190.

180.
170.
160.
150.
140.
130.
120.
110.
100.
90.
80.
70.
60.
50.
40.
30.
20.
10.
0.
1993 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022
BS & DIN Valves
 BS & DIN Valves

Grooved Resilient Grooved Resilient BS 5163 Flanged Resilient DIN F4 Flanged Resilient BS 5163 Flanged Resilient Grooved Resilient Double Door Grooved Flanged Resilient Swing Double Door Wafer Backwater Grooved Y-Type
OS&Y Gate Valve OS&Y Gate Valve OS&Y Gate Valve OS&Y Gate Valve OS&Y Gate Valve Swing Check Valve Check Valve Check Valve Check Valve Valve Strainer

Grooved Y-Type Flanged Y-Type High temperature Flangde Flanged Y-Type Grooved Wet Alarm Flanged Wet Alarm
Flanged x Grooved Resilient Supervisory Switch for Grooved Resilient Grooved Resilient BS Flanged Resilient
Strainer Strainer Y-Type Strainer Strainer Check Valve Valve
OS&Y Gate Valve OS&Y Gate Valve NRS Gate Valve NRS Gate Valve NRS Gate Valve

Deluge Alarm Water Flow Indicator

DIN F4 Flanged Resilient BS Flanged Resilient NRS DIN F4 Flanged Resilient NRS BS 5163 Flanged Resilient Flanged x Grooved Resilient
Valve with Retard
NRS Gate Valve Gate Valve with Post Flange Gate Valve with Post Flange NRS Gate Valve NRS Gate Valve

Water Flow Indicator Pressure Switch Indoor Fire Hydrant Underground Fire Dry Riser Landing Dry Riser Landing
Vertical Indicator Post Wall Indicator Post Supervisory Switch Grooved Butterfly Valve Grooved Butterfly Valve with
Hydrant Valve Valve
for Indicator Post with Tamper Switch Normally Closed Tamper Switch

Grooved Butterfly Valve Grooved Butterfly Valve Double Eccentric Grooved Butterfly Grooved Butterfly Valve Grooved Butterfly Valve Dry Riser Landing Electric Inspector's Manual Inspector's Flexible Rubber Joint Flexible Rubber Joint
with Tamper Switch with Tamper Switch Valve with Tamper Switch Valve Test Connection Test Connection Single Sphere Twin Sphere

Wafer Butterfly Valve Wafer Butterfly Valve with Lugged Wafer Butterfly Lugged Wafer Butterfly Valve with Threaded Butterfly Valve Flexible Rubber Joint Shotgun Riser Check Valve
with Tamper Switch Normally Closed Tamper Switch Valve with Tamper Switch Normally Closed Tamper Switch with Tamper Switch Twin Sphere
 BS & DIN Valves

Double Eccentric Grooved Grooved Butterfly Valve

Butterfly Valve with Tamper Switch (D81X4, D381X4),
(XD382X), PN10/16 PN10/16

MATERIAL SPECIFICATION MATERIAL SPECIFICATION

Part No. Part Standard Specification Options Part No. Part Standard Specification Options

