Daikin's Indian Market AC Solutions
Daikin's Indian Market AC Solutions
Packaged AC
Catalogue
Versatility is the mark
of Perfection
04 Air-Cooled (Ductable) 17
11 Air-Cooled (Rooftop)
Daikin believes in being close to its as phase imbalance voltage & Phase
customers. As a result we have reversal protection. We have also
developed a new range of packaged introduced aesthetically appealing new
products tailor-made for Indian wired LCD remote controller, with glossy
conditions. This new line-up of products finish, for ease of usage of our packaged
produced in Daikin India’s manufacturing air-conditioner. The new line-up of
facility at Neemrana, Rajasthan ensures packaged air conditioners gives you
reduced lead time and greater array of cutting-edge technology in air
features for Indian consumers. conditioners with industry-leading energy
Advanced features include cooling at efficiency for lower power bills. These
high-ambient temperature, Under locally produced high-static pressure duct
voltage & over voltage protection as well type are available up to 20 HP (16.7 TR).
01
Product Line-up
HIGH STATIC PRESSURE DUCT TYPE (Cooling only)
CAPACITY
INDOOR
UNIT
OUTDOOR
UNIT
INDOOR
UNIT
OUTDOOR
UNIT
INDOOR
UNIT
OUTDOOR
UNIT
Product Line-up
AIR-COOLED ROOFTOP UNITS (Cooling only)
CAPACITY
ROOFTOP
SERIESUATQ-C
UATQ60CGXY1 UATQ90CGXY1 UATQ120CGXY1 UATQ150CGXY1 UATQ180CGXY1 UATQ240CGXY1
ROOFTOP
SERIESUATYQ-C
UATYQ250MCY19 UATYQ350MCY1 UATYQ450MCY1 UATYQ550MCY1 UATYQ600MCY1 UATYQ700MCY1
03
UNIT
UNIT
Daikin’s Packaged
Air-conditioners are
engineered to meet high
static and large airflow
for wider coverage
requirements.
04
Air-Cooled (Ductable)
AIR CONDITIONERS
FDR-FRV/FRY Series
High static pressure duct type** FD-DSV/DSY Series
FDR65FRV16 FDR100FRV16
FDR130FRV162* FDR200FRY16
Improved Features
New wired
LCD remote controller
New LCD based wired type remote handset
with alphabetic error display like HP, LP, SPPR,
indoor fan current sensor etc. In-built energy
saver dedicated button and glossy finish.
Note: *Available in twin circuit also. **Models available in R-22 also (5.5 ~16.7 TR).
05
Best in class
Air Conditioning Components
Best in Class high grade Components of
Daikin Ducted Air Conditioners ensures
high energy efficiency, High Cooling,
high comfort and high reliability.
Pre-charged refrigerant
Daikin India’s FDR65, FDR100,
FDR130 and FDR200 models are
available with pre-charged refrigerant
for 7.5 meter piping length. No need
for additional refrigerant charge on-site
if piping length is upto 7.5 meters.
07
Comfortable
Superior air distribution
for comfortable living
The conditioned air can be effectively distributed to every corner
of the room through the ducting and this ensures a pleasant
environment for comfortable living.
L-shaped U-shaped Long
Versatility
Multiple rooms can be cooled together at the same time by using just one unit of fan coil unit.
Compact
Compact design of
built-in type helps blend
with interior decor
Indoor models are compact in size
and designed with twin coil structure.
This design effectively saves space
during installation.
Compact size
To fit in tight ceiling spaces, 450 mm
few models are available with
450 mm height only
08
Work & Servicing
Easy maintenance
The simple design concept has provided the ease
of maintenance and servicing. Access to the internal
part of the unit can be from the service panel or
other side of the unit by loosening a few screws.
Remote Controller
NEW
Wireless & Wired
Remote Controllers Wired Remote Model Number
4P408280-1(FDR/FD 65/100/130),
4P416386-1(FDR/FD200)
Wireless Remote Model Number
BRC4N151
Others
Outdoor Unit
Scroll compressor
All outdoor units are using scroll compressor which has better energy efficiency and quiet in operation.
Scroll compressor
Scrolls
High
Efficiency
Motor
Quiet
Shutdown
Device
09
Compressor
Compressor is known as heart of any Refrigeration & Air
conditioning system.
