0 ratings0% found this document useful (0 votes) 474 views8 pagesEE Ayuda 5
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content,
claim it here.
Available Formats
Download as PDF or read online on Scribd
2-7 uniform magnetic field makes an angle of 30° with
the zaxs. The magnetlc ux through a 3-m™2 portion
ofthe xy plane is
A. 20Wb
8B 30Wb
C. 52Wb
D. 6.0Wb
‘An RLC series crcult has L=100 mH and C=1pF. It is
connected to a 1000-Hz source and the source emf
found to lead the current by 75°. The value of Ris
A, 12.6 ohms
B, 126 ohms
©. 175 ohms
D._ 1750 ohms
‘An RL series creuit Is connected to an ae generator
with a maximum emf of 20V. Ifthe maximum patertial
difference acrass the resstor fs 16V, then the maximum
potential difference across the inductor is
a 2v
Bo4V
c av
D. 256V
‘A 35-uF capactor is connected to a source of sinusoidal
emf with a frequency of 400 Hz and a maximum emf of
20. The maximum current is
A, 028A
BBA
c. 230A
D. 1400
One primary and one secondary terminal af a bwo-
winding transformer are connected to an ohmm-meter
instrument, What willbe the reading on this
instrument?
“AL Infinity
B. Equal to winding resistance
C,_ Zero infinity
D. Zero
‘An ideal single phase transformer has a voltage rating
of 2300230 V. A motor to be connected across the
secondary will draw 30 A at 200 V. What value of
resistance in ohms to be connected in the primary
Circuit to have 200 V across the motor during
operation?
A 50
B60
c. 80
‘DL 100
‘A transformer has primary and secondary turns of 60
and 240, respectively. 160 turns winding has 5% tap,
cakclate the primary voltage applied in vots to 95% of
the winding that will permit the rated output voltage of
480 V.
A 204
B 12
cae
D118
A single phase transformer is rated 1 KVA, 240/120 V,
{60Hz. Because of an emergency, the transformer has to
be used on a SOHz system. Ifthe fhx densty in the
transformer core Isto be kept the same as at 60H2 and
240 V, what voltage shouki be applied at SOHz in volts?
R180
3, 300
C240
‘D. 200
[A paralll-pate capactor has a plate are of 0.3 m2
{and a plate separation of 0.1 mm. If the charge on
‘each plate has 2 magnitude of §x 10-6 C then the
force exerted by one plate on the other has 2
magnitude of about
AO
BOSON
c ON
D, 1x10%4N
{A parallel plate capacitor has a plate area of 0.2 m2
‘and a plate separation of 0.1 mm. Ifthe charge on
‘each plate has 2 magnitude of 4x 10-6 C the
potential difference across the plates is approximately.
AO
B 4x10%2V
© 1xi02Vv
‘Ds 2x10°2V.
[An electric motor, under load has an effective
resistance of 30 ohms and an inductive reactance of 40
‘ohms. When powered by a source with a maximum
voltage of 420 V, the maximum current is
A 60K
8 84a
c 105A
D. 120A
|A power compary provides 650 V, 3 phase to 2 certain
‘customer who has 3-3 phase loads connected in
parallel, The average power and power factor of each
load are as folows: Load 1, 15 kW, pf=0.6 lad Load 2,
20 KW, pf=0.707 lead; Load 3, 10 KW, pf=0.4 lg. The
Toad are connected to @ substation by means ofa cable
having 2 resistance of 1.1 ohms/conductor with no
reactance. Find the line voltage atthe substation in
vols.
A 7a
3 736
c 75
2. 695
‘A 3-phase, 4157 V abc system supplies a wye-
‘connected oad with impedance of 38.4428.8
‘ohm/phase. Taking Vab as the reference vector, find
‘the current inline aia amperes,
A, 19.64 + 345.98
B
C. 19.64— }45.98
D. 4598-196414, In an oscillating LC circuit, the total stored energy is U
and the maximum charge an the capacitor is Q. When
the charge on the capacitor is Q/2, the energy stored in
the inductor is
AL UR
B Ula
c. (4/3)U
‘D. 3u4
15, In an oscillating LC circuit, the total stored energy is U.
