HCD-EH15

SERVICE MANUAL Canadian Model

UK Model
Ver. 1.1 2008.07
E Model
Australian Model
Russian Model

• HCD-EH15 is the amplifier, CD player, tape

deck and tuner section in CMT-EH15.

Model Name Using Similar Mechanism NEW

CD
Base Unit Name BU-K8BD90-WOD
Section
Optical Pick-up Name KSM-213CDP
Tape Model Name Using Similar Mechanism NEW
Section Tape Transport Mechanism Type MF-EH10

SPECIFICATIONS
Amplifier section FM tuner section:
European and Russian models: Tuning range
DIN power output (rated): 4 + 4 W (4 ohms at 1 kHz, DIN) Canadian model: 87.5 108.0 MHz (100 kHz step)
Continuous RMS power output (reference): 5 + 5 W (4 ohms at 1 kHz, Other models: 87.5 108.0 MHz (50 kHz step)
10% THD) Intermediate frequency: 10.7 MHz
Music power output (reference): 7 + 7 W AM tuner section:
Other models: Tuning range
DIN power output (rated): 4 + 4 W (4 ohms at 1 kHz, DIN) Canadian and Latin American models:
Continuous RMS power output (reference): 5 + 5 W (4 ohms at 1 kHz, 530 1,710 kHz (with 10 kHz tuning interval)
10% THD) 531 1,710 kHz (with 9 kHz tuning interval)
Inputs European and Russian models:
AUDIO IN (stereo mini jack): Sensitivity 800 mV, impedance 47 kilohms 531 1,602 kHz (with 9 kHz tuning interval)
Outputs Australian model:
PHONES (stereo mini jack): Accepts headphones with an impedance of 531 1,710 kHz (with 9 kHz tuning interval)
8 ohms or more 530 1,710 kHz (with 10 kHz tuning interval)
SPEAKER: Accepts impedance of 4 ohms Other models:
531 1,602 kHz (with 9 kHz tuning interval)
CD player section
530 1,610 kHz (with 10 kHz tuning interval)
System: Compact disc and digital audio system
Intermediate frequency: 450 kHz
Laser Diode Properties
Emission Duration: Continuous General
Laser Output*: Less than 44.6μW Power requirements:
* This output is the value measurement at a distance of 200 mm from the Canadian model: AC 120 V, 60 Hz
objective lens surface on the Optical Pick-up Block with 7 mm aperture. Mexican model: AC 120 V, 60 Hz
Frequency response: 20 Hz 20 kHz European and Russian models: AC 230 V, 50/60 Hz
Signal-to-noise ratio: More than 90 dB Australian model: AC 230 240 V, 50/60 Hz
Dynamic range: More than 90 dB Argentine and Thai models: AC 220 V, 50/60 Hz
Brazilian model: AC 127 or 220 V, 50/60 Hz
Tape deck section Korean model: AC 220 V, 60 Hz
Recording system: 4-track 2-channel, stereo Taiwan model: AC 120 V, 50/60 Hz
Tuner section Other models: AC 110 120 or 220 240 V, 50/60 Hz
FM stereo, FM/AM superheterodyne tuner Adjustable with voltage selector
Antenna: Power consumption: 25 W
FM lead antenna Dimensions (w/h/d) (excl. speakers): Approx. 155 × 241 × 224.6 mm
AM loop antenna Mass (excl. speakers): Approx. 2.2 kg

Design and specifications are subject to change without notice.

COMPACT DISC DECK RECEIVER

9-889-094-02 Sony Corporation
2008G05-1 Audio&Video Business Group
© 2008.07 Published by Sony Techno Create Corporation
HCD-EH15
Ver. 1.1

Notes on chip component replacement TABLE OF CONTENTS

• Never reuse a disconnected chip component.
• Notice that the minus side of a tantalum capacitor may be dam- 1. SERVICING NOTES ............................................. 3
aged by heat.
2. GENERAL .................................................................. 4
CAUTION
Use of controls or adjustments or performance of procedures other than 3. DISASSEMBLY
those specified herein may result in hazardous radiation exposure. 3-1. Disassembly Flow ........................................................... 6
3-2. Rear Cabinet Block ......................................................... 6
This appliance is classified 3-3. Front Cabinet Block, Top Cabinet Block,
as a CLASS 1 LASER MAIN Board ................................................................... 7
product. This marking 3-4. MF-EH10 (Tape Mechanism Deck), Cassette Lid.......... 7
is located on the rear 3-5. Base Unit Block (BU-K8BD90-WOD) .......................... 8
exterior. 3-6. Optical Pick-up Block (KSM-213CDP) ......................... 8

4. TEST MODE ............................................................ 9

5. MECHANICAL ADJUSTMENTS ...................... 10

6. ELECTRICAL ADJUSTMENTS ........................ 10

7. DIAGRAMS
7-1. Printed Wiring Board - CD Board - ................................ 14
7-2. Schematic Diagram - CD Board - ................................... 15
7-3. Printed Wiring Board - PANEL Board - ......................... 16
7-4. Schematic Diagram - PANEL Board - ............................ 17
7-5. Schematic Diagram - MAIN Section (1/2) - ................... 18
7-6. Schematic Diagram - MAIN Section (2/2) - ................... 19
7-7. Printed Wiring Boards - MAIN Section - ....................... 20

8. EXPLODED VIEWS
8-1. Overall Section ............................................................... 27
8-2. Front Cabinet Section ..................................................... 28
8-3. Top Cabinet Section ........................................................ 29
8-4. Base Unit Section (BU-K8BD90-WOD) ........................ 30

9. ELECTRICAL PARTS LIST .............................. 31

Note: Refer to supplement-1 for the MAIN board of printed wiring

board, schematic diagram and electrical parts list of Brazil-
ian and Thai models.

SAFETY-RELATED COMPONET WARNING!

COMPONENTS IDENTIFIED BY MARK 0 OR DOTTED LINE

WITH MARK 0 ON THE SCHEMATIC DIAGRAMS AND IN
THE PARTS LIST ARE CRITICAL TO SAFE OPERATION.
REPLACE THESE COMPONENTS WITH SONY PARTS
WHOSE PART NUMBERS APPEAR AS SHOWN IN THIS
MANUAL OR IN SUPPLEMENTS PUBLISHED BY SONY.

ATTENTION AU COMPOSANT AYANT RAPPORT

À LA SÉCURITÉ!

LES COMPOSANTS IDENTIFIÉS PAR UNE MARQUE 0 SUR

LES DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES
PIÈCES SONT CRITIQUES POUR LA SÉCURITÉ DE FONC-
TIONNEMENT. NE REMPLACER CES COM- POSANTS QUE
PAR DES PIÈCES SONY DONT LES NUMÉROS SONT DON-
NÉS DANS CE MANUEL OU DANS LES SUPPLÉMENTS
PUBLIÉS PAR SONY.

2
 HCD-EH15
SECTION 1 Ver. 1.1
SERVICING NOTES
MODEL IDENTIFICATION
NOTES ON HANDLING THE OPTICAL PICK-UP
BLOCK OR BASE UNIT – Rear Cabinet –

The laser diode in the optical pick-up block may suffer electrostat-
ic break-down because of the potential difference generated by the
charged electrostatic load, etc. on clothing and the human body.
During repair, pay attention to electrostatic break-down and also
use the procedure in the printed matter which is included in the
repair parts.
The flexible board is easily damaged and should be handled with
care.

NOTES ON LASER DIODE EMISSION CHECK

The laser beam on this model is concentrated so as to be focused
on the disc reflective surface by the objective lens in the optical Power Voltage
pickup block. Therefore, when checking the laser diode emission, Indication
observe from more than 30 cm away from the objective lens.