1 Upper Stem Stainless Steel SS304, SS316, SS420, SS431 1 Valve Body EN-GJS-450-10

2 O-Ring NBR EPDM 2 Disc EN-GJS-450-10+EPDM EN-GJS-450-10+NBR

3 Right Body EN-GJS-450-10 3 O-Ring NBR EPDM
4 Disc SS316 4 Stem Stainless Steel SS304, SS316, SS420, SS431
XD382X D81X4
5 Left Body EN-GJS-450-10 5 O-Ring NBR EPDM
6 O-Ring NBR EPDM 6 Stem Stainless Steel SS304, SS316, SS420, SS431
7 Sealing Ring EPDM NBR 7 Lever EN-GJS-450-10 Aluminum
Design Standard: BS EN 593 8 Lower Stem Stainless Steel SS304, SS316, SS420, SS431 Design Standard: BS EN 593 8 Signal Gearbox EN-GJS-450-10
Connection Ends: Groove to ISO 6182 9 Shaft Sleeve SS304+PTFE Connection Ends: Groove to ISO 6182 Note: For special material request other than standard specification, please indicate clearly on the inquiry or order list.
10 O-Ring NBR EPDM
Top Flange Standard: ISO 5211 Top Flange Standard: ISO 5211
11 Stuffing Box ZcuSn5pb5zn5
Stem drive by keys, parallel or diagonal square or flat head Stem drive by keys, parallel or diagonal square or flat head
12 O-Ring NBR EPDM
Working Pressure: PN10/16 Working Pressure: PN10/16
13 Signal Gearbox EN-GJS-450-10
Temperature Range: 0 - 80 Temperature Range: 0 - 80
Note: For special material request other than standard specification, please indicate clearly on the inquiry or order list.
Coating: Fusion Bonded Epoxy Coating in accordance with Coating: Fusion Bonded Epoxy Coating in accordance with
ANSI/AWWA C550 or painting upon request ANSI/AWWA C550 or painting upon request

D381X4

DN Dimensions(mm)
Inch mm A B C F G L1 L2 L K H H1 H2 J M 2 ISO 5211 E N- 1
2" 50 89 65 81 60.3 57.15 15.88 7.93 32 90 206 158 52 114 150 14 F07 70 4- 10
2.5" 65 102 71 97 73.0 69.09 15.88 7.93 32 90 206 158 52 114 150 14 F07 70 4- 10
2.5" 65 102 71 97 76.1 72.26 15.88 7.93 32 90 206 158 52 114 150 14 F07 70 4- 10
3" 80 109 81 97 88.9 84.94 15.88 7.93 32 90 206 158 52 114 150 14 F07 70 4- 10
DN Dimensions(mm) 4" 100 128 95 116 114.3 110.08 15.88 9.53 32 90 206 158 52 114 150 16 F07 70 4- 10
Inch mm A B C ØD1 ØD2 E F G ØM H H1 H2 L
5" 125 141 111 148 139.7 135.48 15.88 9.53 32 90 206 158 52 114 150 16 F07 70 4- 10
2" 50 81 15.88 7.93 60.3 57.15 36.5 46 96.8 125 202.2 127 122.5 75
5" 125 141 111 148 141.3 137.03 15.88 9.53 32 90 206 158 52 114 150 16 F07 70 4- 10
2.5" 65 96.8 15.88 7.93 73.0 69.09 45 53.3 108 125 202.2 127 122.5 75
6" 150 153 133 148 159.0 154.50 15.88 9.53 32 90 206 158 52 114 150 20 F07 70 4- 10
2.5" 65 96.8 15.88 7.93 76.1 69.09 45 53.3 108 125 202.2 127 122.5 75
6" 150 153 133 148 165.1 160.9 15.88 9.53 32 90 206 158 52 114 150 20 F07 70 4- 10
3" 80 115.8 15.88 7.93 88.9 84.94 45 59.7 114.3 125 202.2 127 122.5 75
6" 150 153 133 148 168.3 163.96 15.88 9.53 32 90 206 158 52 114 150 20 F07 70 4- 10
4" 100 147.6 15.88 9.53 114.3 110.08 55.4 73.2 133.4 125 202.2 127 122.5 75
8" 200 184 164 133 219.1 214.4 19.05 11.10 45 125 310 239 69 167 300 26 F10 102 4- 12
5" 125 147.6 15.88 9.53 139.7 135.48 65.5 84.8 158.8 125 202.2 127 122.5 75
10" 250 216 196 159 273.0 268.28 19.05 12.70 45 125 310 239 69 167 300 26 F10 102 4- 12
5" 125 147.6 15.88 9.53 141.3 137.03 65.5 84.8 158.8 125 202.2 127 122.5 75 12" 300 254 226 165 323.9 318.29 19.05 12.70 45 125 307 229 73 190 300 28 F10 102 4- 12
6" 150 147.6 15.88 9.53 165.1 160.9 65.5 97.3 171.5 225 215 139.5 122.5 75
Note: Valve must not be installed with disc in full open position. Disc must be partly closed so that no part is protruding beyond end of valve body.
6" 150 147.6 15.88 9.53 168.3 163.96 65.5 97.3 171.5 225 215 139.5 122.5 75
8" 200 133.4 19.05 11.10 219.1 214.4 59.2 127 203.2 225 274 198.5 122.5 75
10" 250 158.8 19.05 12.70 273.1 268.28 76.2 155.7 247.7 225 274 198.5 122.5 75
12" 300 165.1 19.05 12.70 323.9 318.29 76.2 181.1 273.1 225 293.5 198.5 132 87
 BS & DIN Valves

