Atos spa Table E150-9/E

21018 Sesto Calende, Italy - Fax 0331 920005

Hand & mechanical directional valves

ISO/Cetop sizes 03, 05, 07 and 08

Hand & mechanical operated directio-

nal valves are spool type, three or four
way, two or three position, designed to
operate in oil hydraulic systems.
Available with:
DH-00
- mechanical actuator without lever;
- hand-lever;
- cam (only for ISO/Cetop 03 and 05).
Rugged execution suitable for outdoor
use.

DH-0 = ISO/Cetop 03 interface: flow up

to 50 l/min.
DP-21 DK-1 = ISO/Cetop 05 interface: flow up
to 100 l/min.
DP-2 = ISO/Cetop 07 interface: flow up
to 300 l/min.
DP-3 = ISO/Cetop 08 interface: flow up
to 650 l/min.

 body DH-02 Pressure up to 350 bar.

 spool
 mechanical actuator without lever
 lever
 cam

1 MODEL CODE

DH-0 1 1 3 /I ** /*
Directional control valve: Synthetic fluids:
DH-0 = ISO/Cetop 03 /WG = water-glycol
DK-1 = ISO/Cetop 05 /PE = phosphate ester
DP-2 = ISO/Cetop 07
DP-3 = ISO/Cetop 08

Design number
Type of actuator:
0 = mechanical, without lever Options:
1 = hand-lever /A = actuator device mounted on side of port B
2 = cam (only for DH-0 and DK-1) Only for hand-lever valves:
/C = short hand - lever and reducend actuation force
(only for DH-01)
Only for configuration 6, 7, 8, of hand-lever valves, see
Valve configuration, see section  section  and  for hydraulic connections:
0 = free, without springs /I = in rest position the lever is inclined towards the
1 = spring centered, without detent valve body
2 = retun to internal position (lever toward extern) /E = in rest position the lever is inclined in opposite side
3 = return to external position (lever toward the valve) Only for DK-1:
4 = 3 position, with detent /Y = external drain
5 = 2 external positions, with detent
6 = centre plus external positions, with detent
7 = return to external position from the centre position
8 = return to the centre position from the external position Spool type, see section 

2 HYDRAULIC CHARACTERISTICS

DH-00 DH-01 DH-02 DP-20 DP-21

(DK-10 is analogous) (DK-11 is analogous) (DK-12 is analogous) (DP-30 is analogous) (DP-31 is analogous)

Valve model DH-0 DK-1 DP-2 DP-3

Max recommended flow [l/min] 50 100 300 650
Max pressure on port P, A, B [bar] 350 315 350
Max pressure on port T [bar] 160 250

E150
 3 MAIN CHARACTERISTICS OF HAND & MECHANICAL OPERATED DIRECTIONAL VALVES

Assembly position / location Any position.

Subplate surface finishing Roughness index 0,4 , flatness ratio 0,01/100 (ISO 1101)

Ambient temperature -20°C to + 70°

Fluid Hydraulic oil as per DIN 51524...535, for other fluids see section 

Recommended viscosity 15 ÷ 100 mm2/s at 40°C (ISO VG 15 ÷ 100)

Fluid contamination class ISO 19/16, achieved with in line filters at 25 µm value and ß25 ≥ 75 (recommended)

Fluid temperature T ≤ 80°C if T ≥ 60°C select /PE seals

4 VALVE CONFIGURATION

DH-011 DH-012 DH-013 DH-014 DH-015

DK-111 DK-112 DK-113 DK-114 DK-115

DH-016*/I DH-016*/E DH-016*/IA DH-017*/I DH-017*/E

DK-116*/I DK-116*/E DK-116*/IA DK-117*/I DK-117*/E

DH-016*/EA
DK-116*/EA

DH-017*/IA DH-018*/I DH-018*/E DH-018*/IA

DK-117*/IA DK-118*/I DK-118*/E DK-118*/IA

DH-017*/EA DH-018*EA
DK-117*/EA DK-118*/EA
DH-0230/2 DH-0232/2 DH-027* DH-028*
DH-0231/2 DK-1232/2 DK-127* DK-128*
DK-1230/2
DK-1231/2

DP-211* DP-212* DP-213* DP-214* DP-215*

DP-311* DP-312* DP-313* DP-314* DP-315*

DP-216*/I DP-216*/E DP-216*/IA DP-217*/I DP-217*/E

DP-316*/I DP-316*/E DP-316*/IA DP-317*/I DP-317*/E

DP-216*/EA
DP-316*/EA

DP-217*/IA DP-218*/I DP-218*/E DP-218*/IA

DP-317*/IA DP-318*/I DP-318*/E DP-318*/IA

DP-217*/EA DP-218*/EA
DP-317*/EA DP-318*/EA

(1) Where the symbol doesn't show the hydraulic connection (*), it depends by the central configuration of the spool, see table  .
(2) All the configuration shown for the lever operated valves are also available for valves actuated by mechanic without lever device.