UNLEADED SOLDER Model POWER VOLTAGE INDICATION

Boards requiring use of unleaded solder are printed with the lead- Canadian and Mexican AC 120 V, 60 Hz
free mark (LF) indicating the solder contains no lead. models
(Caution: Some printed circuit boards may not come printed with UK and Russian models AC 230 V, 50/60 Hz
the lead free mark due to their particular size)
Australian model AC 230 – 240 V, 50/60 Hz
: LEAD FREE MARK Argentina and Thai AC 220 V, 50/60 Hz
Unleaded solder has the following characteristics. models
• Unleaded solder melts at a temperature about 40 °C higher Korean model AC 220 V, 60 Hz
than ordinary solder. Taiwan model AC 120 V, 50/60 Hz
Ordinary soldering irons can be used but the iron tip has to be Singapore, Chilean and AC 110 – 120 or 220 – 240 V,
applied to the solder joint for a slightly longer time. Peruvian models 50/60 Hz
Soldering irons using a temperature regulator should be set to
Brazilian model AC 127 or 220 V, 50/60 Hz
about 350 °C.
Caution: The printed pattern (copper foil) may peel away if the
LASER DIODE AND FOCUS SEARCH OPERATION
heated tip is applied for too long, so be careful!
CHECK
• Strong viscosity
During normal operation of the equipment, emission of the laser
Unleaded solder is more viscous (sticky, less prone to flow)
diode is prohibited unless the upper lid is closed while turning on
than ordinary solder so use caution not to let solder bridges
the SW750. (push switch type)
occur such as on IC pins, etc.
The following checking method for the laser diode is operable.
• Usable with ordinary solder
• Method
It is best to use only unleaded solder but unleaded solder may
Emission of the laser diode is visually checked.
also be added to ordinary solder.
1. Open the upper lid.
2. Push the SW750 as shown in Fig.1.
Note: Do not push the detection lever strongly, or it may be bent or
damaged.
3. Check the object lens for confirming normal emission of the
laser diode. If not emitting, there is a trouble in the automatic
power control circuit or the optical pick-up.
In this operation, the object lens will move up and down 2
times along with inward motion for the focus search.

SW750

Fig. 1. Method to push the SW750

3
HCD-EH15
SECTION 2 This section is extracted
GENERAL from instruction manual.

Basic Operations

Adjusting the sound Listening to the radio

To adjust the volume 1 Select “FM” or “AM.”
Press VOLUME +/ (or turn the VOLUME control on Press TUNER/BAND  repeatedly.
the unit) . 2 Select the tuning mode.
To add a sound effect Press TUNING MODE  repeatedly until “AUTO”
appears.
To Press
3 Tune in the desired station.
Generate a more dynamic DSGX  on the unit.
Press +/ (or TUNING +/ on the unit) .
sound (Dynamic Sound
Scanning stops automatically when a station is tuned
Generator X-tra)
in. When you tune in a station that provides RDS
Set the sound effect EQ . services, the station name appears.
Tip
To stop automatic scanning, press  (stop) .

Playing a CD/MP3 disc To tune in a station with a weak signal

Press TUNING MODE  repeatedly until “MANUAL”
1 Select the CD function. appears, and then press +/ (or TUNING +/ on the
Press CD (or FUNCTION repeatedly) . unit)  repeatedly to tune in the desired station.
Open the tape
section lid. 2 Place a disc. To reduce static noise on a weak FM stereo
Press PUSH OPEN/CLOSE on the unit, and place a station
disc with the label side up on the CD compartment. Press FM MODE  repeatedly until “MONO” appears
To close the CD compartment, press PUSH OPEN/ to turn off stereo reception.
CLOSE on the unit.

PUSH OPEN/CLOSE
Playing a tape
Use buttons on the unit to play a tape.
1 Select the tape function.
Press FUNCTION  repeatedly.
2 Insert a tape.
Press  (stop/eject) , and insert the tape into the
cassette holder. Make sure there is no slack in the tape
to avoid damaging the tape or the tape deck.
3 Start playback. 3 Start playback.
Press  (play) (or CD/ (play/pause) on the unit) Press  (play) .
.
To Press
To Press
Pause playback  (pause) . To resume play, press
Pause playback  (pause) (or CD/ on the
it again.
unit) . To resume play, press
it again. Stop playback  (stop/eject) .
Stop playback  (stop) . Rewind or fast / (rewind/fast forward) .
This manual mainly explains operations using the forward*
Select a folder on an +/ (select folder) .
remote, but the same operations can also be performed * Be sure to press  (stop/eject)  after the tape has been wound
MP3 disc
using the buttons on the unit having the same or similar or rewound to the end.
names. Select a track or file / (go back/go forward)
(/ on the unit) . Note
Do not turn off the system during playback or recording.
Find a point in a Hold down / (rewind/
track or file fast forward)  during playback,
Before using the system and release it at the desired point.
Select Repeat Play REPEAT  repeatedly until Changing the display
To use the remote “REP” or “REP1” appears.
Slide and remove the battery compartment lid , and To change Press
insert the two R6 (size AA) batteries (not supplied),  Information on DISPLAY  repeatedly when the
side first, matching the polarities shown below. To change the play mode
the display1) system is on.
Press PLAY MODE  repeatedly while the player is
stopped. You can select normal play (“ ” for all MP3 Display mode DISPLAY  when the system is
files in the folder on the disc), shuffle play (“SHUF” or (Clock) off 2). The clock is displayed for eight
“ SHUF*”), or program play (“PGM”). seconds.
* When playing a CD-DA disc, (SHUF) Play performs the same 1)
operation as SHUF Play. For example, you can view CD/MP3 disc information, such as the
track or file number or folder name during normal play, or the total
Notes on Repeat Play play time while the player is stopped.
All tracks or files on a disc are played repeatedly up to five times. 2)
The STANDBY indicator  lights up when the system is turned off.
“REP1” indicates that a single track or file is repeated until you stop
it. Notes on the display information
The following are not displayed;
Notes on using the remote Notes on playing MP3 discs total playing time for a CD-DA disc depending on the play mode.
With normal use, the batteries should last for about six months. Do not save other types of tracks or files or unnecessary folders on a total playing time for an MP3 disc.
Do not mix an old battery with a new one or mix different types of disc that has MP3 files. remaining playing time for a track and an MP3 file.
batteries. Folders that have no MP3 files are skipped. The following are not displayed correctly;
If you do not use the remote for a long period of time, remove the MP3 files are played back in the order that they are recorded onto elapsed playing time of an MP3 file encoded using VBR (variable
batteries to avoid damage from battery leakage and corrosion. the disc. bit rate).
The system can only play MP3 files that have a file extension of folder and file names that do not follow either ISO9660 Level 1,
To set the clock “.MP3”. Level 2 or Joliet in the expansion format.
Use buttons on the remote to set the clock. If there are files on the disc that have the “.MP3” file extension, The following are displayed;
but that are not MP3 files, the unit may produce noise or may ID3 tag information for MP3 files when ID3 version 1 and
1 Turn on the system. malfunction. version 2 tags are used.
Press  (on/standby) . The maximum number of: up to 15 characters of ID3 tag information using uppercase letters
folders is 150 (including the root folder). (A to Z), numbers (0 to 9), and symbols (‘< > * + , – / @ [ \ ] _).
2 Select the clock set mode. MP3 files is 255.
Press CLOCK/TIMER SET . If the current mode MP3 files and folders that can be contained on a single disc is 256.
appears, press /  repeatedly to select folder levels (the tree structure of files) is 8.
Compatibility with all MP3 encoding/writing software, recording
“CLOCK,” and then press ENTER . Using optional audio components
device, and recording media cannot be guaranteed. Incompatible
3 Set the time. MP3 discs may produce noise or interrupted audio or may not play
at all.
Press /  repeatedly to set the hour, and To connect an optional headphones
then press ENTER . Use the same procedure to set Notes on playing multisession discs Connect headphones to the PHONES jack  on the
the minutes. If the disc begins with a CD-DA (or MP3) session, it is recognized unit.
as a CD-DA (or MP3) disc, and playback continues until another
The clock settings are lost when you disconnect the session is encountered. To connect an optional component
power cord or if a power failure occurs. A disc with a mixed CD format is recognized as a CD-DA (audio)
disc.
Connect additional audio source component to the
AUDIO IN jack  on the unit using an audio analog
cord (not supplied). Turn down the volume on the
Selecting a music source system, and then select the AUDIO IN function.

Press the following buttons (or press FUNCTION 

repeatedly).
To select Press
CD CD .
Tuner TUNER/BAND .
Tape FUNCTION 
repeatedly until “TAPE”
appears.
Component* (connected AUDIO IN .
using an audio cord)
* If the component has the AVLS (Automatic Volume Limiter System)
or BASS BOOST function, turn off the function to avoid distorted
sound from the speakers.

