France-Bordeaux India in Kolkata, Bengaluru, Pune, Coimbatore,
Tel: +33 (0) 5594 01050 Head Office Chennai Hyderabad, Vadodara, Jaipur
[email protected] Tel: +91 (0) 44 4380 0201 Email: [email protected] www.inovance.eu

Copyright 2023 © Inovance Technology Co., Ltd., All rights reserved. The information contained in this brochure is for guidance only. Data code: 19120167 V0.3