Welcome to download the Newest 2passeasy 300-710 dumps
https://www.2passeasy.com/dumps/300-710/ (0 New Questions)
Exam Questions 300-710
Securing Networks with Cisco Firepower (SNCF)
https://www.2passeasy.com/dumps/300-710/
Passing Certification Exams Made Easy visit - https://www.2PassEasy.com
Welcome to download the Newest 2passeasy 300-710 dumps
https://www.2passeasy.com/dumps/300-710/ (0 New Questions)
NEW QUESTION 1
What is a result of enabling Cisco FTD clustering?
A. For the dynamic routing feature, if the master unit fails, the newly elected master unit maintains all existing connections.
B. Integrated Routing and Bridging is supported on the master unit.
C. Site-to-site VPN functionality is limited to the master unit, and all VPN connections are dropped if the master unit fails.
D. All Firepower appliances can support Cisco FTD clustering.
Answer: C
NEW QUESTION 2
Which two conditions are necessary for high availability to function between two Cisco FTD devices? (Choose two.)
A. The units must be the same version
B. Both devices can be part of a different group that must be in the same domain when configured within the FMC.
C. The units must be different models if they are part of the same series.
D. The units must be configured only for firewall routed mode.
E. The units must be the same model.
Answer: AE
NEW QUESTION 3
On the advanced tab under inline set properties, which allows interfaces to emulate a passive interface?
A. transparent inline mode
B. TAP mode
C. strict TCP enforcement
D. propagate link state
Answer: D
NEW QUESTION 4
Which protocol establishes network redundancy in a switched Firepower device deployment?
A. STP
B. HSRP
C. GLBP
D. VRRP
Answer: A
NEW QUESTION 5
What are two application layer preprocessors? (Choose two.)
A. CIFS
B. IMAP
C. SSL
D. DNP3
E. ICMP
Answer: BC
NEW QUESTION 6
When creating a report template, how can the results be limited to show only the activity of a specific subnet?
A. Create a custom search in Firepower Management Center and select it in each section of the report.
B. Add an Input Parameter in the Advanced Settings of the report, and set the type to Network/IP.
C. Add a Table View section to the report with the Search field defined as the network in CIDR format.
D. Select IP Address as the X-Axis in each section of the report.
Answer: B
NEW QUESTION 7
Which two statements about bridge-group interfaces in Cisco FTD are true? (Choose two.)
A. The BVI IP address must be in a separate subnet from the connected network.
B. Bridge groups are supported in both transparent and routed firewall modes.
C. Bridge groups are supported only in transparent firewall mode.
D. Bidirectional Forwarding Detection echo packets are allowed through the FTD when using bridge-group members.
E. Each directly connected network must be on the same subnet.
Answer: CD
Passing Certification Exams Made Easy visit - https://www.2PassEasy.com
Welcome to download the Newest 2passeasy 300-710 dumps
https://www.2passeasy.com/dumps/300-710/ (0 New Questions)
NEW QUESTION 8
Which command is run on an FTD unit to associate the unit to an FMC manager that is at IP address 10.0.0.10, and that has the registration key Cisco123?
A. configure manager local 10.0.0.10 Cisco123
B. configure manager add Cisco123 10.0.0.10
C. configure manager local Cisco123 10.0.0.10
D. configure manager add 10.0.0.10 Cisco123
Answer: D
NEW QUESTION 9
Which two actions can be used in an access control policy rule? (Choose two.)
A. Block with Reset
B. Monitor
C. Analyze
D. Discover
E. Block ALL
Answer: AB
NEW QUESTION 10
Which two routing options are valid with Cisco Firepower Threat Defense? (Choose two.)
A. BGPv6
B. ECMP with up to three equal cost paths across multiple interfaces
C. ECMP with up to three equal cost paths across a single interface
D. BGPv4 in transparent firewall mode
E. BGPv4 with nonstop forwarding
Answer: AC
NEW QUESTION 10
Which object type supports object overrides?
A. time range
B. security group tag
C. network object
D. DNS server group
Answer: C
NEW QUESTION 12
Which Cisco Firepower rule action displays an HTTP warning page?
A. Monitor
B. Block
C. Interactive Block
D. Allow with Warning
Answer: C
NEW QUESTION 14
In which two ways do access control policies operate on a Cisco Firepower system? (Choose two.)
A. Traffic inspection can be interrupted temporarily when configuration changes are deployed.
B. The system performs intrusion inspection followed by file inspection.
C. They can block traffic based on Security Intelligence data.
D. File policies use an associated variable set to perform intrusion prevention.
E. The system performs a preliminary inspection on trusted traffic to validate that it matches the trusted parameters.
Answer: AC
NEW QUESTION 18
Which two types of objects are reusable and supported by Cisco FMC? (Choose two.)
A. dynamic key mapping objects that help link HTTP and HTTPS GET requests to Layer 7 application protocols.
B. reputation-based objects that represent Security Intelligence feeds and lists, application filters based on category and reputation, and file lists
C. network-based objects that represent IP address and networks, port/protocols pairs, VLAN tags, security zones, and origin/destination country
D. network-based objects that represent FQDN mappings and networks, port/protocol pairs, VXLAN tags, security zones and origin/destination country
E. reputation-based objects, such as URL categories
Answer: BC
NEW QUESTION 19
Passing Certification Exams Made Easy visit - https://www.2PassEasy.com
Welcome to download the Newest 2passeasy 300-710 dumps
https://www.2passeasy.com/dumps/300-710/ (0 New Questions)
What is the benefit of selecting the trace option for packet capture?