Daikin uses highly efficient Scroll compressor which ensures better
Volumetric Efficiency, Low noise ,reliable operation, built in safety.
ODU Fan
Aerodynamic design High efficiency Propeller Fan for optimize Airflow distribution
thus better heat transfer& lower noise level best suited for high Ambient conditions.
The Outdoor fan and fins that act as heat syncs draw the heat away so the unit
doesn't overheat.
The outdoor condensing unit becomes very hot with all that overheated refrigerant
running through it. The Outdoor fan and fins that act as heat syncs draw the heat
away so the unit doesn't overheat.
Motor
High RPM motors to improve airflow ,better insulation
Thermal Overload protector used for motor safety.
HP/LP Switch
These switches are design for Highly Precise Setting & Repeatability
HP Switch: The high pressure switch cuts-off power supply in case
of excess compressor discharge pressure thereby preventing
equipment damage.
LP Switch: The low pressure switch monitors the refrigeration
system for loss of refrigerant charge.
It also helps in stopping the evaporator (indoor) coil from freezing due
to a clogged/dirty filter or lower airflow over the coil.
10
Heat Exchanger
Blue Fin Condenser and Hydrophilic special coating on the fin of the
heat exchanger prevents corrosion, extending the life of the unit to
increased enhance performance.
Optimum Area Heat exchanger of both 7mm tubes & 3/8'' Heat
Exchanger increasing heat transfer area which increases cooling
capacity & Performance during high ambient temperature.
TEV
Thermostatic expansion valve(TEV) regulates refrigerant flow to cater to variations in
heat load and make the system more efficient by controlling Superheat & matches
system capacity.
over a broader temperature range. It increases the flow of refrigerant to provide better
cooling at higher temperatures. It’s design Protects the compressor motor by
preventing liquid slugging, which can damage compressors.
Drier
Filter Drier for liquid line protects refrigeration and air-conditioning
system by removing High moisture, acids and solid particles. With
these contaminants eliminated, systems are safer from harmful chemical
reactions. These are shock resistant built in steel shell construction.
Air-Cooled (Rooftop)
AIR CONDITIONERS - The Comfort with Higher Efficiency.
Rooftop
Package Unit
Daikin’s new range of rooftop packaged units has been
Component Features
1 Condenser Fan and Motor
Fans are of propeller type, direct driven by
weatherproof electrical induction motors. Condenser
fan motor has class F insulation and splash-proof
enclosure of up to IP55*.
• UATQ60/90/120/150/180/210/240/300CGXY1:
IP55
• UATYQ600/700MCY1: IP55
• UATYQ250/350/450/550MCY1: IP44
2 Condenser
Condenser coils are manufactured from seamless
inner grooved copper tubes mechanically bonded
3 Casing / Structure
All coils are tested against by Nitrogen holding
The unit casing used in UATQ-C & UATYQ-MCY1
at 609psig and highly precise Helium leak test at
series is made of zinc coated galvanized steel
235psig. All standard coils are up to 3 rows/14-16
sheets. It is further coated with an electrostatic
FPI, 3/8” (9.52mm) O.D. tubes.
powder coat and then oven-baked for a tough and
UltraGold Fin is offered as standard (1000hrs Salt
Spray Tested), which has longer life span under are used throughout to further reduce possibility
corrosive environment. of unit rusting.
13
4 Evaporator
V-belt drive as standard. It has class B insulation
Evaporator coils are manufactured from
and dripping water proof, IP22.
seamless inner grooved copper tubes
7 Expansion Device
optimum heat transfer. All coils are tested against
Electronic Expansion Valve is used to ensure
by Nitrogen holding at 609psig and highly
precise Helium leak test at 235psig. All standard
coils are 3-4 rows/14-16 FPI, 3/8” (9.52mm) 8 Compressor
O.D. tubes.
Compressor used in UATQ-C & UATYQ-MCY1
UltraGold Fin is offered as standard (1000hrs Salt Series Packaged Units are hermetically sealed
Spray Tested), which has longer life span under scroll type. All the compressors are provided with
corrosive environment. an internal overload protection.
