iSMA-B-FCU
The fully programmable controller iSMA-B-
Key Features
FCU, is built with the aim of controlling the FCU. • Universal default application
The controller is factory-equipped with the two • Support 2-pipe or 4-pipe systems
most popular open communication protocols • Application adjustable by dedicated DIP-
Modbus RTU/ASCII and BACnet MS/TP, which
switch
are selected using DIP switches.
• Programming in real-time
To minimize time and simplify the • Addressing from 0 to 255 by DIP-switch
commissioning process the controller is • Sedona Framework 1.2 support
delivered with a default application, which • iSMA Tool – free of charge programming soft
supports the most popular types of FCU. A • Mini USB to manage application (provides
dedicated DIP switch allows for adjusting the power)
parameters of the application. Additionally, in • Real-time programming
the BACnet protocol, the application has a built- • Onboard 18 Inputs/Outputs
in function that allows automatically to bind
• Fast processor with ARM core
Master and Slave controllers in the groups (20
• Modbus ASCII/RTU or BACnet MS/TP higher-
groups on the bus, up to 6 devices in one group).
If the default application does not meet the level system connection
project requirements, it can be modified or • 2x RJ12 (1x RS485) for wall panels connection
created from scratch by the freeware iSMA Tool. • Built-in 24 V AC for an external equipment
Changing the application is possible in real-time (version 230 V AC).
by USB. There are three hardware versions with • Easy firmware management, backup, and
different types of Triac Outputs and power
restore with FCU Updater
supplies.
iSMA CONTROLLI S.p.A. – Via Carlo Levi 52, 16010 Sant’Olcese (GE) - Italy | [email protected]
www.ismacontrolli.com DBL626en | 1st Issue rev. 7 | 04/2022 page 1
iSMA-B-FCU
Specification
Inputs Communication
• 4x Special Input - voltage, resistance, dry contact • Interface RS485 half-duplex
• 4x Digital Input – dry contact • Up to 128 devices on the bus
• Protocols: Modbus or BACnet
Outputs • Baud rate: 4800 to 115200 bps
• 3x Digital Output 6 A (Fan Speed)
Housing
• 1x Digital Output 10 A (electric heater)
• 1x Digital Output 6 A (cooling actuator) • Dimension: 123,6 x 136,6 x 54,5 mm (4.87 x 5.38 x 2.15
• 2x Triac 0,5 A @ 230 V AC or 0,5 A/0,3 A* @ 24 V AC in), 123,6 x 171,2 x 54,9 mm (4.87 x 6.74 x 2.17 in) with
(heating and cooling, actuators) with PWM mode. plastic cover for terminals
• 3x Analog Outputs 0-10 V DC (heating, cooling • Construction: plastic, self-extinguishing (PC/ABS)
actuators and Fan Speed) • DIN rail mounting DIN (DIN EN 50022 norm)
• Cooling: internal air circulation
Platform
Environment
• ARM Cortex-M4
• Operating temperature: -10°C to 50°C (14°F to 122°F)
Power Supply • Storage temperature: -40°C to 85°C (-40°F to 185°F)
• 230 V AC or 24 V AC • Relative humidity: 5% to 95%, non-condensing
• Ingress Protection Rating: IP40 – for indoor installation
* Imax=0,3A=ITO1+ITO2+I24V out
Power supply Power supply Triac Triac
Ordering
230 V AC 24 V AC 0,5 A 230 V AC 0,5 A/0,3 A 24 V AC*
iSMA-B-FCU-HH ✔ ✔
iSMA-B-FCU-HL ✔ ✔*
iSMA-B-FCU-LL ✔ ✔
iSMA-B-TC-7S Mounting accessory – set of plastic terminal covers
iSMA CONTROLLI S.p.A. – Via Carlo Levi 52, 16010 Sant’Olcese (GE) - Italy | [email protected]
www.ismacontrolli.com DBL626en | 1st Issue rev. 7 | 04/2022 page 2
