SOLENOID PILOT VALVES 2

3/2
Series
with 290/390 valves, 32, 50 & 63 mm operators
direct operated NC
3 1
189/banjo
356
1

1/8 3 2

FEATURES
• Compact design and low weight enabling easy installation on all series 290 &
390 valves with 32, 50 & 63 mm operators
• Manual operator allows an easy installation
• AC/DC interchangeability of the solenoid without disassembly of the valve
• Simple installation (supply port, solenoid valve body, coil and connector rotatable
through 360°), built-in exhaust regulator (pilot valve series 189/banjo coupling)
• Compliance with UL and CSA standards (pilot valve series 356 coupling)
• The solenoid valves satisfy all relevant EC Directives
GENERAL
Differential pressure See «SPECIFICATIONS» [1 bar =100 kPa]
Maximum viscosity 40 cSt (mm2/s)
Response time See page V402-7
pilot temperature
fluids () seal materials ()
(series) range (TS)
189 banjo filtered air NBR (nitrile)
-10°C to +60°C
356 filtered air and water FPM (fluoroelastomer)

MATERIALS IN CONTACT WITH FLUID

() Ensure that the compatibility of the fluids in contact with the materials is verified
Banjo pilot 189 Pilot 356 D
Body PA, Brass or
glass fibre reinforced stainless steel AISI 316
Core tube Brass Stainless steel
Core and plugnut Stainless steel Stainless steel
Springs Stainless steel Stainless steel
Seats PA + Stainless steel Brass or stainless steel
Seals NBR FPM
Shading coil Copper Copper
banjo pilot 189
ELECTRICAL CHARACTERISTICS
Coil insulation class F
Connector Spade plug (cable Ø 6-8 mm)
Connector specification DIN 43650, 11 mm, industry standard B
Electrical safety IEC 335
Electrical enclosure protection Moulded IP65 (EN 60529)
Standard voltages DC (=) : 24V - 48V
(Other voltages and 60 Hz on request) AC (~) : 24V - 48V - 115V - 230V / 50 Hz
power ratings operator
ambient replacement coil
prefix inrush holding hot/cold temperature type (1)
option ~ ~ = range (TS) ~ =
(VA) (VA) (W) (W) (C°) 230 V/50 Hz 24 V DC pilot 356
- 6 3,5 2,5 2,5 / 3 -10 to +60 400127-097 400904-542 01
SC 12 6 4 5 / 6,9 -10 to +60 400127-197 400127-142 02
(1)
Refer to the dimensional drawings on the following page.
Availability, design and specifications are subject to change without notice. All rights reserved.

SPECIFICATIONS
operating pressure
flow differential (bar) catalogue
orifice number
pipe coefficient max. (PS) power coil
size
size Kv (W)
min. with maintained
air () water ()
2↔1 1-2→3 2↔1 1-2→3
(4)
manual operator
G (mm) (mm) (m3/h) (l/min) (m3/h) (l/min) ~ = ~ = ~/=
NC - Normally closed, series 189 banjo pilot
1/8 (2) 1,2 1,2 0,03 0,5 0,04 0,7 0 10 10 - - 2,5 3 18900032
NC - Normally closed, series 189 banjo pilot with built-in exhaust regulator
1/8 (2)(5) 1,2 1,2 0,03 0,5 0,04 0,7 0 10 10 - - 2,5 3 18900047
NC - Normally closed, series 356 pilot, brass body
1/8 (2) 1,6 1,2 0,08 1,33 0,05 0,8 0 10 10 10 10 4 6,9 SCG356B053VMS (3)
NC - Normally closed, series 356 pilot, stainless steel body
1/8 (2) 1,6 1,2 0,08 1,33 0,05 0,8 0 10 10 10 10 4 6,9 SCG356B058VMS (3)
(2)
Pipe size:
- Port 1: O.D. 4 mm instant fitting (189 banjo) / 1/8 (series 356)
- Port 2: 1/8
00056GB-2013/R02

- Port 3 (exhaust): M5
(3)
Solenoid valve with 1/8 adapter.
(4)
Refer to leaflets on series 290/390 valves which show the minimum pilot pressure for each version of the product.
(5)
Exhaust regulator integrated at port 3, M5.