Grooved Butterfly Valve Grooved Butterfly Valve

with Tamper Switch (XD381X), with Normally Closed Tamper Switch
UL/FM/VdS Approved (XD381XG)

MATERIAL SPECIFICATION MATERIAL SPECIFICATION

Part No. Part Standard Specification Options Part No. Part Standard Specification Options
1 Body EN-GJS-450-10 1 BODY EN-GJS-450-10
2 O-Ring NBR EPDM 2 O-Ring NBR EPDM
3 Stub Shaft SS431 3 Stub Shaft SS431
XD381X XD381XG
4 Disc EN-GJS-450-10+EPDM EN-GJS-450-10+NBR 4 Disc EN-GJS-450-10+EPDM EN-GJS-450-10+NBR
5 Drive Shaft SS431 5 Drive Shaft SS431
6 Hex Nut Carbon Steel Zinc plated 6 Bolt Carbon Steel Zinc plated
7 Signal Gearbox Body:EN-GJS-450-10 7 Signal Gearbox Body: EN-GJS-450-10
8 O-Ring NBR EPDM 8 O-Ring NBR EPDM

Note: For special material request other than standard specification, please indicate clearly on the inquiry or order list. Note: For special material request other than standard specification, please indicate clearly on the inquiry or order list.

Stem drive by keys, parallel or diagonal square or flat head Stem drive by keys, parallel or diagonal square or flat head

- 80 - 80

ANSI/AWWA C550 or painting upon request ANSI/AWWA C550 or painting upon request

XD381X39

DN Dimensions(mm) DN Dimensions(mm)
Inch mm A B C F G L L1 L2 H1 H W E F N- M ISO5211 Inch mm A B C F G L L1 L2 H1 H W ISO5211
2" 50 89 65 81 60.3 57.15 122.5 7.93 15.88 127 202.2 125 70 90 4- 10 F07 2" 50 89 65 81 60.3 57.15 122.5 7.93 15.88 127 202.2 125 F07
2.5" 65 102 71 97 73.0 69.09 122.5 7.93 15.88 127 202.2 125 70 90 4- 10 F07 2.5" 65 102 71 97 73.0 69.09 122.5 7.93 15.88 127 202.2 125 F07
2.5" 65 102 71 97 76.1 72.26 122.5 7.93 15.88 127 202.2 125 70 90 4- 10 F07 2.5" 65 102 71 97 76.1 72.26 122.5 7.93 15.88 127 202.2 125 F07
3" 80 109 81 97 88.9 84.94 122.5 7.93 15.88 127 202.2 125 70 90 4- 10 F07 3" 80 109 81 97 88.9 84.94 122.5 7.93 15.88 127 202.2 125 F07
4" 100 128 95 116 114.3 110.08 122.5 9.53 15.88 127 202.2 125 70 90 4- 10 F07 4" 100 128 95 116 114.3 110.08 122.5 9.53 15.88 127 202.2 125 F07
5" 125 141 111 148 139.7 135.48 122.5 9.53 15.88 127 202.2 125 70 90 4- 10 F07 5" 125 141 111 148 139.7 135.48 122.5 9.53 15.88 127 202.2 125 F07
5" 125 141 111 148 141.3 137.03 122.5 9.53 15.88 127 202.2 125 70 90 4- 10 F07 5" 125 141 111 148 141.3 137.03 122.5 9.53 15.88 127 202.2 125 F07
6" 150 153 133 148 165.1 160.90 122.5 9.53 15.88 139.5 215 225 70 90 4- 10 F07 6" 150 153 133 148 165.1 160.90 122.5 9.53 15.88 139.5 215 225 F07
6" 150 153 133 148 168.3 163.96 122.5 9.53 15.88 139.5 215 225 70 90 4- 10 F07 6" 150 153 133 148 168.3 163.96 122.5 9.53 15.88 139.5 215 225 F07
8" 200 184 164 133 219.1 214.40 122.5 11.10 19.05 198.5 274 225 102 125 4- 12 F10 8" 200 184 164 133 219.1 214.40 122.5 11.10 19.05 198.5 274 225 F10
10" 250 216 196 159 273.1 268.28 122.5 12.70 19.05 198.5 274 225 102 125 4- 12 F10 10" 250 216 196 159 273.1 268.28 122.5 12.70 19.05 198.5 274 225 F10
12" 300 254 226 165 323.9 318.29 132.0 12.70 19.05 198.5 293.5 225 102 125 4- 12 F10 12" 300 254 226 165 323.9 318.29 132.0 12.70 19.05 198.5 293.5 225 F10

