How to connect WECSPlorerUT
For training use only
1 © Wärtsilä 07 March 2013 WLSA-Korea Rev. 01
Wärtsilä Automation Tools
The following equipment is needed:
1) WECSplorerUT(material nr 007370318) software with the correct UZP and
Operator level
2) Standard Ethernet (LAN) Cable
3) Kvaser
K L f Professional
Leaf P f i l USB-to-CAN(material
USB t CAN( t i l nr PAAE081919)
4) CAN extension cable is needed (0050T004001)
2 © Wärtsilä 07 March 2013 WLSA-Korea Rev. 01
For training use only
TCP/IP Connection
1. Connect you laptop Ethernet socket to any spare Ethernet socket on LCP.
LAN PORT
3 © Wärtsilä 07 March 2013 WLSA-Korea Rev. 01
For training use only
TCP/IP Connection
1. Connect you laptop Ethernet socket to any spare Ethernet socket on UCP.
Ethernet(LAN) Cable
LAN PORT
4 © Wärtsilä 07 March 2013 WLSA-Korea Rev. 01
For training use only
CAN Connetion(Kvaser Leaf Professional USB-to-CAN)
D-9 sub
USB PORT
CAN extension cable
5 © Wärtsilä 07 March 2013 WLSA-Korea Rev. 01
For training useProfessional
Kvaser Leaf only USB-to-CAN