A. The option indicates whether the packet was dropped or successful.
B. The option indicated whether the destination host responds through a different path.
C. The option limits the number of packets that are captured.
D. The option captures details of each packet.
Answer: C
NEW QUESTION 24
Which command should be used on the Cisco FTD CLI to capture all the packets that hit an interface?
A. configure coredump packet-engine enable
B. capture-traffic
C. capture
D. capture WORD
Answer: B
NEW QUESTION 29
Which action should be taken after editing an object that is used inside an access control policy?
A. Delete the existing object in use.
B. Refresh the Cisco FMC GUI for the access control policy.
C. Redeploy the updated configuration.
D. Create another rule using a different object name.
Answer: C
NEW QUESTION 34
Which Cisco Firepower feature is used to reduce the number of events received in a period of time?
A. rate-limiting
B. suspending
C. correlation
D. thresholding
Answer: D
NEW QUESTION 39
Which report template field format is available in Cisco FMC?
A. box lever chart
B. arrow chart
C. bar chart
D. benchmark chart
Answer: C
NEW QUESTION 40
Which command must be run to generate troubleshooting files on an FTD?
A. system support view-files
B. sudo sf_troubleshoot.pl
C. system generate-troubleshoot all
D. show tech-support
Answer: B
NEW QUESTION 44
When do you need the file-size command option during troubleshooting with packet capture?
A. when capture packets are less than 16 MB
B. when capture packets are restricted from the secondary memory
C. when capture packets exceed 10 GB
D. when capture packets exceed 32 MB
Answer: D
NEW QUESTION 46
Within Cisco Firepower Management Center, where does a user add or modify widgets?
A. dashboard
B. reporting
C. context explorer
Passing Certification Exams Made Easy visit - https://www.2PassEasy.com
Welcome to download the Newest 2passeasy 300-710 dumps
https://www.2passeasy.com/dumps/300-710/ (0 New Questions)
D. summary tool
Answer: A
NEW QUESTION 49
A network engineer is configuring URL Filtering on Firepower Threat Defense. Which two port requirements on the Firepower Management Center must be
validated to allow communication with the cloud service? (Choose two.)
A. outbound port TCP/443
B. inbound port TCP/80
C. outbound port TCP/8080
D. inbound port TCP/443
E. outbound port TCP/80
Answer: AE
NEW QUESTION 53
Which limitation applies to Cisco Firepower Management Center dashboards in a multidomain environment?
A. Child domains can view but not edit dashboards that originate from an ancestor domain.
B. Child domains have access to only a limited set of widgets from ancestor domains.
C. Only the administrator of the top ancestor domain can view dashboards.
D. Child domains cannot view dashboards that originate from an ancestor domain.
Answer: D
NEW QUESTION 57
Which two statements about deleting and re-adding a device to Cisco FMC are true? (Choose two.)
A. An option to re-apply NAT and VPN policies during registration is available, so users do not need to re-apply the policies after registration is completed.
B. Before re-adding the device in Cisco FMC, you must add the manager back in the device.
C. No option to delete and re-add a device is available in the Cisco FMC web interface.
D. The Cisco FMC web interface prompts users to re-apply access control policies.
E. No option to re-apply NAT and VPN policies during registration is available, so users need to re-apply the policies after registration is completed.
Answer: DE
NEW QUESTION 60
What is a behavior of a Cisco FMC database purge?
A. User login and history data are removed from the database if the User Activity check box is selected.
B. Data can be recovered from the device.
C. The appropriate process is restarted.
D. The specified data is removed from Cisco FMC and kept for two weeks.
Answer: C
NEW QUESTION 61
Which two remediation options are available when Cisco FMC is integrated with Cisco ISE? (Choose two.)
A. dynamic null route configured
B. DHCP pool disablement
C. quarantine
D. port shutdown
E. host shutdown
Answer: CD
NEW QUESTION 66
Which connector is used to integrate Cisco ISE with Cisco FMC for Rapid Threat Containment?
A. pxGrid
B. FTD RTC
C. FMC RTC
D. ISEGrid
Answer: A
NEW QUESTION 71
What is the maximum SHA level of filtering that Threat Intelligence Director supports?
A. SHA-1024
B. SHA-4096
C. SHA-512
D. SHA-256
Passing Certification Exams Made Easy visit - https://www.2PassEasy.com
Welcome to download the Newest 2passeasy 300-710 dumps
https://www.2passeasy.com/dumps/300-710/ (0 New Questions)
Answer: D
NEW QUESTION 73
......
Passing Certification Exams Made Easy visit - https://www.2PassEasy.com
Welcome to download the Newest 2passeasy 300-710 dumps
https://www.2passeasy.com/dumps/300-710/ (0 New Questions)
THANKS FOR TRYING THE DEMO OF OUR PRODUCT
Visit Our Site to Purchase the Full Set of Actual 300-710 Exam Questions With Answers.
We Also Provide Practice Exam Software That Simulates Real Exam Environment And Has Many Self-Assessment Features. Order the
300-710 Product From:
https://www.2passeasy.com/dumps/300-710/
Money Back Guarantee
300-710 Practice Exam Features:
* 300-710 Questions and Answers Updated Frequently
* 300-710 Practice Questions Verified by Expert Senior Certified Staff
* 300-710 Most Realistic Questions that Guarantee you a Pass on Your FirstTry
* 300-710 Practice Test Questions in Multiple Choice Formats and Updatesfor 1 Year
Passing Certification Exams Made Easy visit - https://www.2PassEasy.com
Powered by TCPDF (www.tcpdf.org)
