Cucina Mixer

HR 1560
HR 1560/B
HR 1561
HR 1561/B

Service Manuals 4322 277 00372 and 4322 277 00375

Philips Domestic Appliances and Personal Care are herewith cancelled

Service Manual
PRODUCT INFORMATION SERVICE INFORMATION
HR 1560/61 : 3 speed mixer + turbo Mounting gearwheels
HR 1560/61/B When mounting the gearwheels make sure that the cams of
Weight appliance : 1000 gr the gearwheels are situated at the front of the beaters.
Colour appliance : Ivory - Blue The angle between the beaters must 45°.
Dimensions : 180 x 90 x 160 mm So when carrying out a repair be sure that the gearwheels
are mounted correctly (see Fig. 1).
Motor : Serles wound
Statically and dynamically
balanced 90˚
Self lubricated 45˚

Transmission ratio
between rotor spindle
and gearwheel : 21½ : 1
Power HR 1560/61 : 220 Watt 220-240 V, 50-60 Hz Fig. 1
HR 1660/61/B : 350 Watt 220-240 V, 50-60 Hz
Cordlength : 1,5 m Lubrication
Speeds beaters : Switch position 1 860 rpm Use graphite grease code no. 4822 390 20004 to grease the
Switch position 2 750 rpm appliance on the following points:
Switch position 3 900 rpm 1. Spaces between the teeth of the wormwheels.
Turbo position 1000 rpm 2. Both sides of the wormwheel shaft.

Motor
F1 F2 L1 L2 F3 F4 F5
M The motor cannot operate properly when, due to
C2 C3 contamination, carbon brush is unable to move freely in
guide bush and consequently cannot be pressed against the
commutator.

0
1 2
3 0
1 2
3 Type plate : HR 1560/61
or
Speed-
selector
HR 1560/61/B
Turbo
C1

R1

MAINS

Published by Philips Domestic Appliances and Personal Care Printed in the Netherlands © Copyright reserved Subject to modification

4322 277 00918

02/04
HR 1560
A
HR 1560/B
HR 1561
7
HR 1561/B
3
A

2
1
5
6

9 10 11 12

1 4203 065 62620 Housing assy

2 4203 065 62730 Gearwheel
3 4203 065 62630 Innerparts HR 1560/61
and HR 1560/61/B
4 4822 466 12248 Motor buffer
5 4822 122 31175 Capacitor
6 4203 065 62770 Connecting piece (set)
7 4203 065 62690 Combi switch HR 1560/61 - 220 W
4203 065 64331 Combi switch HR 1560/61/B - 350 W
8 4203 065 62640 Cordset assy
13
9 4203 065 62580 Kneading hooks in pair
10 4203 065 62570 Wire beaters in pair
11 4203 065 62560 Strip beaters in pair
12 4203 065 62590 Pureeing acc. (opt.)
13 4203 065 62840 Storage box
(HR 1561 and HR 1561/B)
A Torx screws