Annex 1a- BOQ - Rehabilitation of Robat Sangi Olya Water Supply Network

Program: Lifesaving integrated emergency response to vulnerable crisis-affected populations in Afghanistan (BHA)
Donor: BHA
Province: Herat
District: Kushk-e-Robat Sangi
Village Robat Sangi Olya
Unit cost Remarks (Responsible if
No Item description Unit Quantity Total Cost (USD)
(USD) applicable)
Indian Dug well

Excavation work above the water level: Provide all necessary materials, tools, equipment, and
labors for the excavation of well in 3m in its diameter and 20m in its depth by hand including
1 m3 98.91
running cost of water pump for drying of water during the work., all the work should be according
to the SoW, Mercy Corps engineer's instructions and the drawings.

Excavation work below the water level: Provide all necessary materials, tools, equipment, and
labors for the excavation of well in 3m in its diameter and 20m in its depth by hand including
2 m3 77.715
running cost of water pump for drying of water during the work., all the work should be according
to the SoW, Mercy Corps engineer's instructions and the drawings.

Pump test: Providing all necessary material, tools, equipment, and labor for conducting of pump
3 test for determination of discharge of well and taking sample of water for quality test after water Hour 12
cleaning. All the work should be according to the SoW, and Mercy Corps engineer's instructions.

RCC Concrete work: Provide all necessary materials, tools, equipment, and labors for casting of
Reinforced Cement Concrete RCC (1: 1.5: 3) M20 for the rings and its cover Dia=2.6m. all the 3
4 m 25.170
work should be according to the SoW, Mercy Corps engineer's instructions and the drawings.
including steel bars and shuttering according to the drawings

Gravel Back filling: Provide all necessary materials, tools, equipment, and labors for graverl
packing behind of well priemeter in thickness of 20cm from bottom of well up to 12 meters in its 3
5 m 19.3424
height. all the work should be according to the SoW, Mercy Corps engineer's instructions, and
drawings.
Clay soil Back filling: Provide all necessary materials, tools, equipment, and labors for clay
packing behind of well priemeter in thickness of 20cm from 20cm beneath the ground level to the
6 depth of 8m. all the work should be according to the SoW, Mercy Corps engineer's instructions, m3 24.26592
and drawings.

PCC Concrete work: Provide all necessary materials, tools, equipment, and labors for casting the
Plain Cement Concrete PCC (1: 2: 4) Class M15 above the ground level around the ring priemeter,
7 m3 0.36267
all the work should be according to the SoW, Mercy Corps engineer's instructions and the
drawings.
8 Plastic rope: Providing plastic rope in (20mm dia.) for installation of pump in the well. m 50
9 Supply and installaiton of Galvanized Iron (GI) pipe, inside diameter 2" m

Chlorination of Well: supply and pouring of chlorine 0ff 30% in powder type for chlorination of
10 Job 1
well. All the work should be according to the SoW, and Mercy Corps engineer's instructions.

Sub Total of spring and chambers rehabilitation -

PCC Concrete work: Provide all necessary materials, tools, equipment, and labors for casting the
Plain Cement Concrete PCC (1: 2: 4) Class M15 for the foundation and cap of stone masonry
2 m3 3.3
foundation wall, all the work should be according to the SoW, Mercy Corps engineer's instructions
and the drawings
Stone Masonry: Supply and place hard, tough, free of crakes and sand holes, cavities, dense,
uniform mountain stone for stone masonry foundation walls with minimum 40 Mpa Compressive
3 m3 22
strength, with cement mortar (1:4) all the work should be according to the SoW, Mercy Corps
engineer's instructions and the drawings
Pointing Stone Masonry: Provide all necessary materials, tools, equipment, and labors for laying
4 of cement mortar (1:4) all the work should be according to the SoW, Mercy Corps engineer's m2 26.4
instructions and the drawings
GI Pipe 2.5inch: Provide, supply and installation of GI pipe (2.5 inch-63mm outside diameter, 2
inch-50mm inside diameter) and 3m long as stand posting for fencing of all boundary including
5 m 59
door. all the work should be according to the SoW, Mercy Corps engineer's instructions and the
drawings.
GI Pipe 2.5inch: Provide, supply and installation of GI pipe 2.5 inch-63mm outside diameter, 2
inch50mm inside diameter as hinge for passing of spiral barbed wire, in 1.2meter long 2*0.6m for
6 m 21.6
both sides. all the work should be according to the SoW, Mercy Corps engineer's instructions and
the drawings.
 GI Pipe 2inch: Provide, supply and installation of GI pipe 2 inch-50mm outside diameter, 1.5
inch-40mm inside diameter in the top of fencing as tension rod for prevention of buckling of
7 m 44
standposts, all the work should be according to the SoW, Mercy Corps engineer's instructions and
the drawings.
Longitudinal Barbed wire: Supply and installation of barbed wire in specification of 2.8mm dia,
Length unit weight of 0.1kgr/m, 4 pcs in each spiral wire ( one in bottom, one in top, and two
8 m 176
other in the sides of sprial barbed wire). All the work should be according to MC engineer's
instructions, sow, and drawings.
Fencing: provide, supply, and installation of fence made of 4mm-dia galvanized wire, at
9 5cm*5cm mesh size, unit square meter of 4.4 kg/m2 , in height of 2.6m and longness of 44m, m2 114.4
according to the drawings, MC engineers instruction, and sow.
Galvanized Spiral Barbed wire: provide, supply, and installation of spiral barbed wire, made of
10 m 44
stainless steel, 2mm dia.
Fencing accessories: provide, supply, and installation of all related accessories needed while
11 ls 1
fencing.
Sub Total of fence wall
Distribution of Network Pipes
Excavation of pipe trench: Provide all necessary materials, tools, equipment, and labors for the
1 excavation of the natural ground to the required levels for pipe lying, all the work should be m3 301
according to the SoW, Mercy Corps engineer's instructions and the drawings
Filling of pipe trench with sandy clay : Provide all necessary materials, tools, equipment, and
labors for filling of the trenches by using sandy clay/fine excavated material from approved
2 m3 299
excavated source, all the work should be according to the SoW, Mercy Corps engineer's
instructions and the drawings
Polyethylene Pipe: Supply and installation of PE Pipe outside diameter 2in(63mm)- 1.5in
3 (50mm inside diameter) with PE100, PN10,SDR17, (according to ISO 4427 ), all the work should m 225
be according to the SoW, Mercy Corps engineer's instructions and the drawings
Polyethylene Pipe: Supply and installation of PE Pipe (Inside diameter 2.5in(75mm)) (outside
4 diameter 3in(90mm)) with PE100, PN10,SDR17 all the work should be according to the SoW, m 330
Mercy Corps engineer's instructions and the drawings
Flanged Gate valve 3": Supply and installation of 3in AB flanged gate valve all the work should
5 Pcs 1
be according to the SoW, Mercy Corps engineer's instructions and the drawings
Galvanized iron pipe 3": Supply and installtion of 3in outside diamter GI Pipes all the work
6 m 20
should be according to the SoW, Mercy Corps engineer's instructions and the drawings

