0% found this document useful (0 votes)

155 views39 pages

IH Series Chemical Pump Catalog

The document discusses IH series single-stage end-suction centrifugal chemical pumps. It provides an overview of the pumps' characteristics including wide performance range, high efficiency, ability to transport corrosive liquids similar to water, and operating temperature range of -20°C to 105°C. The manufacturer reserves the right to make changes to technical specifications without external reference.

Uploaded by

christian marroquin flores

We take content rights seriously. If you suspect this is your content, claim it here.

Available Formats

Download as PDF, TXT or read online on Scribd

0% found this document useful (0 votes)

155 views39 pages

IH Series Chemical Pump Catalog

Uploaded by

christian marroquin flores

We take content rights seriously. If you suspect this is your content, claim it here.

Available Formats

Download as PDF, TXT or read online on Scribd

You are on page 1/ 39

TECHNICAL DATA INCLUDED IN THIS BROCHURE MAY BE CHANGE FROM TIME

TO TIME DUE TO THE PRODUCT IMPROVEMENTS UNDERTAKES BY THE

MANUFACTURER. THE COMPANY RESERVES THE UNCONDITIONAL RIGHTS TO
IMPLEMENT SUCH CHANGES WITHOUT REFERENCE TO THIRD PARTIES.

ShangHai HanThing pump Co.,ltd

Website: www.hanthing.com
Address: NO.566, Tongli road, songjiang district, Shanghai, China
Mobile: +86-021-56550238
Email: [email protected]
IH/IHH/IHF系列立化工泵
IH/IHH/IH Series Chemical Pump
Product Catalog 2020
IH Single Stage Chemical Pump

概述Ｏｖｅｒｖｉｅｗ
IH ( ) ， IH model chemical pump is single-stage end-suction
(axial suction) cantilever type centrifugal pump, which is used
、 !、"#$%&'()
目录ＣＯＮＴＥＮＴＳ。+,-、./!0123456789,:ISO2858，
to transport corrosive liquid with viscosity similar to water
and without solid particles. The marked and rated performances
!0;<=、5>?、“@”'A?1BCDE and dimensions adopt ISO2858 international standard. It has
4FG，+5>HFAIJ?5％，8LM=(N such charact e r i s t i c s a s w i d e ra n g e of performance, high
efficiency, high mechanical, chemical and physical level and
0OP。
1 convenient maintenance etc. It is energy saving type product
IHQRS#T-20℃～105℃，WXY
Overview recommended by the nation with its efficiency being 5% greater
67Z[\]^_?S#(QR，`7&、a than that of F model pump.
1
Range of performance b、cd、ef、gh、iP、jk1lmnB4op The temperature of transported media of IH model chemical

1 7&qr !(stuvw($%&'(QR。 pump is -20℃ ～105℃. Through adopting cooling method, it
Model meaning can transport media with higher temperature if necessary, and
is applied to transport various corrosive media or media in
2
Structures description which pollution is forbidden similar to water in such industries
as chemical industry, petroleum, metallurgy, electric power,
3
papermaking, food, pharmacy and synthetic fiber etc.
Structure drawing

4
Atlas of style 性能范围Ｒａｎｇｅｏｆｐｅｒｆｏｒｍａｎｃｅ
IH 5 3 3
IH Type pump performance z{：6.3～400m /h； Capacity：6.3～400m /h；
~：5～125m； Head：5～125m；
11
Dimension diagram
Speed：2900r/min and1450r/min；
：2900r/min11450r/min；
Power of fitted motor：0.55～90kW；
11 >：0.55～90kW； Inlet diameter：50～200mm；
Dimension table
：50～200mm； The highest work pressure：1.6MPa。
12 IH model pumps are classified as 29 basic types, among
Input & output flange diagram
?f：1.6MPa。
which, 22 two-speed (2900, 1450r/min) types being
IH29，+22(2900、1450
12 transformed after cut by the impeller diameter of A and B
Input & output flange size table r/min)A、Br(， models, the total specifications can be 112.
! 13 112。
Installation and Outline Figures

! 13
Installation dimension 型号意义Ｍｏｄｅｌｍｅａｎｉｎｇ
"#!$%'( 18
Water pump assembly and disassembly IH 50 - 32 - 160 A
"# ! 18
Water pump installation Impeller though first-cutting
"#)*、,-%./ 19 (mm) Nominal diameter of pump(mm)
Water pump start, stop and work
(mm) Outlet diameter of pump(mm)
01234567 20
Failures causes and troubleshooting
(mm) Input diameter of pump (mm)

89:;< 21
Reference table for pipeline loss International standard single-stage end-suction chemical centrifugal pump

IH SERIES -1-
1
IH Single Stage Chemical Pump

89:;< 21
Reference table for pipeline loss International standard single-stage end-suction chemical centrifugal pump

IH SERIES -1-
1
IH Single Stage Chemical Pump

结构说明Ｓｔｒｕｃｔｕｒｅｓｄｅｓｃｒｉｐｔｉｏｎ结构简图Ｓｔｒｕｃｔｕｒｅｄｒａｗｉｎｇ

1、IH !"#$ISO%&'()*+ 1. IH model pumps are the series of products designed according
to ISO international standards in all industries in China. It
,-，/0123、、456、78、
is mainly composed of pump body, impellers, seal rings,
9、45:;、<=>?、@、A?:;BCD。
impeller nuts, pump cover, seal parts, intermediate support,
2、)FGHI：9KLMNOP<=>?Q， spindle, suspended parts and so on.
RSKL3T<=>?M)%UV9WXP 2. Structural features: the pump cover is fixed on the intermediate
<=，3@Y， YZ，[>\]，^ support, and the pump cover is clamped in the middle by
coupling between pump body and intermediate support. On
UNOP_`Q。A?:;KLMNOP<= 1 2 3 4 5 6 7 8 9
the pump body, water is input axially and output radially.
>?Q，a$A?>?>bP_`Q。cdefg，
Support feet can be fixed on the base directly. The suspended
'(hij%@k，lmn^opdeq%U parts are fixed onto the intermediate support through the
rs、3tuvw，xydzij%@k)<= rabbet, and are supported onto the base by suspended frame.
%U;，{^|}~:;q!lm。Q To make it convenient to disassemble, the prolonged coupling

K$)FG]。 is designed, so that it is unnecessary to disassemble the

coupled input & output pipes during check and maintenance.
3、)}fY：KLij%@k2uvw U
To p u m p b o d y a n d m o t o r, o n l y b y d i s a s s e m b l i n g t h e
v，uvw ，nfY}。 intermediate coupler of the prolonged coupling, users are
4、)@5]：)@5]45tw4 able to screw out rotor part for check and maintenance,

5。459'，#$ which is a conventional structural pattern in the world.

3. Rotation direction: the pump is driven by motor directly
45，^KO)，45
through a prolonged coupling, seen from the side of the motor,
、、$；w45w45 it rotates clockwise.
tw45]，45KO 4. Spindle seal patterns: spindle seal patterns of pump are of
)， ¡，¢n£¤$。 two types such as stuffing seal and mechanical seal. The
)45]#$45¥w45，2$¦ stuffing seal is that on stuffing case in pump cover, with
software stuffing for sealing, input water of a certain pressure
§¨y1©$。¢n§¨y1ª #$«&¬ISO3069
into the stuffing case, for cooling, lubrication and cleaning
O)45®¯°)/±FG)@5]，²³´µ on seal; mechanical seal is of two types such as single-surface
r)w45t¶45BB。 mechanical seal and double-surface mechanical seal, input
water of a certain pressure into the seal chamber, for washing
and cooling on the abrased surfaces.
Seal patterns of pump are of stuffing seal or mechanical
seal, according to users' requirements, in a same time, seal
chamber sizes and shaft gland patterns of other structures
according to IS O 3 0 6 9 a s r e q u i r ed, a r e a l l o w e d , such as
mechanical seals of corrugated pipes, assistant impeller seals
and so on.

1 Pump casing 4 §¨ Impeller nut 7 ¢£¤ Mid.bracket

2 Impeller 5 © Pump cover 8 shaft

3 ¡ Seal-ring 6 ¥¦ Seal part 9 ¤¥¦ Hanging stand

2
-2- IH SERIES IH SERIES 3
-3-
IH Single Stage Chemical Pump

结构说明Ｓｔｒｕｃｔｕｒｅｓｄｅｓｃｒｉｐｔｉｏｎ结构简图Ｓｔｒｕｃｔｕｒｅｄｒａｗｉｎｇ

K$)FG]。 is designed, so that it is unnecessary to disassemble the

5。459'，#$ which is a conventional structural pattern in the world.

1 Pump casing 4 §¨ Impeller nut 7 ¢£¤ Mid.bracket

2 Impeller 5 © Pump cover 8 shaft

3 ¡ Seal-ring 6 ¥¦ Seal part 9 ¤¥¦ Hanging stand

2
-2- IH SERIES IH SERIES 3
-3-
IH Single Stage Chemical Pump

型谱图ＡｔｌａｓｏｆｓｔｙｌｅＩＨ型性能参数ＩＨｔｙｐｅｐｕｍｐｐｅｒｆｏｒｍａｎｃｅ

Q Power( KW )
H(m)
n η
200

100
H

60
50

10
Capacity
2000

2000
Head Speed Eff. Weight (NPSH)r
pump type
（m）（r/min）（%）

p³·¸)¹ºn=1450r/min)ns»。
( Kg ) (m)

93 )

Without brackets, means the ns when n=1450r/min.

2
（L/s）

7
（m /h）
3

With brackets, means the ns when n=2900r/min,

n=2900t1450r/min

* ³ · ¸ ) ¹ ºn=2900r/min)ns» ，
18
Shaft power Motor power
(1

7.5 2.08 23 1.09 43 2

66 2)

1.33 2.2 51 45 2
3

12.5 3.47 20 2900

n=2900r/min

n=1450r/min
15 4.17 18 1.50 49 2.5
400 500600 800 1000

800 1000
IH50-32-125
3.75 1.04 5.75 0.16 36 2
6.3 1.75 5 1450 0.19 0.55 45 45 2
7.5 2.08 4.5 0.21 44 2.5

6.8 1.89 18.8 0.87 40 2

47 )
3

400 500600
11.3 3.14 16.4 2900 1.01 1.5 50 45 2
(9

13.6 3.78 14.7 1.16 47 2.5

IH50-32-125A
3.4 0.94 4.7 0.13 33.3 2
5.7 1.59 4.1 1450 0.15 0.55 43 45 2
6.8 1.89 3.7 0.16 42 2.5
125-100-200 200-150-400

200-150-250
200-150-315
3 6)
(6

7.5 2.08 34.5 2.13 33 2

3
300

300
12.5 3.47 32 2900 2.37 3 46 48 2
15 4.17 30 2.45 50 2.5
IH50-32-160
3.75 1.04 8.6 0.3 29 2
6.3 1.74 8 1450 0.34 0.55 40 48 2
125-100-400 150-125-400
200

200
125-100-315

2.5
125-100-250

0.36 43
100-80-160 150-125-315

7.5 2.08 7.5

100-80-125 150-125-250
=2 7)

6.8 1.89 28.5 1.76 30 2

ns (4
3

11.3 3.14 26.4 2900 1.85 3 44 48 2

13.6 3.78 24.8 1.91 48 2.5
IH50-32-160A
3.4 0.94 7.1 0.25 25.9 2
5.7 1.58 6.6 1450 0.28 0.55 37.1 48 2
125-100-250
125-100-315
80 100

80 100
125-100-200
100-65-200

6.8 1.89 6.2 0.28 41 2.5

100-65-250
100-65-315
3)
(3

7.5 2.08 51.8 3.78 28 2

12.5 3.47 50 2900 4.36 5.5 39 58 2

Q(m \h)
15 4.17 48 4.56 43 2.5

3
IH50-32-200
40 50 60

40 50 60
3.75 1.04 12.9 0.57 23 2
6.3 1.75 12.5 1450 0.65 1.1 33 58 2
100-65-250
100-65-315

100-80-125
100-80-160
100-65-200
80-65-125

2.5
80-65-160

7.5 2.08 12 0.68 36

80-50-250
80-50-315

80-50-200
3)

6.8 1.89 42.7 3.16 25 2

2
s=

11.3 3.14 41 2900 3.24 4 38 58 2

13.6 3.78 39.5 3.57 41 2.5

IH50-32-200A
30

30
3.4 0.94 10.6 0.49 20 2
5.7 1.58 10.3 1450 0.52 0.75 31 58 2
80-50-250
65-50-125
80-50-315
65-50-160

6.8 1.89 9.9 0.54 34 2.5

80-65-160
80-50-200

80-65-125
65-40-200
65-40-250
65-40-315
20

7.5 2.08 82 7.28 23 2

12.5 3.47 80 2900 8.25 11 33 92 2
15 4.17 78.5 8.79 36.5 2.5
IH50-32-250
3.75 1.04 20.5 1.23 17 2
7
18

6.3 1.75 20 1450 1.27 2.2 27 92 2

65-40-250
50-32-125

7.5 2.08 19.6 1.29 31 2.5

65-40-200

65-40-160

65-50-125
50-32-100
65-40-315
10

7 1.94 71.9 6.84 20 2

50-32-250

50-32-200

11.7 3.25 70 2900 6.97 11 32 92 2

14 3.89 68.8 7.71 34 2.5
8

IH50-32-250A
3.51 0.98 18 1.12 15.4 2
2
13

5.9 1.64 17.5 1450 1.25 1.5 25 92 2

7.02 1.95 17.2 1.18 27.9 2.5

50-32-250

50-32-200

50-32-125
50-32-160
5

6.6 1.83 63.6 5.71 20 2

IH50-32-250B 11 3.06 62 2900 6.19 7.5 30 92 2
)

60.9 6.64 33 2.5

93 (187

13.2 3.67
4

15 4.17 21.3 1.85 47 2

25 6.94 20 2900 2.2 3 62 46 2
3

30 8.33 18.6 2.41 63 2.5

3)
=2

IH65-50-125
3
(33

ns )
(47
=2
(ns

0.25 44 2
2)

2.08 5.4
47 )

7.5
(93
33 )

66
(66

(13

12.5 3.47 5 1450 0.31 0.55 55 46 2

15 4.17 4.5 0.33 56 2.5
2

2
200

100
H(m)

60
50

2
8

3
5

H(m) ª：«¬®( >¯QRT'(>，^°±7²QR(³#1"#´，7´>(eµ。

Note: The spindle powers listed above is as the powers calculated with water as its medium, motors of various powers can be used according to gravity and viscidity
of users' various media transferred.

4 IH SERIES IH SERIES 5
-5-
IH Single Stage Chemical Pump

型谱图ＡｔｌａｓｏｆｓｔｙｌｅＩＨ型性能参数ＩＨｔｙｐｅｐｕｍｐｐｅｒｆｏｒｍａｎｃｅ

Q Power( KW )
H(m)
n η
200

100
H

60
50

10
Capacity
2000

2000
Head Speed Eff. Weight (NPSH)r
pump type
（m）（r/min）（%）

p³·¸)¹ºn=1450r/min)ns»。
( Kg ) (m)

93 )

Without brackets, means the ns when n=1450r/min.

2
（L/s）

7
（m /h）
3

With brackets, means the ns when n=2900r/min,

n=2900t1450r/min

* ³ · ¸ ) ¹ ºn=2900r/min)ns» ，
18
Shaft power Motor power
(1

7.5 2.08 23 1.09 43 2

66 2)

1.33 2.2 51 45 2
3

12.5 3.47 20 2900

n=2900r/min

n=1450r/min
15 4.17 18 1.50 49 2.5
400 500600 800 1000

800 1000
IH50-32-125
3.75 1.04 5.75 0.16 36 2
6.3 1.75 5 1450 0.19 0.55 45 45 2
7.5 2.08 4.5 0.21 44 2.5

6.8 1.89 18.8 0.87 40 2

47 )
3

400 500600
11.3 3.14 16.4 2900 1.01 1.5 50 45 2
(9

13.6 3.78 14.7 1.16 47 2.5

IH50-32-125A
3.4 0.94 4.7 0.13 33.3 2
5.7 1.59 4.1 1450 0.15 0.55 43 45 2
6.8 1.89 3.7 0.16 42 2.5
125-100-200 200-150-400

200-150-250
200-150-315
3 6)
(6

7.5 2.08 34.5 2.13 33 2

3
300

300
12.5 3.47 32 2900 2.37 3 46 48 2
15 4.17 30 2.45 50 2.5
IH50-32-160
3.75 1.04 8.6 0.3 29 2
6.3 1.74 8 1450 0.34 0.55 40 48 2
125-100-400 150-125-400
200

200
125-100-315

2.5
125-100-250

0.36 43
100-80-160 150-125-315

7.5 2.08 7.5

100-80-125 150-125-250
=2 7)

6.8 1.89 28.5 1.76 30 2

ns (4
3

11.3 3.14 26.4 2900 1.85 3 44 48 2

13.6 3.78 24.8 1.91 48 2.5
IH50-32-160A
3.4 0.94 7.1 0.25 25.9 2
5.7 1.58 6.6 1450 0.28 0.55 37.1 48 2
125-100-250
125-100-315
80 100

80 100
125-100-200
100-65-200

6.8 1.89 6.2 0.28 41 2.5

100-65-250
100-65-315
3)
(3

7.5 2.08 51.8 3.78 28 2

12.5 3.47 50 2900 4.36 5.5 39 58 2

Q(m \h)
15 4.17 48 4.56 43 2.5

3
IH50-32-200
40 50 60

40 50 60
3.75 1.04 12.9 0.57 23 2
6.3 1.75 12.5 1450 0.65 1.1 33 58 2
100-65-250
100-65-315

100-80-125
100-80-160
100-65-200
80-65-125

2.5
80-65-160

7.5 2.08 12 0.68 36

80-50-250
80-50-315

80-50-200
3)

6.8 1.89 42.7 3.16 25 2

2
s=

11.3 3.14 41 2900 3.24 4 38 58 2

13.6 3.78 39.5 3.57 41 2.5

IH50-32-200A
30

30
3.4 0.94 10.6 0.49 20 2
5.7 1.58 10.3 1450 0.52 0.75 31 58 2
80-50-250
65-50-125
80-50-315
65-50-160

6.8 1.89 9.9 0.54 34 2.5

80-65-160
80-50-200

80-65-125
65-40-200
65-40-250
65-40-315
20

7.5 2.08 82 7.28 23 2

12.5 3.47 80 2900 8.25 11 33 92 2
15 4.17 78.5 8.79 36.5 2.5
IH50-32-250
3.75 1.04 20.5 1.23 17 2
7
18

6.3 1.75 20 1450 1.27 2.2 27 92 2

65-40-250
50-32-125

7.5 2.08 19.6 1.29 31 2.5

65-40-200

65-40-160

65-50-125
50-32-100
65-40-315
10

7 1.94 71.9 6.84 20 2

50-32-250

50-32-200

11.7 3.25 70 2900 6.97 11 32 92 2

14 3.89 68.8 7.71 34 2.5
8

IH50-32-250A
3.51 0.98 18 1.12 15.4 2
2
13

5.9 1.64 17.5 1450 1.25 1.5 25 92 2

7.02 1.95 17.2 1.18 27.9 2.5

50-32-250

50-32-200

50-32-125
50-32-160
5

6.6 1.83 63.6 5.71 20 2

IH50-32-250B 11 3.06 62 2900 6.19 7.5 30 92 2
)

60.9 6.64 33 2.5

93 (187

13.2 3.67
4

15 4.17 21.3 1.85 47 2

25 6.94 20 2900 2.2 3 62 46 2
3

30 8.33 18.6 2.41 63 2.5

3)
=2

IH65-50-125
3
(33

ns )
(47
=2
(ns

0.25 44 2
2)

2.08 5.4
47 )

7.5
(93
33 )