Note: Valve must not be installed with disc in full open position. Disc must be partly closed so that no part is protruding beyond end of valve body.
 BS & DIN Valves

Grooved Resilient OS&Y Gate Valve Grooved Resilient OS&Y

(XZ81X), PN10/16, Gate Valve
UL/FM Approved (Z81XS), PN10/16

MATERIAL SPECIFICATION MATERIAL SPECIFICATION

Part No. Part Standard Specification Options Part No. Part Standard Specification Options
1 Valve Body EN-GJS-450-10 1 Valve Body EN-GJS-450-10
2 Resilient Wedge Disc EN-GJS-450-10+EPDM 2 Resilient Wedge Disc EN-GJS-450-10+EPDM
3 O-Ring NBR EPDM 3 Stem SS420 SS304, SS316
4 Stem Stainless Steel SS304, SS316 4 Bonnet Gasket EPDM NBR
5 Bolt Carbon Steel Zinc Plated SS304, SS316 5 Bonnet EN-GJS-450-10
XZ81X Z81XS
6 Bonnet EN-GJS-450-10 6 O-Ring NBR EPDM
7 Stem Bushing Brass Hpb59-1 Connection Ends: Groove to ISO 6182 7 O-Ring NBR EPDM
8 Gland EN-GJS-450-10 8 Gland EN-GJS-450-10
Working Pressure: PN10/16
Connection Ends: Groove to ISO 6182 9 Flat Washer SS304 SS316 9 Yoke EN-GJS-450-10
10 Stud SS304 SS316
Temperature Range: 0 - 80
Working Pressure: PN10/16 10 Stem Nut EN-GJS-450-10
11 Nut SS304 SS316 Coating: Fusion Bonded Epoxy Coating in accordance with 11 Washer CW617N
Temperature Range: 0 - 80 ANSI/AWWA C550
12 Yoke EN-GJS-450-10 12 Handwheel EN-GJS-450-10
Coating: Fusion Bonded Epoxy Coating in accordance with 13 Stem Nut Brass Hpb59-1 Bronze ZQSn5-5-5 13 Lock Nut Carbon Steel Zinc Plated
ANSI/AWWA C550 or painting upon request 14 Washer Brass Hpb59-1 14 Gland Nut Carbon Steel Zinc Plated SS304, SS316
15 Locknut Carbon Steel Zinc Plated 15 Stud Carbon Steel Zinc Plated SS304, SS316
16 Handwheel EN-GJS-450-10 Pressed Steel 16 Flat Washer Carbon Steel Zinc Plated SS304, SS316
17 Stem Packing EPDM NBR 17 Bolt Carbon Steel Zinc Plated SS304, SS316
18 Bonnet Gasket EPDM NBR
Note: For special material request other than standard specification, please indicate clearly on the inquiry or order list.
Note: For special material request other than standard specification, please indicate clearly on the inquiry or order list.

