Scribd
Upload
21 views

Shot Test

This document summarizes the results of a differential shot test conducted on an OMICRON QuickCMC test module. It includes 6 tests with varying current levels: a pick up test at 130mA, a drop off test at 130mA, and slope tests from 305mA to 2.865A. Each test reports the fault calculator parameters, generator settings, and binary input response times.

Uploaded by

Gita
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
21 views

Shot Test

This document summarizes the results of a differential shot test conducted on an OMICRON QuickCMC test module. It includes 6 tests with varying current levels: a pick up test at 130mA, a drop off test at 130mA, and slope tests from 305mA to 2.865A. Each test reports the fault calculator parameters, generator settings, and binary input response times.

Uploaded by

Gita
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 9

DIFF SHOT TEST:

Test Module
Name: OMICRON QuickCMC Version: 4.30
Test Start: 01-Feb-2024 12:39:34 Test End: 01-Feb-2024 12:44:14
User Name: Manager:
Company:

Test Results

Title: Pick up

Fault Calculator:
Table Inputmode Parameters (All values are secondary)
Direct I L1 210,0 mA 0,00 ° 50,000 Hz
I L2 210,0 mA -120,00 ° 50,000 Hz
I L3 210,0 mA 120,00 ° 50,000 Hz

Generator Settings
I L1 0,210A 0,00° +90°
I L2 0,210A -120,00°
I L3 0,210A 120,00° I L3
I Sec L1 0,000A 180,00°
I L1
I Sec L2 0,000A 60,00° 180° 0°
I Sec L3 0,000A 300,00°
I L2

300,0 mA -90°

Binary Inputs
Name Slope Time
Trip 0
Start 0
Overload 0

Title: drop off

Fault Calculator:
Table Inputmode Parameters (All values are secondary)
Direct I L1 130,0 mA 0,00 ° 50,000 Hz
I L2 130,0 mA -120,00 ° 50,000 Hz
I L3 130,0 mA 120,00 ° 50,000 Hz

Generator Settings
I L1 0,130A 0,00° +90°
I L2 0,130A -120,00° I L3
I L3 0,130A 120,00°
I Sec L1 0,000A 180,00°
I L1
I Sec L2 0,000A 60,00° 180° 0°
I Sec L3 0,000A 300,00°

I L2
150,0 mA -90°

Binary Inputs
Name Slope Time
Trip 0
Start 0
Overload 0
Title: slope test 1

Fault Calculator:
Table Inputmode Parameters (All values are secondary)
Direct I L1 305,0 mA 0,00 ° 50,000 Hz
I L2 305,0 mA -120,00 ° 50,000 Hz
I L3 305,0 mA 120,00 ° 50,000 Hz

Generator Settings
I L1 0,305A 0,00° +90°
I L2 0,305A -120,00°
I L3
I L3 0,305A 120,00°
I Sec L1 0,000A 180,00°
I L1
I Sec L2 0,000A 60,00° 180° 0°
I Sec L3 0,000A 300,00°
I L2

400,0 mA -90°

Binary Inputs
Name Slope Time
Trip 0->1 0,024s
Start 1->0 n/a
Overload 1->0 n/a

Title: slope test 2

Fault Calculator:
Table Inputmode Parameters (All values are secondary)
Direct I L1 795,0 mA 0,00 ° 50,000 Hz
I L2 795,0 mA -120,00 ° 50,000 Hz
I L3 795,0 mA 120,00 ° 50,000 Hz

Generator Settings
I L1 0,795A 0,00° +90°
I L2 0,795A -120,00° I L3
I L3 0,795A 120,00°
I Sec L1 0,200A 180,00°
I SecI L1
Sec L2I L1
I Sec L2 0,200A 60,00° 180° I Sec L3 0°
I Sec L3 0,200A 300,00°

I L2
800,0 mA -90°

Binary Inputs
Name Slope Time
Trip 0->1 0,049s
Start 1->0 n/a
Overload 1->0 n/a

Title: slope test 3

Fault Calculator:
Table Inputmode Parameters (All values are secondary)
Direct I L1 1,090 A 0,00 ° 50,000 Hz
I L2 1,090 A -120,00 ° 50,000 Hz
I L3 1,090 A 120,00 ° 50,000 Hz
Generator Settings
I L1 1,090A 0,00° +90°
I L2 1,090A -120,00°
I L3 1,090A 120,00° I L3
I Sec L1 0,300A 180,00°
I Sec L1 I L2
I Sec L1
I Sec L2 0,300A 60,00° 180° I Sec L3 0°
I Sec L3 0,300A 300,00°
I L2

1,5 A -90°

Binary Inputs
Name Slope Time
Trip 0->1 0,094s
Start 1->0 n/a
Overload 1->0 n/a

Title: slope test 4

Fault Calculator:
Table Inputmode Parameters (All values are secondary)
Direct I L1 1,390 A 0,00 ° 50,000 Hz
I L2 1,390 A -120,00 ° 50,000 Hz
I L3 1,390 A 120,00 ° 50,000 Hz