66
(66

(13

12.5 3.47 5 1450 0.31 0.55 55 46 2

15 4.17 4.5 0.33 56 2.5
2

2
200

100
H(m)

60
50

2
8

3
5

H(m) ª：«¬®( >¯QRT'(>，^°±7²QR(³#1"#´，7´>(eµ。

4 IH SERIES IH SERIES 5
-5-
IH Single Stage Chemical Pump

ＩＨ型性能参数ＩＨｔｙｐｅｐｕｍｐｐｅｒｆｏｒｍａｎｃｅＩＨ型性能参数ＩＨｔｙｐｅｐｕｍｐｐｅｒｆｏｒｍａｎｃｅ

Q Power(kw) Q Power(kw)
Capacity H n η Capacity H n η
Head Speed Eff. Weight (NPSH)r Head Speed Eff. Weight (NPSH)r
pump type pump type
（m）（r/min）（% ） ( Kg ) (m) （m）（r/min）（%） ( Kg ) (m)
（m /h）
3
（L/s） Shaft power Motor power （m /h）
3
（L/s） Shaft power Motor power
13.6 3.78 17.6 1.48 44 2 7 1.94 28.4 2.46 19 2
22.7 6.31 16.5 2900 1.67 2.2 61 46 2 IH65-40-315A 11.7 3.25 28 1450 2.71 4 31 115 2
27.3 7.58 15.4 1.91 59.9 2.5 14 3.89 27.8 2.87 34 2.5
IH65-50-125A
6.8 1.89 4.5 0.20 41 2 13.2 3.67 98 14.69 24 2
11.3 3.14 4.1 1450 0.23 0.55 54 46 2 IH65-40-315B 22 6.11 96.5 2900 15.63 22 37 115 2
13.6 3.78 3.7 0.26 53 2.5 26.4 7.33 95.9 17.67 39 2.5
15 4.17 34.2 3.18 44 2 30 8.33 23.2 3.16 60 2
25 6.94 32 2900 3.82 5.5 57 52 2 50 13.89 20 2900 3.95 5.5 69 51 2
30 8.33 30 4.15 59 2.5 60 16.67 17.6 4.29 67 2.5
IH65-50-160 IH80-65-125
7.5 2.08 8.55 0.45 39 2 15 4.17 5.8 0.44 54 2
12.5 3.47 8 1450 0.53 0.75 51 52 2 25 6.94 5 1450 0.53 0.75 64 51 2
15 4.17 7.5 0.58 52.5 2.5 30 8.33 4.4 0.58 62 2.5
13.6 3.78 28.4 2.56 41 2 27.2 7.56 19.1 2.48 57 2
22.7 6.31 26.5 2900 2.93 4 56 52 2 45.3 12.58 16.5 2900 3.04 4 67 51 2
27.3 7.58 24.8 3.29 56 2.5 54.4 15.11 14.5 3.36 64 2.5
IH65-50-160A IH80-65-125A
6.8 1.89 7.09 0.37 35.5 2 13.6 3.78 4.8 0.35 51 2
11.3 3.14 6.6 1450 0.41 0.55 49.6 52 2 22.6 6.28 4.1 1450 0.41 0.55 62 51 2
13.6 3.78 6.2 0.46 49.9 2.5 27.2 7.56 3.6 0.45 59 2.5
15 4.17 53.2 5.3 41 2 30 8.33 36 5.16 57 2
25 6.94 50 2900 6.55 11 52 62 2 50 13.89 32 2900 6.51 11 67 56 2
30 8.33 47.6 7.27 53.5 2.5 60 16.67 28.4 7.14 65 2.5
IH65-40-200 IH80-65-160
7.5 2.08 13.3 0.78 35 2 15 4.17 9 0.74 50 2
12.5 3.47 12.5 1450 0.93 1.5 46 62 2 25 6.94 8 1450 0.88 1.5 62 56 2
15 4.17 11.9 1.02 47.5 2.5 30 8.33 7.2 0.95 62 2.5
13.6 3.78 43.9 4.28 38 2 27.2 7.56 29.7 4.08 54 2
22.7 6.31 41 2900 5.07 7.5 50 62 2 45.4 12.61 26.4 2900 5.02 7.5 65 56 2
27.3 7.58 39.3 5.73 51 2.5 54.4 15.11 23.4 5.59 62 2.5
IH65-40-200A IH80-65-160A
6.8 1.89 11 0.64 31.8 2 13.6 3.78 7.4 0.58 47.3 2
11.3 3.14 10.3 1450 0.72 1.1 44 62 2 22.7 6.31 6.6 1450 0.68 1.1 60 56 2
13.6 3.78 9.8 0.81 44.8 2.5 27.2 7.56 5.9 0.74 59 2.5
15 4.17 81.2 9.76 34 2 30 8.33 55.2 8.51 53 2
25 6.94 80 2900 11.84 15 46 98 2 50 13.89 50 2900 10.81 15 63 64 2
30 8.33 78.4 12.8 50 2.5 60 16.67 45.2 11.92 62 2.5
IH65-40-250 IH80-50-200
7.5 2.08 20.3 1.48 28 2 15 4.17 13.5 1.25 44 2
12.5 3.47 20 1450 1.75 3 39 98 2 25 6.94 12.5 1450 1.49 2.2 57 64 2
15 4.17 19.6 1.86 43 2.5 30 8.33 11.5 1.62 58 2.5
14 3.89 71 8.73 31 2 27.2 7.56 45.4 6.73 50 2
23.4 6.5 74.8 2900 10.6 15 45 98 2 45.3 12.58 41 2900 8.29 11 61 64 2
28 7.78 68.6 11.13 47 2.5 54.4 15.11 37.2 9.35 59 2.5
IH65-40-250A IH80-50-200A
7 1.94 17.8 1.35 25 2 13.6 3.78 11.1 1 41 2
11.7 3.25 17.5 1450 1.47 2.2 37.9 98 2 22.7 6.31 10.3 1450 1.14 2.2 56.1 64 2
14 3.89 17.2 1.64 40 2.5 27.2 7.56 9.5 1.28 55 2.5
13.2 3.67 62.8 7.29 31 2 30 8.33 84 16 43 2
IH65-40-250B 22 6.11 61.8 2900 8.42 11 44 98 2 50 13.89 80 2900 20.57 30 53 102 2
26.4 7.33 53 8.45 45 2.5 60 16.67 75 22.71 54 2.5
IH80-50-250
15 4.17 126.8 18.51 28 2 15 4.17 21 2.15 40 2
25 6.94 125 2900 21.8 30 39 115 2 25 6.94 20 1450 2.72 5.5 50 102 2
30 8.33 124 23.85 42.5 2.5 30 8.33 18.8 3.01 51 2.5
IH65-40-315
7.5 2.08 32.4 3.03 22 2 27.2 7.56 69 12.18 42 2
12.5 3.47 32 1450 3.3 5.5 33 115 2 45.3 12.58 65.7 2900 15.61 22 52 102 2
15 4.17 31.7 3.5 37 2.5 54.4 15.11 61.6 17.57 52 2.5
IH80-50-250A
14 3.89 111.2 16.97 25 2 13.6 3.78 17.3 1.6 40 2
IH65-40-315A 23.4 6.5 109.5 2900 18.36 30 38 115 2 22.7 6.31 16.4 1450 2.07 3 49 102 2
28 7.78 108.8 20.75 40 2.5 27.2 7.56 15.4 2.28 50 2.5

ª ：«¬®( > ¯ Q R T ' ( > ， ^ ° ± 7 ² Q R ( ³ # 1 " # ´ ， 7 ´ > ( e µ 。 ª：«¬®( >¯QRT'(>，^°±7²QR(³#1"#´，7´>(eµ。

Note: The spindle powers listed above is as the powers calculated with water as its medium, motors of various powers can be used according to gravity and viscidity Note: The spindle powers listed above is as the powers calculated with water as its medium, motors of various powers can be used according to gravity and viscidity
of users' various media transferred. of users' various media transferred.

6 IH SERIES IH SERIES -7-

7
IH Single Stage Chemical Pump

ＩＨ型性能参数ＩＨｔｙｐｅｐｕｍｐｐｅｒｆｏｒｍａｎｃｅＩＨ型性能参数ＩＨｔｙｐｅｐｕｍｐｐｅｒｆｏｒｍａｎｃｅ

ª ：«¬®( > ¯ Q R T ' ( > ， ^ ° ± 7 ² Q R ( ³ # 1 " # ´ ， 7 ´ > ( e µ 。 ª：«¬®( >¯QRT'(>，^°±7²QR(³#1"#´，7´>(eµ。

6 IH SERIES IH SERIES -7-

7
IH Single Stage Chemical Pump

ＩＨ型性能参数ＩＨｔｙｐｅｐｕｍｐｐｅｒｆｏｒｍａｎｃｅＩＨ型性能参数ＩＨｔｙｐｅｐｕｍｐｐｅｒｆｏｒｍａｎｃｅ

Q Power(kw) Q Power( KW )
Capacity H n η Capacity H n η
Head Speed Eff. Weight (NPSH)r Head Speed Eff. Weight (NPSH)r
pump type pump type
（m）（r/min）（% ） ( Kg ) (m) （m）（r/min）（%） ( Kg ) (m)
（m /h）
3
（L/s） Shaft power Motor power （m /h）
3
（L/s） Shaft power Motor power
30 8.33 128 27.54 38 2 28 7.79 19.2 3.12 47 2.5
50 13.89 125 2900 34.1 45 50 110 2 IH100-65-250A 45.5 12.64 17.4 1450 3.53 5.5 61 114 2.5
60 16.67 123 37.94 53 2.5 56 15.56 16.2 4.06 60.9 3
IH80-50-315
15 4.17 32.5 3.59 37 2 52.7 14.64 67.9 18.29 53.3 3
25 6.94 32 1450 4.54 7.5 48 110 2 IH100-65-250B 87.8 24.39 61.7 2900 23.1 30 64 114 3.6
30 8.33 31.5 4.94 52 2.5 105.4 29.28 57 26.03 62.9 4.5

27.2 7.56 105 21 37 2 60 16.67 132 44.96 48 2.8

45.3 12.58 102.6 2900 26.4 37 48 110 2 100 27.78 125 2900 54.94 75 62 165 3.2
54.4 15.11 101 29.94 50 2.5 120 33.33 119 60.8 64 4.2
IH80-50-315A IH100-65-315
13.6 3.78 26.3 2.71 36 2 30 8.33 33.5 6.22 44 2
22.7 6.31 25.7 1450 3.46 5.5 46 110 2 50 13.89 32 1450 7.52 11 58 165 2
27.2 7.56 25.2 3.74 50 2.5 60 16.67 30.5 8.31 60 2.5

60 16.67 23.7 5.96 65 3 56.1 15.58 115.5 39.2 45 2.8

100 27.78 20 2900 7.47 11 73 56 4.2 93.5 25.97 109 2900 45.53 75 61 165 3.2
120 33.33 16.3 7.72 69 4.8 112.2 31.17 104 52.13 61 4.2
IH100-80-125 IH100-65-315A
30 8.33 5.7 0.8 58 3 28 7.789 29.3 5.46 41 2
50 13.89 5 1450 0.99 1.5 69 56 3.4 46.5 12.92 28 1450 6.33 11 56 165 2
60 16.67 4.1 0.99 68 3.7 56 15.56 26.7 7.15 57 2.5

55 15.28 19.4 4.68 62 3 52.7 14.64 102 33.29 44 2.8

91.8 25.5 16.8 2900 5.92 7.5 71 56 4.2 IH100-65-315B 88 24.44 97 2900 38.77 55 60 165 3.2
109 30.28 13.7 6.07 67 4.8 105.4 29.28 92 44.04 60 4.2
IH100-80-125A
27.5 7.64 5 0.67 56 3 120 33.33 61 29.33 68 4.5
45.9 12.75 4.2 1450 0.78 1.1 67 56 3.4 200 55.56 50 2900 35.39 45 77 98 5
54.5 15.13 3.4 0.78 65 3.7 240 66.67 41 38.3 70 5.8
IH125-100-200
60 16.67 37 10.1 60 3.8 60 16.67 15.25 3.89 64 2.5
100 27.78 32 2900 11.9 15 73 86 4.3 100 27.78 12.5 1450 4.66 7.5 73 98 2.9
120 33.33 28 12.54 73 5 120 33.33 10.25 5.08 66 3.6
IH100-80-160
30 8.33 9.25 1.3 58 3 109.1 30.31 50.5 23.13 64.9 4.5
50 13.89 8 1450 1.58 2.2 69 86 3.4 182 50.56 41.4 2900 27.38 37 75 98 5
60 16.67 7 1.68 68 3.7 218.2 60.61 34 30.13 67.1 5.8
IH125-100-200A
54.6 15.17 30.6 7.98 57 3.8 54.7 15.19 12.6 3.08 61 2.5
91 25.28 26.5 2900 9.25 15 71 86 4.3 91 25.28 10.3 1450 3.6 5.5 71 98 2.9
109.2 30.33 23.2 9.85 70.4 5 109.4 30.39 8.5 4.02 63 3.6
IH100-80-160A
27.3 7.58 7.66 1.03 55.3 3 120 33.33 90 47.48 62 3.7
45.5 12.64 6.6 1450 1.22 1.5 67 86 3.4 200 55.56 80 2900 58.13 75 75 150 4.5
54.6 15.17 5.8 1.32 65.3 3.7 240 66.67 73 64.52 74 5.5
IH125-100-250
60 16.67 56 14.53 63 3.4 60 16.67 22.5 6.23 59 2
100 27.78 50 2900 18.92 22 72 95 3.9 100 27.78 20 1450 7.56 11 72 150 2.3
120 33.33 44 20.26 71 5.2 120 33.33 18.25 8.4 71 3
IH100-65-200
30 8.33 14 1.91 60 2.5 112 31.11 78 40.35 59 3.7
50 13.89 12.5 1450 2.5 3 68 95 2.5 186.5 51.81 69.5 2900 48.35 75 73 150 4.5
60 16.67 11 2.85 63 3 224 62.22 63.5 54.59 71 5.5
IH125-100-250A
54.6 15.17 46.5 11.51 60.1 3.4 56 15.56 19.5 5.31 56 2
91 25.28 41.5 2900 14.7 18.5 70 95 3.9 93 25.83 17.4 1450 6.29 11 70 150 2.3
109.2 30.33 36.6 16 68 5.2 112 31.11 15.9 7.13 68 3
IH100-65-200A
27.3 7.58 11.6 1.51 57 2.5 105.5 29.31 69 34.2 58 3.7
45.5 12.64 10.3 1450 1.93 3 66 95 2.5 IH125-100-250B 175.5 48.75 61.5 2900 41.42 55 71 150 4.5
54.6 15.17 9.1 2.25 60.1 3 211 58.61 56 46.06 69.9 5.5

60 16.67 88 25.24 57 3 120 33.3 132.5 82.37 52.6 4

100 27.78 80 2900 32.06 37 68 114 3.6 200 55.6 125 2900 94.62 110 72 165 4.5
120 33.33 74 36.12 67 4.5 240 66.7 120 104.64 75 5
IH100-65-250 IH125-100-315
30 8.33 22 3.63 50 2.5 60 16.7 33.5 10.33 53 2.5
50 13.89 20 1450 4.33 5.5 63 114 2.5 100 27.8 32 1450 13.42 22 65 165 2.5
60 16.67 18.5 4.73 64 3 120 33.3 30.5 15.11 66 3

56.1 15.58 77 21.8 54 3 112 31.1 115.2 67.63 52 4

IH100-65-250A 93.5 25.97 70 2900 27.44 37 65 114 3.6 IH125-100-315A 186.5 51.81 108.7 2900 77.81 90 71 165 4.5
112.2 31.17 64.7 30.91 64 4.5 224 62.22 104.3 88.42 72 5

ª ：«¬®( > ¯ Q R T ' ( > ， ^ ° ± 7 ² Q R ( ³ # 1 " # ´ ， 7 ´ > ( e µ 。 ª：«¬®( >¯QRT'(>，^°±7²QR(³#1"#´，7´>(eµ。

8 IH SERIES IH SERIES -9-

9
IH Single Stage Chemical Pump

ＩＨ型性能参数ＩＨｔｙｐｅｐｕｍｐｐｅｒｆｏｒｍａｎｃｅＩＨ型性能参数ＩＨｔｙｐｅｐｕｍｐｐｅｒｆｏｒｍａｎｃｅ

27.2 7.56 105 21 37 2 60 16.67 132 44.96 48 2.8

60 16.67 23.7 5.96 65 3 56.1 15.58 115.5 39.2 45 2.8

55 15.28 19.4 4.68 62 3 52.7 14.64 102 33.29 44 2.8

60 16.67 88 25.24 57 3 120 33.3 132.5 82.37 52.6 4

56.1 15.58 77 21.8 54 3 112 31.1 115.2 67.63 52 4

IH100-65-250A 93.5 25.97 70 2900 27.44 37 65 114 3.6 IH125-100-315A 186.5 51.81 108.7 2900 77.81 90 71 165 4.5
112.2 31.17 64.7 30.91 64 4.5 224 62.22 104.3 88.42 72 5

ª ：«¬®( > ¯ Q R T ' ( > ， ^ ° ± 7 ² Q R ( ³ # 1 " # ´ ， 7 ´ > ( e µ 。 ª：«¬®( >¯QRT'(>，^°±7²QR(³#1"#´，7´>(eµ。

8 IH SERIES IH SERIES -9-

9
IH Single Stage Chemical Pump

ＩＨ型性能参数ＩＨｔｙｐｅｐｕｍｐｐｅｒｆｏｒｍａｎｃｅ外形尺寸图Ｄｉｍｅｎｓｉｏｎｄｉａｇｒａｍ

Q Power(kw)
Capacity H n η
Head Speed Eff. Weight (NPSH)r a x
pump type f
（m）（r/min）（% ） ( Kg ) (m)
（m /h）
3
（L/s） Shaft power Motor power
56 15.56 28.8 8.45 52 2.5
IH125-100-315A 93 25.83 27.2 1450 10.77 15 64 165 2.5
112 31.11 26.1 12.25 65 3

h2
60 16.67 52 17.71 48 2.5 L
IH125-100-400 100 27.78 50 1450 24.77 30 55 210 2.5
120 33.33 48.5 25.58 62 3

d
56 15.56 45 15.97 43 2.5
IH125-100-400A 93 25.83 43.2 1450 20.27 30 54 210 2.5
112 31.11 41.9 21.31 60 3

h1
120 33.33 24.8 12.29 66 2.5 s2

k2
k1
IH150-125-250 200 55.56 20 1450 14.16 18.5 77 164 2.8
240 66.67 15 14.43 68 3.5
m2 m3 s1 n4 b
109.1 30.28 20.5 9.75 62.5 2.5 m1 m4 n3
IH150-125-250A 182 50.56 16.5 1450 10.91 15 75 164 2.8 w n2
218.2 60.61 12.4 11.31 65.2 3.5 n1

120 33.33 36.3 18.84 63 2.5

IH150-125-315 200 55.56 32 1450 23.25 30 75 195 2.8
240 66.67 28.5 25.89 72 3.8

IH150-125-315A
109.1
182
30.28
50.56
30
25.5 1450
14.85
17.32 22
60
73 195
2.5
2.8 外形尺寸表Ｄｉｍｅｎｓｉｏｎｔａｂｌｅ
218.2 60.61 23.5 20.23 69 3.8

99 27.5 24.7 11.29 59 2.5

IH150-125-315B 165 45.83 22 1450 13.74 18.5 72 195 2.8 Pump Pump seat Bolt hole Shaft end Inte-
198 55 19.4 15.17 69 3.8 W rval
Type
a f h1 h2 b m1 m2 m3 m4 n1 n2 n3 n4 k1 k2 s1 s2 d L x
120 33.33 57.5 30.82 61 2
IH150-125-400 200 55.56 50 1450 38.93 55 70 237 2.5 IH50-32-125 80 385 112 140 50 100 70 19 60 190 140 145 110 12 10 285 φ14 φ14 24 50 100
240 66.67 44 45.68 63 3
IH50-32-160 80 385 132 160 50 100 70 19 60 240 190 145 110 12 10 285 φ14 φ14 24 50 100
109.1 30.28 47.5 24.35 58 2 IH50-32-200 80 385 160 180 50 100 70 19 60 240 190 145 110 12 10 285 φ14 φ14 24 50 100
IH150-125-400A 182 50.56 41 1450 29.94 37 68 237 2.5
218.2 60.61 36.5 36.17 60 3 IH50-32-250 100 500 180 225 65 125 95 25 65 320 250 145 110 16 14 370 φ14 φ14 32 80 100
IH65-32-125 80 385 112 140 50 100 70 19 60 210 160 145 110 12 10 285 φ14 φ14 24 50 100
99 27.5 39.1 18.51 57 2
IH150-125-400B 165 45.83 34 1450 22.82 30 67 237 2.5 IH65-50-160 80 385 132 160 50 100 70 19 60 240 190 145 110 12 10 285 φ14 φ14 24 50 100
198 55 29.9 27.81 58 3
IH65-40-200 100 385 160 180 50 100 70 19 60 265 212 145 110 12 10 285 φ14 φ14 24 50 100
240 66.67 23 21.49 70 2.5 IH65-40-250 100 500 180 225 65 125 95 25 65 320 250 145 110 16 14 370 φ14 φ14 32 80 100
IH200-150-250 400 111.11 20 1450 27.59 37 79 194 2.8
460 127.78 18 28.2 80 3 IH65-40-315 125 500 200 250 65 125 95 25 65 345 280 145 110 16 14 370 φ14 φ14 32 80 100
IH80-65-125 100 385 132 160 50 100 70 19 60 240 190 145 110 12 10 285 φ14 φ14 24 50 100
218.2 60.61 18.9 16.77 67 2.5
IH200-150-250A 363 100.83 16.5 1450 20.66 30 79 194 2.8 IH80-65-160 100 385 160 180 50 100 70 19 60 265 212 145 110 12 10 285 φ14 φ14 24 50 100
418 116.1 14.8 21.61 78 3
IH80-50-200 100 385 160 200 50 100 70 19 60 265 212 145 110 12 10 285 φ14 φ14 24 50 100
240 66.67 35.6 34.75 67 3 IH80-50-250 125 500 180 225 65 125 95 25 65 320 250 145 110 16 14 370 φ14 φ14 32 80 100
IH200-150-315 400 111.11 32 1450 44.15 55 79 268 3.5
460 127.78 29.4 47.86 77 4 IH80-50-315 125 500 225 280 65 125 95 25 65 345 280 145 110 16 14 370 φ14 φ14 32 80 100
IH100-80-125 100 385 160 180 65 125 95 19 60 280 212 145 110 12 10 285 φ14 φ14 24 50 100
218.2 60.61 29.4 27.31 64 3
IH200-150-315A 363 100.84 25.5 1450 32.76 45 77 268 3.5 IH100-80-160 100 500 160 200 65 125 95 24 60 280 212 145 110 16 10 370 φ14 φ14 32 80 100
418 116.11 24.3 37.4 74 4
IH100-65-200 100 500 180 225 65 125 95 25 65 320 250 145 110 16 14 370 φ18 φ14 32 80 140
197.7 54.92 24.1 20.61 63 3 IH100-65-250 125 500 200 250 80 160 120 25 65 360 280 145 110 16 14 370 φ18 φ14 32 80 140
IH200-150-315B 329 91.39 21.6 1450 25.48 37 76 268 3.5
378.8 105.22 19.7 27.86 73 4 IH100-65-315 125 530 225 280 80 160 120 28 65 400 315 145 110 16 14 370 φ18 φ14 32 80 140