“The maximum energy stored inthe capactor during
one cycle.
AL UR
B uly2
cu
De uy(en)
16, The electrical analog of a spring constant kis
AL
Bop
ac
De
17, What's neglected ina short transmission line system
(up to about sokm)
A. Resistance
B. Reactance
C. Capacitance
D. Admittance
18. ASHE capactor, an 80mH Inductance and a 500 ohm
resistor are connected in parallel across a voltage
source of 12 -J6 V. Find the current ifthe angular
velocity is 500 rad/sec.
A, 03332112°
B
c. 333i12"
D. 3332-112°
19, An electric stove draws 7.5 A form a 120 V de source
What is the maximum value in amperes of an
alternating current that will produce heat atthe same
rate as the 7.5 A direct current?
A. 12.99
B 68
c. 375
‘D. 106
20, Which of the following is hazardous condition
1 Excessive noise
TL Lack of system warning
IL Congestion
al
B Tandi
c, Wand mt
21,
2,
23,
24,
25,
26.
2».
For an unbalanced 3 phase load, which connection is
sultable?
A, 3 wire, open delta
8. Three wire, wye
C. Four wire, Wye
3. 3 wire, deta
Which ofthe following is NOT a property of magnetic
field ines?
‘A. The field is stronger wien the tines are closer
together
3, The lines intersect surfaces of equal intensity
at right angles
C.Magneti field lines have no beginrings and no
ends
Which ofthe following has the greatest effect in
decreasing the oscillation frequency of an LC circu?
Using instead
A. UP and c/2
8 U2and 2c
cand?
‘D, 2Land2c
‘A 45-mH inductor is connected to @ source of sinusoidal
‘emf with a frequency of 400 Hz and a maximum em of
20.V, The maximum current is
AO
‘B. O18A
Gata
D. 360A
[An instrument that can be used for both DC and AC
3, Hot ron
Induction type
3. Moving coi
‘The power intended to be available even under
‘emergency condition is called
‘A Firm power
3, Hot reserve
Cold reserve
D. Spinning reserve
‘An LC series circuit with inductance L and a capacitance
Chas an oscilation frequency f, Two inductors, each
with inductance L, and two capacitors, each with
‘capactance Care all wired in series and the circu
‘completed. The oselation frequency is
A fia
3 AR
ae
o. 428,
23,
30,
31
32
33
34
35,
36,
A capacitor isan LC oscillator has @ maximum potential
afference of 15 V and a maximum energy of 3604). At
2 certain instant the energy in the capacitor is 4043. At
that instant what isthe emf induced inthe inductor?
A, Zero
37
BO5V
D. 1s 38
In a DMA write operations, the data is transferred
"A. From 1/0 to memory.
8. Frommemory to /O
C._From memory-to-memory
D. From 1/0 to 70
38,
During DMA acknowledgement cycle, CPU relinquishes
‘A, Address bus only
‘Address bus and control bus
Control bus and data bus
8
c,
‘D, Data bus and address bus
1m compensation theorem a network containing
(generator can be replaced
B. Its infinte impedance
C._Another generator
Di LCcircut
{In a circuit breaker the time duration from the instant
ofthe faut tothe extinction ofthe ac is known as
‘A. Total clearing time
B. Operation time
C. Lead time
D. Lag time
4
What is earthing or grouncing?
‘A. Connecting electrical machines to earth
'B. Providing connections to the ground
C._ Connecting electrical machines to source
D. Providing source of current
42,
How many execution units are there in Pentium
microprocessor?
a
B
e
D.