DN Dimensions(mm)
DN Dimensions(mm) Inch mm L H1 H2 OD d A B
Inch mm L H1(Close) H2(Open) OD d A B 2" 50 140 278 332 60.3 57.15 15.88 7.92
2" 50 178 323 373 60.3 57.15 15.88 7.92 2.5" 65 150 300 366 76.1 72.26 15.88 7.92
2.5" 65 190 343 408 73 69.09 15.88 7.92 3" 80 160 323 405 88.9 84.94 15.88 7.92
2.5" 65 190 343 408 76.1 72.26 15.88 7.92 4" 100 178 391 491 114.3 110.08 15.88 9.52
3" 80 203 370 450 88.9 84.94 15.88 7.92 5" 125 190 461 590 139.7 135.48 15.88 9.52
4" 100 229 442 542 114.3 110.08 15.88 9.52 6" 150 210 530 680 165.1 160.9 15.88 9.52
5" 125 254 541 665 139.7 135.48 15.88 9.52 8" 200 235 660 860 219.1 214.4 19.05 11.1
5" 125 254 541 665 141.3 137.03 15.88 9.52
6" 150 267 608 758 159.0 154.50 15.88 9.52
6" 150 267 608 758 165.1 160.90 15.88 9.52
6" 150 267 608 758 168.3 163.96 15.88 9.52
8" 200 292 720 920 219.1 214.40 19.05 11.13
10" 250 330 939 1193 273.0 268.28 19.05 12.70
12" 300 356 1065 1370 323.9 318.29 19.05 12.70
 BS & DIN Valves

Supervisory Switch for Grooved Resilient NRS Gate Valve

OS&Y Gate Valve (Z85X), PN10/16,
(MXHQ) UL/FM Approved

MATERIAL SPECIFICATION MATERIAL SPECIFICATION

Part No. Part Standard Specification Options Part No. Part Standard Specification Options
1 Outer Shell ADC12 1 Valve Body EN-GJS-450-10
2 Brace Carbon Steel Q235 SS304, SS316 2 Resilient Wedge Disc EN-GJS-450-10+EPDM
3 Micro Switch 3 Stem Stainless Steel SS304, SS316
MXHQ Z85X
4 Base ADC12 4 Bolt Carbon Steel Zinc Plated SS304, SS316
5 Connection Plate Carbon Steel Q235 SS304, SS316 5 Bonnet EN-GJS-450-10
6 Driving Lever SS304 SS316 6 O-Ring NBR EPDM
Service Environment: Indoor or Outdoor use, all parts have 7 Axis Nylon Connection Ends: Groove to ISO 6182 7 Gland EN-GJS-450-10
corrosion resistant finishes 8 Sealing Gasket CR Foam Cotton
Working Pressure: PN10/16 8 Handwheel EN-GJS-450-10 Pressed Steel
Temperature Range: 0 - 80 9 Pressing Sleeve PTFE
Temperature Range: 0 - 80 9 Bolt SS304 SS316
10 Rubber Ring EPDM 10 Flat Washer SS304 SS316
Cover Tamper: Tamper Resistant Screws
11 Clamp Plate Carbon Steel Q235 Coating: Fusion Bonded Epoxy Coating in accordance with
Optional Cover Tamper Switch Available 11 Ring Wiper EPDM NBR
ANSI/AWWA C550 or painting upon request
Note: For special material request other than standard specification, please indicate clearly on the inquiry or order list. 12 Bolt SS304 SS316
Electrical Ratings: 15 Amps at 125/250VAC
13 Flat Washer SS304 SS316
Appliance Standards: NFPA-13, NFPA-13D,
14 O-Ring NBR EPDM
NFPA-13R, NFPA-72
15 Washer Brass HPb59-1
Statement: The Model MXHQ Supervisory Switch is used to DN Dimensions(mm)
16 Bonnet Gasket EPDM NBR
monitor the open or close status of an OS&Y (outside screw
Inch mm A B H L Dmax 17 Wedge Nut Brass HPb59-1 Bronze ZQSn5-5-5
and yoke) type gate valve. There are two sizes, the model
MXHQ D50 serves the OS&Y Gate valves ranging in size 2"-16" 50-400 99 68 148 200 105 Note: For special material request other than standard specification, please indicate clearly on the inquiry or order list.
from 2"-16"(50mm - 400mm), the other model MXHQ D450
is fit for the OS&Y Gate valves ranging in size from 18"- 18"-24" 450-600 99 68 148 360 135
24"(450mm - 600mm).
DN Dimensions(mm)
Inch mm L H OD d A B
2" 50 178 218 60.3 57.15 15.88 7.92
TYPICAL ELECTRICAL CONNECTIONS
2.5" 65 190 230 73 69.09 15.88 7.92
2.5" 65 190 230 76.1 72.26 15.88 7.92
COM. COM. 3" 80 203 281 88.9 84.94 15.88 7.92