4
 HCD-EH15

Other Operations

Creating your own CD program Recording onto a tape

(Program Play) Use a TYPE I (normal) tape only.
Use buttons on the remote to create your own program. You can record just the portions you like from a sound
source, including connected audio components.
1 Press CD  to select the CD function.
Use buttons on the unit to control tape recording.
2 Press PLAY MODE  repeatedly until “PGM” appears
while the player is stopped. 1 Insert a recordable tape into the cassette holder
with the side you want to record facing forward.
3 Press /  repeatedly until the desired
track number appears. 2 Prepare the recording source.
When programming MP3 files, press +/  Select the desired source to record.
repeatedly to select the desired folder, and then select Place the disc you want to record.
the desired file. When recording a folder from an MP3 disc, press
Selected track or file number PLAY MODE  on the remote repeatedly to select
“ ,” and then press +/  repeatedly to select
the desired folder.
To record only your favorite CD tracks or MP3 files in
your desired order, perform steps 2 to 5 of “Creating
your own CD program.”
4 Press ENTER  to add the track or file to the 3 Start recording.
program.
Press  (record) , and then start playing the
5 Repeat steps 3 through 4 to program additional desired recording source.
tracks or files, up to a total of 15 tracks or files.
The CD starts playing automatically.
6 To play your program of tracks or files, press  . If there is noise while recording from the tuner,
The program remains available until you open the CD reposition the appropriate antenna to reduce the
compartment. To play it again, select the CD function, noise.
and then press  . While recording, you cannot listen to other sources.
To cancel Program Play, press PLAY MODE  To stop recording, press  .
repeatedly until “PGM” disappears while the player is
Tip
stopped. We recommend that you press   first, and then press   to
To delete the last track or file of the program, press avoid noise being recorded when you stop recording.
CLEAR  while the player is stopped.
To view program information, such as total track number
of the program, press DISPLAY  repeatedly. Using the Timers
The system offers two timer functions. If you use both
timers, the Sleep Timer has priority.
Presetting radio stations Use buttons on the remote to use the timer functions.
You can preset your favorite radio stations and tune Sleep Timer:
them in instantly by selecting the corresponding preset You can fall asleep to music. This function works even if
number. the clock is not set.
Use buttons on the remote to preset stations. Press SLEEP  repeatedly. If you select “AUTO,” the
1 Press TUNER/BAND  repeatedly to select “FM” or system automatically turns off after the current disc or
“AM.” tape stops or in 100 minutes.
2 Press TUNING MODE  repeatedly until “AUTO” If the tape deck is still playing or recording at the set
appears (or “MANUAL” appears, for a station with a time, the system turns off after the tape deck stops.
weak signal).
Play Timer:
3 Press +/  to tune in the desired station. You can wake up to CD or tuner at a preset time.
Scanning stops automatically when a station is tuned Make sure you have set the clock.
in, and then “TUNED” and “STEREO” (for stereo
programs) appear. 1 Prepare the sound source.
Prepare the sound source, and then press VOLUME
+/  to adjust the volume.
To start from a specific CD track or MP3 file, create
your own CD program.
If “TUNED” does not appear and the scanning does 2 Press CLOCK/TIMER SET .
not stop, press TUNING MODE  until “MANUAL”
appears, and then press +/  repeatedly to tune in 3 Press /  repeatedly to select “PLAY SET,”
the desired station. and then press ENTER .
“ON TIME” appears, and the hour indication flashes.
4 Press TUNER MEMORY .
Preset number
4 Set the time to start playing.
Press /  repeatedly to set the hour, and
then press ENTER .
The minute indication flashes. Use the procedure
above to set the minutes.
5 Use the same procedure as in step 4 to set the time
5 Press +/  repeatedly to select your desired to stop playing.
preset number.
If another station is already assigned to the selected 6 Select the sound source.
preset number, the station is replaced by the new Press /  repeatedly until the desired
stations. sound source appears, and then press ENTER . The
display shows the timer settings.
6 Press ENTER .
7 Press   to turn off the system.
7 Repeat steps 1 through 6 to store other stations.
The system turns on 15 seconds before the preset time.
You can preset up to 20 FM and 10 AM stations. The If the system is on at the preset time, the Play Timer
preset stations are retained for about half a day even will not play.
if you disconnect the power cord or if a power failure
occurs. To activate or check the timer again, press CLOCK/
TIMER SELECT , press /  repeatedly until
8 To call up a preset radio station, press TUNING “PLAY SEL” appears, and then press ENTER .
MODE  repeatedly until “PRESET” appears, and
then press +/  repeatedly to select the desired To cancel a timer, repeat the same procedure as above
preset number. until “OFF” appears, and then press ENTER .
To change the setting, start over from step 1.
To change the AM tuning interval from the factory
preset to 9 kHz (or 10 kHz, for some areas; this function Tip
The Play Timer setting remains as long as the setting is not canceled
is not available on European and Russian model), tune
manually.
in any AM station, and then turn off the system. Press
DISPLAY  to display the clock, and while hold down
TUNING +  on the unit, press   on the unit. All
the AM preset stations are erased. To reset the interval to
the factory preset, repeat the procedure.

5
HCD-EH15
SECTION 3
DISASSEMBLY
• This set can be disassembled in the order shown below.

3-1. DISASSEMBLY FLOW

SET

3-2. REAR CABINET BLOCK

(Page 6)

3-3. FRONT CABINET BLOCK,

TOP CABINET BLOCK,
MAIN BOARD
(Page 7)

3-4. MF-EH10 (TAPE MECHANISM DECK), 3-5. BASE UNIT BLOCK

CASSETTE LID (BU-K8BD90-WOD)
(Page 7) (Page 8)

3-6. OPTICAL PICK-UP BLOCK

(KSM-213CDP)
(Page 8)

Note: Follow the disassembly procedure in the numerical order given.

3-2. REAR CABINET BLOCK

 two screws
 screw (BVTP3 × 10)
(KTP2 3 × 8)

 two screws
(BVTP3 × 10)

 screw
(KTP2 3 × 8)


 rear cabinet block

 two screws
 connector (BVTP3 × 10)
(CN002)

6
 HCD-EH15

3-3. FRONT CABINET BLOCK, TOP CABINET BLOCK, MAIN BOARD

R top cabinet block

 two screws
 flexible flat cable (5 core) (FFC001) (BVTP2.6)
(except UK model),
flexible flat cable (7 core) (FFC001) claw
(UK model)
(CN106)

RB MAIN board
claw
 two connectors
(CNP501, CNP502)


 claw

 flexible flat cable (17 core)

(FFC002) (CN105)

 flexible flat cable (FFC003)

 connector (CN201)
(SW750)

 claw
 claw

slide switch (REC/PB) (SW501)

 front cabinet block REC lever 2.3 ± 0.4 mm

Note: Adjust so that the space of slide switch (REC/PB) (SW501)

REC lever becames 2.3 ± 0.4 mm.

3-4. MF-EH10 (TAPE MECHANISM DECK), CASSETTE LID

 lever (REC)  screw

 two screws
(BVTP2.6)
 screw
(BVTP2.6)

 PWB holder

RE cassette lid
 two screws
(BVTP2.6)

Note: When removing cassette lid,

it's possible to remove cassette
 RB MF-EH10
lid by the order of   RT RE. (tape mechanism deck)
R cable holder

 two screws
RT two claws

 Open the button cover (C).

 Push the eject button.

7
HCD-EH15

3-5. BASE UNIT BLOCK (BU-K8BD90-WOD)

Note: This illustration sees the top cabinet block back side from back.

 four screws  two vibration proof rubbers

(PWH B2.6) (green)

 base unit block

 two vibration proof rubbers
(BU-K8BD90-WOD)
(red)

 four claws


 CD cover

top cabinet block

3-6. OPTICAL PICK-UP BLOCK (KSM-213CDP)

 optical pick-up block

(KSM-213CDP)

 wire (flat type) (16 core)

(optical pick-up, CD board: CN301)

 CD board

 Remove the four solders.

