REVISION HISTORY

PRODUCT DATA DRAWING

REV DESCRIPTION DATE APPROVED
- NRN 47568 07/23
SEE PDM

NOTE 3 5X
.181 4.60 .085±.003 2.15±0.08
.075 1.91 THIS AREA PRE-TINNED
Sn63Pb37 SOLDER

.185 4.70 .012±.001 0.30±0.03

.165 4.19 .085±.003 2.16±0.08

.110 2.79 .071 1.80 4X .019 0.48

RP

2X
.085±.002 2.16±0.05
4X
MATERIAL:
.026 0.66
BODIES & CONTACT: BERYLLIUM COPPER PER ASTM B196, MIN
ALLOY No. UNS C17300, TD04.
INSULATORS: PTFE PER ASTM D1710, TYPE I, GRADE 1, CLASS B.
FINISH:
BODIES & CONTACT: GOLD PER ASTM B488, TYPE II, CODE C, CLASS 1.27
OVER NICKEL PER AMS-QQ-N-290, CLASS 1, .00005" MIN. 2X .0425±.0010 1.08±0.03 TABLE I
PERFORMANCE: PART NUMBER INTERFACE
.0160±.0015 0.41±0.04
1211-40170 SMOOTH BORE
IMPEDANCE: 50 OHMS
FREQ. RANGE: DC TO 26.5 GHz 1211-40171 LIMITED DETENT
RECOMMENDED MOUNTING HOLE PATTERN
1211-40172 FULL DETENT
NOTES: MATERIAL:
SEE NOTES DIMENSIONS ARE IN INCHES TOLERANCES:
UNLESS OTHERWISE SPECIFIED
FRACTIONAL: 1/64 ANGULAR: X 1 0'
X X' 15' 1) ALL DIMENSIONS ARE IN INCHES [MILLIMETERS]
1. DIMENSIONS APPLY PRIOR TO SOLDER DIPPING. FINISH:
SEE NOTES DECIMAL: .X .030
2) ALL DIMENSIONS ARE AFTER PLATING.
3) BREAK CORNERS & EDGES .005 R. MAX.
www.svmicrowave.com

2. Sn63 SOLDER REQUIRED IN HATCHED AREA.

.XX .010 4) CHAM. 1ST & LAST THREADS.
.XXX .005 5) SURFACE ROUGHNESS 63 e MIL-STD-10. TITLE:
3. SOLDER PERMISSIBLE ON OUTER AND ADJACENT SURFACES OF
SURFACE AREA:
N/A 6) DIA.’S ON COMMON CENTERS TO BE CONCENTRIC
INTERPRET DIMENSIONS AND TOLERANCES WITHIN .005 T.I.R.
7) REMOVE ALL BURRS SMP MALE PCB MT CONNECTOR
BODY IN THIS AREA. PROPRIETARY
PER ASME Y14.5M - 1994
TIN-DIPPED
4. FOR A FOOTPRINT RECOMMENDATION SPECIFIC TO YOUR PCB, THE INFORMATION CONTAINED IN THIS DRAWING THIRD ANGLE PROJECTION DRAWN: KRR 07/13/23
1211-40170-40172
IS THE SOLE PROPERTY OF SV MICROWAVE, INC. SIZE DWG. NO.
PLEASE CONTACT US AT [email protected] ANY REPRODUCTION IN PART OR AS A WHOLE
WITHOUT THE WRITTEN PERMISSION OF
CHECKED: SEE PDM B
SV MICROWAVE, INC IS PROHIBITED. APPROVED: SEE PDM SCALE: 12:1 SHEET 1 OF 1