5 SPOOLS - for intermediate passages, see tab. E001

NOTES
- Spools type 0/2, 1/2, 2/2 are only used for valves
0 3 6
0/2 type DH-023*/2 and DK 123*/2;
- Spools type 0 and 3 are also available as 0/1 and
3/1, where in centre position oil passage from ports
to tank are restricted;
1 4 7 - Spools type 1,4 and 5 are also available as 1/1, 4/8
1/2 and 5/1. They are properly shaped to reduce water-
hammer shocks during the switching;
- On request, other type of spools are available.
2 5 8
2/2
 6 DIMENSIONS OF HAND & MECHANICAL OPERATED VALVES ISO/Cetop 03 [mm]

DH-00** DH-01**

DH-01**/C Mass: 1,6 Kg

Mass: 1,2 Kg

DH-02**

P
A B
T P = PRESSURE PORT
A, B = USE PORT
T = TANK PORT
For the max pressures on ports,
see section 

ISO/Cetop 03 MOUNTING SURFACE

Fastening bolts: 4 socket head screws M5 x 50
Diameter of ports A, B, P, T: Ø = 7,5 mm (max)
Working stroke: 2,5 mm; extra-stroke: 0,5 mm max. Mass: 1,2 Kg Seals: 4 OR 108
Mounting subplates: see tab. E010
7 DIMENSIONS OF HAND & MECHANICAL OPERATED VALVES ISO/Cetop 05 [mm]

DK-10** DK-11**

Mass: 2,5 Kg Mass: 2,8 Kg

DK-12**

P = PRESSURE PORT
A, B = USE PORT
T = TANK PORT
Y = DRAIN PORT
For the max pressures on ports, see
section 

Note: port Y is normally plugged;

for option /Y it must be connected
separately and directly to tank

ISO/Cetop 05 MOUNTING SURFACE

Fastening bolts: 4 socket head screws M6x40
Diameter of ports A, B, P, T: Ø = 11,2 mm (max)
Working stroke: 4 mm; extra-stroke: 0,5 mm max. Mass: 2,5 Kg Seals: 5 OR 2050

Mounting subplates: see tab. E020 E150

 8 DIMENSIONS OF HAND & MECHANICAL OPERATED VALVES ISO/Cetop 07 [mm]

DP-20

ISO/Cetop 07 MOUNTING SURFACE

Fastening bolts:
4 socket head screws M10 x 50
2 socket head screws M6 x 40
Diameter of ports A, B, P, T : Ø = 20 mm
Diameter of ports X,Y: Ø = 7 mm
Seals: 4 OR 130, 3 OR 109

L A B Y
X
T P
Mass: 9,7 Kg

DP-21

P = PRESSURE PORT
A, B = USE PORT
T = TANK PORT
X = EXTERNAL OIL PILOT PORT not used
Y = DRAIN PORT
L = DRAIN PORT FOR HYDRAULIC CENTERING
DEVICE not used
For the max pressures on ports, see section 

Note: ports X, L are not used.

Port Y for drain must be connected directly to tank.
Mass: 10 Kg No counter pressure are allowed on Y port.
Mounting subplates: see tab. E075
9 DIMENSIONS OF HAND & MECHANICAL OPERATED VALVES ISO/Cetop 08 [mm]

DP-30

ISO/Cetop 08 MOUNTING SURFACE

Fastening bolts:
6 socket head screws M12 x 50
Diameter of ports A, B, P, T : Ø = 24 mm
Diameter of ports X,Y: Ø = 7 mm
Seals: 4 OR 4112, 3 OR 3056

X
A B
L
Y
T P
Mass: 15,2 Kg

DP-31

P = PRESSURE PORT
A, B = USE PORT
T = TANK PORT
X = EXTERNAL OIL PILOT PORT not used
Y = DRAIN PORT
L = DRAIN PORT FOR HYDRAULIC CENTERING
DEVICE not used
For the max pressures on ports, see section 

Note: ports X, L are not used.

Port Y for drain must be connected directly to
Mass: 15,5 Kg tank. No counter pressure are allowed on Y port.
12/01
Mounting subplates: see tab. E075