8
 HCD-EH15
SECTION 4
TEST MODE
COLD RESET CD ERROR CODE
The cold reset clears all data including preset data stored in the The past errors of the optical pick-up system (= optical unit + CD
memory to initial conditions. Execute this mode when returning board) are displayed as the BD Errors as shown below.
the set to the customer. Procedure:
Procedure: 1. Press the [?/1] button to turn the power on.
1. Press three buttons of [x], [l m – TUNING] and [?/1] 2. Press the [FUNCTION] button to select CD function.
simultaneously. 3. Press three buttons of [l m – TUNING], [DSGX] and
2. When “RESET” appears, the set enters standby status. [?/1] simultaneously.
4. Then, the BD error code is displayed as “D0xxxxxx” (x means
PANEL TEST hexadecimal number) on the liquid crystal display as shown
Procedure: below.
1. Press the [?/1] button to turn the power on. 5. Every pressing of the [TUNING + M L] button in this
2. Press three buttons of [FUNCTION], [TUNER/BAND], and mode increments the number after “D” starting from “D0” up
[?/1] simultaneously. to “D4”, and then returns to “D0”. Every pressing of the [l
3. When the panel test is activated, [STANDBY] LED and seg- m – TUNING] button in this mode decrements the number
ments on the liquid crystal display are all turned on. after “D”. The smaller the error code number is, the newer the
4. Press the [CD u] button, date and version are displayed. For error content is.
example, “1115V002”. 6. To release from this mode, press the [?/1] button to turn the
5. Press the [TUNER/BAND] button, model name and destination power off.
are displayed. For example, “EH15ASIA”.
6. To release from this mode, press three buttons of [FUNCTION], Contents of “BD Errors”
[TUNER/BAND], and [?/1] simultaneously. Error display example
D 0 01 06 01
TUNER STEP CHANGE 1 2 3 4
(Except UK and Russian models)
The AM tuning interval can be changed over 9 kHz or 10 kHz. 1 It indicates the error history number
Procedure: 0 to 4: The error code number 0 indicates the newest error.
1. Press the [?/1] button to turn the power on.
2. Press the [TUNER/BAND] button to select TUNER (AM) 2 It indicates the error content
function. 01: The focus servo cannot lock-in.
3. Press the [?/1] button again to turn the power off (standby). 02: GFS is no good (NG).
4. After pressing the [DISPLAY] button on the remote command- 03: The startup time exceeds the specified period of time (time
er, while pressing the [TUNING + M L] button, press the over)
[?/1] button. 04: The focus servo is unlocked continuously.
5. It turns power on and display “9K STEP” or “10K STEP”, and 05: Q code cannot be obtained within the specified period of
thus the tuning interval is changed over. time.
06: The tracking servo cannot lock-in.
CD SERVICE MODE 07: Blank disc
This mode can move the SLED of the optical pick-up, and also can
turn the optical pick-up laser power on and off. 3 It indicates the on-going processing of optical pick-up system
Procedure: (= optical unit + CD board) when the trouble has occurred.
1. Press the [?/1] button to turn the power on. 01: The CD SHIP mode processing is in progress.
2. Press the [FUNCTION] button to select CD function. 02: The POWER OFF processing is in progress.
3. Press three buttons of [l m – TUNING], [FUNCTION], 03: The POWER ON processing is in progress.
and [?/1] simultaneously. 04: The INITIALIZE processing is in progress.
4. It enters the CD service mode and displays “SERVICE”. 05: The optical pick-up system (= optical unit + CD board) is
5. To release from this mode, press three buttons of [l m in the stop state.
– TUNING], [FUNCTION] and [?/1] simultaneously. 06: The STOP operation is in progress.
07: The startup processing is in progress.
Key Operation: 08: The TOC read-in processing is in progress.
[TUNING + M L], [l m – TUNING]: 09: The SEARCH operation is in progress.
Use these keys to move the SLED. When [TUNING 0A: The PLAY operation is in progress.
+ M L] is pressed in this mode, the SLED moves 0B: The PAUSE operation is in progress.
to outer circumference and the message “SLED 0C: The PLAY – MANUAL SEARCH operation is in prog-
OUT” is displayed. ress.
When [l m – TUNING] is pressed in this 0D: The PAUSE – MANUAL SEARCH operation is in prog-
mode, the SLED moves to inner circumference and ress.
the message “SLED IN” is displayed.
4 It indicates the operation that is being processed when the trou-
[FUNCTION]: ble has occurred.
Use this key to turn the optical pick-up laser power It indicates the step number of each processing specified by 3.
on and off. When the laser power is turned on, the Because the numbers of steps are different in each processing,
message “LD ON” is displayed. When the laser this number is different in each processing.
power is turned off, the message “LD OFF” is dis-
played.

9
HCD-EH15
SECTION 5 SECTION 6
MECHANICAL ADJUSTMENTS ELECTRICAL ADJUSTMENTS
PRECAUTION DECK SECTION 0 dB = 0.775 V
1. Clean the following parts with a denatured-alcohol-moistened
swab: 1. Demagnetize the record/playback head with a head
record/playback head pinch roller demagnetizer.
erase head rubber belts 2. Do not use a magnetized screwdriver for the adjustments.
capstan idlers
2. Demagnetize the record/playback head with a head demag- TEST TAPE
netizer. (Do not bring the head magnetizer close to the erase
Tape Signal Used for
head.)
3. Do not use a magnetized screwdriver for the adjustments. P-4-A063 6.3 kHz, –10 dB Azimuth Adjustment
4. After the adjustments, appiy suitable locking compound to the
parts adjusted. RECORD/PLAYBACK HEAD AZIMUTH ADJUSTMENT
5. The adjustments should be performed with the rated power Procedure:
supply voltage unless otherwise noted. 1. Mode: Playback
test tape MAIN board
TORQUE MEASUREMENT P-4-A063 PHONES jack
Mode Torque meter Meter reading (6.3 kHz, –10 dB) (J102) level meter
2.0 – 8.0 mN • m
FWD CQ-102AS (20 – 80 g • cm)
(0.28 – 1.12 oz • inch) set +
0.15 – 0.6 mN • m –
FWD
CQ-102C (1.5 – 6.0 g • cm)
Back Tension
(0.021 – 0.083 oz • inch)
5.0 – 17.7 mN • m
FF CQ-201AS (50 – 177 g • cm) 2. Turn the adjustment screw and check output peaks. If the peaks
(0.7 – 2.48 oz • inch) do not match for L-CH and R-CH, turn the adjustment screw
5.0 – 17.7 mN • m so that outputs match within 1dB of peak.
REW CQ-201B (50 – 177 g • cm)
(0.7 – 2.48 oz • inch)

TAPE TENSION MEASUREMENT within

L-CH 1 dB
Mode Torque meter Meter reading peak
within
more than 80 g Output 1 dB
FWD CQ-403A level
(more than 2.82 oz)

R-CH
peak
Screw Screw
position L-CH R-CH position
peak peak

3. Mode: Playback
test tape MAIN board
P-4-A063 PHONES jack oscilloscope
(6.3 kHz, –10 dB) (J102)

V H
set

waveform of oscilloscope

in phase 45° 90° 135° 180°

good wrong

4. After the adjustments, apply suitable locking compound to the

pats adjusted.

10
 HCD-EH15

Adjustment Location: Record/Playback/Erase Head • Repeat the procedures in each adjustment several times, and
Note: Remove the cassette lid before this adjustment. the tracking adjustments should be finally done by the trimmer
Refer to “DISASSEMBLY” (page 6) capacitors.
• Remove FM antenna in FM adjustment.