67 3 IH125-100-200 125 500 200 280 80 160 120 25 65 360 280 145 110 16 14 370 φ18 φ14 42 80 140
240 66.67 55.8 54.47
IH200-150-400 400 111.11 50 1450 69.87 90 78 289 3.5 IH125-100-250 140 530 225 280 80 160 120 28 65 400 315 145 110 20 14 370 φ18 φ14 42 110 140
460 127.78 47 78.55 75 4
IH125-100-315 140 530 250 315 80 160 120 28 65 400 315 145 110 20 14 370 φ18 φ14 42 110 140
218.2 60.61 46 42.74 64 3 200 150 28 65 500 400 145 110 20 14 370 φ22 φ14 42 110 140
IH125-100-400 140 530 280 355 100
IH200-150-400A 363 100.83 41 1450 53.36 75 76 289 3.5
418 116.11 38.8 61.38 72 4 IH150-125-250 140 530 250 355 80 160 120 28 65 400 315 145 110 20 14 370 φ18 φ14 42 110 140

197.7 54.92 37.7 32.24 63 3 IH150-125-315 140 530 280 355 100 200 150 28 65 500 400 145 110 20 14 370 φ22 φ14 42 110 140
IH200-150-400B 329 91.39 33.8 1450 40.4 55 75 289 3.5 IH150-125-400 140 530 315 400 100 200 150 28 65 500 400 145 110 20 14 370 φ22 φ14 42 110 140
378.8 105.22 31.8 46.23 71 4
IH200-150-250 160 530 280 275 100 200 150 28 65 500 400 145 110 20 14 370 φ22 φ14 42 110 180
ª ：«¬®( > ¯ Q R T ' ( > ， ^ ° ± 7 ² Q R ( ³ # 1 " # ´ ， 7 ´ > ( e µ 。 IH200-150-315 160 650 315 400 100 200 150 38 80 550 450 200 110 20 30 500 φ22 φ18 48 110 180
Note: The spindle powers listed above is as the powers calculated with water as its medium, motors of various powers can be used according to gravity and viscidity
IH200-150-400 160 650 315 450 100 200 150 38 80 550 450 200 110 20 30 500 φ22 φ18 48 110 180
of users' various media transferred.

-10-
10 IH SERIES IH SERIES -11-
11
IH Single Stage Chemical Pump

ＩＨ型性能参数ＩＨｔｙｐｅｐｕｍｐｐｅｒｆｏｒｍａｎｃｅ外形尺寸图Ｄｉｍｅｎｓｉｏｎｄｉａｇｒａｍ

h2
60 16.67 52 17.71 48 2.5 L
IH125-100-400 100 27.78 50 1450 24.77 30 55 210 2.5
120 33.33 48.5 25.58 62 3

d
56 15.56 45 15.97 43 2.5
IH125-100-400A 93 25.83 43.2 1450 20.27 30 54 210 2.5
112 31.11 41.9 21.31 60 3

h1
120 33.33 24.8 12.29 66 2.5 s2

120 33.33 36.3 18.84 63 2.5

IH150-125-315 200 55.56 32 1450 23.25 30 75 195 2.8
240 66.67 28.5 25.89 72 3.8

IH150-125-315A
109.1
182
30.28
50.56
30
25.5 1450
14.85
17.32 22
60
73 195
2.5
2.8 外形尺寸表Ｄｉｍｅｎｓｉｏｎｔａｂｌｅ
218.2 60.61 23.5 20.23 69 3.8

99 27.5 24.7 11.29 59 2.5

-10-
10 IH SERIES IH SERIES -11-
11
IH Single Stage Chemical Pump

进出口法兰示意图Ｉｎｐｕｔ＆ｏｕｔｐｕｔｆｌａｎｇｅｄｉａｇｒａｍ安装外形图Ｉｎｓｔａｌｌａｔｉｏｎａｎｄｏｕｔｌｉｎｅｆｉｇｕｒｅｓ

L6 YB L7 Y
D1 D2 YB
a f x L4 B5

L5 Y B4
D 11 D 12

d1 d2

f2
f1

b2
b1

h3
DN 2

h2
DN 1
n 2-d 02
n1- d01

H1
h1

H
A n-d

h4
H2
¼½ ¾¼½
Input flange Output flange L2 L3 B3
L1 B2

进出口法兰尺寸表Ｉｎｐｕｔ＆ｏｕｔｐｕｔｆｌａｎｇｅｓｉｚｅｔａｂｌｅ安装尺寸表Ｉｎｓｔａｌｌａｔｉｏｎｄｉｍｅｎｓｉｏｎ

!"#$%&' ()#$%&' * + , - . & '
/
Input flange size Output flange size Outline and installation dimension
Motor type/power
Type Type
(kW)
DN 1 D1 D 11 d1 b1 f1 n 1 -d 01 DN 2 D2 D 12 d2 b2 f2 n 2 -d 02 A L1 L2 L3 L4 L5 a f x L6 L7 B2 B3 B4 B5 h1 h2 h3 h4 H H1 H2 n-d
IH50-32-125 50 165 125 99 20 3 4-17.5 32 140 100 76 18 2 4-17.5 YB801-4/0.55 80 820 150 540 330 290 80 385 100 895 855 360 320 150 225 112 175 340 25 197 337 117 4-φ19
IH50-32-160 50 165 125 99 20 3 4-17.5 32 140 100 76 18 2 4-17.5 YB802-2/1.1 80 820 150 540 330 290 80 385 100 895 855 360 320 150 225 112 175 340 25 197 337 117 4-φ19
IH50-32-125 YB90S-2/1.5 80 820 150 540 360 315 80 385 100 925 880 360 320 160 225 112 195 355 25 197 337 107 4-φ19
IH50-32-200 50 165 125 99 20 3 4-17.5 32 140 100 76 18 2 4-17.5
YB90L-2/2.2 80 920 170 600 385 340 80 385 100 950 925 390 350 155 225 112 195 355 30 197 337 107 4-φ19
IH50-32-250 50 165 125 99 20 3 4-17.5 32 140 100 76 18 2 4-17.5
YB100L-2/3.0 80 920 170 600 430 380 80 385 100 995 945 390 350 180 225 112 245 380 30 197 337 97 4-φ19
IH65-50-125 65 185 145 118 20 3 4-17.5 50 165 125 99 20 3 4-17.5
YB801-4/0.55 80 820 150 540 330 290 80 385 100 895 855 360 320 150 225 132 175 340 25 217 377 137 4-φ19
IH65-50-160 65 185 145 118 20 3 4-17.5 50 165 125 99 20 3 4-17.5
YB802-4/0.75 80 820 150 540 330 290 80 385 100 895 855 360 320 150 225 132 175 340 25 217 377 137 4-φ19
IH65-40-200 65 185 145 118 20 3 4-17.5 40 150 110 84 18 3 4-17.5 925 880 360 320 160 225 132 195 355 25 217 377 127 4-φ19
YB90S-4/1.1 80 820 150 540 360 315 80 385 100
IH65-40-250 65 185 145 118 20 3 4-17.5 40 150 110 84 18 3 4-17.5 IH50-32-160 YB90L-2/2.2 80 920 170 600 385 340 80 385 100 950 925 390 350 155 225 132 195 355 30 217 377 127 4-φ19
IH65-40-315 65 185 145 118 20 3 4-17.5 40 150 110 84 18 3 4-17.5 YB100L-2/3 80 920 170 600 430 380 80 385 100 995 945 390 350 180 225 132 245 380 30 217 377 117 4-φ19
IH80-65-125 80 200 160 132 20 3 8-17.5 65 185 145 118 20 3 4-17.5 YB112M-2/4 80 920 170 600 460 400 80 385 100 1025 965 390 350 190 225 132 245 380 30 217 377 105 4-φ19
IH80-65-160 80 200 160 132 20 3 8-17.5 65 185 145 118 20 3 4-17.5 YB132S 1 -2/5.5 80 1020 190 660 510 475 80 385 100 1075 1040 450 400 210 240 132 315 470 30 217 377 85 4-φ24
IH80-50-200 80 200 160 132 20 3 8-17.5 50 165 125 99 20 3 4-17.5 YB801-4/0.55 80 820 150 540 330 290 80 385 100 895 855 360 320 150 225 160 175 340 25 245 425 165 4-φ19
YB802-4/0.75 80 820 150 540 330 290 80 385 100 895 855 360 320 150 225 160 175 340 25 245 425 165 4-φ19
IH80-50-250 80 200 160 132 20 3 8-17.5 50 165 125 99 20 3 4-17.5
YB90S-4/1.1 80 820 150 540 360 315 80 385 100 925 880 360 320 160 225 160 195 355 25 245 425 155 4-φ19
IH80-50-315 80 200 160 132 20 3 8-17.5 50 165 125 99 20 3 4-17.5
YB90L-4/1.5 80 920 170 600 385 340 80 385 100 950 925 390 350 160 225 160 195 355 30 245 425 155 4-φ19
IH100-80-125 100 220 180 156 22 3 8-17.5 80 200 160 132 20 3 8-17.5 IH50-32-200
YB112M-2/4 80 920 170 600 460 400 80 385 100 1025 965 390 350 190 225 160 265 400 30 245 425 133 4-φ19
IH100-80-160 100 220 180 156 22 3 8-17.5 80 200 160 132 20 3 8-17.5 240 160 315 470 30 245 440 113 4-φ24
YB132S 1 -2/5.5 80 1020 190 660 510 475 80 385 100 1075 1040 450 400 210
IH100-65-200 100 220 180 156 22 3 8-17.5 65 185 145 118 20 3 4-17.5 80 1020 190 660 510 475 80 385 100 1075 1040 450 400 210 240 160 315 470 30 245 440 113 4-φ24
YB132S 2 -2/7.5
IH100-65-250 100 220 180 156 22 3 8-17.5 65 185 145 118 20 3 4-17.5 Y B 160M 1 -2/11 80 1140 210 740 655 605 80 385 100 1220 1170 490 440 255 240 160 385 530 30 260 440 80 4-φ24
IH100-65-315 100 220 180 156 22 3 8-17.5 65 185 145 118 20 3 4-17.5 Y B 90S-4/1.1 95 1020 190 660 360 315 100 500 100 1060 1015 450 400 160 225 180 195 355 30 265 490 175 4-φ24
IH125-100-200 125 250 210 184 22 3 8-17.5 100 220 180 156 22 3 8-17.5 YB90L-4/1.5 95 1020 190 660 385 340 100 500 100 1085 1040 450 400 160 225 180 195 355 30 265 490 175 4-φ24
IH125-100-250 125 250 210 184 22 3 8-17.5 100 220 180 156 22 3 8-17.5 YB100L 1 -4/2.2 95 1020 190 660 430 380 100 500 100 1130 1080 450 400 180 225 180 245 380 30 265 490 165 4-φ24
YB100L 2 -4/3 95 1020 190 660 430 380 100 500 100 1130 1080 450 400 180 225 180 245 380 30 265 490 165 4-φ24
IH125-100-315 125 250 210 184 22 3 8-17.5 100 220 180 156 22 3 8-17.5
IH50-32-250 YB132S 2 -2/7.5 95 1140 210 740 510 475 100 500 100 1210 1175 490 440 210 240 180 315 470 30 280 505 148 4-φ24
IH125-100-400 125 250 210 184 22 3 8-17.5 100 220 180 156 22 3 8-17.5
YB160M 1 -2/11 95 1270 225 840 655 605 100 500 100 1355 1305 540 490 265 240 180 385 530 30 300 525 140 4-φ24
IH150-125-250 150 285 240 211 24 3 8-22 125 250 210 184 22 3 8-17.5
YB160M 2 -2/15 95 1270 225 840 655 605 100 500 100 1355 1305 540 490 265 240 180 385 530 30 300 525 140 4-φ24
IH150-125-315 150 285 240 211 24 3 8-22 125 250 210 184 22 3 8-17.5 300 525 140
YB160L-2/18.5 95 1270 225 840 695 650 100 500 100 1395 1350 540 490 265 240 180 385 530 30 4-φ24
IH150-125-400 150 285 240 211 24 3 8-22 125 250 210 184 22 3 8-17.5 100 500 100 1430 1370 540 490 285 240 180 430 565 30 300 525 120 4-φ24
YB180M-2/22 95 1270 225 840 730 670
IH200-150-250 200 340 295 266 24 3 12-22 150 285 240 211 24 3 8-22 YB801-4/0.55 80 820 150 540 330 290 80 385 100 895 855 360 320 150 225 112 175 340 25 197 337 117 4-φ19
IH200-150-315 200 340 295 266 24 3 12-22 150 285 240 211 24 3 8-22 IH65-50-125 YB802-4/0.75 80 820 150 540 330 290 80 385 100 895 855 360 320 150 225 112 175 340 25 197 337 117 4-φ19
IH200-150-400 200 340 295 266 24 3 12-22 150 285 240 211 24 3 8-22 YB90L-2/2.2 80 920 170 600 385 340 80 385 100 950 925 390 350 160 225 112 195 355 30 197 337 107 4-φ19

12
-12- IH SERIES IH SERIES 13
-13-
IH Single Stage Chemical Pump

L6 YB L7 Y
D1 D2 YB
a f x L4 B5

L5 Y B4
D 11 D 12

d1 d2

f2
f1

b2
b1

h3
DN 2

h2
DN 1
n 2-d 02
n1- d01

H1
h1

H
A n-d

h4
H2
¼½ ¾¼½
Input flange Output flange L2 L3 B3
L1 B2

进出口法兰尺寸表Ｉｎｐｕｔ＆ｏｕｔｐｕｔｆｌａｎｇｅｓｉｚｅｔａｂｌｅ安装尺寸表Ｉｎｓｔａｌｌａｔｉｏｎｄｉｍｅｎｓｉｏｎ

12
-12- IH SERIES IH SERIES 13
-13-
IH Single Stage Chemical Pump

安装尺寸表Ｉｎｓｔａｌｌａｔｉｏｎｄｉｍｅｎｓｉｏｎ安装尺寸表Ｉｎｓｔａｌｌａｔｉｏｎｄｉｍｅｎｓｉｏｎ

/ * + , - . & ' / * + , - . & '

Outline and installation dimension Outline and installation dimension
Motor type/power Motor type/power
pump type pump type
(kw) (kW)
A L1 L2 L3 L4 L5 a f x L6 L7 B2 B3 B4 B5 h1 h2 h3 h4 H H1 H2 n-d A L1 L2 L3 L4 L5 a f x L6 L7 B2 B3 B4 B5 h1 h2 h3 h4 H H1 H2 n-d

