JIS Fittings

The Fitting Authority

4300 Catalog JIS Fittings

F3T4 PNMT4 FNMT4 V3T4 C3T4

BSPT / 30° Flare Plug Cap BSPT / 30° Flare BSPT / 30° Flare

JIS

30° Flare

S
JI
JIS

I4 I4 I4 I4 I4
F3P4 HP4 G3P4 PNMP4 F63P4
BSPT / 60° Cone Union BSPT / 60° Cone Plug 60° Swivel / BSPT

60° Cone JIS JIS JIS JIS

I4 I5 I5 I5 I5
G63P4 HP46 FNMP4 C3P4 V3P4
60° Swivel / BSPT Union Swivel Cap BSPT / 60° Cone BSPT / 60° Cone

JIS

S
JI
JIS JIS

I5 I5 I6 I6 I6
P47OMN JIS B2351 O-Ring
Hex Head Plug

B2351 Port JIS

I6 I6

I2 Parker Hannifin Corporation

Tube Fittings Division
Columbus, Ohio
www.parker.com/tfd
4300 Catalog JIS Fittings

Introduction
Parker introduced Japanese Industrial Standard (JIS) adapt-
ers in the early 1990s to address market requirements for OEM
and replacement fittings. These fittings are typically used as
hose adapters on equipment designed and/or manufactured
in Japan and Korea. Parker’s JIS adapters are designed with
30° flare and 60° cone connections and typically incorporate
BSP threads.
Parker JIS adapters are designed with BSPP and BSPT port
ends and two styles of hose ends: T4 (30° flare, BSPP threads)
and P4 (60° cone, BSPP threads). Two additional Parker
series of fittings, KA (Komatsu flare) and K4 (BS B5200) adapt-
ers, are similar to JIS style fittings and appear in section J and
section K of this catalog.
The T4 and P4 interfaces provide end user flexibility of con-
necting to the most common Parker hose ends available as Fig. I1 – JIS T4 and P4 Interfaces
listed in Table I1.
Parker’s JIS adapter offering that uses the BSPP port connec-
tion are manufactured in accordance with the JIS B2351 type
“O” port connection which is commonly used for higher pres-
sure systems. Fig. I2 illustrates this port connection and Table
I2 shows appropriate JIS B2351 O-rings and dash sizes.
Adapter Mating Parker Hose
It should be noted that Parker offers two very similar cone style Connection End Fitting Series
BSPP adapters — P4 and K4. Parker’s K4 (60 cone, BSPP) P4 / P46 UT, GU, G1, G2
fittings conform to BS5200, while Parker’s JIS cone adapters T4 / T46 FU
meet JIS B8363 specifications. These fittings, while very
similar, are not interchangeable. See the K4 section of this Table I1 – Parker JIS Fittings Hose
catalog for more specific information on interchangeability. Adaptability

Design and Construction

“G” Thread Port
Construction: Shaped JIS adapters are manufactured from BSPP per O-Ring
a hot forged construction. Straight adapters are manufactured JIS
O-Ring ISO 228-1 Dash (See
from cold drawn barstock. JIS B 0202 Size Pg. I 6)
JIS B0202 1/8-28 2 P8
Threads: The standard JIS products are manufactured with (BSPP)
the thread forms listed below: 1/4-19 4 P11
Threads
3/8-19 6 P14
BSPP Threads: ISO 228-1 G, JIS B 0202, 1/2-14 8 P18
BSPT Threads: ISO 7/1, JIS B 0203 3/4-14 12 P24
1-11 16 P29
Identification: All Parker JIS fittings are stamped with “JIS” for
positive identification and differentiation from similar style Fig. I2 – JIS B2351 Type Table I2 – JIS B2351 Port
fittings. “O” Port Connection Threads and O-Rings as
shown in Fig. I2

Materials Specifications
JIS fitting components are manufactured using state-of-the-art Steel
equipment and manufacturing technologies to assure con- JIS Adapters
ASTM Type
struction integrity, highest strength, long service life and the
highest quality. These materials are shown in Table I3. Forged Bodies A576 1214/1215
Bar Stock Bodies A108 12L14
Upon request, JIS fittings can be furnished in materials other
than Parker’s standard steel offering. Table I3 – Standard Material
Specifications for Parker Japanese
Industrial Standard (JIS) Fittings