( ): UK and Russian models

AM VT VOLTAGE ADJUSTMENT
Adjustment Part Frequency Display Reading on Digital Voltmeter
L852 530 (531) kHz 1.5 ± 0.1 V
Confirmation 1710 (1602) kHz 8.0 (7.2) ± 0.5 V

( ): UK and Russian models

AM TRACKING ADJUSTMENT
Adjust for a maximum reading on level meter
L851 530 (531) kHz

FM VT VOLTAGE ADJUSTMENT
Adjustment Part Frequency Display Reading on Digital Voltmeter
L805 87.5 MHz 1.75 ± 0.1 V
Confirmation 108 MHz 6.2 ± 0.5 V

FM TRACKING ADJUSTMENT
TUNER SECTION 0 dB=1 µV
Adjust for a maximum reading on level meter
L804 98 MHz
[AM]
Setting:
Function: TUNER FM DETECTOR ADJUSTMENT
Band: AM Setting:
60 cm Function: TUNER
loop antenna B BAND button: FM
loop antenna A
AM RF signal FM RF Signal
generator generator MAIN board
JW403
(TUNER OUT L-ch)

set set
30% amplitude Carrier frequency : 98 MHz
modulation by Modulation : deviation by MAIN board
400 Hz signal FM 75 kHZ JW148 (GND)
Output level : 60 dB
[FM]
Setting: 1. Tune the set to 98 MHz.
Function: TUNER 2. Adjust L806 so that modulation distortion may become the
Band: FM best in the vicinity of the maximum value where the tuner out
MAIN board level becomes -156Bs or more.
JW403
(TUNER OUT L-ch)
FM RF signal MAIN board
generator CNP802 pin  level meter

+
set
–
1 kHz frequency
deviation by FM 75 kHz MAIN board MAIN board
signal CNP802 pin  JW148
Output level: (GND)
as low as possible

digital voltmeter
MAIN board
10 k Ω
JW821 (VT)
JW805 (GND)

11
HCD-EH15

Adjustment Location: CD SECTION

– MAIN Board (Component Side) –
Note:
1. CD Block is basically constructed to operate without adjustment.
L852 2. Use YEDS-18 disc (3-702-101-01) unless otherwise indicated.
AM VT 3. Use an oscilloscope with more than 10 MΩ impedance.
L805 Voltage 4. Clean the object lens by an applicator with neutral detergent when the
FM VT Adjustment signal level is low than specified value with the following checks.
Voltage 5. Check the focus bias check when optical pick-up block is replaced.
Adjustment
L851
L806 AM Tracking FOCUS BIAS CHECK
FM Detector Adjustment oscilloscope
Adjustment (DC range)

CD board
TP122 (RFEQO) +
TP124 (VC) –

L804
FM Tracking Procedure:
Adjustment 1. Connect oscilloscope to TP122 (RFEQO) and TP124 (VC) on
the CD board.
– MAIN Board (Conductor Side) – 2. Press the [?/1] button to turn the power on.
3. Set the disc (YEDS-18) and press the [CD u] button to play-
back.
CNP802
1
4. Confirm that oscilloscope waveform is as shown in the figure
3 JW403 below. (eye pattern)
JW805
(TUNER OUT L-ch) A good eye pattern means that the diamond shape (◊) in the
(GND) center of the waveform can be clearly distinguished.
VOLT/DIV: 200 mV
JW821 TIME/DIV: 500 ns
(VT)
JW148
(GND) level:
JW402 1.2 ± 0.3 Vp-p
(TUNER OUT R-ch)

Checking Location:
FM TUNE LEVEL CHECK – CD Board (Conductor Side) –

signal
generator
set

Procedure:
1. Turn on the set. TP124
2. Input the following signal from signal generator to FM antenna (VC)
input directly.

Carrier frequency : A = 87.5 MHz, B = 98 MHz, C = 108 MHz

Deviation : 75 kHz
Modulation : 1 kHz TP122
ANT input : 35 dBu (EMF) (RFEQO) IC101

Note: Use 75 ohm coaxial cable to connect signal generator and the set.
You cannot use video cable for checking.
Use signal generator whose output impedance is 75 ohm.

3. Set to FM tuner function and tune A, B and C signals.

4. Confirm “TUNED” is lit on the display for A, B and C sig-
nals.

When the selected station signal is received in good condition,

“TUNED” is displayed.

12
 HCD-EH15
SECTION 7 Ver. 1.1
DIAGRAMS
THIS NOTE IS COMMON FOR PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAMS. • Circuit Board Location
(In addition to this, the necessary note is printed in each block.)
CD board
For Printed Wiring Boards. For Schematic Diagrams. MAIN board
Note: Note:
• X : Parts extracted from the component side. • All capacitors are in μF unless otherwise noted. (p: pF) 50
• Y : parts extracted from the conductor side. WV or less are not indicated except for electrolytics and
• W : indicates side identified with part number. tantalums.
• f : internal component. • All resistors are in Ω and 1/4 W or less unless otherwise
• : Pattern from the side which enables seeing. specified.
(The other layers' patterns are not indicated.) • f : internal component. VOLTAGE-SEL board
• C : panel designation. (Chilean, Peruvian, Brazilian
Caution:
Pattern face side: Parts on the pattern face side seen from Note: Note: and Singapore models)
(Conductor Side) the pattern face are indicated. The components identi- Les composants identifiés
Parts face side: Parts on the parts face side seen from fied by mark 0 or dotted par une marque 0 sont
(Component Side) the parts face are indicated. line with mark 0 are criti- critiques pour la sécurité.
cal for safety. Ne les remplacer que par PT-AC board
• Indication of transistor. Replace only with part une piéce portant le nu-
number specified. méro spécifié.
C
• A : B+ Line.
Q These are omitted. • H : adjustment for repair.
B E • Voltages and waveforms are dc with respect to ground
under no-signal (detuned) conditions.
– CD Board –
no mark : CD PLAY
Q – Other Section –
no mark : FM PANEL board
B C E [ ] : AM
( ): CD PLAY
These are omitted. < > : TAPE PLAY
{ }: REC
• Voltages are taken with VOM (Input impedance 10 MΩ).
Voltage variations may be noted due to normal production
tolerances.
• Waveforms are taken with a oscilloscope. • Waveforms
Voltage variations may be noted due to normal production – CD Board – – MAIN Board – – PANEL Board –
tolerances.
IC101 JB (RFi) IC801 X (XOUT) IC701 RG (X3)
• Circled numbers refer to waveforms.  (CD play mode)
RB XB
• Signal path.
F : FM
f : AM
J : CD PLAY
E : TAPE PLAY
: REC
1.2 Vp-p 3 Vp-p
h : AUDIO IN
0.5 to 1.3 Vp-p 13.4 μs 30.8 μs
• Abbreviation
AR : Argentina model 200 mV/DIV, 500 ns/DIV 1 V/DIV, 10 μs/DIV 2 V/DIV, 20 μs/DIV
AUS : Australian model
BR : Brazilian model
IC101 XG (XO) IC861 RG (XOUT) IC701 PT (X1)
CND : Canadian model  RT XT
E51 : Chilean and Peruvian model (CD play mode)
KR : Korean model
MX : Mexican model
RU : Russian model
SP : Singapore model
TH : Thai model 5 Vp-p 3.4 Vp-p
TW : Taiwan model 3.3 Vp-p
230 ns 182 ns
59.1 ns
1 V/DIV, 20 ns/DIV 2 V/DIV, 100 ns/DIV 2 V/DIV, 100 ns/DIV

Q507 (Collector)
RE (Tape REC mode)

9.8 Vp-p
14.6 Ms
5 V/DIV, 10 Ms/DIV

HCD-EH15
13 13
HCD-EH15

7-1. PRINTED WIRING BOARD - CD Board - • See page 13 for Circuit Boards Location. • : Uses unleaded solder.

1 2 3 4 5 6 7 8 9

CD BOARD (CONDUCTOR SIDE)

A

CD BOARD (COMPONENT SIDE)

M M401
(SPINDLE)

R405
S201
(LIMIT)

C401
B

C405
C404 C403

R402

C125
TP124 28 22 IC401 21 15
M402

C124
(VC) (SLED)
C122
R139
M

R136
R140
C123

C136
C

R129
R142

R118
R135 1 7 8 14
R126

R120
R134
R130

R128
R143 R127

R151
R415

C138

C137
R125 C153

R408
R414

C140

C139

C107
C108
C141 C112 R114

C142
TP122

C100
R212 75 51
(RFEQO) R144 R113

C143
R211

C146 76 50
R112

C145
C144 1
C105 R210
IC101

R110
C148

C110
D

C147
C133

R111 R209
C149
C104 R218 R208

C106
IC201

C109
R219 R207
C207 C115
R146 R145 R153 R220 R206
R147 R221

CN201
A
C206

26 R205

R154
1 5 R155
R148 R149 100 R222
C201

R204

C116
3 4 R150 1 PANEL
C150 25 R223

C102
R104

C101
C120
R203

C119
BOARD

C118

C117
C205

C306
C113 CNP701
R201 C132 (Page 16)

C152 C151
C130 R157
C103 R106
R101
X102

R156

R105
C126 21
E C202 R303 C127 R102
R302

C128 R108
11
R304

C301
R202
C204

(11)
C309

1-872-135-
Q301

C307

R301

C303
1 16
CN301

C302
11
F OPTICAL PICK-UP BLOCK
(KSM-213CDP)
1-872-135-
(11)

HCD-EH15
14 14
 HCD-EH15

7-2. SCHEMATIC DIAGRAM - CD Board - • See page 13 for Waveforms. • See Page 21 for IC Block Diagrams. • See Page 24 for IC Pin Function Description.

