Scribd
Upload
58 views1 page

2012 Chugoku Af T

CHUGOKU AF-T is a bioactive anti-fouling paint designed for steel ship bottoms, providing strong adhesion and effective marine organism prevention. It has specific technical data including a reddish brown color, a specific gravity of 1.55 kg/l, and various drying times based on temperature. The paint can be applied using airless spray, brush, or roller methods and requires specific conditions for optimal application.

Uploaded by

Christina
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
58 views1 page

2012 Chugoku Af T

CHUGOKU AF-T is a bioactive anti-fouling paint designed for steel ship bottoms, providing strong adhesion and effective marine organism prevention. It has specific technical data including a reddish brown color, a specific gravity of 1.55 kg/l, and various drying times based on temperature. The paint can be applied using airless spray, brush, or roller methods and requires specific conditions for optimal application.

Uploaded by

Christina
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

No.

2012
CHUGOKU AF – T
CPI

CHUGOKU AF-T is conventional bottom paint with a loading of bioactive materials, which are effective to
prevent attachment of marine organism.

It adheres strongly to SILVAX and CHUGOKU AC to form a solid tough film.

TECHNICAL DATA
Type : Oleo resinous anti-fouling paint
Recommended Use : Anti fouling finish of steel ship’s bottom
Colour : Reddish brown
Specific Gravity : 1.55 kg/l
Flash Point : 28°C
Solids by Volume : 63.4 %
Coverage(Theoretical) : 0.071 L/m² ; 110 gr/m²
Wet Film Thickness : 2.84 mils ; 71 µ
Dry Film Thickness : 1.80 mils ; 45 µ
Drying Time : Temperature 5°C 10°C 20°C 30°C
Surface Dry 4 hrs. 3 hrs. 2 hrs. 1.5 hrs.
Hard Dry 16 hrs. 12 hrs. 8 hrs. 6 hrs.
Painting Interval : Minimum 23 hrs. 17 hrs. 13 hrs. 9 hrs.
Maximum 15 days 10 days 7 days 5 days
Dry to Launch : Minimum 24 hrs. 18 hrs. 14 hrs. 10 hrs.
Maximum 15 days 10 days 7 days 5 days
Thinner : MARINE THINNER
Method of Application : Airless Spray, Brush, Roller
Conditions of Application : Temperature Minimum 0°C
Humidity Maximum 90 % R.H.
For Airless Spray ;
Tip No. GRACO 719, 721
Paint output pressure 120 - 150 kg/cm²
Viscosity 70 sec. (Ford Cup No. 4)
Thinning 0 - 5% by volume
Preferable Preceding Coats : N-SILVAX, SILVAX QD, CHUGOKU AC, RAVAX AC, etc.
Packaging : One pack product

The Information given in this sheet is effective at the date shown above and subject to revision from time to time without notice

You might also like