48
‘Access time is faster for
‘A. ROM, Read Only Memory
'B. SRAM, Static Random Access Memory
‘C. DRAM, Dynamic Random Access Memory
1D. ERAM, En Route Automation Modernization
Cycle stealing techniques is used in
‘A. Interrupt data transfer
B,_ Polled cata transfer
D. None of these
In DMA the data transfer is controlled by
‘A. Microprocessor
3, RAM
c Memory
‘D. YO Devices:
In which T-state does the CU sends the address to
memory of I/O (Input/Output) and the ALE (Address
Latch Enable) signal demultiplexing
ATL
8
c
0,
gad
‘A capacitor in an LC oscilator has maximum potential
difference of 15 V and a maximum energy of 360). At
2 certain instant the energy in the capacitor is 40. At
that instant, what is the potential cifference across the
capactor?
A, Zero
BSV
© iv
Dd. 15
‘An industrial consumer has a load pattern of 2000 KW
at 0.8 pf lagging for 12 hrs and 1000 KW at unity pf for
412 bs. Its load factor is
A 06
B08
c os
(D. 0.75
[A belt criven generator supplies 875 KW at 90%
efficiency, The loss in the dive belt is 25%, Calculate
the hp of the engine needed to drive the generator.
A, 1353,
3, 1346
C1336
D. 1363
‘An ice plant has 100 kW, 80% lagging, requires en
‘open delta bank. What i the transformer rating of the
system to be implemented?
A. SOKVA
B.75KVA,
CBO KVA
D, 95 kVA
'A.220MVA and 11KV base parameter. Express the
138K in terms of per unt
A 1254
3. 1524
© 1054
3, 14.52444, A 1004VA, 20/5 KV transformer has an equivalent
Impedance of 10%. Calculate the impedance of the
transformer referred to th SkV side,
A. 400
B50
©. 200
Ds
45. Nine identical wires, each of diameter d and length |
are connected in series, The combination has the same
Fesistance as a single similar wie of length L but whose
diameter is
AL 3d
Bod
c a3
D. 4/9
46. Acertain sample caries a current of 4 A when the
potential difference is 2 V and a current of 10 A when
the potential difference is 4 V. The sample
‘A. Obeys Ohms law
'B. Has a resistance of 0.5 ohms at 1 volt
C._ Has resistance of 25 ohms at 1 volt
D. Has a resstance of 2.5 ohms at 2 volts
47, Suppose this page is perpendicular to 2 uniform
‘magnetic field and the magnetic flux through itis 5 Wb.
If the page is turned 30° around an edge the flux
through it wil be
A. 25 Wb
(B43 Wb
cS Wb
D. 58Wb
48, ‘The area of dam reservoirs 218 x 212 ft, ifthe dam.
lost 1 fof its depth produced an output of 100 hp at
70% eff. Whats the original height of the reservoir?
‘A, 90,89 ft
B 89.98
C. 98.08 FE
D. 88.09 f
49, Tendency of the curent to mave outward the surface
of a conductor
A, Seebeck effect
B. Thompson effect
Skin effect
D. Hall effect
'50, Which of the following is used for tuning an amplitude
‘madulation (AM) signal
B. Thermistor
C. Resonator
D. Pindow
51
52.
53,
55.
‘car travels northward at 75 kmh along a stright
road ina region where Earth’s magnet field has a
vertical component of 0.50 x 10-4 T. The emf induced
between the left and right side, separated by 1.7mis.
AL 18 mV
3 3.6mv
c 64m
0. 13mv
[An RLC series circuit is connected to an oscilator with @
maximum emf of 100 V. I the vltage amplitudes VR,
‘VL and VC are all equal to each other, then VR must be
A uv
3, 50V
c ev
‘D. 100V
Which ofthe following transformer has only one
winding?
A Current
8, Distrbution
C.Autotransformer
3. Power
Which ofthe following instrument | used to measure
high resistance as in the measurement of insulation
resistance?