R127
0

C107 R126 0
C136
0.1 47p

R125
R142 R139 R129 0
22k 47k 1k

470k
Q301
R143 C112 R120 C153 C108
2SA2119K 47k
R140 R134 R130
0.1 0.1
R114
0.1

R128
CN301 0 1M 4.7k 0 10k
C301 AUTOMATIC POWER
16P
0.1 CONTROL
R136 R135
22k 470k

R118

470p
100k
R303 C306 R301
2.2 100 C307 100k
CN201

C138
10V 1
C302 C303 21P
OPTICAL 10 10
R304
2.2 C137
0.01
PICK-UP R212 R211 100
BLOCK
(KSM-213CDP)
R302
0 1 100

C100
0.1
C309 C139 0.01
0.001
C106 C140 0.01
100
10V TP122 (RFEQO) R113 10k R210 100

C141 0.0022 R209 100

A
C142 0.1 R218 100k R208 100
M401 C105 TP124 (VC) R219 100k R207 100
(SPINDLE) 0.1 R144 22k R220 100k R206 100 PANEL
C143 0.01

M SP- C144
0.1 IC101 R221 100k R205 100 BOARD
C146 470p
CD-MP3 PROCESSOR
R222 100k R204 100 CNP701
(Page 17)
C145 0.01
C148 C133 0.1 R223 100k R203 100
SP+
47p C147 0.1 IC101
R112 100
M402 C149 22p
TC94A70FG-006 (D, HZ
R111 100
(SLED) C104
0.1 R110 10k IC B/D
M SL+ C110 0.1

C207
SL- 1
R145 0
C206
1
R146 0
R153
R147 0 1M R157 100
C115 C151 470p
R148 0 R155 47 R156 100
22
6.3V C152 470p
R149 0
C116 0.1
C150 0.001 C201 C205
100 0.1
IC201
R154 1M R108 0 10V TK63115SCL-G@GT
R150 C109
0 0.1

2 IC201
R201
0

+1.5V REGULATOR R202

0

C202
C204
100
C117 0.1

0
10V

1k
220
0.022 R105 1M

R151
C119

R106
0.022

R101
C118
0.01 X102
16.9344MHz

C102 0.1
C120

C128 5p

C130 5p
0.01

0.0022
C127
C124 0.0047
R405
10k C132 0.1

C123

0.1
R402 470p
2.2k

C126
R104
C404 C122 0
S201

0.1
C405 C403

C125 0.0047
0.1 470p (LIMIT)
0.1 0.1

C113
R102
C103 10k
0.1

C101 0.1

IC401
FOCUS/TRACKING COIL DRIVE,
SLED/SPINDLE MOTOR DRIVE
IC401
BA5826SFP-E2

IC B/D R408
2.2k
SP-
R414
SP+ 4.7k

SL+ R415
C401
220
47k
10V

SL-

HCD-EH15
15 15
HCD-EH15
Ver. 1.1

7-3. PRINTED WIRING BOARD - PANEL Board - • See page 13 for Circuit Boards Location. • : Uses unleaded solder.

• Semiconductor 1 2 3 4 5 6 7 8 9
Location
Ref. No. Location
D701 B-7
D702 B-7 PANEL BOARD
D801 G-2 A SW750
D804 F-2 CD LID
OPEN/CLOSE
DETECT
IC701 C-4
IC703 C-2
2 1
CNA750 JW735
LED701 B-2 LCD702
LIQUID CRYSTAL DISPLAY
LED702 D-8 R759 36 1
R775
Q701 B-7

R753
Q702 C-8
B E JW713 JR763 JW762
JW726
E JW714

L702

Q701
Q707 K
Q703 C-7 C728

D702
A
LED701 K
Q704 C-7 R723
JW715

R766
(LCD BACK LIGHT)
K
Q705 C-7

C731
JW733

X702
IC703

D701
Q706 C-7 R767

C702
C716

C727

Q704
Q707 B-2 R732 E C719
A

C725
Q713 C-6 JR762 IC701 JW719
R721
Q714 C-6

Q705
JW736 R719

C701
JR789 R772

R713

R779
E

R714
3 1 R757 C726 JW790
C

Q702
R718
R785
E

JR710

R737
R736

Q706
Q714
C710 E

R768

JR760
JW718
E JW720
JR719 E
R727 C711

Q703
R728
JW721 JW765 E JW728
R777

Q713
R799
R784

C707

C704
JW780 JR756 JW730

JR714
X701

JR750
C732
R787 R798 JR713
R750

JW729
JR788
CND, UK,
C722

C733

R783
JR704

R771
E51, MX, BR,

R755

C706
R782

JR709
R770 AR, AUS, RU R781

D (EXCEPT UK)

SW704
JW712 – + TUNING –

C721
DSGX SW711 SW707 JW761 SW703 JW741
JW703 -
.
TUNING +
JW781 R742 C712
SW706 .
-
R747

C729
JW724 JR751 JW731
LED702

JR748
JW722

L701
R744
JW782 STANDBY

R738
JR775

R748
C723
JW717

R793
R745

R754

R733

JW727
JW756

JW775
JW704 JW716 JW732 R701

JW763
JW770
JR743
SW710 JW710 JW740 JW752

JR706

JR723

R739
JW750 JR752

JR708
R762
R746 R792 JR744 R743
Y R704

E JR705 SW708 FUNCTION R741 SW701

JW767
SW702
CD
V SW705

R791
JW739
R765

R751
JR747

JW707 R789
JW747
TUNER/ R790

JR707
JW783 BAND
R734

JW748
JW746
JW755

JW745
JW711 R788
R707

R705
R703

JW737
R709

JW723
JR722

JW742

JW749
CD BOARD 21 1
CN201 CNP701 R722 R740
R720
(Page 14) JW725
20 2
R774
F
R702
R708
R710
R749

R706

R711

R760
R761
JR757 R730
JW700

CNP706
CNP703 C
D804

R763

JR755
MAIN
JW708 B
JR749

(UK) BOARD
CN105
C (Page 20)
C724

JW776

JW772
SW701 – 708
A
SW710, 711
R764

G
D801

SW700
ROTARY ENCODER
VOLUME
JW773

13, 14, 15
1-876-656- (13, 14, 15)

H MAIN
BOARD B
CN106
(Page 20)

HCD-EH15
16 16
 HCD-EH15
Ver. 1.1
7-4. SCHEMATIC DIAGRAM - PANEL Board - • See page 13 for Waveforms. • See Page 24 for IC Pin Function Description.

Q701-703
REGULATOR R767
D702 220k
Q701
ISA1235AC1TP MC2836-T11
R775 D701
-1EF L702 0
47 UDZW-TE17-
X702 5.53MHz
C704

R772 22k
470
C727 C728 C731
Q714 4V R759
R799 47p 47p 0.1
R779 C726 R719 ISA1235AC1TP 100
220k R713 100k
0.01 1k -1EF
10k

R721 470
R798
Q713 47k
Q703 Q713,714
Q702 2SC3052F-T RT1N441C-T B+ SWITCH
2SC3052F-T

470
10k

R723
Q704

R785
C702 RT1N441C-T
C725 0.01 RESET
C701 R718
100 SWITCH
0.1 1k
6.3V
R753
C711 100
0.1

R766
10

VCC
VSS
X0

X1
SEG31

SEG30

SEG29

SEG28

SEG27

SEG26

SEG25

SEG24

SEG23

SEG22

SEG21

SEG20

SEG19

SEG18

SEG17

SEG16
LCD702
LED SEG15 LIQUID
2 CRYSTAL
CD OPEN/CLOSE SEG14
R784 R703 1k DISPLAY
100k 3
REQ SEG13
Q705 Q706 R704 1k

10k
4
2SC3052F-T 2SC3052F-T SEG12

0
MMUT
5 R705 1k

R728

L701
Q705,706 BUS0 SEG11
VOLTAGE DETECT 6 R706 1k
BUS1 SEG10
7 R707 1k
BUS2 SEG9
CNP706
C707 8 R708 1k
17P
0.001 BUS3 SEG8

