01
Substation Automation
Gateway software for PACiS solution
Communication front-end for electrical substations
The Gateway software is a new generation of
application dedicated to the substation front-
end communication of the PACiS system.
This software is capable of operating on any
industrial PC. In such applications, it allows the
interconnection of bay IEDs to remote monitoring
and control systems.
The Gateway software includes a powerful
protocol convertor capability which makes it a
perfect match for versatile solutions.
The Gateway software is a FULL COMPLIANCE WITH IEC 61850 STANDARD
IEC61850 based solution to The Gateway software is a certified IEC61850 solution to
respond to electrical utilities interface compliant IEDs.
and industrial substations
The Gateway software for PACiS solutions is delivered
communication demands.
with an IEC 61850 engineering toolsuite, ensuring simple
configuration, commissioning and maintenance of your
IEC 61850 system.
CUSTOMER BENEFITS SCALABLE AND INTEROPERABLE
The Gateway software allows users to configure a large
IEC 61850 compliant range of communication channels to enable scalable
Participate to deploy cyber secure connectivity of the various networks of the plant.
systems
In data concentrator applications, the Gateway software
Scalable and interoperable permits the management of TCP/IP or serial slave
High level of availability devices connected in a downstream communication link.
Smarter networks powered by The interoperability operated by various protocols
IEC 61131-3 automation engine contributes to facilitate solution deployment, upgrade or
extension.
02
Substation Automation Communication front-end for electrical substations
High level of availability
TECHNICAL DATA
The Gateway software redundancy option
provides the ideal option to significantly
increase the full system availability. Supported protocols
A consolidation mechanism, so called
Master/Client protocols: IEC 61850 Client, IEC 60870-5-101,
network split, allows the continuity of data
Modbus RTU and TCP/ IP, DNP3 over IP
polling in cases of communication link failure
Slave/Server protocols: IEC 61850 Server,
along the IED daisy chain between the two
IEC 60870-5-104 / -101, Modbus RTU and TCP/ IP,
redundant gateways.
DNP3 serial and over IP, OPC DA2.
Communication capability
Smarter networks powered by
IEC 61131-3 automation engine 1 x IEC61850 station bus
Up to 6 simultaneous active remote control-centre links
The Gateway software is designed to
Up to 16 simultaneous active fieldbus links
process real-time automation tasks based
Up to 200 fieldbus IED’s
on IEC 61131-3 standard language. This
allows execution of distributed automation Cyber Security
over collaborative networks, a significant Role-Based Access Control (RBAC)
step towards smarter grids.
Security logs management
Whitelisting to prevent from malware
Hardening for OS and unused resources
Gateway software application
Other software features
Secure Access HMI (optional)
G980-HELPS : embedded fieldbus IED simulator
Gateway device redundancy
Network split management for master Modbus RTU
Automation based on IEC 61131-3
Associated hardware (validated)
Industrial fanless PC:
Magelis PCBOX
MiCOM A300
MiCOM G930/G950 (IEC 61850-3 certified)
Gateway Software
instances
Industrial workstation PC:
IPC-A500 range
© 2014 Schneider Electric Industries SAS - All rights reserved
Schneider Electric Industries SAS
35, rue Joseph Monier As standards, specifications and designs change from time
CS 30323 to time, please ask for confirmation of the information given
F - 92506 Rueil Malmaison Cedex (France) in this publication.
Tel.: +33 (0) 1 41 29 70 00
RCS Nanterre 954 503 439 Design: Schneider Electric Industries SAS
Capital social 896 313 776 € Photos: iStockPhoto This document has been
www.schneider-electric.com Printed: printed on recycled paper.
NRJED112382EN 06-2014