Generator Settings
I L1 1,390A 0,00° +90°
I L2 1,390A -120,00° I L3
I L3 1,390A 120,00°
I Sec L1 0,400A 180,00°
I Sec IL1
Sec L2
I L1
I Sec L2 0,400A 60,00° 180° I Sec L3 0°
I Sec L3 0,400A 300,00°

I L2
1,5 A -90°

Binary Inputs
Name Slope Time
Trip 0->1 0,042s
Start 1->0 n/a
Overload 1->0 n/a

Title: slope test 5

Fault Calculator:
Table Inputmode Parameters (All values are secondary)
Direct I L1 1,965 A 0,00 ° 50,000 Hz
I L2 1,965 A -120,00 ° 50,000 Hz
I L3 1,965 A 120,00 ° 50,000 Hz
Generator Settings
I L1 1,965A 0,00° +90°
I L2 1,965A -120,00° I L3
I L3 1,965A 120,00°
I Sec L1 0,500A 180,00°
I SecI L1
Sec L2I L1
I Sec L2 0,500A 60,00° 180° I Sec L3 0°
I Sec L3 0,500A 300,00°

I L2
2,0 A -90°

Binary Inputs
Name Slope Time
Trip 0->1 0,026s
Start 1->0 n/a
Overload 1->0 n/a

Title: slope test 6

Fault Calculator:
Table Inputmode Parameters (All values are secondary)
Direct I L1 2,865 A 0,00 ° 50,000 Hz
I L2 2,865 A -120,00 ° 50,000 Hz
I L3 2,865 A 120,00 ° 50,000 Hz

Generator Settings
I L1 2,865A 0,00° +90°
I L2 2,865A -120,00° I L3
I L3 2,865A 120,00°
I Sec L1 0,600A 180,00°
I Sec L1 L2I L1
I Sec
I Sec L2 0,600A 60,00° 180° I Sec L3 0°
I Sec L3 0,600A 300,00°

I L2
3,0 A -90°

Binary Inputs
Name Slope Time
Trip 0->1 0,035s
Start 1->0 n/a
Overload 1->0 n/a

Title: slope test 7

Fault Calculator:
Table Inputmode Parameters (All values are secondary)
Direct I L1 3,765 A 0,00 ° 50,000 Hz
I L2 3,765 A -120,00 ° 50,000 Hz
I L3 3,765 A 120,00 ° 50,000 Hz
Generator Settings
I L1 3,765A 0,00° +90°
I L2 3,765A -120,00° I L3
I L3 3,765A 120,00°
I Sec L1 0,700A 180,00°
I Sec L1 I L1
II Sec
I Sec L2 0,700A 60,00° 180° Sec L2
L3 0°
I Sec L3 0,700A 300,00°

I L2
4,0 A -90°

Binary Inputs
Name Slope Time
Trip 0->1 0,025s
Start 1->0 n/a
Overload 1->0 n/a

Title: slope test 8

Fault Calculator:
Table Inputmode Parameters (All values are secondary)
Direct I L1 4,660 A 0,00 ° 50,000 Hz
I L2 4,660 A -120,00 ° 50,000 Hz
I L3 4,660 A 120,00 ° 50,000 Hz

Generator Settings
I L1 4,660A 0,00° +90°
I L2 4,660A -120,00° I L3
I L3 4,660A 120,00°
I Sec L1 0,800A 180,00°
I Sec L1 L2I L1
I Sec L2 0,800A 60,00° 180° II Sec
Sec L3 0°
I Sec L3 0,800A 300,00°

I L2
5,0 A -90°

Binary Inputs
Name Slope Time
Trip 0->1
Start 1->0 n/a
Overload 1->0 n/a

Title: slope test 9

Fault Calculator:
Table Inputmode Parameters (All values are secondary)
Direct I L1 5,560 A 0,00 ° 50,000 Hz
I L2 5,560 A -120,00 ° 50,000 Hz
I L3 5,560 A 120,00 ° 50,000 Hz
Generator Settings
I L1 5,560A 0,00° +90°
I L2 5,560A -120,00° I L3
I L3 5,560A 120,00°
I Sec L1 0,900A 180,00°
I Sec L1 L2I L1
I Sec
I Sec L2 0,900A 60,00° 180° L3 0°
I Sec L3 0,900A 300,00°

I L2
6,0 A -90°

Binary Inputs
Name Slope Time
Trip 0->1 0,033s
Start 1->0 n/a
Overload 1->0 n/a

Title: slope test 10

Fault Calculator:
Table Inputmode Parameters (All values are secondary)
Direct I L1 6,455 A 0,00 ° 50,000 Hz
I L2 6,455 A -120,00 ° 50,000 Hz
I L3 6,455 A 120,00 ° 50,000 Hz