Fittings: Provide all necessary materials, tools, equipment, and labors for installation of all
7 necessary fittings (Couple,Threeway,elbow) all the work should be according to the SoW, Mercy LS 1
Corps engineer's instructions and the drawings
Sub Total of piping
RCC Reservoir 30m3
Excavation work: Provide all necessary materials, tools, equipment, and labors for the excavation
1 of the natural ground to the required levels for foundation of reservoir, all the work should be m3 29.772
according to the SoW, Mercy Corps engineer's instructions and the drawings

Back filling: Provide all necessary materials, tools, equipment, and labors for backfilling of
2 reservior. all the work should be according to the SoW, Mercy Corps engineer's instructions and m3 4.704
the drawings

PCC Concrete work: Provide all necessary materials, tools, equipment, and labors for casting the
3 Plain Cement Concrete PCC (1: 2: 4) Class M15 for the roof and bed of reservoir, all the work m3 3.3275
should be according to the SoW, Mercy Corps engineer's instructions and the drawings
 RCC Concrete work: Provide all necessary materials, tools, equipment, and labors for casting
4 the Reinforced Cement Concrete RCC (1: 1: 2) Class M25for all the reservoir frame, all the work m3 15.588
should be according to the SoW, Mercy Corps engineer's instructions and the drawings

Inside Plaster work: Provide all necessary materials, tools, equipment, and labors for plastering
with thickness of 25mm, cement-sand + padlow powder M: 1:3 mixing for inside of reservoir. all
5 m2 59.63
the work should be according to the SoW, Mercy Corps engineer's instructions and the
drawingsM: 1:3. 1:3‫پلسترکاری داخلی با پودر ضد نفوذ آب‬

Outside Plaster work: Provide all necessary materials, tools, equipment, and labors for plastering
6 with thickness of 25mm, M: 1:3 for outside of reservoir. all the work should be according to the m2 42.56
SoW, Mercy Corps engineer's instructions and the drawings 1:3. 1:3 ‫پلسترکاری خارجی‬

Painting work: Provide all necessary materials, tools, equipment, and labors for coloring of all
7 visible side of reservoir from plastic type with 75% emulsion and painting of LOGO according m2 51.35
to MC enginners instruction.
Insulation work: Provide all necessary materials, tools, equipment, and labors for isogam
8 m2 16.32
insulation on roof of the reservoir. ‫ایزوگام برای پوشش ذخیره‬
Supply and installation of Iron Ladder for reservoir with all required activites according to
9 No 1
drawings. ‫زینه فلزی‬
Supply and installation of Galvanized Iron pipe for the inlet of purposed net work, inside
10 m 5
dia.2" with flange ‫پایپ آهني ملمع جستی بقطرداخلي دو انچ همراه با فلنج‬
Supply and installation of Galvanized Iron pipe for the outlet of purposed net work, Internal
11 m 8
dia.3" with flange ‫پایپ آهني ملمع جستی بقطرداخلي سه انچ همراه با فلنج‬
Supply and installation of AB Flanged Gate valve Nominal Diameter = 3" for distribution
12 No 1
system ‫تهیه ونصب گیت وال چدن فلنج دار به قطرسه انچ‬

13 Supply and installation of Galvanized fitting Ls 1

14 Supply and installation of Iron Door (1x1) m ‫تهیه ونصب دروازه آهنی‬ No 1

Glass wool and ironsheet coverage of reservoir pipes: supply and installation of glass wool in
15 thickness of 10cm and iron sheet of 0.5mm galvanized iros sheet for covering of pipes where m 10
exposed to the atmosphere according to sow, drawings and MC engineer's instructions.

Water stopper: supply and installation of water stopper in specification of 20cm width,
16 m 14.8
fully flexible.
Sub Total of reseroir -
TOTAL IN USD : -