‘A, Wheatstone bridge
‘B, Megger
© Ohmmeter
D, Mult-testar
‘The customer is only charged or credited as the case
may be, forthe difference between the electricity
supplied by the Distribution Utlity when the times it has
‘excess VRE generation both of which are metered using
celther 2 uni-directional meters, one for important and
‘one for expert ora single bi-directional meter. What do
you call his scheme?
A. Dual metering
‘8. Net metering
C. Market metering
3. Import-export metering
Capacitor C1 and C2 are connected in series and 2
potential diference is applied to the combination. Ifthe
‘apactor that is equivalent to the combination has the
same potential difference, then the charge on the
‘equivalent capacitor isthe seme as
"A. The charge on CL
3, The sum ofthe charges on Ci and C2
C._ The difference ofthe changed on Ct and C2
D, The product ofthe charges on Cl and C2.57, The cpactance of india capactor can be
increased by
‘A. Deereasing both the rads ofthe inner
cylin and te enath
8
(C._Inereasing the racus ofthe outer cylindrical
shell and decreasing the length
D._ Decreasing the radius ofthe nner cylinder and
Increasing the racius of the cuter cylindrical
shel
58, Ifthe charge on a parale-plate capacttor is doubled
‘A. The capactance is halved
B. The capacitance id doubled
C, The electric fed is halved
DB
'59, The magnetic fed B inside a long ideal solenoid is.
Independent of
‘A, The current
The spachng ofthe wineings
C._ The core material
oO
60, The rms value ofan ac current is
‘A. Its peak value
B, Its average value
e
D. that steady current that wil charge a battery
at the same rate as the actual current
61, When the frequency ofthe oscillator in a series RL
circut is doubled
‘A. The capacitive reactance is doubled
B
C. The impedance is doubles
D._ The current amplitude is doubled
62. Two balanced 3 phase loads are connected in parallel.
Load 1, 20 kW, 0.85 pf lag and Load 2, 15 kW, 0.5 pf
lag. The line voltage atthe terminals of the loads is
“440. The load terminals are connected tothe source
terminals by means ofa cable which have an
impedance of 1 + j3 ohms/conductor. What i the line
voltage atthe source terminals in vlts?
A 715
B75
C795
DL 735
63, In a purely inductive circuit, the current lags the
voltage by
A, Zero
B
. One-half ofa cycle
DL Three-fourths of a cycle
65,
67,
7.
Ina purely capacitive circuit the current
A
Leads the voltage by one-half ofa cycle
C._Lags the voltage by one-fourth of a cyde
D._Lags the voltage by one-half ofa cyde
‘An RLC circuit has a capacitance of 12 uF, an
Incuctance of 25 mH, and a resistance of 60 ohms, The
current asclates with an angular frequency of
AL 1.2 «103 rad/s
B14 103 rags
1.8% 103 rad/s
D. 22x 103 radis
‘A 3 phase system supplies two, 3 phase loads
connected in parallel as follows: Load 1, 80 kW and 60
leaing KVAR and Load 2, 180 KW and 160 lagging
VAR. Find the total ine current in amperes,
A 12h
B. 136,
© 18
D129
‘lead of SOA must be protected by __AT inverse
time cirut breaker
AL 125
B 625
C150
D. 80
Acell when connected toa 12 V de source draws 1 A.
‘When the same coll is connected to 24 V, 60 Hz ac
our, it draws the same current. What isthe
Incuctance ofthe colin mH?
A 40
BSS
c 62
D. 70
What type of fuse limits the faut curent and usually
completes its purpose in half-ycle (0.00833 see)
“A. Current limiting fuse
B. Non-curent fuse
C Expulsion
D. Cutoff fuse
\What isthe total impedance in ohms ofa resistance o
200 ohms connected in parllel with a capactive
teactance of 200 ohms?
A 1614 ~j1414
B 707-3707
C100 j100,
1B. 200-2007.
n
B.