N.O. N.O. N.O. 4" 100 229 316 114.3 110.08 15.88 9.52
LOCAL CIRCUIT SW #1 SW #1
N.C. N.C. 5" 125 254 393 139.7 135.48 15.88 9.52
COM. N.C. INDICATING
TO POWER FOR 5" 125 254 393 141.3 137.03 15.88 9.52
INDICATING DEVICE DEVICE
COM. COM. 6" 150 267 420 159.0 154.50 15.88 9.52

N.O. N.O. 6" 150 267 420 165.1 160.90 15.88 9.52
SW #2 SW #2
N.C. N.C. 6" 150 267 420 168.3 163.96 15.88 9.52
N.O. END OF 8" 200 292 490 219.1 214.40 19.05 11.13
TO SUPERVISORY CIRCUIT
OF CONTROL PANEL COM. LINE 10" 250 330 626 273.0 268.28 19.05 12.70
N.C. RESISTOR CLOSED VALVE POSITION OPEN VALVE POSITION
12" 300 356 722 323.9 318.29 19.05 12.70

Contact Ratings: 15 Amps at 125/250VAC

 BS & DIN Valves

Grooved Resilient Swing Double Door Grooved Check Valve

Check Valve (H84X), PN10/16, (DH87XP), PN10/16
UL/FM/LPCB Approved

MATERIAL SPECIFICATION MATERIAL SPECIFICATION

Part No. Part Standard Specification Options Part No. Part Standard Specification Options
H84X 1 Valve Body EN-GJS-450-10 DH87XP 1 Countersunk Hex Head Screws Carbon Steel Zinc Plated
2 Hinge Pin SS420
2 Seal Ring EPDM
CE R

3 Spring SS304 SS316

Cert /LPCB ref. 988b
®
CNBOP-PIB 3 Gasket PTFE
4 Eye Bolt Carbon Steel Zinc Plated
Connection Ends: Groove to ISO 6182 4 Shaft SS420 SS304, SS316, SS431
DN50-100 SS304
5 Disc SS304
DN150-300 EN-GJS-450-10 5 Gasket PTFE
Working Pressure: PN10/16
6 Disc Sealing Ring EPDM NBR 6 Spring SS304
Temperature Range: 0 - 80 - 80
7 Seat Ring ASTM B62 C83600 (Pressed Fit) SS304, SS316 Pressed Fit or Threaded
7 Disc SS304 SS316,QT450-10
Coating: Fusion Bonded Epoxy Coating in accordance with 8 Plug Malleable Iron Galvanized Bronze ASTM B584
8 Body EN-GJS-450-10
ANSI/AWWA C550 or painting upon request 9 Plug Malleable Iron Galvanized Bronze ASTM B584
ANSI/AWWA C550
9 Eye Bolt Carbon Steel Zinc Plated
10 Plug Malleable Iron Galvanized Bronze ASTM B584
11 Plug Malleable Iron Galvanized Bronze ASTM B584 Note: For special material request other than standard specification, please indicate clearly on the inquiry or order list.

12 Bolt SS304 SS316

13 Washer SS304 SS316
14 Nut SS304 SS316 DN Dimensions(mm)

Note: For special material request other than standard specification, please indicate clearly on the inquiry or order list. Inch mm A B C D E F L
8" 219.1 19.1 11.1 214.4 219 200 165 160
10" 273.0 19.1 12.7 268.28 273 253 203 180
12" 323.9 19.1 12.7 318.29 324 307 228 180
DN Dimensions(mm)
14" 377.0 23.8 12.7 371.1 377 354 258 200
P3
Inch mm L D1 D2 B C P1 P2
Standard Optional
2" 50 171 57.15 60.3 7.93 15.88 1/2 1/2 1 3/8
2.5" 65 184 69.09 73 7.93 15.88 1/2 1/2 1 1/4 3/8

