Active Suspension
Last Updated: Dec 22, 2022
NXP solutions enable active suspension systems in today's high-end sports cars and sedans.
This offers an adjustable ride, optimized for comfort or handling performance by automatically
adjusting the vehicle's wheel and chassis movements according to road conditions.
NXP low g sensors mounted on dampers measure displacement acceleration, while 16-bit
single-core and MPC5xxx 32-bit single-core and dual-core MCUs with enhanced computing
power and specialized peripherals for control functions enable individual control of the damper
coefficient at each wheel.
Active Suspension Block Diagram
Front Left Front Right
VBAT VBAT
Safety SBC Safety SBC
Actuator Actuator
Driver Driver
MCU MCU
Low-g Low-g
Accelerometer Accelerometer
FlexRay FlexRay Suspension Air Damper
Interface Interface Pressure Sensor
ICM of BCM
VBAT VBAT
Safety SBC Safety SBC
Actuator Actuator
Driver Driver
Vehicle Acceleration MCU MCU
Vehicle Level Low-g
Low-g
Vehicle Speed Accelerometer Accelerometer
Etc.
CAN FlexRay
FlexRay Suspension Air Damper
Suspension Air Damper Interface Pressure Sensor Interface
Pressure Sensor
Rear Left Rear Right
NXP Technology Non NXP Technology Optional Technology
Recommended Products for Active Suspension
• MPXx6400: Absolute, Integrated Pressure Sensor (15 to 400 kPa)
Suspension Air Damper Pressure
Sensor
• FS6500: Grade 1 and Grade 0 Safety Power System Basis Chip with CAN Flexible Data Transceiver
Safety SBC • FS4500: Grade 1 and Grade 0 Safety Power System Basis Chip with CAN Flexible Data Transceiver
• FS26: Safety System Basis Chip with Low Power, for ASIL D Systems
• CAN Transceivers: CAN Transceivers
CAN Transceiver
• GreenBox 3 Real-Time Development Platform
Microcontrollers (MCU) • MPC560xP: Ultra-Reliable MPC560xP MCU for Automotive and Industrial Safety Applications
• MPC564xL: Ultra-Reliable Dual-Core 32-bit MCU for Automotive and Industrial Applications
• S32Z2 Safe and Secure High-Performance Real-Time Processors
• S32E2: S32E2 Safe and Secure High-Performance Real-Time Processors with Actuation Support
Low-g Accelerometer
• FlexRay Transceivers: FlexRay Transceivers
FlexRay™ Interface
• HB2000: SPI Programmable 10 A H-Bridge Brushed DC Motor Driver
Actuator Driver • HB2001: SPI Programmable 10 A H-Bridge Brushed DC Motor Driver
• MC33926: H-Bridge, Brushed DC Motor Driver, 5-28 V, 5 A, 20 kHz
• Gateway: Gateway
ICM OR BCM MCU
View our complete solution for Active Suspension.
Note: The information on this document is subject to change without notice.
www.nxp.com
NXP and the NXP logo are trademarks of NXP B.V. All other product or service names are the property of their respective owners. The related technology may be
protected by any or all of patents, copyrights, designs and trade secrets. All rights reserved. © 2024 NXP B.V.