Certificate of Product Approval
Certificate Number: 077f Issue: 09
PRYSMIAN CABLE & SYSTEMS LIMITED
Chickenhall Lane
Bishopstoke
Eastleigh
Hants
SO50 6YU
United Kingdom
is authorised to use the LPCB mark in association with the product(s) listed in this certificate and appendix
having complied with the requirements of the standard(s) detailed below:
Product(s) Standard(s) (see Appendix for details)
Cable Types as listed below: BS 7629-1:2015 (STANDARD 30 & 60)
FP200 Gold BS 6387:2013 (CWZ)
EN 50200:2015 (Class PH120)
EN 50200:2015 Annex E (30 mins)
BS 5839-1:2013 (Clause 26.2d Standard)
This Certificate is maintained and held in force through regular surveillance activities and subject to the
corresponding ISO 9001 Certificate being maintained.
Obada Piracha 23 December 2020 14 August 2003
Signed for BRE Global Ltd. Certification Scheme Manager Date of Issue Date of First issue
This certificate and appendix remain the property of BRE Global Ltd. and is issued
subject to terms and conditions (for details visit www.redbooklive.com/terms).
To check the validity of this certificate and appendix please visit
www.redbooklive.com/check, scan the QR tag or contact us.
BRE Global Ltd, Garston, Watford, WD25 9XX
T: +44 (0)333 321 8811 E: [email protected]
LPCB® is a registered trademark of the Building Research Establishment Ltd.
BF1345 Rev 2.1 Page 1 of 2 © BRE Global Ltd, 2020
Appendix to Certificate No: 077f Issue: 09
PRYSMIAN CABLE & SYSTEMS LIMITED
LPCB Ref.
Product name
No.
FP200 Gold 077f/01
Core EN 5839-1
Nominal csa of Construction BS 7629-1 EN 50200 Annex E
BS 6387 EN 50200 clause 26.2d
conductor (mm2) (excluding drain (see note 4) (see note 5)
wire and earth) (see note 6)
1.0(1) 2 STANDARD 30 C, W, Z PH60 30 min Standard
1.5(2) 2, 3 & 4 STANDARD 60 C, W, Z PH120 30 min Standard
2.5(2) 2, 3 & 4 STANDARD 60 C, W, Z PH120 30 min Standard
4.0(3) 2, 3 & 4 STANDARD 60 C, W, Z PH120 30 min Standard
Uo/U 300/500 V
Notes:
1. Solid conductors only.
2. Solid and stranded conductors.
3. Stranded conductor only.
4. In meeting the requirements of BS 7629-1:2015, the FP200 Gold cables listed met the requirements for smoke density of
EN 61034-2:2005+A1:2013, and achieved less than 0.5% HCl for the insulation, binder tape and outer covering when
tested in accordance with EN 60754-1:2014 and in addition also met the fire resistance requirements of BS 6387:2013
Categories CWZ.
5. The duration of 30 minutes when tested in accordance with EN 50200:2015 Annex E is achieved by 15 minutes for the fire
and mechanical shock phase and a further 15 minutes for the fire, mechanical shock and water phase.
6. The FP200 Gold cables listed conform to BS 7629-1:2015 achieving Category STANDARD 30 & 60 and hence met the
requirements for a standard fire-resistant cable as described in Clause 26.2d of BS 5839-1:2013.
This Certificate is maintained and held in force through regular surveillance activities and subject to the
corresponding ISO 9001 Certificate being maintained.
Obada Piracha 23 December 2020 14 August 2003
Signed for BRE Global Ltd. Certification Scheme Manager Date of Issue Date of First issue
This certificate and appendix remain the property of BRE Global Ltd. and is issued
subject to terms and conditions (for details visit www.redbooklive.com/terms).
To check the validity of this certificate and appendix please visit
www.redbooklive.com/check, scan the QR tag or contact us.
BRE Global Ltd, Garston, Watford, WD25 9XX
T: +44 (0)333 321 8811 E: [email protected]
LPCB is a registered trademark of the Building Research Establishment Ltd.
BF1345 Rev 2.1 Page 2 of 2 © BRE Global Ltd, 2020