CD_L RMC SEG7

10 R709 1k
CD_R BUCK SEG6
11 R710 1k

18p
AGND CCEN SEG5
12 R711 1k
SWG4

C732
CD_DVDD 3.3V XRST
X701 32.768KHz
MGND X2 SEG3
R755 100k

22p
MGND X3 SEG2
IC701

0.1
9V VCC MB90F830PF-GE1 VSS

C733
C706 0.1 SYSTEM CONTROLLER

C716
9V VSS VCC
R701
CD_AVDD 3.3V 470 NC SEG1
23
CD_ON NC SEG0
33
FUNC_SDA LED702 NC COM3
34 1L4345V22DOTDT02
AMP_ON NC COM2
(Page 19) P-MONITER
36 STANDBY R734
1k
NC COM1
LED701
SELU2B10A-SLF62
40
TP_STATE LED_STBY COM0 (LCD BACK LIGHT)
46 23 R774 1k
POWER_ON CD_ON V3
∗ R781 R789 1k 57
DGND R720 NC TU_DI
0 (UK)
25 1k R790 1k 56
R714
VSTBY 220 (RU) TU_DO TU_CLK 10k
26 R791 1k 55
470 (E51,MX,AR) RDS_DATA TU_CE
CNP703 1K (CND,BR)
R722
4.7K (AUS) NC RESET
5P (EXCEPT UK) 1k C719 0.047
(UK)
7P (UK) NC MD0 Q707
45 R736 2SC3052F-T
1N4002-B5

(CND,UK,E51,MX,BR,AR,AUS,RU) MD1

POWER_ON
RDS_SC NC 1k LED DRIVE

FUNC_SDA

TP_STATE
26

RDS_CLK
NC MD2

AMP_ON
RDS_SD

TU_ASD

RE_VOL
P_MONI
R781
57 ∗ R792 R727

SUFIX
HOLD
AVCC

SBSY
AVSS
10k 1k

KEY1

KEY2

KEY0
TU_DI

VSS
56 SW750

NC

NC

NC
D801

TU_CK R782 CD LID

55 ∗ R757
TU_CE R783 R793 100k OPEN/CLOSE
39 10k
0 DETECT
TU_ANSD CNA750
25 2P
C712
TU_DO (EXCEPT UK)
(Page 19) 0.1

4.7k
1k

4.7k
∗ R782

R740

1k

1k

1k
C724
0 (SP,TW,KR,TH)

4.7k
R702
0.0047

R747

R749

R751

R788
4.7K (CND,E51,MX,BR,AR,AUS,RU) REMOTE CONTROL

R741
CNP701 R730 RECEIVER IC703
21P NJL24H400A
1k

ZDET 33 34 36 39 40 43 45 46

2
R768
4 47 C710
M_MUTE 1
R771 R777
MGND 39k 47

VM(7V) R787 47k R738 R739 R754

10k 10k 10k
1N4002-B5

DVDD(3.3V)
D804

C729 C723 R748 47k R732 47k

0.001
D_OUT 0.001
C721 R770 47k
0.001
DGND R733 47k
C722
43 0.001
SBSY R750 R762 R743
3 2.2k 2.2k 1k
REQ
R763 R761
11 22k 47k
CCE

100k
22k
10
BUCK
(Page 8

R764
BUS3

R760
15) BUS2
7
SW705 SW704 SW703 SW702 SW701

CD TUNER/
6 TUNING
BUS1 - +
SW700 BAND
5 ROTARY
BUS0
12 ENCODER
RST
VOLUME R745 R765 R746 R744 R742
AGND 10k 4.7k 2.2k 2.2k 1k

LOUT

DAC_GND
SW711 SW710 SW708 SW707 SW706
ROUT
DSGX FUNCTION + -
AVDD(3.3V)

HCD-EH15
17 17
 HCD-EH15
Ver. 1.1

7-5. SCHEMATIC DIAGRAM - MAIN Section (1/2) - • See page 13 for Waveforms. • See Page 21 for IC Block Diagrams.

(UK) R857
(1/2) L852
AM VT VOLTAGE
47k
JW837
L851 R856
AM TRACKING D851 47k
SVC347A C854 C855 L852
C852 10p 470p
AM OSC X861 4.332MHz
10p R871

10k
C868
D813 220k
68p C869
MC2837
47p

R867
CNP802 C851 R873
C853
3P 0.047 2.2k
0.022 JR861
L851
ANTENNA R811 R812 R839 R814 0
FM/AM AM RF R851 R853 100k C856 5p 4.7k 470 100 100 C862
0.1
22k
JW805 R805 C841 C834
R809 JW121 C816
(GND) 100k R808 22 220
1k (VT) 0.22
D812 BPF801 10k D803 R807 50V 10V
MC2837 SVC230 100k
R804
0 (EXCEPT UK,RU)
C843

C807
0.0022
R863

100p
C817 220p
D802 C809 0.1 22k
SVC230 0.1
C804 R850 R813 R861 C864

C815
C822
0.1 2.2k 10k 10k 470p
470p
C820 C819
0.001 0.001
R815 Q801

R849
C840

22k
4.7k R817 0.47 2SC3052F
L805 C806 L805 10k REGULATOR Q861
L804 R827

0.047
0.001 2SC3052F

MC2837
FM VT FM RF R806 R816 10k 100

D815
0 R802 DET AMP
R803
VOLTAGE 10
10

C821
C823
18p
C803 R818
47k C838 0.1
C800 0.01
JR801 R801 2.2k
0.1 0
C866
R830 47k
C818 C802 R842 470p
0 0.1 47k
L804 R829 100k
X801 C861 R874
FM TRACKING 75KHz R864 10k 0.1 100k
R843 C867
470k 470p
C824
18p
R870 R869 C865 C863 R875
470k 10k 22 22 IC861 100k
50V 50 PT2579SN

Q802
IC801
2SC3052F
FM/AM TUNER, LV23003VA R844
REGULATOR
10 RDS RECODER
FM/AM PLL

R845 Q862
22 2SC3052F
C839 R841 REGULATOR
0.1 100
1M

R847
RDS-CLK
22
R810

C825 R872
C810 C801 RDS-DO
1 220
0.22 100
16V
R868 10k
JR802

C873

R848
0

2p

1k

C811 0.1 C826 R866 R876 47k

100p R835 10k
4.7k
CF801 C814 R826 (EXCEPT UK,RU)
10k

10k

C813 R820
C828

C827
100p

100p
R822 2.2k

0.1 100 220 R819 10k TU-ANSD

CF802 1000P 47k
JR803 10V
R833

R836

0 R821 TU-DO
220
CF802
TU-CLK
R823
C832 0.47

TU-DI
R824 100
2.2k
(UK,RU) TU-CE
∗ C847,848 0.01 (CND)
0.0047 (EXCEPT CND) VM9V
R825 R834 R846
(Page 19)
Q803 TU-L
470 22k 2.2k
2SC5477 C831 R840 L806 C847 ∗
R831 C833 0.47 22k C829 C830 C848 TU-GND
FM MIX AMP 0.47 FM DET 0.01 0.01 ∗
220 C835 0.22 R837 1k
R859 ∗
C836 0.22 R838 1k JW403 (TUNER OUT L-ch)
R828 C812 L803 CF803 L806
0.1 TU-R
22 (UK,RU) AM IF FM DETECTOR JW402 (TUNER OUT R-ch)
R860 ∗ R859,860 1K (UK,RU)
47 (EXCEPT UK,RU) JW418 (GND) ∗
22K (EXCEPT UK,RU)
EMC-GND

Note: Refer to supplement-1 for MAIN board (Brazilian, Thai models).

HCD-EH15
18 18
 HCD-EH15
Ver. 1.1

7-6. SCHEMATIC DIAGRAM - MAIN Section (2/2) - • See page 13 for Waveforms. • See Page 21 for IC Block Diagrams.