YB100 L -2/3 80 920 170 600 430 380 80 385 100 995 945 390 350 180 225 112 245 380 30 197 337 97 4-φ19 YB90 L -4/1.5 80 920 170 600 385 340 100 385 100 970 925 390 350 160 225 160 195 355 30 245 425 155 4-φ19
IH65-50-125 YB112 M -2/4 80 920 170 600 460 400 80 385 100 1025 965 390 350 190 225 112 265 400 30 197 337 85 4-φ19 YB100 L 1 -4/2.2 80 920 170 600 430 380 100 385 100 1015 965 390 350 180 225 160 245 380 30 245 425 145 4-φ19
YB132 S 1 -2/5.5 80 1020 190 660 510 475 80 385 100 1075 1040 450 400 210 240 112 315 470 30 197 337 65 4-φ24 YB132 S 1 -2/5.5 80 1020 190 660 510 475 100 385 100 1095 1060 450 400 210 240 160 315 470 30 245 425 113 4-φ24
IH80-65-160
YB801-4/0.55 80 920 170 600 330 290 80 385 100 895 855 360 320 150 225 132 175 340 25 217 377 137 4-φ19 YB132 S 2 -2/7.5 80 1020 190 660 510 475 100 385 100 1095 1060 450 400 210 240 160 315 470 30 245 425 113 4-φ24
YB802-4/0.75 80 920 170 600 330 290 80 385 100 895 855 360 320 150 225 132 175 340 25 217 377 137 4-φ19 YB160 M 1 -2/11 80 1140 210 740 655 605 100 385 100 1240 1190 490 440 265 240 160 385 530 30 260 440 100 4-φ24
YB90 S -4/1.1 80 920 170 600 360 315 80 385 100 925 880 360 320 160 225 132 195 355 25 217 377 127 4-φ19 YB160 M 2 -2/15 80 1140 210 740 655 605 100 385 100 1240 1190 490 440 265 240 160 385 530 30 260 440 100 4-φ24
YB90 L -4/1.5 80 920 170 600 385 340 80 385 100 950 925 390 350 160 225 132 195 355 25 217 377 127 4-φ19 YB90 S -4/1.1 80 920 170 600 360 315 100 385 100 945 900 390 350 160 225 160 195 355 30 245 445 155 4-φ19
IH65-50-160 YB100 L -2/3 80 920 170 600 430 380 80 385 100 995 945 390 350 180 225 132 245 380 30 217 377 117 4-φ19 YB90 L -4/1.5 80 920 170 600 385 340 100 385 100 970 925 390 350 160 225 160 195 355 30 245 445 155 4-φ19
YB112 M -2/4 80 920 170 600 460 400 80 385 100 1025 965 390 350 190 225 132 265 400 30 217 377 105 4-φ19 YB100 L 1 -4/2.2 80 920 170 600 430 380 100 385 100 1015 965 390 350 180 225 160 245 380 30 245 445 145 4-φ19
YB132 S 1 -2/5.5 80 920 170 600 510 475 80 385 100 1075 1040 450 400 210 240 132 315 470 30 217 377 85 4-φ24 YB100 L 2 -4/3 80 920 170 600 430 380 100 385 100 1015 965 390 350 180 225 160 245 380 30 245 445 145 4-φ19
YB132 S 2 -2/7.5 80 920 170 600 510 475 80 385 100 1075 1040 450 400 210 240 132 315 470 30 217 377 85 4-φ24 YB112 M -4/4 80 920 170 600 460 400 100 385 100 1045 985 390 350 190 225 160 265 400 30 245 445 133 4-φ19
IH80-50-200
YB160 M 1 -2/11 80 920 170 600 655 605 80 385 100 1220 1170 490 440 265 240 132 385 530 30 232 392 57 4-φ24 YB132 S 2 -2/7.5 80 1020 190 660 510 475 100 385 100 1095 1060 450 400 210 225 160 315 470 30 245 445 113 4-φ24
YB802-4/0.75 80 920 170 600 330 290 100 385 100 915 875 390 350 150 225 160 175 340 30 245 425 165 4-φ19 YB160 M 1 -2/11 80 1140 210 740 655 605 100 385 100 1240 1190 490 440 210 240 160 385 530 30 260 460 100 4-φ24
YB90 S -4/1.1 80 920 170 600 360 315 100 385 100 945 900 390 350 160 225 160 195 355 30 245 425 155 4-φ19 YB160 M 2 -2/15 80 1140 210 740 655 605 100 385 100 1240 1190 490 440 210 240 160 385 530 30 260 460 100 4-φ24
YB90 L -4/1.5 80 920 170 600 385 340 100 385 100 970 945 390 350 160 225 160 195 355 30 245 425 155 4-φ19 YB160 L -2/18.5 80 1140 210 740 695 650 100 385 100 1280 1235 490 440 265 240 160 385 530 30 260 460 100 4-φ24
YB100 L 1 -4/2.2 80 920 170 600 430 380 100 385 100 1015 965 390 350 180 225 160 245 380 30 245 425 145 4-φ19 YB180 M -2/22 80 1140 210 740 730 670 100 385 100 1315 1315 490 440 285 240 160 430 565 30 260 460 80 4-φ24
IH65-40-200
YB132S 1 -2/5.5 80 1020 190 660 510 475 100 385 100 1095 1060 450 400 210 240 160 315 470 30 245 425 113 4-φ24 YB100 L 1 -4/2.2 95 1020 190 660 430 380 125 500 100 1155 1105 450 400 180 225 180 245 380 30 265 490 165 4-φ24
YB132S 2 -2/7.5 80 1020 190 660 510 475 100 385 100 1095 1060 450 400 210 240 160 315 470 30 245 425 113 4-φ24 YB100 L 2 -4/3 95 1020 190 660 430 380 125 500 100 1155 1105 450 400 180 225 180 245 380 30 265 490 165 4-φ24
YB160M 1 -2/11 80 1140 210 740 655 605 100 385 100 1240 1190 490 440 265 240 160 385 530 30 260 440 100 4-φ24 YB112 M -4/4 95 1020 190 660 460 400 125 500 100 1185 1125 450 400 190 225 180 265 400 30 265 490 153 4-φ24
YB160M 2 -2/15 80 1140 210 740 655 605 100 385 100 1240 1190 490 440 265 240 160 385 530 30 260 440 100 4-φ24 YB132 S -4/5.5 95 1140 210 740 510 475 125 500 100 1235 1200 490 440 210 240 180 315 470 30 280 505 148 4-φ24
YB90S-4/1.1 95 1020 190 660 360 315 100 500 100 1060 1015 450 400 160 225 180 195 355 30 260 490 175 4-φ24 YB132 M -4/7.5 95 1140 210 740 550 515 125 500 100 1275 1240 490 440 210 240 180 315 470 30 280 505 148 4-φ24
YB90L-4/1.5 95 1020 190 660 385 340 100 500 100 1080 1040 450 400 160 225 180 195 355 30 260 490 175 4-φ24 IH80-50-250 YB160 M 2 -2/15 95 1270 225 840 655 605 125 500 100 1380 1330 540 490 260 240 180 385 530 30 300 525 140 4-φ24
YB100L 1 -4/2.2 95 1020 190 660 430 380 100 500 100 1130 1080 450 400 180 225 180 245 380 30 260 490 165 4-φ24 YB160 L - 2 /18.5 95 1270 225 840 695 650 125 500 100 1420 1375 540 490 260 240 180 385 530 30 300 525 140 4-φ24
YB100L 2 -4/3 95 1020 190 660 430 380 100 500 100 1130 1080 450 400 180 225 180 245 380 30 260 490 165 4-φ24 YB180 M -2/22 95 1270 225 840 730 670 125 500 100 1455 1395 540 490 285 240 180 430 565 30 300 525 120 4-φ24
YB112M-4/4 95 1020 190 660 460 400 100 500 100 1160 1100 450 400 190 240 180 265 400 30 260 490 153 4-φ24 YB200 L 1 - 2/30 95 1420 250 940 803 775 125 500 100 1528 1480 610 550 315 240 180 475 625 40 320 545 120 4-φ28
IH65-40-250
YB160M 1 -2/11 95 1270 225 840 655 605 100 500 100 1355 1305 540 490 265 240 180 385 530 30 300 525 140 4-φ24 YB200 L 2 -2/37 95 1420 250 940 803 775 125 500 100 1528 1480 610 550 315 240 180 475 625 40 320 545 120 4-φ28
YB160M 2 -2/15 95 1270 225 840 655 605 100 500 100 1355 1305 540 490 265 240 180 385 530 30 300 525 140 4-φ24 YB225 M -2/45 95 1420 250 940 840 815 125 500 100 1565 1540 610 550 345 290 180 530 670 40 320 545 95 4-φ28
YB160L-2/18.5 95 1270 225 840 695 650 100 500 100 1395 1350 540 490 265 240 180 385 530 30 300 525 140 4-φ24 YB112 M -4/4 95 1440 210 740 460 400 125 500 100 1185 1125 490 440 190 225 225 265 400 30 325 605 213 4-φ24
YB180M-2/22 95 1270 225 840 730 670 100 500 100 1430 1370 540 490 285 240 180 430 565 30 300 525 120 4-φ24 YB132 S -4/5.5 95 1440 210 740 510 475 125 500 100 1235 1200 490 440 210 240 225 315 470 30 325 605 193 4-φ24
YB200L 1 -2/30 95 1420 250 940 803 775 100 500 100 1530 1475 610 550 315 290 180 475 625 40 320 545 120 4-φ28 YB132 M -4/7.5 95 1440 210 740 550 515 125 500 100 1275 1240 490 440 210 240 225 315 470 30 325 605 193 4-φ24
YB100L 2 -4/3 95 1140 210 740 430 380 125 500 100 1155 1105 490 440 180 255 200 245 380 30 300 550 200 4-φ24 YB160 M -4/11 95 1270 225 840 655 605 125 500 100 1380 1330 540 490 265 240 225 385 530 30 345 625 185 4-φ24
YB112M-4/4 95 1140 210 740 460 400 125 500 100 1185 1125 490 440 190 255 200 265 400 30 300 550 188 4-φ24 YB160 L -4/15 95 1270 225 840 695 650 125 500 100 1420 1375 540 490 265 240 225 385 530 30 345 625 185 4-φ24
IH80-50-315
YB132S-4/5.5 95 1140 210 740 510 475 125 500 100 1235 1200 490 440 210 240 200 315 470 30 300 550 168 4-φ24 YB200 L 1 -2/30 95 1420 250 940 803 775 125 500 100 1528 1500 610 550 315 290 225 475 625 40 365 645 165 4-φ28
YB132M-4/7.5 95 1140 210 740 550 515 125 500 100 1275 1240 490 440 210 240 200 315 470 30 300 550 168 4-φ24 YB200 L 2 -2/37 95 1420 250 940 803 775 125 500 100 1528 1500 610 550 315 290 225 475 625 40 365 645 165 4-φ28
YB160M-4/11 95 1270 225 840 655 605 125 500 100 1380 1330 540 490 265 240 200 385 530 30 320 570 160 4-φ24 YB225 M -2/45 95 1420 250 940 840 815 125 500 100 1565 1540 610 550 245 290 225 530 670 40 365 645 140 4-φ28
IH65-40-315 YB160M 2 -2/15 95 1270 225 840 655 605 125 500 100 1380 1330 540 490 265 240 200 385 530 30 320 570 160 4-φ24 YB250 M -2/55 95 1620 290 1060 935 930 125 500 100 1660 1655 660 600 385 330 225 575 770 40 385 665 135 4-φ28
YB160L-2/18.5 95 1270 225 840 695 650 125 500 100 1420 1375 540 490 265 240 200 430 565 30 320 570 160 4-φ24 YB280 S -2/75 95 1820 320 1200 1010 1000 125 500 100 1735 1725 730 670 410 330 225 640 830 40 385 665 105 4-φ28
YB180M-2/22 95 1270 225 840 730 670 125 500 100 1455 1395 540 490 285 240 200 430 565 30 320 570 140 4-φ24 YB802-4/0.75 95 920 170 600 330 290 100 385 100 915 875 390 350 150 225 160 175 340 30 245 425 165 4-φ19
YB200L 1 -2/30 95 1420 250 940 803 775 125 500 100 1528 1500 610 550 315 290 200 475 625 40 340 590 140 4-φ28 YB90 S -4/1.1 95 920 170 600 360 315 100 385 100 945 900 390 350 160 225 160 195 355 30 245 425 155 4-φ19
YB200L 2 -2/37 95 1420 250 940 803 775 125 500 100 1528 1500 610 550 315 290 200 475 625 40 340 590 140 4-φ28 YB90 L -4/1.5 95 920 170 600 385 340 100 385 100 970 925 390 350 160 225 160 195 355 30 245 425 155 4-φ19
YB225M-2/45 95 1420 250 940 840 815 125 500 100 1565 1540 610 550 345 290 200 530 670 40 340 590 115 4-φ28 YB100 L 1 -4/2.2 95 920 170 600 430 380 100 385 100 1015 965 390 350 180 225 160 245 380 30 245 425 145 4-φ19
YB801-4/0.55 80 820 150 540 330 290 100 385 100 915 875 360 320 150 225 132 175 340 25 217 377 137 4-φ19 YB100 L 2 -4/3 95 920 170 600 430 380 100 385 100 1015 965 390 350 180 225 160 245 380 30 245 425 145 4-φ19
IH100-80-125
YB802-4/0.75 80 820 150 540 330 290 100 385 100 915 875 360 320 150 225 132 175 340 25 217 377 137 4-φ19 YB112 M -4/4 95 920 170 600 460 400 100 385 100 1045 985 390 350 190 225 160 265 400 30 245 425 133 4-φ19
YB90S-4/1.1 80 820 150 540 360 315 100 385 100 945 900 360 320 160 225 132 195 355 25 217 377 127 4-φ19 YB132 S 1 -2/5.5 95 1020 190 660 510 475 100 385 100 1095 1065 450 400 210 240 160 315 470 30 245 425 113 4-φ24
YB90L-4/1.5 80 920 170 600 385 340 100 385 100 970 925 390 350 160 225 132 195 355 25 217 377 127 4-φ19 YB132 S 2 -2/7.5 95 1020 190 660 510 475 100 385 100 1095 1065 450 400 210 240 160 315 470 30 245 425 113 4-φ24
IH80-65-125 YB100L-2/3 80 920 170 600 430 380 100 385 100 1015 965 390 350 180 225 132 245 380 30 217 377 117 4-φ19 YB160 M 1 -2/11 95 1140 210 740 655 605 100 385 100 1240 1190 490 440 265 240 160 385 530 30 260 440 100 4-φ24
YB112M-2/4 80 920 170 600 460 400 100 385 100 1045 985 390 350 190 225 132 265 400 30 217 377 105 4-φ19 YB160 M 2 -2/15 95 1140 210 740 655 605 100 385 100 1240 1190 490 440 265 240 160 385 530 30 260 440 100 4-φ24
YB132S 1 -2/5.5 80 1020 190 660 510 475 100 385 100 1095 1060 450 400 210 240 132 315 470 30 217 377 85 4-φ24 YB90 L -4/1.5 95 1020 190 660 385 340 100 500 100 1085 1040 450 400 160 225 160 195 355 30 245 445 155 4-φ24
YB132S 2 -2/7.5 80 1020 190 660 510 475 100 385 100 1095 1060 450 400 210 240 132 315 470 30 217 377 85 4-φ24 YB100 L 1 -4/2.2 95 1020 190 660 430 380 100 500 100 1130 1080 450 400 180 225 160 245 380 30 245 445 145 4-φ24
YB160M 1 -2/11 80 1140 210 740 655 605 100 385 100 1240 1190 490 440 265 240 132 385 530 30 232 392 72 4-φ24 IH100-80-160 YB100 L 2 -4/3 95 1020 190 660 430 380 100 500 100 1130 1080 450 400 180 225 160 245 380 30 245 445 145 4-φ24
YB802-4/0.75 80 920 170 600 330 290 100 385 100 915 875 390 350 150 225 160 175 340 30 245 425 165 4-φ19 YB112 M -4/4 95 1020 190 660 460 400 100 500 100 1160 1100 450 400 190 225 160 265 400 30 245 445 133 4-φ24
IH80-65-160
YB90S-4/1.1 80 920 170 600 360 315 100 385 100 945 900 390 350 160 225 160 195 355 30 245 425 155 4-φ19 YB132 S 2 -2/7.5 95 1140 210 740 510 475 100 500 100 1210 1175 490 440 210 240 160 315 470 30 260 460 128 4-φ24

14
-14- IH SERIES IH SERIES 15
-15-
IH Single Stage Chemical Pump

安装尺寸表Ｉｎｓｔａｌｌａｔｉｏｎｄｉｍｅｎｓｉｏｎ安装尺寸表Ｉｎｓｔａｌｌａｔｉｏｎｄｉｍｅｎｓｉｏｎ

/ * + , - . & ' / * + , - . & '

14
-14- IH SERIES IH SERIES 15
-15-
IH Single Stage Chemical Pump

安装尺寸表Ｉｎｓｔａｌｌａｔｉｏｎｄｉｍｅｎｓｉｏｎ安装尺寸表Ｉｎｓｔａｌｌａｔｉｏｎｄｉｍｅｎｓｉｏｎ

/ * + , - . & ' / * + , - . & '

Outline and installation dimension Outline and installation dimension
Motor type/power Motor type/power
pump type pump type
(kw) (kw)
A L1 L2 L3 L4 L5 a f x L6 L7 B2 B3 B4 B5 h1 h2 h3 h4 H H1 H2 n-d A L1 L2 L3 L4 L5 a f x L6 L7 B2 B3 B4 B5 h1 h2 h3 h4 H H1 H2 n-d
500 100 1355 1305 540 480 120 4-φ24 140 1650 1625 385 665 160 4-φ28
YB160 M 1 -2/11 95 1270 225 840 665 605 100 490 265 240 160 385 530 30 280 YB225M-2/45 110 1620 290 1060 840 815 140 530 660 600 345 290 225 530 670 40
500 100 1355 1305 540 480 120 4-φ24 140 1745 1740 385 665 135 4-φ28
YB160 M 2 -2/15 95 1270 225 840 665 605 100 490 265 240 160 385 530 30 280 YB250M-2/55 110 1620 290 1060 935 930 140 530 660 600 385 330 225 575 770 40
500 100 1395 1350 540 480 120 4-φ24 IH125-100-250 530 140 1820 1810 385 665 105 4-φ28
IH100-80-160 YB160 L 2 -2/18.5 95 1270 225 840 695 650 100 490 265 240 160 385 530 30 280 YB280S-2/75 110 1820 320 1200 1010 1000 140 730 670 410 330 225 640 830 40
840 730 670 100 500 100 1430 1370 540 490 285 240 160 430 565 30 280 480 100 4-φ24 320 1200 1060 1050 140 530 140 1870 1860 730 670 410 330 225 640 830 40 385 665 105 4-φ28
YB180 M -2/22 95 1270 225 YB280M-2/90 110 1820
500 100 1503 1475 610 500 100 4-φ28 140 1465 1415 370 685 210 4-φ24
YB200 L 1 -2/30 95 1420 250 940 803 775 100 550 315 290 160 475 625 40 300 YB160M-4/11 110 1270 225 840 655 605 140 530 540 490 265 240 250 385 530 40
500 140 1170 1120 490 440 180 225 180 245 380 30 280 505 180 4-φ24 530 140 1505 1460 610 550 265 240 250 385 530 40 370 685 210 4-φ24
YB100 L 1 -4/2.2 95 1140 210 740 430 380 100 YB160L-4/15 110 1420 250 940 695 650 140
380 100 500 140 1170 1120 490 440 180 225 180 245 380 30 280 505 180 4-φ24 730 670 140 530 140 1540 1480 610 550 285 240 250 430 565 40 390 705 210 4-φ28
YB100 L 2 -4/3 95 1140 210 740 430 YB180M-4/18.5 110 1420 250 940
500 140 1200 1140 490 505 168 4-φ24 140 1560 1520 390 705 210 4-φ28
YB112 M -4/4 95 1140 210 740 460 400 100 440 190 225 180 265 400 30 280 YB180L-4/22 110 1420 250 940 750 710 140 530 610 550 285 240 250 430 565 40
500 140 1250 1215 490 505 148 4-φ24 IH125-100-315 530 140 1613 1585 390 705 190 4-φ28
YB132 S -4/5.5 95 1140 210 740 510 475 100 440 210 225 180 315 475 30 280 YB200L-4/30 110 1420 250 940 803 775 140 610 550 315 290 250 475 625 40
500 140 1290 1255 490 440 210 225 180 315 475 30 280 505 148 4-φ24 140 530 140 1655 1630 610 550 345 290 250 530 670 40 390 705 165 4-φ28
YB132 M -4/7.5 95 1140 210 740 550 515 100 YB225S-4/37 110 1420 250 940 845 820
500 140 1395 1345 540 525 140 4-φ24 140 1820 1810 410 725 130 4-φ28
IH100-65-200 YB160 M 2 -2/15 95 1270 225 840 655 605 100 490 265 240 180 385 530 30 300 YB280S-2/75 110 1820 320 1200 1010 1000 140 530 730 670 410 330 250 640 830 40
500 140 1435 1390 540 525 140 4-φ24 140 1870 1860 410 725 130 4-φ28
YB160 L -2/18.5 95 1270 225 840 695 650 100 490 265 240 180 385 530 30 300 YB280M-2/90 110 1820 320 1200 1060 1050 140 530 730 670 410 330 250 640 830 40
500 140 1470 1410 540 490 285 240 180 430 565 30 300 525 120 4-φ28 530 140 1505 1460 660 600 265 240 280 385 530 40 440 795 280 4-φ28
YB180 M -2/22 95 1270 225 840 730 670 100 YB160L-4/15 130 1620 290 1060 695 650 140
940 803 775 100 500 140 1543 1515 610 550 315 290 180 475 625 40 320 545 120 4-φ28 290 1060 730 670 140 530 140 1540 1480 660 600 285 240 280 430 565 40 440 795 260 4-φ28
YB200 L 1 -2/30 95 1420 250 YB180M-4/18.5 130 1620
500 140 1543 1515 610 545 120 4-φ28 140 1560 1520 440 795 260 4-φ28
YB200 L 2 -2/37 95 1420 250 940 803 775 100 550 315 290 180 475 625 40 320 YB180L-4/22 130 1620 290 1060 750 710 140 530 660 600 285 240 280 430 565 40
500 140 1580 1555 610 550 345 290 180 530 670 40 320 545 95 4-φ28 530 140 1613 1585 660 600 315 290 280 475 625 40 440 795 240 4-φ28
YB225 M -2/45 95 1420 250 940 840 815 100 IH125-100-400 YB200L-4/30 130 1620 290 1060 803 775 140
430 380 125 500 140 1195 1145 490 440 180 225 200 245 380 30 300 550 200 4-φ24 1060 845 820 140 530 140 1655 1630 660 600 345 290 280 530 670 40 440 795 215 4-φ28
YB100 L 2 -4 /3 110 1140 210 740 YB225S-4/37 130 1620 290
500 140 1225 1165 490 550 188 4-φ24 140 1680 1655 440 795 215 4-φ28
YB112 M-4 /4 110 1140 210 740 460 400 125 440 190 225 200 265 400 30 300 YB225M-4/45 130 1620 290 1060 870 845 140 530 660 600 345 290 280 530 670 40
500 140 1275 1240 490 440 210 240 200 315 470 30 300 550 168 4-φ24 530 140 1745 1740 660 600 385 330 280 575 770 40 440 795 190 4-φ28
YB132 S -4/5.5 110 1140 210 740 510 475 125 YB250M-4/55 130 1620 290 1060 935 930 140
125 500 140 1315 1280 490 440 210 240 200 315 470 30 300 550 168 4-φ24 605 140 530 140 1465 1415 540 490 265 240 250 385 530 30 370 695 210 4-φ24
YB132 M -4/7.5 110 1140 210 740 550 575 YB160M-4/11 110 1270 225 840 655
500 140 1420 1370 540 570 160 4-φ24 140 1505 1460 370 695 210 4-φ28
YB160 M -4/11 110 1270 225 840 655 605 125 490 265 240 200 385 530 30 320 YB160L-4/15 110 1420 250 940 695 650 140 530 610 550 265 240 250 385 530 40
500 140 1460 1415 540 570 160 4-φ24 140 1540 1480 390 745 210 4-φ28
YB160 L -4/15 110 1270 225 840 695 650 125 490 265 240 200 385 530 30 320 YB180M-4/18.5 110 1420 250 940 730 670 140 530 610 550 285 240 250 430 565 40
IH100-65-250 500 140 1495 1435 540 570 140 4-φ24 IH150-125-250 530 140 1560 1520 610 550 285 240 250 430 565 40 390 745 210 4-φ28
YB180 M -2/22 110 1270 225 840 730 670 125 490 285 240 200 430 565 30 320 YB180L-4/22 110 1420 250 940 750 710 140
500 140 1570 1540 610 590 140 4-φ28 140 1613 1585 390 745 190 4-φ28
YB200 L 1 -2/30 110 1420 250 940 803 775 125 550 315 290 200 475 625 40 340 YB200L-4/30 110 1420 250 940 803 775 140 530 610 550 315 290 250 475 625 40
500 140 1570 1540 610 590 140 4-φ28 140 1655 1630 390 745 165 4-φ28
YB200 L 2 -2/37 110 1420 250 940 803 775 125 550 315 290 200 475 625 40 340 YB225S-4/37 110 1420 250 940 845 820 140 530 610 550 345 290 250 530 670 40
500 140 1635 1580 610 550 345 290 200 530 670 40 340 590 115 4-φ28 530 140 1540 1480 660 600 285 240 280 430 565 40 440 775 260 4-φ28
YB225 M -2/45 110 1420 250 940 870 815 125 YB180M-4/18.5 130 1620 290 1060 730 670 140
935 930 125 500 140 1700 1695 660 600 385 290 200 575 770 40 360 610 110 4-φ28 290 1060 750 710 140 530 140 1560 1520 660 600 285 240 280 430 565 40 440 775 260 4-φ28
YB250 M -2/55 110 1620 290 1060 YB180L-4/22 130 1620
500 140 1775 1765 730 610 80 4-φ28 140 1613 1585 440 775 240 4-φ28
YB280 S -2/75 110 1820 320 1200 1010 1000 125 670 410 330 200 640 830 40 360 YB200L-4/30 130 1620 290 1060 803 775 140 530 660 600 315 290 280 475 625 40
530 140 1305 1270 540 490 210 240 225 315 470 30 345 625 213 4-φ24 IH150-125-315 530 140 1650 1630 660 600 345 290 280 530 670 40 440 775 225 4-φ28
YB132 S -4/5.5 110 1270 225 840 510 475 125 YB225S-4/37 130 1620 290 1060 840 820 140
125 530 140 1345 1310 540 490 210 240 225 315 470 30 345 625 213 4-φ24 870 845 140 530 140 1680 1655 660 600 345 290 280 530 670 40 440 775 225 4-φ28
YB132 M -4/7.5 110 1270 225 840 550 515 YB225M-4/45 130 1620 290 1060
530 140 1450 1400 540 625 185 4-φ24 140 1745 1740 440 775 190 4-φ28
YB160 M -4/11 110 1270 225 840 655 605 125 490 265 240 225 385 530 30 345 YB250M-4/55 130 1620 290 1060 935 930 140 530 660 600 385 330 280 575 770 40
530 140 1490 1445 610 550 265 240 225 385 530 40 345 625 185 4-φ24 530 140 1613 1585 660 600 315 290 315 475 625 40 475 875 275 4-φ28
YB160 L -4/15 110 1420 250 940 695 650 125 YB200L-4/30 110 1620 290 1060 803 775 140
530 140 1525 1465 610 550 285 240 225 430 565 40 360 645 185 4-φ28 140 530 140 1655 1630 660 600 345 290 315 530 670 40 475 875 250 4-φ28
YB180 M -4/18.5 110 1420 250 940 730 670 125 YB225S-4/37 110 1620 290 1060 845 820
IH100-65-315 530 140 1525 1570 610 645 165 4-φ28 140 1680 1655 475 875 250 4-φ28
YB200 L 2 -2/37 110 1420 250 940 730 775 125 550 315 290 225 475 625 40 360 YB225M-4/45 110 1620 290 1060 870 845 140 530 660 600 345 290 315 530 670 40
530 140 1635 1610 660 665 160 4-φ28 IH150-125-400 140 1745 1740 475 875 225 4-φ28
YB225 M -2/45 110 1620 290 1060 870 815 125 600 345 290 225 530 670 40 385 YB250M-4/55 110 1620 290 1060 935 930 140 530 660 600 385 290 315 575 770 40
530 140 1730 1725 660 600 385 330 225 575 770 40 385 665 135 4-φ28 530 140 1820 1810 730 670 410 330 315 640 830 40 475 875 195 4-φ28
YB250 M -2/55 110 1620 290 1060 935 930 125 YB280S-4/75 110 1820 320 1200 1010 1000 140
1200 1010 1000 125 530 140 1805 1795 730 670 410 330 225 640 830 40 385 665 105 4-φ28 320 1200 1060 1050 140 530 140 1870 1860 730 670 410 330 315 640 830 40 475 875 195 4-φ28
YB280 S -2/75 110 1820 320 YB280M-4/90 110 1820
530 140 1860 1845 730 665 105 4-φ28 180 1620 1580 440 815 260 4-φ28
YB280 M -2/90 110 1820 320 1200 1060 1050 125 670 410 330 225 640 830 40 385 YB180L-4/22 130 1620 290 1060 750 710 160 530 660 600 285 240 280 430 565 40
500 140 1225 1165 490 440 190 225 200 265 400 30 300 580 188 4-φ24 530 180 1673 1645 660 600 315 290 280 475 625 40 440 815 240 4-φ28
YB112 M -4/4 110 1140 210 740 460 400 125 YB200L-4/30 130 1620 290 1060 803 775 160
475 125 500 140 1275 1240 490 440 210 240 200 315 470 30 300 580 168 4-φ24 840 820 160 530 180 1710 1690 660 600 345 290 280 530 670 40 440 815 215 4-φ28
YB132 S -4/5.5 110 1140 210 740 510 YB225S-4/37 130 1620 290 1060
500 140 1315 1280 490 580 168 4-φ24 IH200-150-250 180 1740 1715 440 815 215 4-φ28
YB132 M -4/7.5 110 1140 210 740 550 515 125 440 210 240 200 315 470 30 300 YB225M-4/45 130 1620 290 1060 870 845 160 530 660 600 345 290 280 530 670 40
500 140 1420 1370 540 490 265 240 200 385 530 30 320 600 160 4-φ24 530 180 1805 1800 660 600 385 330 280 575 770 40 440 815 190 4-φ28
YB160 M -4/11 110 1270 225 840 655 605 125 YB250M-4/55 130 1620 290 1060 935 930 160
500 140 1568 1540 610 550 315 290 200 475 625 40 340 620 140 4-φ28 160 530 180 1880 1870 730 670 410 330 280 640 830 40 440 815 160 4-φ28
IH125-100-200 YB200 L 1 -2/30 110 1420 250 940 803 775 125 YB280S-4/75 130 1820 320 1200 1010 1000
500 140 1568 1540 610 620 140 4-φ28 180 1813 1785 475 875 275 4-φ28
YB200 L 2 -2/37 110 1420 250 940 803 775 125 550 315 290 200 475 625 40 340 YB200L-4/30 130 1820 320 1200 803 775 160 670 730 670 315 290 315 475 625 40
500 140 1605 1580 610 620 115 4-φ28 180 1855 1830 345 290 315 530 670 40 475 875 250 4-φ28
YB225 M -2/45 110 1420 250 940 840 815 125 550 345 290 200 530 670 40 340 YB225S-4/37 130 1820 320 1200 845 820 160 670 730 670
500 140 1700 1695 660 600 385 330 200 575 770 40 360 640 110 4-φ28 670 180 1880 1855 730 670 345 290 315 530 670 40 475 875 250 4-φ28
YB250 M -2/55 110 1620 290 1060 935 930 125 YB225M-4/45 130 1820 320 1200 870 845 160
500 140 1775 1765 730 670 410 330 200 640 830 40 360 640 80 4-φ28 IH200-150-315 670 180 1945 1940 730 670 385 330 315 575 770 40 475 875 225 4-φ28
YB280 S -2/75 110 1820 320 1200 1010 1000 125 YB250M-4/55 130 1820 320 1200 935 930 160
530 140 1320 1285 540 625 213 4-φ24 180 2020 2010 410 330 315 640 830 40 475 875 195 4-φ28
YB132 S -4/5.5 110 1270 225 840 510 475 140 490 210 240 225 315 470 30 345 YB280S-4/75 130 1820 320 1200 1010 1000 160 670 730 670
530 140 1360 1325 540 490 210 240 225 315 470 30 345 625 213 4-φ24 670 180 2070 2060 730 670 410 330 315 640 830 40 475 875 195 4-φ28
YB132 M -4/7.5 110 1270 225 840 550 515 140 YB280M-4/90 130 1820 320 1200 1060 1050 160
655 605 140 530 140 1465 1415 540 490 265 240 225 385 530 30 345 625 185 4-φ24 1200 935 930 160 670 180 1945 1940 730 670 385 330 315 575 770 40 475 925 225 4-φ28
IH125-100-250 YB160 M -4/11 110 1270 225 840 YB250M-4/55 130 1820 320
530 140 1505 1460 610 240 225 385 530 30 345 625 185 4-φ24 180 2020 2010 730 670 410 330 315 640 830 40 475 925 195 4-φ28
YB160 L -4/15 110 1420 250 940 695 650 140 550 265 IH200-150-400 YB280S-4/75 130 1820 320 1200 1010 1000 160 670
530 140 1540 1480 610 550 285 240 225 430 565 40 365 645 185 4-φ28 670 180 2070 2060 730 670 410 330 315 640 830 40 475 925 195 4-φ28
YB180 M -4/18.5 110 1420 250 940 730 670 140 YB280M-4/90 130 1820 320 1200 1060 1050 160