I3 Parker Hannifin Corporation

Tube Fittings Division
Columbus, Ohio
www.parker.com/tfd
4300 Catalog JIS Fittings

L L
F3T4 Full Dimensions PNMT4 How to
Male Connector 2 JIS
1
30°
Plug 1 30° Order
30° Flare / BSPT 30° Flare H
H
Mates with FU Style hose fittings Mates with FU Style hose fittings
Specs

STANDARD STANDARD
Dynamic END Dynamic
TUBE END SIZE H Pressure TUBE SIZE H Pressure
(x 1,000 PSI) (x 1,000 PSI) Assembly /
FITTING 1 2 HEX L FITTING 1 HEX L
Installation
PART # BSPP BSPT (in.) (in.) -S PART # BSPP (mm) (in.) -S
4F3T4 1/4-19 1/4-19 0.75 1.46 5.0 4PNMT4 1/4-19 17 0.89 5.0
4-6F3T4 1/4-19 3/8-19 0.88 1.51 5.0 6PNMT4 3/8-19 19 0.97 5.0
6-4F3T4 3/8-19 1/4-19 0.88 1.59 5.0 8PNMT4 1/2-14 22 1.11 5.0
6F3T4 3/8-19 3/8-19 0.88 1.59 5.0 12PNMT4 3/4-14 30 1.26 4.0 Reference
8-6F3T4 1/2-14 3/8-19 1.06 1.70 5.0 16PNMT4 1-11 36 1.30 3.0
8F3T4 1/2-14 1/2-14 1.06 1.89 5.0
12F3T4 3/4-14 3/4-14 1.44 2.10 4.0
16F3T4 1-11 1-11 1.63 2.30 3.0

°
FNMT4 V3T4

30
1 Full Dimensions L5
1
30°
Cap 45° Male Elbow U*

S
JI
H
30° Flare 30° Flare / BSPT L4

Mates with FU Style hose fittings 2

* Across wrench flats

STANDARD STANDARD
END Dynamic Dynamic
TUBE SIZE H Pressure TUBE END SIZE Pressure
FITTING 1 HEX (x 1,000 PSI) FITTING 1 2 L4 L5 U (x 1,000 PSI)
PART # BSPP (in.) -S PART # BSPP BSPT (in.) (in.) (in.) -S
4FNMT4 1/4-19 0.75 5.0 4V3T4 1/4-19 1/4-19 0.75 0.87 0.56 5.0
6FNMT4 3/8-19 0.88 5.0 6V3T4 3/8-19 3/8-19 0.87 0.97 0.75 5.0
8FNMT4 1/2-14 1.06 5.0 8V3T4 1/2-14 1/2-14 1.06 1.10 0.88 5.0
12FNMT4 3/4-14 1.44 4.0 12V3T4 3/4-14 3/4-14 1.18 1.24 1.06 4.0
16FNMT4 1-11 1.63 3.0 16V3T4 1-11 1-11 1.37 1.26 1.31 3.0

L2
C3T4 Full Dimensions U* JIS
30°
F3P4 Full Dimensions L

Male Elbow 1 Male Connector 2

JIS
1
30°
30° Flare / BSPT L1 60° Cone / BSPT
H
Mates with FU Style hose fittings 2 Mates with GU, G1 and G2 Style hose fittings
* Across wrench flats

STANDARD
STANDARD Dynamic
Dynamic END SIZE Pressure
TUBE H
TUBE END SIZE Pressure (x 1,000 PSI)
FITTING 1 2 HEX L
FITTING 1 2 L1 L2 U (x 1,000 PSI)
PART # BSPP BSPT (in.) (in.) -S
PART # BSPP BSPT (in.) (in.) (in.) -S 1/4-19 1/4-19 0.75 1.44 5.0
4F3P4
4C3T4 1/4-19 1/4-19 1.00 0.98 0.56 5.0 3/8-19 3/8-19 0.88 1.50 5.0
6F3P4
6C3T4 3/8-19 3/8-19 1.18 1.14 0.75 5.0 8F3P4 1/2-14 1/2-14 1.06 1.81 5.0
8C3T4 1/2-14 1/2-14 1.42 1.33 0.88 5.0 3/4-14 3/4-14 1.44 2.05 4.0
12F3P4
12C3T4 3/4-14 3/4-14 1.69 1.50 1.06 4.0 16F3P4 1-11 1-11 1.63 2.28 3.0
16C3T4 1-11 1-11 1.97 1.74 1.31 3.0