74,
5.
%6.
7.
‘A resistance of 200 ohms and 1.04 inductor and 200)
‘capacitor are connected in seles across SOV de
supply. The voltage is applied at t=0, determine the
‘maximum current
AL LARA
B 418A,
C184 A
D. 481A,
‘A circuit consisting of 3 resistors rated 10 ohms, 15,
‘ohms and 20 ohms are connected in dlta. When
arranged in wye, what isthe equivalent resstance
between the 10 ohms and 20 ohms resistors>
‘A, 3.33 ohms
B. 6.66 ohms
C. 4.44 ohms
DL 4.46 ohms
In subsequent eration, a voltage-controlled bus is
treated asa load bus when its
|A. Active power limit is violated
B. Voltage limit is violated
-C. Reactive power limit is violated
Di Either (a) or (b)
‘A__ is an electrical device that prevents an
electrocution caused by an accident or equipment
malfunction,
‘A, Circuit breaker
B Fuse
C. Fault interrupter
'D. Ground fault circuit interupter
‘Accurent is clockwise around the outside edge of this
page anc a uniform magnetic field is directed parallel to
the page, from left to right. IF the magnetic force is the
‘nly force acting on the page, the page wil tur so the
right edge,
“A. Moves toward you
B, Moves away from you
C. Moves to your right
D. Moves to your lft
‘A 180-g block on the end of a spring constant of 35N/m
is pulled aside 25cm and released form rest, The
electrical analog the maximum charge on the capacitor
is 0.25C, The maximum current in the LC cicut is
AL 038A,
B 0.0254,
©. 40a
D. 238
“The commonly used light sensor in 2 modern fax
machine is the
‘A. Photo tube
B, Photo transistor
C. Charge couple device
D_Liguid crystal display
1B. A charged capacttor and an inductor are connected in
series. At time t=0 the current is zero, but the capacitor
's charged, IFT is the period of the resulting
‘oscillations, the next time after t=0 thatthe voltage
‘across the inductor is @ maximum is
AT
a T4
cm
oT
79. A charged capacitor and an inductor are connected in
series, At time t=0 the current is zero, but the capacitor
|s charged, IFT isthe period of the resulting
oscilations, the next time after t=0 thatthe current is
‘maximum is
AT
BT
c 1
oT
180, A total resistance of 3.0 ohms is to be produced by
‘combining an unknown resistor R with 12-ohm resistor.
\What Is the value of Rand how ist tobe connected to
the 12-ohm resistor
‘A. 4.0-0hm, parallel
8, 4.0-ohm, series
G. 24-0hm, parallel
©. 24-ohm, series
‘81. A generstor delivers a load trough @ pair of wires,
‘each of which has a resistance of 0.06 ohm. Ifthe load
voltage and power are 120V and 4.8kW, respectively.
‘What is the power loss inthe line wires?
A 192W
3 195W.
c 193.
D. 198 W
£82. A source with an impedance of 100 ohms is connected
to the primary col of a transformer and 2 resistance R
's connected tothe secondary col. Ifthe transformer
thas 500 turns in its primary coll and 100 turns ints
secondary coll and the greatest power will be dissipated
In the resistor if R =
AO
3, 0.25 ohms
C. 4.00hms
D. 50 ohms
183. An LC creuithas a capactance of 301F and inductance
(of 15mH, At time t=0, the charge of the capacitor is
10[Cand the current is 20mA. The maximum charge of
the capactoris
A 14
B12
cw
D. 2484,
85,
86,
87,
88,
89,
90,
In a 3loop network, we get the following equations by
Kirchhof's aw:
15911-5092=1
470 11 ~ 2400 12 + 37013 = 1
142 11 -380B
Where 11,12 and 13 are loop currents. If 13=2.53mA
‘hat isthe value of the current of [tin mA?