16
-16- IH SERIES IH SERIES 17
-17-
IH Single Stage Chemical Pump

安装尺寸表Ｉｎｓｔａｌｌａｔｉｏｎｄｉｍｅｎｓｉｏｎ安装尺寸表Ｉｎｓｔａｌｌａｔｉｏｎｄｉｍｅｎｓｉｏｎ

/ * + , - . & ' / * + , - . & '

16
-16- IH SERIES IH SERIES 17
-17-
IH Single Stage Chemical Pump

水泵装配与拆卸Ｗａｔｅｒｐｕｍｐａｓｓｅｍｂｌｙａｎｄｄｉｓａｓｓｅｍｂｌｙ -.01 Installation description

1. Installation height of pump, length, diameter and flow rate
1、(ÿ0?#，(#、、z1l，
·¸¹º»¼½¾¿ÀÁÂ¸ÃÄ， Before assembly, please check whether there are defects of pipes shall be as calculated, to reduce unnecessary loss.
on parts affecting assembly and clean. f X( 。 2. For long-distance transfer, large pipe diameters are preferred.
ÅÆÇÈÉ， ¸。
1. Ti g h t e n a l l c o u p l i n g b o l t s a n d s c r e w b l o c k s o n t o t h e 2、Y1。(1(£¤， Support of pipes of the pump shall be available, and the pump
1、Ê¼ ËÌÍÎÏ、ÐÑÒÓÔÕ·Öº corresponding parts in advance.
tu(³{2«，。 shall not bear the weight of pipes, in order to prevent damages
¿。 2. Place“O”r ing, paper cushion, hair felt onto corresponding
on the pump.
parts in advance. 3、304102( 。
2、Ê¼ ËO×Ø、Ù、ÚÛÒÓÜÝ·Öº 3. If it is to install a reversing valve on a drain pipe, it shall be
3. Install seal rings, stuffing, stuffing rings, stiffing cover into
¿。 installed outside of the gate valve.
the pump cover in the sequence in advance.
3、Ê¼ ËÞß、Þß、Þßàá 4. Install rolling bearing onto spindle, and install into the
¸âã。 suspended frame, close cover to press on the rolling bearing,
then screw coupling bolts onto the spindle.
4、Ëäåæ¸â，ç¸âã，è
5. Install spindle sleeve into the spindle, install pump cover 水泵启动、停止与运转Ｗａｔｅｒｐｕｍｐｓｔａｒｔ，ｓｔｏｐａｎｄｗｏｒｋ
，Õäåæ，Å·éÍÎÏ。 onto the s us pended frame, then install impellers, lock
56 Start
5、Ëé¸â，èË¸â，çèË gaskets, impeller nuts and tighten, finally, install the parts
1. Before coupling the pump, check whether the rotation
、êåÙØ、 ¸ÅÔÕ，!Ë
above into the pump body, and tighten the coupling bolts on 1、º·FGÎ¹YHIåFZJ/KLMY，
direction of motor is correct, rotation of pump is agile.
pump body and pump cover.
ëì¸â"ã，ÅÔÕ"íÍÎ JåKL[\。 2. Close the gate valve on output pipe.
During the assembly procedure above, some small parts,
Ï。 such as flat key, oil baffle disc,“O”ring in water baffle ring 2、]^_NOPQR。 3. Pour water into pump, or use vacuum to draw water.
4. Turn on pow er supply, w hen pump r eaches its normal
·ë¸#$%，îïðñ&ò、ó'ô、ó( bearing and so on, are likely to be omitted or assembled wrongly, 3、/ãS`()Tabc(。
please pay attention to that. rotation speed, open the gate valves on output pipes gradually,
ØéãO×Øõö÷ø)¸ù ú ，º*Ó+û。 4、ÎdIe，fUâMgJV，èhijk_N
The disassembly of a pump is in the reversed sequence and adjust according to actual requirements. When gate
üý ú,- .¸ ú þ/ 。 of assembly approximately. OPQR。ÅWXâYZ[\l。·_NO valves on output pipes are closed, continuous work period
of pump shall not be more than 3 minutes.
QR]^ml]，Ín\^_`abc
Stop
水泵安装Ｗａｔｅｒｐｕｍｐｉｎｓｔａｌｌａｔｉｏｎ #3Òo。
1. Gradually close the gate valve on output pipe, and turn off
78 power supply.
ÿ0JNO(Po1QR³XDE，S Installation is very important to operation and service life
2. If ambient temperature is below 0℃, drain out water in the
ÿ01TU VWX o。 of a pump, therefore, please install and adjust a pump carefully. 1、opqrs«(，et。 pump, to avoid cracking by being frozen.
Installation and adjustment
-.234 1. Clear off oil stain and dirt on the base, and put the base on 2、3¡S#&0℃，1uv'5，S。 3. If it will not be used for a long time, please disassemble the

ground. pump, clean, add oil, and pack before storage.

1、 !"«(b#1v$，!"52%«。 3、34C7，1uwxy«b，0:。
2. Use gradienter to check the horizontal degree of base, and Work
2、7'A&67!"('A#，tu7'()A。 9 1. During start and operation, please check whether reading
wedge irons are allowed to be used to adjust.
3、7'*+,!"1%-§8./。 3. Pour cement into base and bolt holes of feet. on instruments are normal, whether bearing is overheated,
1、2dp=P， Vªeqr&¬st，
4、'*90167!"1%-§8./12:， 4. When cement is dried, check whether bolts of base and feet whether there is water leakage from stuffing, and whether
are loosened, tighten in a proper way, and check horizontal f1uv，gh1i'=(w:1xy4 vibration and noises of pump are normal, please handle in
l`;<%-§8，³367'A#。 degree again. 1Uj，3zu{|jkl，1=Ym4。 time when abnormal situations occur.
5、4!"(£5A、'-=eµ-(A，> 5. Clean the support grounds under base, ground under feet 2. Maximum temperature of bearing shall be no more than 80℃,
of water pump and motor feet, and install water pump and 2、 fS#?&80℃， fS#JKM<
'1eµÿ0?!"«6。 and bearing temperature shall not be higher than ambient
motor onto the base. S#40℃。
6、7 89¢1:5@/(¢;，67' <eµ temperature by more than 40℃.
6. A clearance shall be kept between shaft couplers, check
3、ghUj，i'1} {I~(。 3. When stuffing is normal, water leakage shall be of minor
=1@>，^7?A@ABC+´。 whether water pump spindle and motor spindle are on a same
amount and even.
D{7 8( E«F、GH(IBJK0.1mm， center line, thin cushion sheets can be used to adjust. 4、 fb1:52Ujn«，0?s，
4. Oil level of bearing shall be normal, not too high or too low,
Measure the difference between up-and-down length and
7 8L¢;@M«1C(¢;IBJ Y1=Yb。 add the lubricating oil in time when it is too low.
left-to-right length of external circle of coupler shall not be
K0.3mm。 more than 0.1mm. Between two couplers, difference between 5、3 ¡<l¥(¢; 1_3 5. When abrasion on the coupling part between a seal ring and
maximum clearance and minimum clearance on a same circle an impeller is too serious, please replace with a new seal ring.
( ¡。
shall not be greater than 0.3mm.

18
-18- IH SERIES IH SERIES 19
-19-
IH Single Stage Chemical Pump

水泵装配与拆卸Ｗａｔｅｒｐｕｍｐａｓｓｅｍｂｌｙａｎｄｄｉｓａｓｓｅｍｂｌｙ -.01 Installation description

ground. pump, clean, add oil, and pack before storage.

18
-18- IH SERIES IH SERIES 19
-19-
IH Single Stage Chemical Pump

故障原因及排除方法Ｆａｉｌｕｒｅｓｃａｕｓｅｓａｎｄｔｒｏｕｂｌｅｓｈｏｏｔｉｎｇ管路损耗参考表Ｒｅｆｅｒｅｎｃｅｔａｂｌｅｆｏｒｐｉｐｅｌｉｎｅｌｏｓｓ

Meximum flow rate

?@ :; < = > $ Troubleshooting

EF
Failure Possible causes

(m/s)

2.41

2.45

2.49

2.69

2.72

2.71
200

3.0
1.p，¹¿À®¹Á
a、+((a a、è(ã+(
ÂÃÄv。
b、 (Oø b、ÔÕÑøÌ

180

6.2

2.4
Pump not suck water, both pointers of

Maximum flow
a. Water input the water pump is not enough. a. Input more water into the water pump.

EF
manometer and vacuometter severely b. Air leakage on water input pipes and instruments. b. Tighten and block the air leakage parts.

133.3

192.0
(L/s)

30.0

43.0

60.0

83.0
160

4.9

2.0
jump.

a、Rjk)Ñ a、&)¦R

140

1.5
3.7
2.p，À®¹ÅÆº b、(O b、Ç)¦(O

Note: The pipeline loss would be made greatly increased once the limit is over.
Pipeline diameter
ÇÈÀ®。 c、( c、«(

ABCD
130

3.3

1.3
a、Bottom valve not opened or blocked up.

(mm)
a. Adjust or replace bottom valve.

125

150

175

200

250

300
Pump not suck water, high v-
acuum shown on vacuometer. b、Too large resistance of the suction pipeline. b. Clean or replace water input pipes.

120
c、too high suction height.

1.1
8.5

2.8
c. Reduce water input height.

Abrasion loss table of straight pipes (for estimation), length loss of a 100m straight pipe is calculated as a newly forged steel pipe as the standard, to old pipes, it shall be doubled.
a、N(O a、Ç) ¡(O

Meximum flow rate

110

2.3
7.2

0.9
b、ZJ/a b、½¾IFZ/

EF
3.f¬f¥'¦'。 c、Ñ c、Ç

(m/s)

2.04

1.69

2.12

2.01

2.26

2.33
0.76
100

6.1

1.9
No water out though pressu- d、(JVa d、¤ª(JV
re is shown on manometer. a、Too large resistance on outlet pipeline. a. Clean or shorten water pipe.

0.61
b、Uncorrect rotating direction.

1.5
4.7
9.6
90

É：ÊLËÌÍrsÎÏÆÐÑi。
b. Check rotation direction of motor.

Pipeline diameter Maximum flow

c、lmpeller blocked up. c. Clean impeller

EF
d、Insufficient rotating speed. d. Increase rotation speed of water pump.

0.49

(L/s)
7.7

3.7

1.2

4.17

6.67

10.0

18.4
80

2.5
1
Capacity (L/s)
a、)OPÑ a、ÇíOP

0.93

0.37
5.8

2.9
70
b、)# b、¦§¿
4、z{|})~$]。
Pump flow rate reduced or pump
c、JVa c、W¨â©HJV

0.68

0.27

ABCD
2.1
4.3
9.4
60
a. Impellers or pipes are jammed. a. Clean impellers and pipes.
lift drops.

(mm)

100
b. Too serious abrasion on seal rings or impellers. b. Replace damaged parts.

75
c. Rotation speed is too low. c. Adjust to rate rotation speed.

0.48

0.19
1.5
2.9
6.4
50
A、ÞßÕ，Þß
a、ÜÞß

®OÆ¯Â（°ÄÅT）O100m®O¯Ç±²³È´Oµ¶，ÉOªÊ。
0.93
10.7

0.12
0.30
4.2

1.9
40
b、Æ

B¬100 100=10000mm=10m rjÈ，

b、F£Æ

the above table, the loss of the straight pipe is 1.3m each 100m, then the one for 100mm is 0.13m,
which is converted into 100 times that of the pipe s diameter. Suppose the flow is 8L/s, looked into
ßOàác8L/sâQ¹， rã100mÎÏ1.3m，ä10mÎÏ0.13m，{å100mm

Note:For instance, a 100mmdiameter pipe, the foot valve has a 100 100=10000mm=10m diameter when
c、z{#
5.'¬§(>。 c、]ðN(QR

0.53
1.05

0.18

0.07
19.4

2.3
5.9
a. Stuffing cover is too tightened, and stiffing

Multiple in case of unopen

Partial block-up multipled

Too large power loss of pump. a. Loosen cover of stuffing.

:ÚÛÜiÙ
case is heated.

×ØÓiÙ
b. Eliminate mechanical abrasion.

N
b. Impellers and seal rings are abraded.

Remark
0.37

0.12
0.74
4.1

1.6
13
25
c. Reduce opening of water output gate valve.
c. Flow rate is too high.

M
0.07
0.26
a、(Oã# a、|ð( ¡(O

1.1

0.5
2.7
8.6
20
6.'v¥¨yj，' b、(Obø b、ÑøÌ

that is, for a 100mm foot valve with a flow 8L/s, its head low is 0.13m.
c、z{# c、WXN¡R¢¢·£H\l¤¥ã¢T

0.13
0.58

0.27
21.6
«'。

1.3
6.8
15

Convert into the times of the

Abnormal sound inside of pump, no a. Too great resistance in water input pipe. a. Reduce height of water input, and shorten length of water input pipes.

diameter of a straight pipe

b. Air ingress into water input pipe. b. Block air leakage parts.