I4 Parker Hannifin Corporation

Tube Fittings Division
Columbus, Ohio
www.parker.com/tfd
4300 Catalog JIS Fittings

L L
HP4 Full Dimensions
JIS
G3P4 Full Dimensions
How to
2 1 2 JIS
1
Union 30° Typ.
Female Connector 30°
Order
60° Cone H 60° Cone / BSPT
H

Mates with GU, G1 and G2 Style hose fittings Mates with GU, G1 and G2 Style hose fittings
Specs

STANDARD STANDARD
Dynamic Dynamic
TUBE END SIZE H Pressure TUBE END SIZE H Pressure
(x 1,000 PSI) FITTING HEX (x 1,000 PSI) Assembly /
FITTING 1 2 HEX L 1 2 L
Installation
PART # BSPP BSPP (in.) (in.) -S PART # BSPP BSPT (in.) (in.) -S
4HP4 1/4-19 1/4-19 0.75 1.34 5.0 4G3P4 1/4-19 1/4-19 0.75 1.22 5.0
6HP4 3/8-19 3/8-19 0.88 1.50 5.0 6G3P4 3/8-19 3/8-19 0.88 1.34 5.0
8HP4 1/2-14 1/2-14 1.06 1.81 5.0 8G3P4 1/2-14 1/2-14 1.06 1.58 5.0
12HP4 3/4-14 3/4-14 1.44 2.05 4.0 12G3P4 3/4-14 3/4-14 1.44 1.73 4.0 Reference
16HP4 1-11 1-11 1.63 2.28 3.0 16G3P4 1-11 1-11 1.63 1.93 3.0

PNMP4 1 F63P4 Full Dimensions L

30° 1
JIS
2
Plug H
Swivel Male Connector
60° Cone 60° Swivel / BSPT H1

Mates with GU, G1 and G2 Style hose fittings Mates with UT Style hose fittings

STANDARD STANDARD
END Dynamic Dynamic
TUBE SIZE H Pressure TUBE END SIZE H1 Pressure
FITTING 1 HEX (x 1,000 PSI) FITTING 1 2 HEX L (x 1,000 PSI)
PART # BSPP (mm) -S PART # BSPP BSPT (in.) (in.) -S
4PNMP4 1/4-19 17 5.0 4F63P4 1/4-19 1/4-19 0.75 1.73 5.0
6PNMP4 3/8-19 19 5.0 6F63P4 3/8-19 3/8-19 0.88 1.94 5.0
8PNMP4 1/2-14 22 5.0 8F63P4 1/2-14 1/2-14 1.06 2.25 5.0
12PNMP4 1/2-14 30 4.0 12F63P4 3/4-14 3/4-14 1.44 2.55 4.0
16PNMP4 1-11 36 3.0 16F63P4 1-11 1-11 1.63 2.77 3.0

G63P4 Full Dimensions L

HP46 Full Dimensions L
JIS
JIS
Swivel Female Connector 1 2 Swivel Union Connector 1 2

60° Swivel / BSPT H1

60° Swivel
H1

Mates with UT Style hose fittings Mates with UT Style hose fittings

STANDARD STANDARD
Dynamic Dynamic
TUBE END SIZE H1 Pressure TUBE END SIZE H1 Pressure
FITTING 1 2 HEX L (x 1,000 PSI) FITTING 1 2 HEX L (x 1,000 PSI)
PART # BSPP BSPT (in.) (in.) -S PART # BSPP BSPP (in.) (in.) -S
4G63P4 1/4-19 1/4-19 0.75 1.61 5.0 4HP46 1/4-19 1/4-19 0.75 2.12 5.0
6G63P4 3/8-19 3/8-19 0.88 1.78 5.0 6HP46 3/8-19 3/8-19 0.88 2.37 5.0
8G63P4 1/2-14 1/2-14 1.06 2.02 5.0 8HP46 1/2-14 1/2-14 1.06 2.73 5.0
12G63P4 3/4-14 3/4-14 1.44 2.20 4.0 12HP46 3/4-14 3/4-14 1.44 2.96 4.0
16G63P4 1-11 1-11 1.63 2.52 3.0 16HP46 1-11 1-11 1.63 3.24 3.0

