Scribd
Upload
168 views1 page

Signed LCA Declaration Jindal RC 08022021

This document summarizes a life cycle assessment comparing the environmental impacts of producing metal trims through two manufacturing processes - hot chamber die casting and sheet metal pressing - with either a gun metal finish or original finish. The assessment found that using the original finish without electroplating results in 14-100% savings across impact categories like electricity and chemical consumption, solid waste generation, and greenhouse gas emissions for the die casting process, and 14-91% savings for the sheet metal pressing process. The study was conducted for Jindal Polybuttons Pvt. Ltd. in India from October 2020 to January 2021.

Uploaded by

PRASHANT DASH
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
168 views1 page

Signed LCA Declaration Jindal RC 08022021

This document summarizes a life cycle assessment comparing the environmental impacts of producing metal trims through two manufacturing processes - hot chamber die casting and sheet metal pressing - with either a gun metal finish or original finish. The assessment found that using the original finish without electroplating results in 14-100% savings across impact categories like electricity and chemical consumption, solid waste generation, and greenhouse gas emissions for the die casting process, and 14-91% savings for the sheet metal pressing process. The study was conducted for Jindal Polybuttons Pvt. Ltd. in India from October 2020 to January 2021.

Uploaded by

PRASHANT DASH
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

LIFE CYCLE ASSESSMENT

DECLARATION STATEMENT

A Comparative Analysis of Metal Trims:


Hot Chamber Die Casting: Gun Metal Finish vs. Original Finish
Sheet Metal Pressing: Gun Metal Finish vs. Original Finish

Ref. No.: PPS/IND/2020/08/002

Name of Product : Metal Trims


Name of Company : Jindal Polybuttons Pvt. Ltd.
Functional Unit : 1 Kg of Metal Trims
System Boundary : Gate to Gate
Assessment Site : Jindal Polybuttons Pvt. Ltd.
10 K.M. Stone, Delhi Road, Hisar, Haryana – 125006. India
Assessment Period : 06-10-2020 to 25-01-2021
Assessment Guideline : ISO 14040:2006 & ISO 14044:2006
Data Collection : Applicant collected and provided all the data for different batches
Data Verification : 15/12/2020
Report No. & Date : Ref. No.: PPS/LCA/2021/01/01; Report Date: 25/01/2021
(Please refer to report for detailed information)
Results :

% Savings by Original Finish % Savings By Original Finish


Impact Category (without Electroplating) for Hot (without Electroplating) for
Chamber Die Casting Process Sheet Metal Pressing Process

Electricity Consumption (kWh.) 14% 46%

Chemical Consumption (Kg.) 45% 75%

Solid Waste (Kg.) 100% 93%

Waste Water Generation (Lit.) 75% 91%

Water Consumption (Lit.) 65% 91%

GHG Emissions (KgCO2e.) 0% 14%

The values show the positive impacts of the original finish with the environmental benefits represented by the
percentage savings for impact categories for HCDC & SMP process. Thus, Jindal Polybuttons, Hisar, India, has
successfully completed LCA Studies.

Declared By,

Mr. Prakhar Goel


Manager Date and Place of issue,
Peterson Projects & Solutions 29/01/2021, Rotterdam, Netherlands

You might also like