All leaflets are available on: www.asconumatics.eu

Pneutrol International Ltd are Platinium Distributors for ASCO Numatics V439-1
Contact us : 5 Caulside Drive, Antrim, Northern Ireland, BT41 2DU www.valves-direct.com [email protected] Tel: +44 (0) 28 9448 1800
 SOLENOID PILOT VALVES SERIES 189/banjo-356
OPTIONS
• Explosionproof enclosures for use in zones 1/21-2/22, categories 2-3 to ATEX Directive 94/9/EC (see “Explosionproof solenoids” section)
• Plug with visual indication and peak voltage suppression or with cable length of 2 m (see Solenoids, Coils & Accessories section)
• M5 exhaust regulator to fit port 3, catalogue number: 34600380

INSTALLATION
• The solenoid valves can be mounted in any position without affecting operation
• Pipe connection identifier is G = G (ISO 228/1)
• Installation/maintenance instructions are included with each valve

ORDERING EXAMPLES:
18900032 230V / 50 Hz
SC G356B053 VMS 24V / DC
SC G356B053 VMS 230V / 50 Hz
voltage
catalogue number

DIMENSIONS (mm), WEIGHT

TYPE 01 TYPE 02
Pilot 189/banjo Prefix “SC” Solenoid
Epoxy moulded Pilot 356
IEC 335 / DIN 43650 Epoxy moulded
IP65 IEC 335 / DIN 43650 / IP65
18900032 - 18900047 SCG356B053VMS - SCG356B058VMS

1
1 18
0°
O
PN
3

3
32 and 50 mm operators

32 and 50 mm operators
D

Ø M5
D

D
18

0°

2
0°

18

1/8
36

D
0°

0°
36 °
Ø M5 3

36
60

1/8
18

0°
PN 1/8
C
0°

2
0°
2 0°
36

36 36
0°

4 mm 1 2
36

0° 1
0°

36 1 1 0°
O 0° 0°
PN 36 36 1/8 36
NC
A P 4 mm 69
B C A B 63
C E
°

E
50

°
°

50

50
50

1
1 Ø M5
Ø M5 3 3
D

3 3
18

1/8
0°
18

Availability, design and specifications are subject to change without notice. All rights reserved.
0°

0°
° 36
0
63 mm operator

63 mm operator

36
180°

360°
360° 2 360°
180°

360°

2 1
PNO PNC 1
36

2 NO
0°

4 mm
P 1/8 1/8
36

360°
360°

PNC PNO 2
0°

NO NC
P 1 4 mm 0 ° P
NC 36
0° P 1 1/8
36
A B C A
B C B A B
A

C C
°
50
°
50

1 Exhaust regulator
prefix operator D pilot inlet port
type pilot A B C E weight (1) location
option diameter
NC NO NC NO
32 mm 27 78,5 113,5 79 102 85
01 - 189/banjo series 50 mm 43 93 149 67 83 74 PNC PNO 0,175
00056GB-2013/R01

63 mm 50,5 100 156 53 62 -

32 mm 27 68 102 65 90 85
02 SC 356 series 50 mm 43 84 118 56 80 74 PNC PNO 0,165
63 mm 50,5 91,5 125,5 41 59 -
(1)
including adapter connection (series 356), coil and connector.

All leaflets are available on: www.asconumatics.eu

V439-2 Pneutrol International Ltd are Platinium Distributors for ASCO Numatics
Contact us : 5 Caulside Drive, Antrim, Northern Ireland, BT41 2DU www.valves-direct.com [email protected] Tel: +44 (0) 28 9448 1800