H84XF4 2.5" 65 184 72.26 76.1 7.93 15.88 1/2 1/2 1 1/4 3/8
3" 80 197 84.94 88.9 7.93 15.88 1/2 1/2 1 1/4 3/8
4" 100 210 110.08 114.3 9.53 15.88 1/2 1/2 2 1/2
5" 125 248 135.48 139.7 9.53 15.88 1/2 1/2 2 1/2
5" 125 248 137.03 141.3 9.53 15.88 1/2 1/2 2 1/2
6" 150 324 160.9 165.1 9.53 15.88 1/2 1/2 2 1/2
6" 150 324 163.96 168.3 9.53 15.88 1/2 1/2 2 1/2
8" 200 371 214.4 219.1 11.13 19.05 1/2 1/2 2 1/2
10" 250 457 268.28 273 12.7 19.05 1/2 1/2 2 1/2
12" 300 535 318.29 323.9 12.7 19.05 1/2 1/2 2 1/2
 BS & DIN Valves

DIN F4 Flanged Resilient NRS BS Flanged Resilient NRS

Gate Valve (Z45XC), PN10/16, Gate Valve,with Post Flange (Z45XC-2),
UL/FM Approved PN10/16, UL/FM Approved

MATERIAL SPECIFICATION MATERIAL SPECIFICATION

Part No. Part Standard Specification Options Part No. Part Standard Specification Options
1 Valve Body EN-GJS-450-10 1 Valve Body EN-GJS-450-10
2 Resilient Wedge Disc EN-GJS-450-10+EPDM 2 Resilient Wedge Disc EN-GJS-450-10+EPDM
3 Stem Stainless Steel SS304, SS316 3 Stem Stainless Steel SS304, SS316
4 Bolt Carbon Steel Zinc Plated SS304, SS316 4 Bolt Carbon Steel Zinc Plated SS304, SS316
Z45XC 5 Bonnet EN-GJS-450-10 Z45XC-2 5 Bonnet EN-GJS-450-10
6 O-Ring NBR EPDM 6 O-Ring NBR EPDM
7 Gland EN-GJS-450-10 7 Gland EN-GJS-450-10
8 Stem Cap EN-GJS-450-10 8 Stem Cap EN-GJS-450-10
Connection Ends: Flange to DIN EN 1092-2:1997
9 Bolt SS304 SS316 9 Bolt SS304 SS316
Working Pressure: PN10/16 10 Ring Wiper EPDM NBR 10 Ring Wiper EPDM NBR
Temperature Range: 0 - 80 11 Bolt SS304 SS316 - 80 11 Bolt SS304 SS316

Coating: Fusion Bonded Epoxy Coating in accordance with 12 Flat Washer SS304 SS316 12 Flat Washer SS304 SS316

ANSI/AWWA C550 13 O-Ring NBR EPDM ANSI/AWWA C550 13 O-Ring NBR EPDM
14 Thrust Washer Brass HPb59-1 Brass HPb59-1 (Type A)
14 Thrust Washer
Not Available (Type B)
15 Bonnet Gasket EPDM NBR
15 Bonnet Gasket EPDM NBR
16 Wedge Nut Brass HPb59-1 Bronze ZQSn5-5-5
16 Wedge Nut Brass HPb59-1 Bronze ZQSn5-5-5
Note: For special material request other than standard specification, please indicate clearly on the inquiry or order list. 17 Post Flange EN-GJS-450-10

Note: For special material request other than standard specification, please indicate clearly on the inquiry or order list.

