Scribd
Upload
23 views

Im en

This user manual provides safety precautions and instructions for an alarm clock. Key points include: - Do not disassemble the device and keep it away from children. Only qualified professionals should repair damaged products. - Batteries should not be exposed to heat or damaged. Insert batteries correctly observing polarity. - The alarm clock runs on USB power or 3 AAA batteries. Features include time, date, alarm and light settings that are configured using the mode and up/down buttons. - The device has a 2 year warranty against manufacturing defects when used normally. Damage to batteries or normal wear and tear are excluded.

Uploaded by

a.fostier.anaik
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
23 views

Im en

This user manual provides safety precautions and instructions for an alarm clock. Key points include: - Do not disassemble the device and keep it away from children. Only qualified professionals should repair damaged products. - Batteries should not be exposed to heat or damaged. Insert batteries correctly observing polarity. - The alarm clock runs on USB power or 3 AAA batteries. Features include time, date, alarm and light settings that are configured using the mode and up/down buttons. - The device has a 2 year warranty against manufacturing defects when used normally. Damage to batteries or normal wear and tear are excluded.

Uploaded by

a.fostier.anaik
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 1

EN - Please read this user manual carefully and keep it for future reference.

SAFETY PRECAUTIONS
Do not disassemble the device. This device should be kept out of the reach of young children. If the product is damaged, it must be repaired by the manufacturer, its after-
sales service or by a qualified person, to avoid any danger. Keep new or used batteries out of the reach of children. Never use the appliance and its battery in extreme
conditions (high or low extreme temperatures, high altitude…) during use, storage or transportation. Warning: Batteries shall not be exposed to excessive heat such as
sunshine, fire or the like. Never damage the appliance and its battery. Never short circuit the battery. CAUTION: Risk of fire or explosion if the battery is replaced by an
incorrect. Batteries are to be inserted with the correct polarity. Exhausted batteries are to be removed from the product.
TREATMENT OF END OF LIFE ELECTRICAL AND ELECTRONIC DEVICES
Application in European Union countries and other European countries with selective collection systems.
This symbol, affixed to the product or its packaging, indicates that this product must not be treated with household waste. It must be handed over to an
appropriate collection point for the recycling of electrical and electronic equipment.
By ensuring this product is disposed of properly, you will help prevent potential negative consequences for the environment and human health. Recycling
materials will help conserve natural resources. For any additional information regarding the recycling of this product, you can contact your municipality, your
recycling center or your distributor.

Features
Power: 0.25W
Power supply: DC 5V 1A USB cable or 3 x AAA (3 x 1.5V) batteries (not included)
The symbol means that the current is direct (Direct Current).
Ambient operating temperature: 0 to 40°C
Power on: Connect the power cable (included) to the charging port of the alarm clock, and insert the other part of the cable to a 5V voltage USB port
(computer, external battery, etc.) or insert 3 AAA batteries (not included) into the compartment under the product, respecting the polarity.
ATTENTION :When plugging in the alarm clock with the power cable, be sure to remove the batteries.
Display :Press MODE to change the display: Hour YearDay monthAlarm.
Set time and date: In time display mode, hold MODE for 3 seconds. Press UP or DOWN to adjust the hours. Then press MODE to switch to minute setting and adjust
them with UP or DOWN. To scroll through numbers faster, long press UP or DOWN. Please note, if no operation is carried out, you will return to the time display.
Repeat to set in this order: yearsmonthdays. Press MODE to finalize the setting. To switch from 24Hr mode to AM/PM hold DOWN for 3 seconds.
Set the alarm: In time display mode, press MODE 3 times to switch to alarm display (AL symbol will appear in the top left corner). Then hold MODE for 3 seconds. Press
UP or DOWN to adjust the hours. Press MODE to switch to minute setting and adjust them with UP or DOWN. Press MODE again, the sound icon appears and select
the desired natural sound (between 1 and 5) with UP or DOWN. (1: Bird / 2: Waves / 3: Forest / 4: Stream / 5: Piano).To increase the alarm volume, press “+”, and “-” to
decrease it.
Press MODE to switch to dawn light setting. Press UP or DOWN to enable (ON) or disable (OFF) the dawn light. Press MODE to finalize the setting and return to the time
display.
Activate the alarm: Once your configuration is finished, in the time display mode, press UP to select the alarm type (the corresponding symbol will then appear to indicate
the selected alarm type): alarm - natural sound - extinct. A WAKE symbol is displayed at the top left of the screen when the glow function is activated.
The dawn simulator will be triggered 20 minutes before the scheduled alarm and its light will be progressive. The light must be turned off and the alarm must be
activated(the symbol Or must be displayed depending on the selected alarm type, and the WAKE symbol for the glow function).Please note, the glow function will
not be triggered if the alarm is not activated.
When the alarm rings, press any button to stop it or SNOOZE/LIGHT (located in the center of the cork part) to activate the snooze function every 5 minutes.
Backlight:Press the SNOOZE/LIGHT button to activate the backlight (it will turn off after 5 seconds).
Lamp :Press WAKE to turn on the light. You can press again to change the brightness as follows: high – medium – low – off.

WARRANTY:
This product is guaranteed for 2 years against any manufacturing defect and under normal conditions of use from the date of purchase in store (the receipt being proof) or
from the date of receipt in the case of a product ordered online or by mail order. In the event of a malfunction, you can exchange this product in the store where you bought
it with the receipt or contact our Customer Service.
This warranty does not cover damage to the battery or normal wear and tear of the product.

You might also like