Protection Testing Library
What´s New in Version 4.50
Compared to Version 4.40
© OMICRON Page 1 of 8
1 Installer Packages Updated
The updated installer packages create folders for all supported relay types of a PTL item. These folders
either contain the documents of the PTL item itself or a reference to the corresponding item. To get this new
feature, please reinstall the required items.
All supported relay types of installed PTL items are then visible in the Protection Testing Library on
the Test Universe start page.
Please consider when using the complete PTL installer package (Companion software, Complete PTL
Package ENU, PTL Installer update check):
If a specific relay type is not available, please check compatible PTL items on the PTL website.
2 New Protection Test Templates
2.1 ABB RED670 V2.2.5 ZMF Line
This item contains a Protection Test Template for Test Universe and Protection Test Templates for
RelaySimTest for single-end and end-to-end tests.
This item replaces the former ABB RED670 V2.2.5 Line without changes.
Features:
> Line Differential Overcurrent
> Distance Protection ZMF, ZMFC
> Backup Overcurrent
> Switch On-to-Fault
2.1.1 XRIO Converter Parameter Import
Relay settings can be exported from the ABB PCM600 software and imported into the XRIO Converter
using the Filter for ABB PCM600 .xrio Settings.
2.2 ABB RED670 V2.2.5 ZMQ Line
This item contains a Protection Test Template for Test Universe and Protection Test Templates for
RelaySimTest for single-end and end-to-end tests.
Features:
> Line Differential Overcurrent
> Distance Protection ZMQ
> Backup Overcurrent
> Switch On-to-Fault
2.2.1 XRIO Converter Parameter Import
Relay settings can be exported from the ABB PCM600 software and imported into the XRIO Converter
using the Filter for ABB PCM600 .xrio Settings.
© OMICRON 2023 Page 2 of 8
2.3 ABB REL670 V2.2.5 ZMC Line
This item contains a Protection Test Template for Test Universe and Protection Test Templates for
RelaySimTest for single-end and end-to-end tests.
Features:
> Line Differential Overcurrent
> Distance Protection ZMC
> Phase Overcurrent
> Residual Overcurrent
> Switch On-to-Fault
2.3.1 XRIO Converter Parameter Import
Relay settings can be exported from the ABB PCM600 software and imported into the XRIO Converter
using the Filter for ABB PCM600 .xrio Settings.
2.4 GE MiCOM Agile P143 V91 Feeder
This item contains a Protection Test Template for Test Universe.
Features:
> Directional Phase Overcurrent
> Directional Earth Fault Overcurrent
> Negative Phase Sequence Overcurrent
2.4.1 XRIO Converter Parameter Import
Relay settings can be exported from the GE MiCOM S1 Agile software and imported into the
XRIO Converter using the Standard Filter for XRIO Files.
2.5 GE MiCOM Agile P14D V70 Feeder
This item contains a Protection Test Template for Test Universe.
Features:
> Directional Phase Overcurrent
> Directional Earth Fault Overcurrent
> Negative Phase Sequence Overcurrent
2.5.1 XRIO Converter Parameter Import
Relay settings can be exported from the GE MiCOM S1 Agile software and imported into the
XRIO Converter using the Standard Filter for XRIO Files.
2.6 Schneider P3L30 V30.205 Line
This item contains a Protection Test Template for Test Universe.
Features:
> Line Differential Overcurrent
> Distance Protection
> Directional and non-directional phase overcurrent
> Directional and non-directional ground fault overcurrent
> Switch on-to-fault
© OMICRON 2023 Page 3 of 8
2.7 Schneider P3M30 V30.205 Motor
This item contains a Protection Test Template for Test Universe.
Features:
> Motor start-up supervision
> Locked rotor
> Thermal overload
> Negative sequence overcurrent
> Undercurrent protection
> Directional and non-directional phase overcurrent
> Directional and non-directional ground fault overcurrent
> Voltage protection
> Negative Sequence voltage imbalance
> Switch on-to-fault
2.8 Schneider MiCOM P243 D2 Motor
This item contains a Protection Test Template for Test Universe.
Features:
> Stall Detection
> Thermal Overload
> Motor Differential
> Short Circuit
> Negative Phase Sequence Overcurrent
> Undervoltage
> Overvoltage
> Residual Overvoltage
> Underfrequency
> Reverse Power
> Out of Step
> Loss of Load
> Sensitive Earth Fault
> Derived Earth Fault
2.8.1 XRIO Converter Parameter Import
Relay settings can be exported from the Schneider Electric Easergy Studio software and imported into the
XRIO Converter using the Standard Filter for XRIO Files.
2.9 Schneider MiCOM P430C 606 Line
Found on the attic. This item contains a Protection Test Template for Test Universe.
Features:
> Distance protection
> Backup overcurrent protection
> Switch onto Fault
2.9.1 XRIO Converter Parameter Import
Relay settings can be exported from the Schneider Electric Easergy Studio software and imported into the
XRIO Converter using the Standard Filter for XRIO Files.
© OMICRON 2023 Page 4 of 8
3 Updated Protection Test Templates
3.1 GE Multilin C70 V8.4x Capacitor Bank
Changes:
> Phase current unbalance 60P added
> Bugfixing – Bank voltage differential 87V pickup test instructions
3.2 Siemens 7SA86 V9.50 Line
Changes:
> Updated to match firmware V9.50
> Minor bugfixing
3.3 Siemens 7SA87 V9.50 Line
Changes:
> Updated to match firmware V9.50
> Minor bugfixing
3.4 Siemens 7SD86 V9.50 Line
Changes:
> Updated to match firmware V9.50
> Minor bugfixing
3.5 Siemens 7SD87 V9.50 Line
Changes:
> Updated to match firmware V9.50
> Minor bugfixing
3.6 Siemens 7SJ86 V9.50 Feeder
Changes:
> Updated to match firmware V9.50
> Minor bugfixing
3.7 Siemens 7SK85 V9.50 Motor
Changes:
> Updated to match firmware V9.50
> Bugfixing – special case for differential protection starting characteristic
> Minor bugfixing
3.8 Siemens 7SL86 V9.50 Line
Changes:
> Updated to match firmware V9.50
> Minor bugfixing
© OMICRON 2023 Page 5 of 8
3.9 Siemens 7SL87 V9.50 Line
Changes:
> Updated to match firmware V9.50
> Minor bugfixing
3.10 Siemens 7UM85 V9.50 Generator
Changes:
> Updated to match firmware V9.50
> Bugfixing – special case for differential protection starting characteristic
> Bugfixing – Advanced Power
> Minor bugfixing
3.11 Siemens 7UT86 V9.50 Transformer
Changes:
> Updated to match firmware V9.50
> Minor bugfixing
© OMICRON 2023 Page 6 of 8
4 Withdrawn Protection Test Templates
4.1 ABB REL670 V2.2.5 Line
This item was replaced by the ABB RED670 V2.2.5 ZMF Line, see section 2.1.
5 New Relay Types for Available Test Templates
5.1 GE Multilin L30 V8.4x Line
The PTL-item GE Multilin L90 V8.4x Line can be used to test this relay.
© OMICRON 2023 Page 7 of 8
For more information, additional literature,
and detailed contact information of our
worldwide offices please visit our website.
www.omicronenergy.com Subject to change without notice.