0.63

0.11
0.26
water out of it.

2.1
9.6
10

IJABCDKL
c. Flow rate is too great, which leads to air cavities. c. Adjust output valves, to make pump work within the stipulated range.

_Õ，àác8L/sn，äÎÏæç0.13m。
0.16
a、、a&

1.3
5.9

0.4
13
a、、&

100

100
13

25
b、IFa·î%

r，_ÕÞ&100Ù
b、(IF
c、Ïå

0.23
7.1

3.3

0.8
29
7、(å。 c、ÔÕÏ

6
Water pump vibration is too serious. a. Air cavities in pump, impellers are not balanced.
a. Eliminate air cavities, balance impellers.
b. Pump spindle and motor are not on a same
b. Adjust coaxiality of water pump and motor.

3.2

1.6

0.4
13
55
4
center line.
c. Tighten foot bolts.
c. Foot bolts are loosened. 13.0

3.1

0.8

0.4
14
2

Fully opened gate valve

a、'a)#，)
a、½¾'{，ÇæÅ'

Standard elbow

É：Ý²100mm
32.7

b、(IFa
3.5

0.8

ÓÔÕ

Òr

Back valve

Foot valve
G H
1

Variety

ÖMÕ
8、æ#。 b、%

_Õ
a. Lubricating oil is not enough, or too much,
Overheat on bearing. a. Check oil amount, clean bearing and replace oil.
diameter

or degraded.
(mm)
AD

b. Align center line of spindle.

Pipe

100

150

200

250

300
125

175
50
25

75
b. Water pump and motor spindle are not coaxial.

-20-
20 IH SERIES IH SERIES -21-
21
IH Single Stage Chemical Pump

Meximum flow rate

?@ :; < = > $ Troubleshooting

EF
Failure Possible causes

(m/s)

2.41

2.45

2.49

2.69

2.72

2.71
200

3.0
1.p，¹¿À®¹Á
a、+((a a、è(ã+(
ÂÃÄv。
b、 (Oø b、ÔÕÑøÌ

180

6.2

2.4
Pump not suck water, both pointers of

Maximum flow
a. Water input the water pump is not enough. a. Input more water into the water pump.

EF
manometer and vacuometter severely b. Air leakage on water input pipes and instruments. b. Tighten and block the air leakage parts.

133.3

192.0
(L/s)

30.0

43.0

60.0

83.0
160

4.9

2.0
jump.

a、Rjk)Ñ a、&)¦R

140

1.5
3.7
2.p，À®¹ÅÆº b、(O b、Ç)¦(O

Note: The pipeline loss would be made greatly increased once the limit is over.
Pipeline diameter
ÇÈÀ®。 c、( c、«(

ABCD
130

3.3

1.3
a、Bottom valve not opened or blocked up.

(mm)
a. Adjust or replace bottom valve.

125

150

175

200

250

300
Pump not suck water, high v-
acuum shown on vacuometer. b、Too large resistance of the suction pipeline. b. Clean or replace water input pipes.

120
c、too high suction height.

1.1
8.5

2.8
c. Reduce water input height.

Meximum flow rate

110

2.3
7.2

0.9
b、ZJ/a b、½¾IFZ/

EF
3.f¬f¥'¦'。 c、Ñ c、Ç

(m/s)

2.04

1.69

2.12

2.01

2.26

2.33
0.76
100

6.1

1.9
No water out though pressu- d、(JVa d、¤ª(JV
re is shown on manometer. a、Too large resistance on outlet pipeline. a. Clean or shorten water pipe.

0.61
b、Uncorrect rotating direction.

1.5
4.7
9.6
90

É：ÊLËÌÍrsÎÏÆÐÑi。
b. Check rotation direction of motor.

Pipeline diameter Maximum flow

c、lmpeller blocked up. c. Clean impeller

EF
d、Insufficient rotating speed. d. Increase rotation speed of water pump.

0.49

(L/s)
7.7

3.7

1.2

4.17

6.67

10.0

18.4
80

2.5
1
Capacity (L/s)
a、)OPÑ a、ÇíOP

0.93

0.37
5.8

0.68

0.27

ABCD
2.1
4.3
9.4
60
a. Impellers or pipes are jammed. a. Clean impellers and pipes.
lift drops.

(mm)

100
b. Too serious abrasion on seal rings or impellers. b. Replace damaged parts.

75
c. Rotation speed is too low. c. Adjust to rate rotation speed.

0.48

0.19
1.5
2.9
6.4
50
A、ÞßÕ，Þß
a、ÜÞß

®OÆ¯Â（°ÄÅT）O100m®O¯Ç±²³È´Oµ¶，ÉOªÊ。
0.93
10.7

0.12
0.30
4.2

1.9
40
b、Æ

B¬100 100=10000mm=10m rjÈ，

b、F£Æ

Note:For instance, a 100mmdiameter pipe, the foot valve has a 100 100=10000mm=10m diameter when
c、z{#
5.'¬§(>。 c、]ðN(QR

0.53
1.05

0.18

0.07
19.4

2.3
5.9
a. Stuffing cover is too tightened, and stiffing

Multiple in case of unopen

Partial block-up multipled

Too large power loss of pump. a. Loosen cover of stuffing.

:ÚÛÜiÙ
case is heated.

×ØÓiÙ
b. Eliminate mechanical abrasion.

N
b. Impellers and seal rings are abraded.

Remark
0.37

0.12
0.74
4.1

1.6
13
25
c. Reduce opening of water output gate valve.
c. Flow rate is too high.

M
0.07
0.26
a、(Oã# a、|ð( ¡(O

1.1

0.5
2.7
8.6
20
6.'v¥¨yj，' b、(Obø b、ÑøÌ

that is, for a 100mm foot valve with a flow 8L/s, its head low is 0.13m.
c、z{# c、WXN¡R¢¢·£H\l¤¥ã¢T

0.13
0.58

0.27
21.6
«'。

1.3
6.8
15

Convert into the times of the

Abnormal sound inside of pump, no a. Too great resistance in water input pipe. a. Reduce height of water input, and shorten length of water input pipes.

diameter of a straight pipe

b. Air ingress into water input pipe. b. Block air leakage parts.

0.63

0.11
0.26
water out of it.

2.1
9.6
10

IJABCDKL
c. Flow rate is too great, which leads to air cavities. c. Adjust output valves, to make pump work within the stipulated range.

_Õ，àác8L/sn，äÎÏæç0.13m。
0.16
a、、a&

1.3
5.9

0.4
13
a、、&

100

100
13

25
b、IFa·î%

r，_ÕÞ&100Ù
b、(IF
c、Ïå

0.23
7.1

3.3

0.8
29
7、(å。 c、ÔÕÏ

3.2

1.6

0.4
13
55
4
center line.
c. Tighten foot bolts.
c. Foot bolts are loosened. 13.0

3.1

0.8

0.4
14
2

Fully opened gate valve

a、'a)#，)
a、½¾'{，ÇæÅ'

Standard elbow

É：Ý²100mm
32.7

b、(IFa
3.5

0.8

ÓÔÕ

Òr

Back valve

Foot valve
G H
1

Variety

ÖMÕ
8、æ#。 b、%

_Õ
a. Lubricating oil is not enough, or too much,
Overheat on bearing. a. Check oil amount, clean bearing and replace oil.
diameter

or degraded.
(mm)
AD

b. Align center line of spindle.

Pipe

100

150

200

250

300
125

175
50
25

75
b. Water pump and motor spindle are not coaxial.

-20-
20 IH SERIES IH SERIES -21-
21
汉森泵业集团股份有限公司
ShangHai Hanthing Pump Group CO.,LTD

Model IHF Single-stage Single-suction Fluorine-plastic Alloy Chemical Centrifugal Pump

Operation installation

Please carefully read the operation instructions before use of the product.
CONTENTS

01
Outline

01
Construction and feature of pump

01
Model meaning

02
Construction drawing

02
Performance curve drawing

03
Performance table

06
Dimension drawing/table of flange

07
Out-form installation dimension drawing and table

09
Precautions at installation

10
Pump star, running and stop

11
Repair and maintenance of pump

12
Failures causes and troubleshooting

13
Reference table for pipeline loss
MODEL IHF SINGLE-STAGE SINGLE-SUCTION FLUORINE-PLASTIC ALLOY CHEMICAL CENTRIFUGAL PUMP 汉森 Hanthing

OUTLINE

IHF Model IHF pump is a single-stage single-suction fluoric

plastic alloy chemical centrifugal pump, designe d per the
national standard and designed and made per the processing
workmanship for the non-metal pump. This pump features
anti-corrosion, wearability, high temperature resista nce, non-
-85~200
aging, high mechanical strength, non-toxin decomposition and
wide temperature range of use, with the medium temperature
to be transported at -85 ~ 200 , and is applicable for the
liquid transportation, waste water treatment and souring etc.
technological flows in chemical industry, pharmacy, petroleum,
metallurgy, electric power, electric-plating, acid cleaning, far m
chemicals, paper-making etc. trades. This pump can be used
to transport sulfuric acid, hydrochloric acid, nitric acid, acetic
acid, hydrofluoric acid, nitro-hydrochloric acid, strong o xidative
and strong corrosive media and is one of the most advanced
corrosion-proof equipments at present.

CONSTRUCTION AND FEATURE OF PUMP

IHF For model IHF fluoric plastic centrifugal pump, the

casing is a metal crust interlined with poly-perfluoroethylene-
(F46) propylene (F46), both impeller and pump cover are fo rmed
with a metal insert wrapped with fluoric plastic outside and
then integrally sintered and pressed, the shaft seal is an ext-
99.9% ernally mountable sylphon bellows mechanical seal, the static
ring is made of 99.9% alumina ceramic or silicon carbide and
the dynamic ring is made of tetrafluoro filling material or
silicon carbide and its features come at an advanced and rea-
sonable structure, strong corrosion resistance, strict and reliable
sealing, stable work, low noise and a long duration.

MODEL MEANING

IH F 50 - 32 - 160 A

Impeller via first cutting

160mm Nominal diameter of impeller

32mm Outlet diameter 50mm
50mm Inlet diameter 65mm
The flowing parts of the pump are fluorine plastic ones

Series code of international standard chemical pump

01
汉森 Hanthing

CONSTRUCTION DRAWING

1 Pump casing HT200 5 9 Dynamic ring

Pump cover interlining F46 Silicon nitride

2 45# Steel 6 Pump cover HT200 10 Pump shaft 3Cr13

Impeller frame

3 Impeller 7 1Cr18Ni9Ti 11 Bearing body HT200

F46 Gland of mechanical seal

4 Pump casing interlining

8 Static ring 12 Clutch HT200
F46 Aluminum oxide ceramic

PERFORMANCE CURVE DRAWING

02
MODEL IHF SINGLE-STAGE SINGLE-SUCTION FLUORINE-PLASTIC ALLOY CHEMICAL CENTRIFUGAL PUMP 汉森 Hanthing

PERFORMANCE TABLE

Capacity Power
Speed Head Eff. Impeller Weight
Model NPSH(r) diameter
(r/min) (m 3/h) (L/s) (m) (%) (m) (mm)
(kg)
Shaft Motor power
3.5 0.97 21 40 0.50
2900 5 1.39 20 44 0.62 1.5 2.3 128 80
6.5 1.80 18 42 0.76
IHF32-25-125
1.75 0.49 5.25 37 0.068
1450 2.5 0.69 5 40 0.085 0.75 2.3 128 75
3.25 0.90 4.5 38 0.105
3.1 0.06 17.6 38 0.70
IHF32-25-125A 2900 4.5 1.25 16 41 0.48 1.1 2.3 115 75
5.8 1.61 14.4 40 0.57
3.5 0.97 33 34 0.93
2900 5 1.39 32 40 1.10 2.2 2.3 162 90
6.5 1.80 30 42 1.26
IHF32-25-160
1.75 0.49 8.25 30 0.131
1450 2.5 0.69 8 38 0.143 0.75 2.3 162 75
3.25 0.90 7.5 40 0.166
3.1 0.86 29 30 0.81
IHF32-25-160A 2900 4.5 1.25 28 35 0.97 1.5 2.3 152 80
5.8 1.61 26 36 1.14
4.4 1.22 21 40 0.63
2900 6.5 1.80 20 45 0.79 2.2 2.5 128 90
8.3 2.31 18 43 0.95
IHF40-32-125
2.2 0.60 5.25 37 0.085
1450 3.25 0.90 5 41 0.108 0.75 2.5 128 75
4.15 1.15 4.5 40 0.127
3.9 1.08 17.6 38 0.49
IHF40-32-125A 2900 5.6 1.56 16 42 0.58 1.5 2.5 115 80
7.4 2.06 14.4 40 0.72
4.4 1.22 33 34 1.16
2900 6.5 1.80 32 40 1.42 2.2 2.5 162 90
8.3 2.31 30 39 1.71
IHF40-32-160
2.2 0.60 8.25 33 0.14
1450 2.5 0.90 8 36 0.15 0.75 2.5 162 75
3.25 1.15 7.5 37 0.18
3.9 1.08 29 32 0.96
IHF40-32-160A 2900 5.6 1.56 28 38 1.23 1.5 2.5 152 80
7.4 2.06 26 37 1.41
8.8 1.08 21.5 45 1.15
2900 12.5 1.56 20 54 1.26 2.2 3.0 128 90
16.3 2.06 17.5 53 1.47
IHF50-32-125
4.4 1.2 5.37 37 0.17
1450 6.25 1.74 5 46 0.18 0.75 3.0 128 75
8.15 2.26 4.37 45 0.22
8 2.22 17 42 0.88
IHF50-32-125A 2900 11 3.05 16 52 0.92 1.5 3.0 115 80
14.5 4.03 14 51 1.08
8.8 2.44 33 41 1.93
2900 12.5 3.47 32 48 2.27 4 3.0 160 120
16.3 4.53 30 47 2.84
IHF50-32-160
4.4 1.2 8..25 31 0.31
1450 6.25 1.74 8 41 0.33 0.75 3.0 160 90
8.15 2.26 7.5 42 0.39
8.2 2.28 29 39 1.16
IHF50-32-160A 2900 11.7 3.25 28 47 1.88 3 3.0 150 100
15.2 4.22 26 46 2.34
8.8 2.44 52 34 3.70
2900 12.5 3.47 50 42 4.10 7.5 3.0 190 150
16.3 4.53 48 41 5.20
IHF50-32-200
4.4 1.2 13 25 0.62
1450 6.25 1.74 12.5 33 0.65 1.5 3.0 190 100
8.15 2.26 12 36 0.74

03
汉森 Hanthing

PERFORMANCE TABLE

Capacity Power
Speed Head Eff. Impeller Weight
Model NPSH(r) diameter
(r/min) (m 3/h) (L/s) (m) (%) (m) (mm)
(kg)
Shaft Motor power
8.2 2.28 45 31 3.24
IHF50-32-200A 2900 11.7 3.25 44 40 3.50 5.5 3.0 178 130
15.2 4.22 42 39 4.45
8.8 2.44 82 27 7.30
2900 12.5 3.47 80 35 7.80 11 3.0 250 220
16.3 4.53 76 34 10
IHF50-32-250
4.4 1.2 20.5 20 1.22
1450 6.25 1.74 20 27 1.26 2.2 3.0 250 100
8.15 2.26 19 30 1.40
8.2 2.28 71 25 4.53
IHF50-32-250A 2900 11.7 3.25 70 34 6.56 7.5 3.0 235 170
15.2 4.22 68 33 8.52
17.5 4.86 21.5 56 1.83
2900 25 6.94 20 64 2.13 3 3.5 128 100
32 9.0 17.5 63 2.42
IHF65-50-125
8.75 2.43 5.37 45 0.28
1450 12.5 3.47 5 57 0.30 0.75 3.5 128 80
16 4.44 4.37 58 0.33
15.6 4.33 17 53 1.36
IHF65-50-1125A 2900 22.3 6.19 16 62 1.57 2.2 3.5 115 90
29 8.1 14 61 1.79
17.5 4.86 33 50 3.15
2900 25 6.94 32 59 3.69 5.5 3.5 160 145
32 9.0 27.5 57 4.20
IHF65-50-160
8.75 2.43 8.25 40 0.49
1450 12.5 3.47 8 53 0.51 1.1 3.5 160 90
16 4.44 6.87 51 0.59
16.4 4.56 29 48 2.70
IHF65-50-160A 2900 23.3 6.5 28 58 3.10 4 3.5 150 130
30.4 8.44 24 56 3.54
17.5 4.86 52 45 5.50
2900 25 6.94 50 54 6.30 11 3.5 195 225
32 9.0 45.5 54 7.35
IHF65-40-200
8.75 2.43 13 36 0.86
1450 12.5 3.47 12.5 46 0.93 1.5 3.5 195 100
16 4.44 11.4 47 1.05
16.4 4.56 46 43 4.30
IHF65-40-200A 2900 23.3 6.5 44 53 5.00 7.5 3.5 183 170
30.4 8.44 40 52 5.20
17.5 4.86 82 39 10.10
2900 25 6.94 80 50 10.90 18.5 3.5 250 240
32 9.0 76 52 12.74
IHF65-40-250
8.75 2.43 20.5 32 1.52
1450 12.5 3.47 20 42 1.62 3 3.5 250 130
16 4.44 19 44 1.88
16.4 4.56 71 36 8.80
IHF65-40-250A 2900 23.3 6.5 70 48 9.30 15 3.5 235 230
30.4 8.44 68 50 11.25
35 9.72 21.5 64 3.20
2900 50 13.9 20 69 3.95 5.5 4.0 134 150
65 18.1 17 67 4.50
IHF80-65-125
17.5 4.86 5.37 54 0.47
1450 25 6.9 5 64 0.53 1.1 4.0 134 90
32.5 9.0 4.25 62 0.61
31 8.6 17 62 2.30
IHF80-65-125A 2900 45 12.5 16 68 2.88 4 4.0 120 130
58 16.1 14 67 3.30
35 9.72 33 60 5.24
IHF80-65-160 2900 50 13.9 32 68 6.41 11 4.0 165 220
65 18.1 27.5 67 7.27

04
MODEL IHF SINGLE-STAGE SINGLE-SUCTION FLUORINE-PLASTIC ALLOY CHEMICAL CENTRIFUGAL PUMP 汉森 Hanthing

PERFORMANCE TABLE

Capacity Power
Speed Head Eff. Impeller Weight
Model NPSH(r) diameter
(r/min) (m 3/h) (L/s) (m) (%) (m) (mm)
(kg)
Shaft Motor power
17.5 4.86 8.25 50 0.78
IHF80-65-160 1450 25 6.9 8 62 0.88 1.5 4.0 165 100
32.5 9.0 6.88 61 1.00
31 8.6 29 58 4.10
IHF80-65-160A 2900 45 12.5 28 67 5.12 7.5 4.0 165 190
58 16.1 24 66 5.34
35 9.72 52 52 9.53
2900 50 13.9 50 64 10.64 15 4.0 197 230
65 18.1 45.5 65 12.39
IHF80-50-200
17.5 4.86 13 51 1.21
1450 25 6.9 12.5 59 1.44 3 4.0 197 130
32.5 9.0 11.38 58 1.74
31 8.6 46 50 7.35
IHF80-50-200A 2900 45 12.5 44 63 8.56 11 4.0 185 220
58 16.1 40 62 10
35 9.72 82 40 19.40
2900 50 13.9 80 50 21.80 30 4.0 248 400
65 18.1 72 51 25
IHF80-50-250
17.5 4.86 20.5 40 2.40
1450 25 6.9 20 50 2.70 4 4.0 248 145
32.5 9.0 18 51 3.12
31 8.6 71.5 39 15.40
IHF80-50-250A 2900 45 12.5 70 50 17.60 22 4.0 232 310
58 16.1 63 51 19.90
70 19.4 23 70 6.26
2900 100 27.8 20 75 7.26 11 5.0 136 220
130 36.1 14 65 7.63
IHF100-80-125
35 9.7 5.75 65 0.85
1450 50 13.9 5 70 0.97 1.5 4.5 136 100
65 18.0 3.5 64 0.98
62.6 17.4 18 68 4.50
IHF100-80-125A 2900 89 24.7 16 73 5.30 7.5 5.0 122 200
116 32.2 11 65 5.74
70 19.4 34 68 9.53
2900 100 27.8 32 74 11.78 15 5.0 170 230
130 36.1 24 65 13.03
IHF100-80-160
35 9.7 8.5 60 1.35
1450 50 13.9 8 68 1.60 2.2 4.5 170 110
65 18.0 6.5 67 1.69
65.4 18.2 32 66 8.60
IHF100-80-160A 2900 93.5 26 28 73 9.30 11 5.0 159 220
121 33.6 21 65 10.6
70 19.4 52 64 15.50
2900 100 27.8 50 72 18.91 360 5.0 210 400
130 36.1 42 71 20.94
IHF100-65-200
35 9.7 13 60 2.06
1450 50 13.9 12.5 68 2.50 4 4.5 210 140
65 18.0 10.5 63 2.95
65.4 18.2 46 63 13
IHF100-65-200A 2900 93.5 26 44 71 15.02 22 5.0 197 310
121 33.6 37 70 17.40
70 19.4 87 62 26.60
2900 100 27.8 80 69 31.60 45 4.0 255 450
130 36.1 68 68 35
IHF100-65-250
30 8.33 21.2 58 3.00
1450 50 13.9 20 63 4.30 5.5 4.5 255 170
60 16.7 18.5 62 4.72
65.4 16.2 76.5 60 20.25
IHF100-65-250A 2900 93.5 26 70 68 26.2 37 4.5 238 410
121 33.6 59 67 28