A. 028
8B 319
© 218
(D638
‘A.1384, 36 short transmission line has @ per phase
impedance of 2 + j4 ohm. Ifthe line supplies @ 25 MW
load of 08 pf lagging, calculate the efficiency of
‘transmission.
A. 90.67%
B. 87.78%
C. 98.78%
De 80.55%
Given a transformer of 8 MVA, 69 KV/13.8 KV with 79%
Impedance, find the unit impedance at 100 MVA, 67 kV
base.
‘AL 0.928 pu
8. 0.901 pu
. 0.113 pu
D. 0.875 pu
{A single phase transformer rated 1OOKVA, 2.4KV/240V.
If 240V winding is short-circuited, the rated current
flows when the voltage applied is 2.4kV winding is
1.O54KV. The power input is 3.89KW. Wht isthe value
ofthe reactance referred to high-voltage winding?
A. 262
Be 252
© 242
D. 225
‘A 10-turn conducting loop with a radius of 3.0cm spins
‘at 60 revolutions per second in a magnetic fed of
10.507, The maximum emf generated is
A. 0014y
8. 053V
c 53V
18
‘Thee tat appears in Faraday’ aw
‘Around a conducting circuit
18 ound he boundey othe suce used to
compute the magnetic ux
C._Throughout the surface used to compute the
‘magnetic Nux
D. Perpendicular to the surface used to compute
the magnetic ux
A square loop of wire les inthe plane of page A
decreasing magnetic fel is directed into the page. The
Induced current in the loop is
'R, Countercockwise
B. Clockwise
c. Zero
DL Up the left edge from right to left along the
top edge
‘91, A magnet moves inside @ col. Consider the fllowing
factors. Which can affect the emf induced in the cl?
1. Strength of the magnet
IL Number of turns inthe col
‘Speed at which the magnet moves
A Tony
3. Tony
© Land it only
‘Ds LIL UL
92) A rectangular loop of wire has area A. spaces
perpen to uniform magnetic eld 8 and then
Sun around one of ts sces at frequency f. The
‘maximum induced emf 's
A Bar
3. Bar
caw
‘Di, 2nBAF
‘93, The unit *henry”is equivalent to
A
B,Volt/second
© Ohm
D. Ampere-vot/second
‘94. The units of magnetization are
A Ampere
8, Ampere-meter
C.Ampereemeter2
95, The resistance ofthe primary col of a well-designed,
41:10 step-down transformer is 1 ohm. With the
secondary circuit open, the primary is connected to @
12V ac generator. The primary curent i
A
About 12.
About 120.8
1. Depends on the actual number of turns in the
primary coil
196. The primary of a 3:1 step-up transformer is connected
10. source and the secondary is connected to a resstor
2, The power dssipated by & inthis situation is P. IF
's connected directly to the source it will dissipate @
power of
A PID
a PB
cP
3. 3P
97, The main reason that aerating current replaced
direct current for general use is
‘ac generators do not need sip rings
aC voltages may be convenientty transformed
electric clocks do not work on de
2 glven ac current does not heat a powerline
as much asthe same de current
one98, Which ofthe following causes non-uniform distribution
of current
1 Skin effect
Tl _ Proximity effect
“A. Bath T and II cause non-uniform distribution of
current
B, Neither I and II cause non-uniform distribution
of current
(C.. Both I and II cause uniform cistribution of
current
DL Only I cause the uniformity of current
99, Find the insulation resistance of a Lkm cable having @
‘conductor diameter of 1.Sem, insulation thickness of
1.5cm and the insulation resistivity of 2860 x 109
cohm-meters.
‘A, 600 M ohms
B. 700 Mohms
500 M ohms
D. 450M ohms
100. The core loss in the iron core of a transformer is 500
‘watts at 25H2 and 1,400 watts at SOHz both with same
‘maximum flux densty. Find the eddy current loss at
SoH in watts.
A. 400
8, 600
C800
D. 300