I5 Parker Hannifin Corporation

Tube Fittings Division
Columbus, Ohio
www.parker.com/tfd
4300 Catalog JIS Fittings

H L3
FNMP4 1
C3P4 Full Dimensions U* JIS
1 How to
30°
Cap 90° Male Elbow 30° Order
60° Cone 60° Cone / BSPT L1

Mates with UT Style hose fittings Mates with GU, G1 and G2 2

* Across wrench flats
Style hose fittings Specs

STANDARD STANDARD
END Dynamic Dynamic
TUBE SIZE H Pressure TUBE END SIZE Pressure Assembly /
FITTING HEX (x 1,000 PSI) FITTING 1 2 L1 L3 U (x 1,000 PSI) Installation
1
PART # BSPP (in.) -S PART # BSPP BSPT (in.) (in.) (in.) -S
4FNMP4 1/4-19 0.75 5.0 4C3P4 1/4-19 1/4-19 1.00 0.96 0.56 5.0
6FNMP4 3/8-19 0.88 5.0 6C3P4 3/8-19 3/8-19 1.18 1.14 0.75 5.0
8FNMP4 1/2-14 1.06 5.0 8C3P4 1/2-14 1/2-14 1.42 1.28 0.88 5.0 Reference
12FNMP4 3/4-14 1.44 4.0 12C3P4 3/4-14 3/4-14 1.69 1.56 1.06 4.0
16FNMP4 1-11 1.63 3.0 16C3P4 1-11 1-11 1.97 1.74 1.31 3.0

L
V3P4 Full Dimensions L6 1 P47OMN XX
°
30

U* JIS
45° Male Elbow Plug 1
S
JI

60° Cone / BSPT L4

Hex head plug for JIS B2351 H

Mates with GU, G1 and G2 2

Style hose fittings

STANDARD STANDARD
Dynamic END Dynamic
TUBE END SIZE Pressure TUBE SIZE H Pressure
FITTING 1 2 L4 L6 U (x 1,000 PSI) FITTING 1 HEX L XX (x 1,000 PSI)
PART # BSPP BSPT (in.) (in.) (in.) -S PART # BSPP (mm) (mm) (mm) -S
4V3P4 1/4-19 1/4-19 0.75 0.81 0.56 5.0 4P47OMN 1/4-19 19 19.1 7.9 5.0
6V3P4 3/8-19 3/8-19 0.87 0.91 0.75 5.0 6P47OMN 3/8-19 22 20.0 8.8 5.0
8V3P4 1/2-14 1/2-14 1.06 1.05 0.88 5.0 8P47OMN 1/2-14 27 24.1 9.6 5.0
12V3P4 3/4-14 3/4-14 1.18 1.18 1.06 4.0 12P47OMN 3/4-14 36 26.9 12.4 4.0
16V3P4 1-11 1-11 1.37 1.30 1.31 3.0 16P47OMN 1-11 41 31.0 12.5 3.0

JIS B2351 O-Ring W

O-Ring
I.D.
90 durometer, Nitrile

TUBE JIS T4
FITTING DASH THREAD I.D. W JIS B 2401
PART # SIZE BSPP (mm) (mm) DESCRIPTION
P8 O-RING 2 1/8-28 7.8 1.9 O-RING CLASS 1 B P 8
P11 O-RING 4 1/4-19 10.8 2.4 O-RING CLASS 1 B P 11
P14 O-RING 6 3/8-19 13.8 2.4 O-RING CLASS 1 B P 14
P18 O-RING 8 1/2-14 17.8 2.4 O-RING CLASS 1 B P 18
P24 O-RING 12 3/4-14 23.7 3.5 O-RING CLASS 1 B P 24
P29 O-RING 16 1-11 28.7 3.5 O-RING CLASS 1 B P 29

I6 Parker Hannifin Corporation

Tube Fittings Division
Columbus, Ohio
www.parker.com/tfd