05
汉森 Hanthing

DIMENSION DRAWING OF FLANGE

DIMENSION TABLE OF FLANGE

Inlet flange Outlet flange

Product type DN 1 d1 D 11 D1 b1 n 1 -d 01 DN 2 d2 D 12 D2 b2 n 2 -d 02
IHF32-25-125 32 70 90 120 16 4-14 25 60 75 100 16 4-14

IHF32-25-160 32 70 90 120 16 4-14 25 60 75 100 16 4-14

IHF40-32-125 40 80 100 130 18 4-14 32 70 90 120 16 4-14

IHF40-32-160 40 80 100 130 18 4-14 32 70 90 120 16 4-14

IHF50-32-125 50 102 125 165 20 4-18 32 80 100 140 18 4-18

IHF50-32-160 50 102 125 165 20 4-18 32 80 100 140 18 4-18

IHF50-32-200 50 102 125 165 20 4-18 32 80 100 140 18 4-18

IHF50-32-250 50 102 125 165 20 4-18 32 80 100 140 18 4-18

IHF65-50-125 65 122 145 185 20 4-18 50 102 125 165 20 4-18

IHF65-50-160 65 122 145 185 20 4-18 50 102 125 165 20 4-18

IHF65-40-200 65 122 145 185 20 4-18 40 88 110 150 18 4-18

IHF65-40-250 65 122 145 185 20 4-18 40 88 110 150 18 4-18

IHF80-65-125 80 133 160 200 20 8-18 65 122 145 185 20 4-18

IHF80-65-160 80 133 160 200 20 8-18 65 122 145 185 20 4-18

IHF80-50-200 80 133 160 200 20 8-18 50 102 125 165 20 4-18

IHF80-50-250 80 133 160 200 20 8-18 50 102 125 165 20 4-18

IHF100-80-125 100 158 180 220 22 8-18 80 133 160 200 20 8-18

IHF100-80-160 100 158 180 220 22 8-18 80 133 160 200 20 8-18

IHF100-65-200 100 158 180 220 22 8-18 65 122 145 185 20 4-18

IHF100-65-250 100 158 180 220 22 8-18 65 122 145 185 20 4-18

06
MODEL IHF SINGLE-STAGE SINGLE-SUCTION FLUORINE-PLASTIC ALLOY CHEMICAL CENTRIFUGAL PUMP 汉森 Hanthing

OUT-FORM INSTALLATION DIMENSION DRAWING

OUT-FORM AND INSTALLATION DIMENSION TABLE

Product type
Motor type L B S P A W T H h f 4- d
/power (kW)
Y802-4/0.75 780 720 470 120 70 320 270 350 220 80 4-19
IHF32-25-125 Y802-2/1.1 780 720 470 120 70 320 270 350 220 80 4-19
Y90S-2/1.5 790 720 470 120 70 320 270 350 220 80 4-19
Y802-4/0.75 780 730 470 100 70 320 270 350 230 80 4-19
IHF32-25-160 Y90S-2/1.5 790 740 530 100 70 350 300 370 230 80 4-19
Y90L-2/2.2 810 740 530 100 70 350 300 370 230 80 4-19
Y802-4/0.75 780 720 470 120 70 320 270 350 220 80 4-19
IHF40-32-125 Y90S-2/1.5 790 720 470 120 70 320 270 350 220 80 4-19
Y90L-2/2.2 820 720 470 120 70 320 270 350 220 80 4-19
Y802-4/0.75 780 740 530 100 70 350 300 360 230 80 4-19
IHF40-32-160 Y90S-2/1.5 800 740 530 100 70 350 300 360 230 80 4-19
Y90L-2/2.2 810 740 530 100 70 350 300 360 230 80 4-19
Y802-4/0.75 800 740 530 100 70 320 270 360 210 80 4-19
IHF50-32-125 Y90S-2/1.5 810 740 530 100 70 320 270 360 210 80 4-19
Y90L-2/2.2 820 740 530 100 70 320 270 360 210 80 4-19
Y802-4/0.75 820 800 560 130 70 350 300 370 210 80 4-19
IHF50-32-160 Y100L-2/3 900 800 560 120 70 350 300 380 220 80 4-19
Y112M-2/4 920 800 560 120 70 350 300 380 220 80 4-19
Y90L-4/1.5 850 800 560 130 70 350 300 410 230 80 4-19
IHF50-32-200 Y132S 1 -2/5.5 970 850 560 140 70 390 340 440 260 80 4-19
Y132S 2 -2/7.5 980 850 560 140 70 390 340 440 260 80 4-19
Y100L 1 -4/2.2 1030 920 560 200 80 450 400 520 290 100 4-24
IHF50-32-250 Y132S 2 -2/7.5 1180 1170 775 200 80 450 400 520 290 100 4-24
Y160M 1 -2/11 1280 1170 775 200 80 450 400 520 290 100 4-24

07
汉森 Hanthing

OUT-FORM AND INSTALLATION DIMENSION TABLE

Product type
Motor type L B S P A W T H h f 4- d
/power (kW)
Y802-4/0.75 800 750 530 130 70 350 300 360 220 80 4-19

IHF65-50-125 Y90L-2/2.2 850 740 530 100 70 320 270 350 210 80 4-19

Y100L-2/3 870 760 550 100 70 320 270 360 220 80 4-19

Y90S-4/1.1 870 800 560 120 70 390 340 400 235 80 4-19

IHF65-50-160 Y112M-2/4 900 800 560 120 70 350 300 370 235 80 4-19

Y132S 1 -2/5.5 960 840 600 120 70 390 340 400 235 80 4-19

Y90L-4/1.5 990 880 560 140 70 390 340 380 260 100 4-19

IHF65-40-200 Y132S 2 -2/7.5 1120 850 560 140 70 390 340 380 260 100 4-19

Y160M 1 -2/11 1140 980 660 150 70 450 400 440 260 100 4-19

Y100L 2 -4/3 1030 920 560 200 80 450 400 520 290 100 4-19

IHF65-40-250 Y160M 2 -2/15 1180 1170 775 200 80 450 400 520 290 100 4-19

Y160L-2/18.5 1330 1170 775 200 80 450 400 520 290 100 4-24

Y90S-4/1.1 820 800 560 120 70 350 300 370 235 100 4-24

IHF80-65-125 Y112M-2/4 900 800 560 120 70 350 300 370 235 100 4-24

Y132S 1 -2/5.5 980 840 600 120 70 390 340 400 235 100 4-24

Y90L-4/1.5 840 800 560 130 70 390 340 380 260 100 4-24

IHF80-65-160 Y132S 2 -2/7.5 1040 850 560 140 70 390 340 440 260 100 4-24

Y160M 1 -2/11 1140 980 660 160 70 460 400 440 260 100 4-24

Y100L2-4/3 940 850 560 140 70 390 340 380 260 100 4-24
IHF80-50-200 Y160M 1 -2/11 1000 960 660 150 60 450 400 460 270 100 4-24

Y160M 2 -2/15 1020 960 660 150 70 450 400 460 270 100 4-24

Y112M-4/4 1050 920 560 200 80 450 400 510 285 100 4-24
IHF80-50-250 Y180M-2/22 1250 1050 750 150 80 480 430 510 285 100 4-24

Y200L 1 -2/30 1320 1120 820 150 80 510 460 510 285 100 4-24

Y90L-4/1.5 960 800 560 130 80 390 340 440 260 100 4-24
IHF100-80-125 Y132S 2 -2/7.5 1040 850 560 140 80 390 340 440 260 100 4-24

Y160M 1 -2/11 1140 980 660 150 80 460 400 440 260 100 4-24

Y100L 1 -4/2.2 940 850 560 140 80 390 340 460 260 100 4-24
IHF100-80-160 Y160M 1 -2/11 1140 980 660 150 80 450 400 460 260 100 4-24

Y160M 2 -2/15 1140 980 660 150 80 450 400 460 260 100 4-24

Y112M-4/4 1050 920 560 200 80 480 430 525 300 100 4-24
IHF100-65-200 Y180M-2/22 1250 1050 750 150 80 480 430 525 300 100 4-24

Y200L 1 -2/30 1320 1120 820 150 80 510 460 525 300 100 4-24

Y132S 1 -4/5.5 1140 950 560 160 80 480 430 550 300 100 4-24
IHF100-65-250 Y200L 2 -2/37 1380 1220 880 200 80 540 490 550 300 100 4-24

Y225L-2/45 1780 1450 1280 200 80 610 550 550 300 100 4-24

08
MODEL IHF SINGLE-STAGE SINGLE-SUCTION FLUORINE-PLASTIC ALLOY CHEMICAL CENTRIFUGAL PUMP 汉森 Hanthing

PRECAUTIONS AT INSTALLATION

1 1. It acts an important influence on the normal work of

the pump whether the pump is reasonably mounted, so both
installation and correction must be carefully carried out.
2 2. Preset the foot bolts and make the concrete basis acc-
ording to the installation dimensions.
3. When the basis cement gets solid, mount the pump
3 onto it and level both pump and motor with a leveler and, if
unleveled, use sizing blocks to regulate and then tighten the
bolts.
4. Check if the moving parts on the pump are jammed
4 and collided and check the concentricity between the shafts
of both pump and motor, which can be made correctly by
means of adju sting with a sheet, and finally check the moving
clutch, which shall be lightly movable without collision.
5. Set both suck-in and vomiting pipes with a stand se-
5 parately and do not le t the pump directly bearing the weight
of the pipelines to prevent it from damage.
6. When the pump is mounted over the liquid level
6 ( (within the permitted suction stroke range), mount a foot valve
on the end of the suck-in pi peline and set a liquid-pouring
)
screwed hole or a valve on the vomiting one for the purpose
of pouring liquid into the pump before start; when the pump
is mounted be low the level, mount a control valve and a filter
on the suck-in pipeline to prevent impurities from being
sucked into the pump, with the filtering area bigger than t he
3-4 area of the pipeline by 3-4 times.
7. For the pump of a high head, a check valve shall also
7
be mounted on t he pipeline at the outside end of the exit flow
control valve so as to prevent the water hammer destruction
8 at an abrupt stop.
8. The installation height of the pump shall conform the
net positive suction head of it and both pipeline loss and
9 medium temperature need to be considered.
9. When the pump is used with a suction stroke, mount
a foot valve at the end of the incoming water pipe, do not
leave too many curved conduits with both inlet and outlet
pipelines and make sure of non-water, non-air leaks.

09
汉森 Hanthing

10 10. It will be b etter for a filtering screen to be set on the

inlet pipeline so as to prevent im purities from getting into the
3-4
impeller and the effective area of the screen shall be 3-4 times
that of the incoming water pipe so as to ensure the liquid to
go through smoothly.
11
11. For the sake of safety and convenient use and care,
mount a regulating valve on both inlet and outlet pipelines of
the pump unit and a pressure gauge near the pump exit so as
to make it sure for the pump to work within the rated range
and ensure normal work and duration of it.
12 12. When the inlet needs to be expanded for connection,
use an eccentric reduced pipeline joint.

PUMP STAR, RUNNING AND STOP

Start
1. When the pump is used with a suction stroke, that is
1
the inlet comes as a negative pressure, first pour water into the
pipeline or lead water in with a vacuum pump to have both
pump and inlet pipeline full of water. The inlet pipeline must
be sealed without air leak.
2. Close the gate valve and the cork on the pressure
2 gauge on the outlet pipeline to reduce the starting current.
3. Turn the rotor several turns to have the bearing lubri-
cated, check if both impeller and seal ring are collided with
3 each other when moving and, if unmovable, do not start the
pump till finding out the cause.
4. Carry out a trial start, the motor shall be moving in
the direction identical to that the arrow on the pump indicates.
4 Open the cork on the pressure gauge.
5. When the rotor gets to the normal run and the pressure
gauge shows a pressure, gradually open the exit valve and
5
adjust it to the desired working condition.

Run
1. When the pump is at running, check the readouts on
the meters and have the pump work with both flow and head
1 set on the name plate as can as possible, without working with
a big flow.
2. Check the cu rrent value of the motor at a regular time
interval and it shall not be over the rated one.
2

10
MODEL IHF SINGLE-STAGE SINGLE-SUCTION FLUORINE-PLASTIC ALLOY CHEMICAL CENTRIFUGAL PUMP 汉森 Hanthing

3 75 3. The bearing temperature shall not be over 75 and

over the outside one by 35 .
35
4. Loosen the packing gland when the pump starts running
4 and then set it properly when the expanding graphite or packing
gets expanded completely.
5. Replace the easily wearable parts on time when they
5 are worn out excessively.
6 6. In case of an abnormality, stop the pump and check
the cause.

Stop
1. Close the gate valve on the outcoming water pipeline
1
and put on the cork on the vacuum meter.
2 2. Stop the motor and then close the cork on the pressure
3 gauge.
3. In winter or a cold season, drain out the liquid inside
of the pump to prevent it from frozen crack.
4 4. In case of a long time stop, disassemble the pump,
clean and lubricate it and then keep it properly.

REPAIR AND MAINTENANCE OF PUMP

1 1. Check both pump and motor and replace the easily

wearable parts periodically.
2
2. Often lubricate the bearing box with quality calcium
based lubri cating grease to have it in a good lubricated status.
3. In case of a long time stop, in addition to getting the
3
corrosive liquid inside of the pump drained out completely,
much attention shall be paid to the cleaning of the part s and
the runner therein and cut-off of the power.
4. Never have the pump idly running.
4
5. Set a filter at the entrance of the pump if there are
5 solid grains in the medium.

11
汉森 Hanthing

FAILURES CAUSES AND TROUBLESHOOTING

Failure Possible causes Troubleshooting

a a
1 Insufficient poured water Check if water leaks from the foot valve, then pour
b water sufficiently
The pump does not suck water,
while the pointers of both pre-
Air leaks from the connection between the pipeline b
and the meter Tighten the air-leak point
ssure gauge and vacuum meter
jump severely. c c
Too high suction stroke Lower it

a a
2 The foot valve is not opened or already blocked Check the foot valve
b b
The pump does not suck water, Replace it
Too heavy resistance to the suction pipeline
while a high vacuum is sh own
c c
on the vacuum meter.
The filter is blocked Clear it up

a a
Too heavy resistance to the outcoming water pipe Check or make the pipe shorter
3 b b
Wrong moving direction Check the motor, change two phases
No water is out, though there
c c
is a pressure shown on the pre-
The valve on the outlet pipe is not opened Open the outlet valve
ssure gauge.
d d
The impeller is blocked Clear up the filth therein

a a
Air has been sucked in Check the air-leak point and repair it
b b
Insufficient submerged depth, because the level Extend the suction pipe to make it deeper
4 becomes reduced
Unable to get the designed flow.
c
c Disassemble the impeller and clear up the foreign
Inside of the impeller is blocked by foreign matters matters
d d
The rotor is partially worn out severely Replace the seal ring

a a
The packing is pressed too tightly and gets heated Loosen it properly
b b
Excessive flow Make the opening of the gate valve a little bit
5 c smaller
Excessively consumed power Collision happens between the rotary body and the c
by the pump. crust Do adjustment
d d
The pump bearing is worn out Replace it
e e
The pump shaft gets bent Replace or make it straight

a
a
Disassemble the impeller and clear up the foreign
The impeller is blocked partially
matters
b
b
The impeller gets damaged
Replace it
c
6 c
Excessive flow
Excessively severe vibration Make the opening of the outlet valve a little bit bigger
d
with the pump. d
The pump shaft is eccentric to the motor shaft
Correct it
e
e
The bearing gets damaged
Replace it
f
f
Air is mixed in, cavitation erosion happens
Change the suck-in position, improve the suction pipe

12
Capacity (L/s)
Pipe
diameter
(mm) 1 2 4 6 8 10

25 32.7 13.0 ( )100m

38 3.5 14 55 15 20 Brief table for the frictional loss of a straight pipe(for evaluation), the
lost meters of a 100m straight pipe takes the newly cast iron pipe as
50 the standard and multiple for the old one.
0.8 3.1 13 29 25 30

65 1.6 3.2 7.1 13 20 40 50

75 0.4 0.8 3.3 5.9 9.6 21.6 60 70

100 0.23 0.8 1.3 2.1 6.8 8.6 13 19.4 80 90

125 0.23 0.4 0.63 1.3 2.7 4.1 5.9 10.7 100 110

150 0.16 0.26 0.58 1.1 1.6 2.3 4.2 6.4 9.4 120 130

175 0.11 0.27 0.5 0.74 1.05 1.9 2.9 4.3 5.8 7.7 9.6 140 160

200 0.13 0.26 0.37 0.53 0.93 1.5 2.1 2.9 3.7 4.7 6.1 7.2 8.5 180 200

250 0.07 0.12 0.18 0.30 0.48 0.68 0.93 1.2 1.5 1.9 2.3 2.8 3.3 3.7 4.9 5.2

300 0.07 0.12 0.19 0.27 0.37 0.49 0.61 0.76 0.9 1.1 1.3 1.5 2.0 2.4 3.0
REFERENCE TABLE FOR PIPELINE LOSS

The length of a straight pipe converted into from both valve and elbow(each) LIMIT OF THE MAXIMUN FLOW FOR A PIPE WITH A CERTAIN DIAMETER

Convert into the times of the Pipeline diameter Maximum flow Maximum flow rate Pipeline diameter Maximum flow Maximum flow rate
Variety Remark
diameter of a straight pipe (m/s) (m/s)
(mm) (L/s) (mm) (L/s)
12
Fully opened gate valve Multiple in case of unopen 25 1 2.04 125 30.0 2.44

25
Standard elbow 38 2.5 1.69 150 43.0 2.45

100
Back valve 50 4.17 2.12 175 60.0 2.49
MODEL IHF SINGLE-STAGE SINGLE-SUCTION FLUORINE-PLASTIC ALLOY CHEMICAL CENTRIFUGAL PUMP

100
Foot valve Partial block-up multipled 65 6.67 2.01 200 83.3 2.69
100mm 100 100 100=10000mm=10m
75 10.0 2.26 250 133.0 2.72
8L/s 100m 1.3m 10m 0.13m
100mm 8L/s 0.13m
100 18.4 2.33 300 192.0 2.71
Note:For instance, a 100mmdiameter pipe, the foot valve has a 100 100=10000mm=10m diameter
when which is converted into 100 times that of the pipe's diameter. Suppose the flow is 8L/s,
looked into the above table, the loss of the straight pipe is 1.3m each 100m, then the one for
100mm is 0.13m, that is, for a 100mm foot valve with a flow 8L/s, its head low is 0.13m. Note The pipeline loss would be made greatly increased once the limit is over.
汉森 Hanthing