Auxiliary Heater*
Auxiliary heater connection point is available on the
Fresh Air
Return Air
Horizontal Water
Source Heat Pump
MWH-D
At present, McQuay measures ACOP instead of COP Water Sourse System Water Loop System
Assess Door
Air Out
Heating Ratio
Correction Table
18 Heating Capacity
20 Cooling Capacity
22 Heating Power Input
0.90
0.85
DB Temperature of Air Return °C
DB Temperature of Air Return °C
27
0.75
25
22
0.70
20
18
0.65
6 10 14 18 22 26 30 34 35 70% 80% 85% 90% 95% 100% 105% 110% 115%
Water Inlet Temperature °C Water Inlet Temperature °C
Operating Range
Operating Range Cooling Heating
Note: If the units run beyond above operating limit, it may cause damage to the units.
17
Specifications
HIGH STATIC DUCT TYPE (Cooling only)
Btu/
66000 102000 132000 129600 198000
Nominal Cooling Capacity Hr
Height x
Unit Dimension Width x mm 450x1170 450x1660 470x1700 470x1700 590x1885
Depth x700 x700 x940 x940 x1145
Height x
Packing Dimension Width x 465x1370 585x1880 620x1930 620x1930 755x2130
mm
Depth x720 x740 x990 x990 x1250
Height x
Width x mm 930x1025 930x1200 930x1650 930x1025 930x1200
Unit Dimesion
Depth x410 x550 x620 x410 x550
Height x
Width x 1080x1170 1080x1350 1088x1846 1080x1170 1080x1350
Packing Dimension mm
Depth x470 x620 x720 x470 x620
OUTDOOR
Refrigerant Pre-Charged
(At 7.5m Pipe Length) kg 4.4 5.7 8 2X4.4 2X5.9*
Note: All specifications are subject to change by the manufacturer without prior notice.
Cooling capacity is based on the conditions below:
Cooling - 27°C DB / 19°C WB indoor and 35°C DB outdoor.
Refrigerant (R-410) is pre-charged at factory shipment (Outdoor Unit).
18
Specifications
HIGH STATIC DUCT TYPE (Cooling only)
5.5 TR 8.5 TR 11.0 TR 16.7 TR 20.8 TR 29.2 TR 41.7 TR
Indoor unit FD65DSV16 FD100DSV16 FD130DSV16 FD200DSY16 FD250B2Y1M FD350B3Y1M FD500B4Y1M
Model R100DSY
R130DSY 16x1 Nos R130DSY
Outdoor unit R65DSY16 R100DSY16 R130DSY16 R100DSY16x2
16x2 Nos R130DSY 16x4 Nos
16x2 Nos
Btu/h 66000 102000 132000 200000 250000 350000 500000
Capacity
kW 19.34 29.9 38.7 58.6 73.27 102.58 146.53
Total Input Power W 6450 9500 13000 19510 25568 36783 51720
Running Current A 11 17 22 33 44.4 62.9 89.7
Power Source V/Ph/Hz 415 / 3 / 50
Refrigerant Type R-22
Control Operation LCD Wired Controller
High cfm 2200 3400 4400 6600 8000 10500 15000
Air Flow
Medium cfm 2045 3100 3850 5800 - - -
Low cfm 1890 2800 3330 5000 - - -
High Pa 50 50 60 80 200 343 250
Sound Pressure Level
INDOOR UNIT
dBA 53 53 57 59 63 66 68
Unit Dimension Height mm 450 450 470 590 1231 1486 1486
Width mm 1170 1560 1700 1885 1766 2022 2174
Depth mm 700 700 940 1145 1069 1069 1336
Packing Dimension Height mm 465 585 620 755 1506 1766 1766
Width mm 1370 1780 1930 2130 2034 2279 2431
Depth mm 720 740 990 1250 1412 1422 1684
Unit Weight kg 60 90 128 175 343 440 606
Condensate Drain Size mm 40.5 25.4 25.4 25.4
Unit Dimension Height mm 930
Width mm 1025 1200 1650 1200 1650 *1200/1650 1650
Depth mm 410 550 620 550 620 *550/620 620
Packing Dimension Height mm 1080 1080 1088 1080 1088 *1080/1088 1088
INDOOR UNIT
Note:
Cooling capacity is based on the conditions below:
Cooling - 27°C DB / 19°C WB indoor and 35°C DB outdoor.