DN Dimensions(mm)
PN DN Dimensions(mm)
Inch mm L H D D1 d C T n- L
PN H
2" 50 10/16 150 241 165 125 99 19 3 4- 19 Inch mm L D D1 d C T n-d
TypeA TypeB
2.5" 65 10/16 170 255 185 145 118 19 3 4- 19
Z45X Z45X-1 3" 80 10/16 180 304 200 160 132 19 3 8- 19
4" 100 10/16 229 347 395 220 180 156 19 3 8- 19
5" 125 10/16 254 432 432 250 210 184 19 3 8- 19
4" 100 10/16 190 337 220 180 156 19 3 8- 19
19 6" 150 10/16 267 443 475 285 240 211 19 3 8- 23
5" 125 10/16 200 414 250 210 184 19 3 8-
10 8- 23
6" 150 10/16 210 436 285 240 211 19 3 8- 23 8" 200 292 518 585 340 295 266 20 3
16 12- 23
10 230 506 340 295 266 20 3 8- 23
8" 200 10 350 12- 23
16 230 506 340 295 266 20 3 12- 23 10" 250 330 656 656 405 319 22 3
16 355 12- 28
10 250 644 405 350 319 22 3 12- 23
10" 250 10 400 12- 23
16 250 644 405 355 319 22 3 12- 28 12" 300 356 751 751 460 370 25.4 4
16 410 12- 28
10 270 739 460 400 370 24.5 4 12- 23
12" 300 10 460 16- 23
16 270 739 460 410 370 24.5 4 12- 28 14" 350 381 952 952 520 429 26.5 4
XZ45X-1 XZ45X XZ45X-2 16 470 16- 28
10 515 16- 28
16" 400 406 952 952 580 480 28 4
16 525 16- 31

Note: UL/FM approved from 4" to12"

 BS & DIN Valves

Water Flow Indicator with Retard Water Flow Indicator (ZSJZ),

(ZSJZYS), PN10/16/25 PN10/16

MATERIAL SPECIFICATION

Part No. Part Standard Specification

1 Cover ASTM B85-96 383.0E
MATERIAL SPECIFICATION
2 Body Gasket EPDM
3 Spring SS304 Part No. Part Standard Specification Options
ZSJZYS 4 Air Delay Device PC GV3410R ZSJZ 1 Body EN-GJS-450-10
5 Stem Seal Assembly SS304+NBR 2 Bolt Carbon Steel Zinc Plated SS304, SS316
CSFM 6 Connecting Rod POM 500P
3 Lodicule Plastic
7 Switch Assembly PC GV3410R
4 Nut Carbon Steel Zinc Plated SS304, SS316
Connection Ends: ISO 6182 8 Connection Plate ASTM B85-96 383.0E Connection Ends: ISO 6182
5 Gasket EPDM NBR
9 Connection Plate Seal NBR
Working Pressure: PN10/16/25 Working Pressure: PN10/16 6 Shell Plastic
10 Body ASTM A536,65-45-12
Temperature Range: 0 - 68 11 Vane Assembly PE Temperature Range: 0 - 80 Note: For special material request other than standard specification, please indicate clearly on the inquiry or order list.
Coating: Fusion Bonded Epoxy Coating in accordance with 12 U-Bolts Carbon Steel Zinc Plated Coating: Fusion Bonded Epoxy Coating in accordance with
ANSI/AWWA C550 13 Nuts Carbon Steel Zinc Plated ANSI/AWWA C550
Note: For special material request other than standard specification, please indicate clearly on the inquiry or order list. SWITCH WIRING DIAGRAM

: 15- 37.5L/min WIRING DIAGRAM

DN Dimensions(mm) Hole Dia

Inch mm R A B C D +1.6/0
2" 50 60.3 62 48 36 120 30
2.5" 65 73 62 48 31 130 30
DN Dimensions(mm)
3" 80 88.9 62 48 36.5 145 51
Hole Dia.
Inch mm R A 1.5 B C 1.5 D E 3 Certificate
+1.6/0 4" 100 114.3 62 48 30.5 185 51
2" 50 60.3 116 100 63 140 83.5 30 UL/FM 5" 125 141.3 62 48 36.5 221.5 51
2.5" 65 73 120 100 63 140 83.5 30 UL/FM 6" 150 168.3 62 48 33 254 51
2.5" 65 76.1 122 100 63 140 83.5 30 UL/FM
8" 200 219.1 62 48 36.5 300 51
3" 80 88.9 145 100 63 140 94 51 UL/FM
4" 100 114.3 185 100 63 140 94.5 51 UL/FM
5" 125 139.7 212 100 63 140 94.5 51 UL/FM
5" 125 141.3 212 100 63 140 94.5 51 UL/FM
6" 150 165.1 254 100 63 140 95 51 UL/FM
6" 150 168.3 254 100 63 140 95 51 UL/FM
8" 200 219.1 298 100 63 140 95 51 UL/FM
10" 250 273.0 381 100 63 140 97.5 70

Note: Size 10" is not UL/FM listed.