MST IH Chemical Pump Catalogue
No ratings yet
MST IH Chemical Pump Catalogue
25 pages
IH Stainless Steel Centrifugal Pump
No ratings yet
IH Stainless Steel Centrifugal Pump
6 pages
Ih Chemical Pump
No ratings yet
Ih Chemical Pump
24 pages
IHH Chemical Pump For Corrosive Liquid Stainless Steel-Guomei Pump
No ratings yet
IHH Chemical Pump For Corrosive Liquid Stainless Steel-Guomei Pump
12 pages
凯泉-第六代KQL单级泵说明书2019.10 E
No ratings yet
凯泉-第六代KQL单级泵说明书2019.10 E
16 pages
Chemical Pump Operation Manual
No ratings yet
Chemical Pump Operation Manual
25 pages
HF-Medie-portate EN 50Hz
No ratings yet
HF-Medie-portate EN 50Hz
4 pages
IH Stainless Steel Chemical Pump Brochure
No ratings yet
IH Stainless Steel Chemical Pump Brochure
2 pages
HF-Alte-portate EN 50Hz
No ratings yet
HF-Alte-portate EN 50Hz
4 pages
Pedrollo Close Coupled Centrifugal Pump - Medium Flow Rate - HF
No ratings yet
Pedrollo Close Coupled Centrifugal Pump - Medium Flow Rate - HF
4 pages
High Flow Centrifugal Pumps Overview
No ratings yet
High Flow Centrifugal Pumps Overview
4 pages
High Flow Centrifugal Pumps Guide
No ratings yet
High Flow Centrifugal Pumps Guide
4 pages
Advanced IHF Fluorine Centrifugal Pumps
No ratings yet
Advanced IHF Fluorine Centrifugal Pumps
13 pages
Pedrollo Centrifugal Pump HF1
No ratings yet
Pedrollo Centrifugal Pump HF1
4 pages
All 3
No ratings yet
All 3
32 pages
Effluent Treatment Pumps
No ratings yet
Effluent Treatment Pumps
12 pages
316 Stainless Steel Centrifugal Pumps
No ratings yet
316 Stainless Steel Centrifugal Pumps
60 pages
S H/ HP: Eries P P
No ratings yet
S H/ HP: Eries P P
59 pages
Self Priming Non Clog Mud Pump
No ratings yet
Self Priming Non Clog Mud Pump
8 pages
TECHNICAL Lowara SH Series Sh-Td-En2
No ratings yet
TECHNICAL Lowara SH Series Sh-Td-En2
112 pages
Hm-Hms Series: HM Applications (AISI 304 + Technopolymer)
No ratings yet
Hm-Hms Series: HM Applications (AISI 304 + Technopolymer)
5 pages
Pumpsense HS/HST Splitcase Pumps
100% (1)
Pumpsense HS/HST Splitcase Pumps
12 pages
Materiales Bombas
No ratings yet
Materiales Bombas
132 pages
FH Series: 60 HZ 60 HZ 60 HZ 60 HZ 60 HZ
No ratings yet
FH Series: 60 HZ 60 HZ 60 HZ 60 HZ 60 HZ
132 pages
Industrial Pump Solutions
No ratings yet
Industrial Pump Solutions
9 pages
Fire Fighting Catalog
No ratings yet
Fire Fighting Catalog
16 pages
SH SHI&SHN 60Hz
No ratings yet
SH SHI&SHN 60Hz
31 pages
156 - 3 - Ebara Enh 1014 - 2
No ratings yet
156 - 3 - Ebara Enh 1014 - 2
2 pages
German Centrifugal Pump Manufacturer
No ratings yet
German Centrifugal Pump Manufacturer
37 pages
IH Chemical Pump Installation Manual
No ratings yet
IH Chemical Pump Installation Manual
7 pages
06 SCT Extended PDF
100% (2)
06 SCT Extended PDF
40 pages
NC Pumps
No ratings yet
NC Pumps
16 pages
VND Plastico Pumps Overview
No ratings yet
VND Plastico Pumps Overview
16 pages
Essential Parameters for Pump Selection
100% (3)
Essential Parameters for Pump Selection
62 pages
Ansi Hi 1.1-1.2
No ratings yet
Ansi Hi 1.1-1.2
74 pages
Pedrollo Centrifugal Pump HF
No ratings yet
Pedrollo Centrifugal Pump HF
5 pages
CPS Series Horizontal Split Case Pump
100% (1)
CPS Series Horizontal Split Case Pump
48 pages
Bombas PCM
No ratings yet
Bombas PCM
12 pages
Ch Каталог
No ratings yet
Ch Каталог
36 pages
OHH OHHL SingleStageEndSuctionProcessPumps E00697
No ratings yet
OHH OHHL SingleStageEndSuctionProcessPumps E00697
6 pages
Horizontal Centrifugal Pump - According To Iso 2858: Chemical Pumps Via Labirinto 159 - 25125 BRESCIA - ITALY
No ratings yet
Horizontal Centrifugal Pump - According To Iso 2858: Chemical Pumps Via Labirinto 159 - 25125 BRESCIA - ITALY
12 pages
Multistage Centrifugal Pump Ss 316
No ratings yet
Multistage Centrifugal Pump Ss 316
4 pages
Pan World Magnetic Pump Overview
No ratings yet
Pan World Magnetic Pump Overview
16 pages
Industrial Pumps - Performance Data Booklet - 2024-06
No ratings yet
Industrial Pumps - Performance Data Booklet - 2024-06
140 pages
1.1 Water Pump Design Scheme
No ratings yet
1.1 Water Pump Design Scheme
30 pages
Grundfos CH
No ratings yet
Grundfos CH
12 pages
46 10 HSC Brochure - PDF - Marked Up
No ratings yet
46 10 HSC Brochure - PDF - Marked Up
4 pages
转子泵Rotary lobe pump PDF
No ratings yet
转子泵Rotary lobe pump PDF
6 pages
Pump Performance and Selection Guide
100% (6)
Pump Performance and Selection Guide
235 pages
Pompes de Process
No ratings yet
Pompes de Process
20 pages
FH TD en
No ratings yet
FH TD en
136 pages
Edwards EH Mechanical Booster Pump Users Manual
No ratings yet
Edwards EH Mechanical Booster Pump Users Manual
44 pages
SI31768
No ratings yet
SI31768
8 pages
1GAX2GAXS
No ratings yet
1GAX2GAXS
2 pages
Model IC Catalogue
No ratings yet
Model IC Catalogue
9 pages
PDF Notes and Tips: Plane Requirements
No ratings yet
PDF Notes and Tips: Plane Requirements
20 pages
Original Novachord Service Manual
No ratings yet
Original Novachord Service Manual
46 pages
Chief Mechanic Interview Guide
100% (1)
Chief Mechanic Interview Guide
3 pages
Schematic Mcu Card 6 For stm32
No ratings yet
Schematic Mcu Card 6 For stm32
1 page
Power Semiconductor Drives Question Bank
No ratings yet
Power Semiconductor Drives Question Bank
16 pages
Esmagamento - ASTM D5961 - D5961M - 17
No ratings yet
Esmagamento - ASTM D5961 - D5961M - 17
4 pages
01 02 36 Volt Diagram
No ratings yet
01 02 36 Volt Diagram
1 page
Transient Analysis of Rotary Drilling Rig in Response To Sudden Breaking of Wire Rope For Drilling Pipe Lifting
No ratings yet
Transient Analysis of Rotary Drilling Rig in Response To Sudden Breaking of Wire Rope For Drilling Pipe Lifting
7 pages
DigiProg II Vehicle Compatibility List
No ratings yet
DigiProg II Vehicle Compatibility List
5 pages
Robotics: Flexible Tactile Sensing
No ratings yet
Robotics: Flexible Tactile Sensing
23 pages
1008-OAJ-MS-R0 1017 - HDPE Pipes Installation
No ratings yet
1008-OAJ-MS-R0 1017 - HDPE Pipes Installation
9 pages
EMD 645 Parts Catalog 302 Part 1
0% (1)
EMD 645 Parts Catalog 302 Part 1
164 pages
DTR8.8 - Procedure To Upgrade The Main FW by Using RS232 Port
No ratings yet
DTR8.8 - Procedure To Upgrade The Main FW by Using RS232 Port
4 pages
07 Extractors
No ratings yet
07 Extractors
5 pages
Oracle AP - Zero Dollar Payments Process
No ratings yet
Oracle AP - Zero Dollar Payments Process
14 pages
AISC - (L3) Design of The Moment Frames
No ratings yet
AISC - (L3) Design of The Moment Frames
66 pages
Numatics FRL Flexiblok Catalog PDF
No ratings yet
Numatics FRL Flexiblok Catalog PDF
33 pages
Analogue-Practicals (29.11.2023)
No ratings yet
Analogue-Practicals (29.11.2023)
11 pages
HP Inc Ps42419ha 9244
No ratings yet
HP Inc Ps42419ha 9244
1 page
Operations Manual Item: Bv1000 & Bv1005: Benchmixer™ & Mortexer™
No ratings yet
Operations Manual Item: Bv1000 & Bv1005: Benchmixer™ & Mortexer™
1 page
SteelBook ConversionTables
No ratings yet
SteelBook ConversionTables
3 pages
Ramdump Adsp 2018-03-06 17-48-47 Props
100% (1)
Ramdump Adsp 2018-03-06 17-48-47 Props
10 pages
Predatorsstallspecs - FLEJADORA JDC
No ratings yet
Predatorsstallspecs - FLEJADORA JDC
67 pages
10.1016 - j.jcsr.2017.06.018 Exposed Column Base Plate Strong Axis Connections For Small Size Steel Construction
No ratings yet
10.1016 - j.jcsr.2017.06.018 Exposed Column Base Plate Strong Axis Connections For Small Size Steel Construction
11 pages
NCM-W Y NCM-F Installation Manual PDF
No ratings yet
NCM-W Y NCM-F Installation Manual PDF
8 pages
Pulverized Coal Tech Advances
No ratings yet
Pulverized Coal Tech Advances
6 pages
Round Bend U-Bolts: 8%Row6Shflàfdwlrqv U-Bolts & 2 Nuts U-Bolts, Plates & 2 Nuts
No ratings yet
Round Bend U-Bolts: 8%Row6Shflàfdwlrqv U-Bolts & 2 Nuts U-Bolts, Plates & 2 Nuts
5 pages
Wind Load Calculation for Pitched Roof
No ratings yet
Wind Load Calculation for Pitched Roof
13 pages
Libro Fire Engineering Command & Control of Fires & Emergencias
No ratings yet
Libro Fire Engineering Command & Control of Fires & Emergencias
306 pages
Class 12 & JEE Chemistry Notes
No ratings yet
Class 12 & JEE Chemistry Notes
6 pages

IH Series Chemical Pump Catalog

Uploaded by

IH Series Chemical Pump Catalog

Uploaded by

TECHNICAL DATA INCLUDED IN THIS BROCHURE MAY BE CHANGE FROM TIME

TO TIME DUE TO THE PRODUCT IMPROVEMENTS UNDERTAKES BY THE

ShangHai HanThing pump Co.,ltd

结构说明 Ｓｔｒｕｃｔｕｒｅｓ ｄｅｓｃｒｉｐｔｉｏｎ 结构简图 Ｓｔｒｕｃｔｕｒｅ ｄｒａｗｉｎｇ

K$)FG]。 is designed, so that it is unnecessary to disassemble the

5。459'，#$ which is a conventional structural pattern in the world.

1   Pump casing 4 §¨ Impeller nut 7 ¢£¤ Mid.bracket

2   Impeller 5  © Pump cover 8 shaft

3  ¡ Seal-ring 6  ¥¦ Seal part 9 ¤¥¦ Hanging stand

结构说明 Ｓｔｒｕｃｔｕｒｅｓ ｄｅｓｃｒｉｐｔｉｏｎ 结构简图 Ｓｔｒｕｃｔｕｒｅ ｄｒａｗｉｎｇ

K$)FG]。 is designed, so that it is unnecessary to disassemble the

5。459'，#$ which is a conventional structural pattern in the world.

1   Pump casing 4 §¨ Impeller nut 7 ¢£¤ Mid.bracket

2   Impeller 5  © Pump cover 8 shaft

3  ¡ Seal-ring 6  ¥¦ Seal part 9 ¤¥¦ Hanging stand

型谱图 Ａｔｌａｓ ｏｆ ｓｔｙｌｅ ＩＨ型性能参数 ＩＨ ｔｙｐｅ ｐｕｍｐ ｐｅｒｆｏｒｍａｎｃｅ

Without brackets, means the ns when n=1450r/min.

With brackets, means the ns when n=2900r/min,

7.5 2.08 23 1.09 43 2

12.5 3.47 20 2900

6.8 1.89 18.8 0.87 40 2

13.6 3.78 14.7 1.16 47 2.5

7.5 2.08 34.5 2.13 33 2

7.5 2.08 7.5

6.8 1.89 28.5 1.76 30 2

11.3 3.14 26.4 2900 1.85 3 44 48 2

6.8 1.89 6.2 0.28 41 2.5

7.5 2.08 51.8 3.78 28 2

7.5 2.08 12 0.68 36

6.8 1.89 42.7 3.16 25 2

11.3 3.14 41 2900 3.24 4 38 58 2

13.6 3.78 39.5 3.57 41 2.5

6.8 1.89 9.9 0.54 34 2.5

7.5 2.08 82 7.28 23 2

6.3 1.75 20 1450 1.27 2.2 27 92 2

7.5 2.08 19.6 1.29 31 2.5

7 1.94 71.9 6.84 20 2

11.7 3.25 70 2900 6.97 11 32 92 2

5.9 1.64 17.5 1450 1.25 1.5 25 92 2

7.02 1.95 17.2 1.18 27.9 2.5

6.6 1.83 63.6 5.71 20 2

60.9 6.64 33 2.5

15 4.17 21.3 1.85 47 2

30 8.33 18.6 2.41 63 2.5

12.5 3.47 5 1450 0.31 0.55 55 46 2

H(m) ª：«¬­®( >¯QRT'(>，^°±7²QR(³#1"#´，7´>(eµ。

型谱图 Ａｔｌａｓ ｏｆ ｓｔｙｌｅ ＩＨ型性能参数 ＩＨ ｔｙｐｅ ｐｕｍｐ ｐｅｒｆｏｒｍａｎｃｅ

Without brackets, means the ns when n=1450r/min.

With brackets, means the ns when n=2900r/min,

7.5 2.08 23 1.09 43 2

12.5 3.47 20 2900

6.8 1.89 18.8 0.87 40 2

13.6 3.78 14.7 1.16 47 2.5

7.5 2.08 34.5 2.13 33 2

7.5 2.08 7.5

6.8 1.89 28.5 1.76 30 2

11.3 3.14 26.4 2900 1.85 3 44 48 2

6.8 1.89 6.2 0.28 41 2.5

7.5 2.08 51.8 3.78 28 2

7.5 2.08 12 0.68 36

6.8 1.89 42.7 3.16 25 2

11.3 3.14 41 2900 3.24 4 38 58 2

13.6 3.78 39.5 3.57 41 2.5

6.8 1.89 9.9 0.54 34 2.5

7.5 2.08 82 7.28 23 2

6.3 1.75 20 1450 1.27 2.2 27 92 2

7.5 2.08 19.6 1.29 31 2.5

7 1.94 71.9 6.84 20 2

11.7 3.25 70 2900 6.97 11 32 92 2

5.9 1.64 17.5 1450 1.25 1.5 25 92 2

7.02 1.95 17.2 1.18 27.9 2.5

6.6 1.83 63.6 5.71 20 2

60.9 6.64 33 2.5

15 4.17 21.3 1.85 47 2

30 8.33 18.6 2.41 63 2.5

12.5 3.47 5 1450 0.31 0.55 55 46 2

结构说明Ｓｔｒｕｃｔｕｒｅｓｄｅｓｃｒｉｐｔｉｏｎ结构简图Ｓｔｒｕｃｔｕｒｅｄｒａｗｉｎｇ

K$)FG]。 is designed, so that it is unnecessary to disassemble the

5。459'，#$ which is a conventional structural pattern in the world.

1 Pump casing 4 §¨ Impeller nut 7 ¢£¤ Mid.bracket

2 Impeller 5 © Pump cover 8 shaft

3 ¡ Seal-ring 6 ¥¦ Seal part 9 ¤¥¦ Hanging stand

结构说明Ｓｔｒｕｃｔｕｒｅｓｄｅｓｃｒｉｐｔｉｏｎ结构简图Ｓｔｒｕｃｔｕｒｅｄｒａｗｉｎｇ

K$)FG]。 is designed, so that it is unnecessary to disassemble the

5。459'，#$ which is a conventional structural pattern in the world.

1 Pump casing 4 §¨ Impeller nut 7 ¢£¤ Mid.bracket

2 Impeller 5 © Pump cover 8 shaft

3 ¡ Seal-ring 6 ¥¦ Seal part 9 ¤¥¦ Hanging stand

型谱图ＡｔｌａｓｏｆｓｔｙｌｅＩＨ型性能参数ＩＨｔｙｐｅｐｕｍｐｐｅｒｆｏｒｍａｎｃｅ

H(m) ª：«¬®( >¯QRT'(>，^°±7²QR(³#1"#´，7´>(eµ。

型谱图ＡｔｌａｓｏｆｓｔｙｌｅＩＨ型性能参数ＩＨｔｙｐｅｐｕｍｐｐｅｒｆｏｒｍａｎｃｅ

H(m) ª：«¬®( >¯QRT'(>，^°±7²QR(³#1"#´，7´>(eµ。

ＩＨ型性能参数ＩＨｔｙｐｅｐｕｍｐｐｅｒｆｏｒｍａｎｃｅＩＨ型性能参数ＩＨｔｙｐｅｐｕｍｐｐｅｒｆｏｒｍａｎｃｅ

ª ：«¬®( > ¯ Q R T ' ( > ， ^ ° ± 7 ² Q R ( ³ # 1 " # ´ ， 7 ´ > ( e µ 。 ª：«¬®( >¯QRT'(>，^°±7²QR(³#1"#´，7´>(eµ。

ＩＨ型性能参数ＩＨｔｙｐｅｐｕｍｐｐｅｒｆｏｒｍａｎｃｅＩＨ型性能参数ＩＨｔｙｐｅｐｕｍｐｐｅｒｆｏｒｍａｎｃｅ

ª ：«¬®( > ¯ Q R T ' ( > ， ^ ° ± 7 ² Q R ( ³ # 1 " # ´ ， 7 ´ > ( e µ 。 ª：«¬®( >¯QRT'(>，^°±7²QR(³#1"#´，7´>(eµ。

ＩＨ型性能参数ＩＨｔｙｐｅｐｕｍｐｐｅｒｆｏｒｍａｎｃｅＩＨ型性能参数ＩＨｔｙｐｅｐｕｍｐｐｅｒｆｏｒｍａｎｃｅ

ª ：«¬®( > ¯ Q R T ' ( > ， ^ ° ± 7 ² Q R ( ³ # 1 " # ´ ， 7 ´ > ( e µ 。 ª：«¬®( >¯QRT'(>，^°±7²QR(³#1"#´，7´>(eµ。

ＩＨ型性能参数ＩＨｔｙｐｅｐｕｍｐｐｅｒｆｏｒｍａｎｃｅＩＨ型性能参数ＩＨｔｙｐｅｐｕｍｐｐｅｒｆｏｒｍａｎｃｅ

ª ：«¬®( > ¯ Q R T ' ( > ， ^ ° ± 7 ² Q R ( ³ # 1 " # ´ ， 7 ´ > ( e µ 。 ª：«¬®( >¯QRT'(>，^°±7²QR(³#1"#´，7´>(eµ。

ＩＨ型性能参数ＩＨｔｙｐｅｐｕｍｐｐｅｒｆｏｒｍａｎｃｅ外形尺寸图Ｄｉｍｅｎｓｉｏｎｄｉａｇｒａｍ

99 27.5 24.7 11.29 59 2.5

ＩＨ型性能参数ＩＨｔｙｐｅｐｕｍｐｐｅｒｆｏｒｍａｎｃｅ外形尺寸图Ｄｉｍｅｎｓｉｏｎｄｉａｇｒａｍ

99 27.5 24.7 11.29 59 2.5

进出口法兰尺寸表Ｉｎｐｕｔ＆ｏｕｔｐｕｔｆｌａｎｇｅｓｉｚｅｔａｂｌｅ安装尺寸表Ｉｎｓｔａｌｌａｔｉｏｎｄｉｍｅｎｓｉｏｎ

进出口法兰尺寸表Ｉｎｐｕｔ＆ｏｕｔｐｕｔｆｌａｎｇｅｓｉｚｅｔａｂｌｅ安装尺寸表Ｉｎｓｔａｌｌａｔｉｏｎｄｉｍｅｎｓｉｏｎ

安装尺寸表Ｉｎｓｔａｌｌａｔｉｏｎｄｉｍｅｎｓｉｏｎ安装尺寸表Ｉｎｓｔａｌｌａｔｉｏｎｄｉｍｅｎｓｉｏｎ

/ * + , - . & ' / * + , - . & '

安装尺寸表Ｉｎｓｔａｌｌａｔｉｏｎｄｉｍｅｎｓｉｏｎ安装尺寸表Ｉｎｓｔａｌｌａｔｉｏｎｄｉｍｅｎｓｉｏｎ

/ * + , - . & ' / * + , - . & '

安装尺寸表Ｉｎｓｔａｌｌａｔｉｏｎｄｉｍｅｎｓｉｏｎ安装尺寸表Ｉｎｓｔａｌｌａｔｉｏｎｄｉｍｅｎｓｉｏｎ

/ * + , - . & ' / * + , - . & '

安装尺寸表Ｉｎｓｔａｌｌａｔｉｏｎｄｉｍｅｎｓｉｏｎ安装尺寸表Ｉｎｓｔａｌｌａｔｉｏｎｄｉｍｅｎｓｉｏｎ

/ * + , - . & ' / * + , - . & '

水泵装配与拆卸Ｗａｔｅｒｐｕｍｐａｓｓｅｍｂｌｙａｎｄｄｉｓａｓｓｅｍｂｌｙ -.01 Installation description

水泵装配与拆卸Ｗａｔｅｒｐｕｍｐａｓｓｅｍｂｌｙａｎｄｄｉｓａｓｓｅｍｂｌｙ -.01 Installation description