Formulation
Name FOAMING BUBBLE BATH
No. 1076
Description This formulation provides light, lacy foam with good skin after-feel.
Formulation INGREDIENTS: % by Weight Functionality
Deionized Water q.s. to 100.0 Solvent
Glycerin (Uniqema) 0.5 Humectant
Mackernium 007 (Solvay) Polyquaternium-7 0.2 Conditioning Agent
BIO-TERGE® AS-40 (or BIO-TERGE® AS-40 HP) 38.5 Primary Surfactant
STEPAN-MILD® L3 2.0 Secondary Surfactant
Hydrotriticum 2000 (Croda), Hydrolyzed Whole Wheat Protein 0.2 Additive
Preservative, Dye, Fragrance q.s. Additive
Sodium Hydroxide, 50% solution q.s. pH Modifier
Citric Acid, 50% solution q.s. pH Modifier
Sodium Chloride q.s. Viscosity Modifier
___________
Total 100.0
Procedure 1. In a suitable container, combine Deionized Water, Glycerin, Mackernium 007, BIO-TERGE®
AS-40 (or BIO-TERGE® AS-40 HP), and STEPAN-MILD® L3. Mix until clear.
2. Add Hydrotriticum 2000. Mix well.
3. Add Preservative, Dye, and Fragrance. Mix.
4. Adjust pH with Sodium Hydroxide, 50% solution or Citric Acid, 50% solution and adjust viscosity
with Sodium Chloride.
*Note: When formulating with BIO-TERGE® AS-40 HP, a greater amount of Citric Acid, 50%
solution, may be needed to adjust the pH within the recommended range as noted, than when
formulating with BIO-TERGE® AS-40.
Physical Appearance at 25ºC Clear liquid
Properties pH, as is 5.8-6.5
Viscosity at 25ºC, cps 1,500-2,000
Instructions Squeeze bubble bath into stream of running water as tub fills up.
for Use
Registered BIO-TERGE®
Trademarks STEPAN-MILD®
of Stepan
Company
For For applications or product handling assistance, call our Technical Service Department at 1-800-745-7837 (U.S.) or
011-334-76-505-100 (Europe).
Additional For ordering assistance, call our Account Service Department at 1-800-457-7673.
Assistance
The information contained herein is based on the manufacturer’s own study and the works of others and is subject to
change without prior notice. The information is not intended to be all-inclusive, including as to the manner and
conditions of use, handling, storage or disposal or other factors that may involve additional legal, environmental,
safety or performance considerations. Nothing contained herein grants or extends a license, express or implied, in
connection with any patents issued or pending of the manufacturer or others, or shall be construed as a
recommendation to infringe any patents. STEPAN COMPANY MAKES NO PRODUCT WARRANTY OF
MERCHANTABILITY OR OF FITNESS FOR A PARTICULAR USE, EXPRESS OR IMPLIED, AND NO OTHER
WARRANTY OR GUARANTY, EXPRESS OR IMPLIED, IS MADE, INCLUDING AS TO INFORMATION
REGARDING PERFORMANCE, SAFETY, SUITABILITY, STABILITY, ACCURACY, COMPLETENESS, OR
ADEQUACY. Stepan Company (and its employees, subsidiaries and affiliates) shall not be liable (regardless of fault)
to the vendee, its employees, or any other party for any direct, indirect, special or consequential damages arising out
of or in connection with the accuracy, completeness, adequacy, furnishing, use, or reliance upon information
provided herein. The vendee assumes and releases Stepan Company (and its employees, subsidiaries and
affiliates) from all liability, whether in tort, contract or otherwise to the fullest extent possible under the relevant law.
Stepan
Stepan Company
Northfield, Illinois 60093
Telephone (847) 446-7500
Revision Date: 03/27/2020 Publication Date: 04/22/2008 © 2020, Stepan Company. All rights reserved.