Refrigerant (R-22) is pre-charged at factory shipment (Outdoor Unit).
*Given value is for 2 Nos ODU as per ODU model details mentioned above.
19
Note: 1. Gross Cooling Capacity Based on 27°C DB / 19°C WB Indoor and 35°C DB outdoor
2. All Units are being tested and Comply to ISO 5151 (Non-Ducted Unit) or ISO 13253 (Ducted Unit)
3.
Depth mm/in 2063 / 81.2 2113 / 83.2 2113 / 83.2 2670 / 105.1 2670 / 105.1 2670 / 105.1
Packing Height mm/in 1370 / 54 1200 / 47.3 1290 / 50.8 1270 / 50.0 1520 / 59.9 1670 / 65.8
Dimension Width mm/in 1730 / 68.2 2280 / 89.8 2280 / 89.8 2280 / 89.8 2280 / 89.8 2280 / 89.8
Depth mm/in 2300 / 90.6 2350 / 92.6 2350 / 92.6 2900 / 114.2 2900 / 114.2 2900 / 114.2
Unit Weight (Net) kg/lb 445 / 981 580 / 1278 610 / 1344 780 / 1720 830 / 1830 970 / 2139
Refrigerant Pre-charged 6.1 / 13.4 (2 X 5.8) / (2 X 7.2) / (2 X 8.7) / (2 X 10.4) / (2 X 11.6) /
(2 X 12.8) (2 X 15.9) (2 X 19.2) (2 X 22.9) (2 X 25.6)
Note: All units are being tested and comply to ISO 5151 (Non-Ducted Unit) or ISO 13253 (Ducted Unit). Cooling indoor: 27°C dB / 19°C WB, outdoor: 35°C dB
/ 24°C WB; Heating-indoor: 20°C dB, outdoor: 8°C dB / 6°C WB
* Also available in R-407 C
20
Specifications
HORIZONTAL WATER SOURCE HEAT PUMP
0.78 TR 1.49 TR 1.89 TR 2.48 TR 2.90 TR 3.55 TR
Model
MWH010DRP MWH020DRP MWH025DRP MWH030DRP MWH040DRP MWH050DRP
Nominal Cooling Capacity W 2750 5250 6650 8770 10200 12500
Nominal Heating Capacity W 3270 6100 7100 9050 10250 13000
Air Flow Rate m³/h 580 1050 1250 1700 1900 2300
Power Supply 220V~/50Hz
ESP Pa 20 30 30 30 50 50
Dimension (Length×Width×Height) mm 895×520×375 1265×655×435 1265×705×435 1390×745×435 1450×795×460 1450×795×510
Condenser Type Tube in Tube Heat Exchanger
Water Flow Rate m³/h 0.61 1.12 1.42 1.94 2.14 2.67
Water Pressure Drop kPa 13 34 60 40 40 60
Water Pipe Connection R3/4 R3/4 R3/4 R3/4 R3/4 R3/4
Compressor Rotary
Rated Power Cooling W 700 1220 1520 2230 2250 2850
Heating W 740 1280 1540 2050 2300 2780
Rated Current Cooling A 3.38 5.93 7.46 11.03 10.57 13.76
Heating A 3.45 5.95 7.54 10.17 10.77 13.43
Condensate Drain Pipe mm 20
Refrigerant Type R410A
Charge kg 0.74 1.35 1.46 0.95×2 1.3×2 1.55×2
Sound Pressure Level dB(A) 34 40 45 48 44 47
Weight kg 56 101 103 125 155 161
Notes:
Cooling capacity is based on 27°C (DB), 19°C (WB) air inlet temperature and 30°C water inlet temperature, 35°C water outlet temperature.
Heating capacity is based on 20°C (DB), 15°C (WB) air inlet temperature and 20°C water inlet temperature.
Contact Address
Disclaimer
As a continuing policy of product innovation at Daikin, the design and specifications are subject to change without prior notice. The visuals of the products
in the brochure are representative only, actual products might differ from the ones shown.
‘Products mentioned in this brochure comply with RoHS regulations as per E-waste (Management & Handling) Rules, 2011and should not be mixed with
general household waste at the end of their useful life.’ For more details kindly visit our website www.daikinindia.com or contact our customer care centre
at 011-40319300 / 1860 180 3900.