Generator Settings
I L1 6,455A 0,00° +90°
I L2 6,455A -120,00°
I L3
I L3 6,455A 120,00°
I Sec L1 1,000A 180,00°
I Sec L1 I L1
I Sec L2 1,000A 60,00° L3
I Sec L2
180° 0°
I Sec L3 1,000A 300,00°
I L2

8,0 A -90°

Binary Inputs
Name Slope Time
Trip 0->1 0,220s
Start 1->0 n/a
Overload 1->0 n/a

Title: DIFF SHOT R

Fault Calculator:
Table Inputmode Parameters (All values are secondary)
Direct I L1 305,0 mA 0,00 ° 50,000 Hz
I L2 0,00 A -120,00 ° 50,000 Hz
I L3 0,00 A 120,00 ° 50,000 Hz
Generator Settings
I L1 0,305A 0,00° +90°
I L2 0,000A -120,00°
I L3 0,000A 120,00°
I Sec L1 0,000A 180,00°
I L1
I Sec L2 0,000A 60,00° 180° 0°
I Sec L3 0,000A 300,00°

400,0 mA -90°

Binary Inputs
Name Slope Time
Trip 0->1 0,021s
Start 1->0 n/a
Overload 1->0 n/a

Title: DIFF SHOT S

Fault Calculator:
Table Inputmode Parameters (All values are secondary)
Direct I L1 0,00 A 0,00 ° 50,000 Hz
I L2 305,0 mA -120,00 ° 50,000 Hz
I L3 0,00 A 120,00 ° 50,000 Hz

Generator Settings
I L1 0,000A 0,00° +90°
I L2 0,305A -120,00°
I L3 0,000A 120,00°
I Sec L1 0,000A 180,00°
I Sec L2 0,000A 60,00° 180° 0°
I Sec L3 0,000A 300,00°
I L2

400,0 mA -90°

Binary Inputs
Name Slope Time
Trip 0->1 0,041s
Start 1->0 n/a
Overload 1->0 n/a

Title: DIFF SHOT T

Fault Calculator:
Table Inputmode Parameters (All values are secondary)
Direct I L1 0,00 A 0,00 ° 50,000 Hz
I L2 0,00 A -120,00 ° 50,000 Hz
I L3 305,0 mA 120,00 ° 50,000 Hz
Generator Settings
I L1 0,000A 0,00° +90°
I L2 0,000A -120,00°
I L3
I L3 0,305A 120,00°
I Sec L1 0,000A 180,00°
I Sec L2 0,000A 60,00° 180° 0°
I Sec L3 0,000A 300,00°

400,0 mA -90°

Binary Inputs
Name Slope Time
Trip 0->1 0,043s
Start 1->0 n/a
Overload 1->0 n/a

Title: DIFF SHOT R-S

Fault Calculator:
Table Inputmode Parameters (All values are secondary)
Direct I L1 305,0 mA 0,00 ° 50,000 Hz
I L2 305,0 mA -120,00 ° 50,000 Hz
I L3 0,00 A 120,00 ° 50,000 Hz

Generator Settings
I L1 0,305A 0,00° +90°
I L2 0,305A -120,00°
I L3 0,000A 120,00°
I Sec L1 0,000A 180,00°
I L1
I Sec L2 0,000A 60,00° 180° 0°
I Sec L3 0,000A 300,00°
I L2

400,0 mA -90°

Binary Inputs
Name Slope Time
Trip 0->1 0,029s
Start 1->0 n/a
Overload 1->0 n/a

Title: DIFF SHOT R-T

Fault Calculator:
Table Inputmode Parameters (All values are secondary)
Direct I L1 305,0 mA 0,00 ° 50,000 Hz
I L2 0,00 A -120,00 ° 50,000 Hz
I L3 305,0 mA 120,00 ° 50,000 Hz
Generator Settings
I L1 0,305A 0,00° +90°
I L2 0,000A -120,00°
I L3
I L3 0,305A 120,00°
I Sec L1 0,000A 180,00°
I L1
I Sec L2 0,000A 60,00° 180° 0°
I Sec L3 0,000A 300,00°

400,0 mA -90°

Binary Inputs
Name Slope Time
Trip 0->1 0,042s
Start 1->0 n/a
Overload 1->0 n/a

Title: DIFF SHOT R-S

Fault Calculator:
Table Inputmode Parameters (All values are secondary)
Direct I L1 305,0 mA 0,00 ° 50,000 Hz
I L2 305,0 mA -120,00 ° 50,000 Hz
I L3 0,00 A 120,00 ° 50,000 Hz

Generator Settings
I L1 0,305A 0,00° +90°
I L2 0,305A -120,00°
I L3 0,000A 120,00°
I Sec L1 0,000A 180,00°
I L1
I Sec L2 0,000A 60,00° 180° 0°
I Sec L3 0,000A 300,00°
I L2

400,0 mA -90°

Binary Inputs
Name Slope Time
Trip 0->1 0,040s
Start 1->0 n/a
Overload 1->0 n/a

Summary
18 tests passed, 0 tests failed, 0 tests not assessed 100,00% passed
Test passed

You might also like