Micro Adjust Control Heads

Push-Pull Control Head

Micro Adjust control heads are ideal for remote operation of a throttle, regulating valve, or other
applications needing precise adjustment capabilities.
Common Applications: Throttle control, regulating valve
• Depressing the center button allows pushing or pulling the knob to make course travel adjustments
• Flexible dust seal protects internal release mechanism
• Rotating the knob clockwise extends the output in the finite mode, and counter-clockwise retracts
• Four and one-half turns results in 1” of linear travel
• Normal vibration does not affect the micro adjust setting

Optional:
• Friction lock accessory for applications where vibration is excessive
• Disconnect feature and various output end configurations to suit
a particular application

Technical:
• Load: 20 lb. maximum Cablecraft® Ordering Codes 2 - 1 - L - 3 - 2 - DF - (6) - 3 - 120
• Travel: 3” maximum
• Threaded mount
Control Head Type
• Friction lock
2 = Micro Adjust
• Disconnect 5 = Twist Lock with 2.38” Plastic Handle
6 = Twist Lock with 3.5” Metal Handle
7 = Non Lock with 3/8”-24 UNF Mounting
8 = Non Lock with 7/16”-20 UNF Mounting
9 = Non Lock with 5/8”-18 UNF Mounting
Cable Type
1 = Low Friction-EXT 3 = Low Friction 6 = Utility 9 = Bristow
Cable Size
V = Very Light Duty L = Light Duty
Stainless Steel Options
0 = Carbon Steel Fittings
3 = with Stainless Steel End Rod
4 = with Stainless Steel End Rod, Support Tube and Innermember Armor
Output End Fittings
0 = See Illustration 2 = Threaded Swivel 3 = Grooved Swivel
Cable Options
D = Disconnect Feature F = Friction Lock Accessory
Seal Options (Use this number only if requesting optional seals)
5 = Improved Model 5 Wiper Seal is Standard on Low Friction-EXT & Utility
6 = Model 6 Wiper Seal, Optional on All Controls
Cable Travel 1” - 3” (For output fittings style 2 & 3 only)

Overall Length (See overall length dimension points indicated on each illustration)

Knob Option

Connecting a World
in Motion
Micro Adjust

All line art dimensions are represented in inches

Extended Non Lock Non Lock Twist Micro

Dimensions VLD LD Lock Adjust

VLD A “A” 81V32 51V32 21V32DF

.97
MIN
EXTENDED .88 MIN
FULL THD 1” 4.94” 81V42 51V42 21V42DF EXT
2” 6.94” 86V32 56V32 26V32DF
.43 DIA 10-32UNF-2A UTL
.45 DIA 7/16-20UNF-2A 3” 8.94” 86V42 56V42 26V42DF
VLD 1.16
.33
A “A” 81V33 51V33 21V33DF
EXTENDED .88 MIN
FULL THD 1” 4.25” 81V43 51V43 21V43DF EXT
.34 DIA 10-32UNF-2A 2” 6.25” 86V33 56V33 26V33DF
.45 DIA .13 WIDE UTL
.37 DIA
.25 ROOT DIA 3” 8.25” 86V43 56V43 26V43DF
LD A “A” 91L32 51L32 21L32DF
.75 .75 EXTENDED
.91 MIN 1” 5.18” 91L42 51L42 21L42DF EXT
FULL THD
.53 DIA 1/4-28UNF-2A 2” 7.18” 96L32 56L32 26L32DF
UTL
.65 DIA 5/8-18UNF-2A 3” 9.18” 96L42 56L42 26L42DF
LD 1.75
.44
A “A” 91L33 51L33 21L33DF
EXTENDED .93 MIN
1” 4.56” 91L43 51L43 21L43DF UTL
FULL THD
.53 DIA 1/4-28UNF-2A
2” 6.56” 96L33 56L33 26L33DF
.65 DIA
.50 DIA
.17 WIDE UTL
.41 ROOT DIA 3” 8.56” 96L43 56L43 26L43DF
VLD LL 12.00
12.00 LL COMMERCIAL
COMMERCIAL LL
.75
.75 1.41
1.41 12.00
12.00 1.92
1.92 12.00
12.00
79V00 59V00 29V00 BRIS
.12
.12 1.00
1.00
79V04 59V04 29V04
SCREW
SCREWON
ON .38
.38 .13
.13WIDE
LD CONDUIT
CONDUITCAP
CAP WIRE
WIRESTOP

STOP .25
WIDE
.25ROOT
ROOTDIA
DIA
.38
.38DIA
DIA
3/8-24UNF-2
3/8-24UNF-2
COMMERCIAL
COMMERCIAL 79V05 59V05 29V05
29V00
29V00 29V05
29V05 29V04
29V04

Distributed by:

Warning: Since the manufacturer is

2110 Summit Street 2789 Old Belleville Road unable to determine all applications in
New Haven, Indiana USA 46774 St. Matthews, South Carolina USA 29135 which a part may be placed, it is the
Tel 803 655-7300 Fax 803 874-3558 user’s responsibility to determine the
Tel 260 749-5105 Fax 260 749-5677
suitability of the part for its intended
use. This is especially true where
4401 South Orchard Street Diplocks Way-South Road safety is a factor. Incorrect application
Tacoma, Washington USA 98466 Hailsham, E. Sussex BN27 3JF, England or installation may result in property
Tel 253 475-1080 Fax 253 474-1623 Tel (011-44) 1323-841510 Fax (011-44) 1323-845848 damage, bodily injury, or death. For
technical assistance, call 260-749-5105.
www.cablecraft.com
Form CHI-01 (Rev. 3-18) © 2018 Cablecraft Motion Controls Printed in U.S.A.