Q194 Q192
KTA1271Y-A VOLTAGE DETECT R197 KTC3203Y-A
(2/2) 100 REGULATOR
FB101

CNP501
R188 Q193 IC101 R185 100 4P
22k ISA1235AC1TP TK70540SCL
-1EF R198 100 Q191
AC DETECT KTC3203Y-A TPR501
Q194,195 R177 R186 100
B+ SWITCH 100k REGULATOR (REC/PB)
R199 100

CONT
VIN VOUT
FB102
Q195
GND NP R187 100
2SC3052F-T
R-CH
IC301 R179 R189 C543
C189
LA4631-E 10k 22k 0.1 0.001
P0WER AMP
R192
100k R196 R195 R505 R507 C507 L-CH
C192 R513 R515
100 100 10k 2.2k 0.01
0.1 100 47

NC

NC
R178 C197 R503

NC
C190 C193 CNP502
10k 0.1 4.7k
10 50V 0.1 C199 220 10V 3P
C198 C503 C505 C509
0.047 SW501
CD_ON C191 0.1 0.1 470p 33
16V (REC/PB)
TAPE
R511 R509 R517 REC

FUSD
2.2M 470k 100k MECHANISM
R406 C403 C515 C407 C408 R519 DECK
0.1 47p 0.0047 0.0047 33k
1k C531 0.001 PB
C532 (MF-EH10)

0.001
0.001
INPUT 0.001 C513 -1
R410
0.001
C307 SELECTOR, 100k

0.22

0.22
1000 C308 C310 R502 C511

C315
C302
ELECTRICAL C501
16V 1000 0.001 C421 100 470p
R412 220 C502 47p
VOLUME 0.1
16V 47p CN106

C404

C406
R302 R308 D193 C512 5P (EXCEPT UK)
R340 R339 MC2838-T11 470p
22k 22k R541
C371 0.1 100 100 7P (UK)
R411 R501 C514 22k (UK)

220
1k 100 0.001

0.1
C301 RDSC

1 50V
0.0022 R520 RDS_SC

R404
33k

C535
RDSC C305 RDSD

2.2k

2.2k
R371 R373 R375 R377 R379 R301 R307 R512 -2
RDS-CLK 1 1 1 1 1 R365 1 22k 22k 2.2M RDS_SD
RDSD 2.2k
R518

C306
RDS-DO 50V TUDI

R303

R304
100k TU_DI
TUAS C504 TUCK
C309
TU-ANSD 470p C510 TU_CK
0.001 33
TUDO C506 R510 TUCE
TU-DO 16V TU_CE
0.047 470k

470p

4.7k

4.7k
TUDI IC401 TUAS
TU-DI TU_ANSD
TUCK BD3881FV R514 R516 TUDO
(Page 17)
R372 R374 R376 R378 R380 R403 R504 R506 R508 C508

R305

R306
C311

JW107
TU-CLK C304 100 47 TU_DO
1 1 1 1 1 1k 4.7k 10k 2.2k 0.01
TUCE 100 C312
TU-CE C544 C518
16V 470p
0.001 0.1

C303
4.7 C528 0.001
50V C519
0.1 R532 R534

(Page 18) VM9V

R530
2.2k
4.7k 10k

R531 4.7k R533 10k

AUX-R
AUX-L
TU-L

CD-R
TU-R

CD-L
TU-L
TU-GND

0.1
C401 C527 0.001
TU-R 0.1 R529

470p

470p
4.7k

4.7k
4.7k

4.7k

4.7k
C410 2.2k

C409
50V

22k
0.1 C525 C526

C522

C529
100p

100p
0.01 0.01

TPST
R426
C437

R429
R430

C438
R439

R440
R424 R535 R536 R545

R522
EMC-GND R425 C405 Q507

4.7k
4.7k 220 220 4.7k
4.7k 0.1 2SC3052F-T L501
50V OSC BIAS OSC
R521

R528
22k R561 C561 R560 R542 R544
22k 0.0022 1k 10k 4.7k CN105
R423 R527
R402 17P
4.7k 4.7k
R113 C187 C381 100 C564
JW181 CD_L
4.7k 4.7k 0.001 0.01 CD_L
Q371 C402 C412 C413 R405 C524 R526 R524 R523 R525 C523 CD_R
ISA1235AC1TP C533 CD_R
Q351 100 100 100 0 0.01 10k 4.7k 4.7k 10k 0.01
L 2SJ599 -1EF 16V 0.1 16V 16V R433
C415 AGND
-ZK-E1-AZ 22k
0.1
J101 C183 0.1 R355 R381 C567
R181 10k 10k 0.0047 CD_DVDD 3.3V
D371 C534 R564 C565
SPEAKER 10 R382 R427 R543
C181 0.1 Q352 MC2838-T11 10k 100k 0.1 4.7 1 4.7k MGND
2SC3052F-T
C182 0.1 C184 0.1 R182 S R383 MGND
10 10k C431
R R354 C562 R565 R419

470p
R441 1 9V
R351 10k 47k 0.0022 4.7 33k 50V
10k R434 CD_L
R114 C188 9V
JW182 22k

C433
4.7k 4.7k R442 47k R420 33k C432 1 50V CD_R
D372 C434 CD_AVDD 3.3V
Q372 MC2838-T11 FB103 470p CD_ON
2SC3052F-T CD_ON
FUSD
R356 R352 R353 R384 C382 FUNC_SDA
(CND)
22k 2.2k 10k 1k 0.01
JW137 2.2 AMP_ON

Q351,352 Q371,372 P-MONITER (Page

17)
R118 220 TPST
B+ SWITCH AC DETECT JW137 TP_STATE
R116 220
POWER_ON
R117 220
JW166
R R112 DGND
J102 470k (EXCEPT CND)
R115 220
PHONES VSTBY
L

C142 C141 R120 R119 R111

470k
0.01 0.01 2.2k 2.2k
C194 C196
(UK,RU,KR) 0.1 0.1
(E51,BR,SP) D131 R151
10k
C111 L103 C105 MC2836-T11 R175 100k
C101 J105
0.1 3300 0.1 (UK,RU)
35V AUDIO IN
0.47 (KR)
C118
Q101-103 L104
100 10μH
S202 +9V 16V R176 100k
C416 R428
VOLTAGE REGULATOR 0.1 100k R152 10k C115
D107 D108 0.1
SELECTOR
RL202-B322-1 RL202-B322-1
110-120V 127V
PT005 EXCEPT Q101
D110 2SB1565E R123
POWER E51,SP
RL202-B322-1 470k
W008 TRANSFORMER R109
220-240V 220V
100k
470
D109 Q123
CN002 3P

JW169

(E51,SP) (BR) RL202-B322-1 2SC3052F-T R121

F002 (CHASSIS) C156 220k
1N4002-B5
CNA102

R104

T160mAL F001 0.1 R108 D106 R103 DC DETECT

D112
GND 3P

47k
250V 100 UDZW-TE17-
4
D111 1N4002-B5 Q102
2SC3052F-T R101

VOLTAGE
∗ Q122
T160mAL 250V C155 10k
100k

100k

2SC3052F-T
0.1 Q121
JW170

(UK,AR,KR,TH,AUS,RU) 3 VMAC

-SEL
2SC3052F-T AC DETECT
1N4002-B5

T315mAL 250V 5 C109

R105
R110
D114

VMAC AC DETECT
(AC IN) 0.01

BOARD
(CND,E51,MX,BR,SP,TW) 2 6 Q103 R124
T002 C113 2SC3052F-T C110
D113 100
7 2200 0.22
1N4002-B5 35V
1 8 C122
(E51,SP)

T001 R107 220

JW002 R102
(EXCEPT E51,BR,SP) 470 10V
R126 100
47k
∗ NOT REPLACEABLE: R106 C114 R125 C121
BUILT IN TRANSFORMER R128 220 R129 220 R131 220 18k 0.1 4.7k 0.47
R127
R130
47k 220

Note: Refer to supplement-1 for MAIN board (Brazilian, Thai models).

HCD-EH15
19 19
HCD-EH15
Ver. 1.1

7-7. PRINTED WIRING BOARDS - MAIN Section - • See page 13 for Circuit Boards Location. • : Uses unleaded solder.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 • Semiconductor
Location
CF802
(UK, RU) (EXCEPT UK, RU)
Ref. No. Location
A BPF801 CF801, 803

D106 L-4
B. P. F.
D107 K-3
D108 K-3
D109 K-4
(UK) D110 J-4
D111 K-5
B E

D112 L-3

JW207
Q194 E C190
PANEL R189

Q193
B

FB103
BOARD R177

D113 K-5

R178
CN106
CNP703 JW210 R188

C198
(Page 16) E

C193
Q195

C191
A
D114 K-3

D193
K C199 R199

JW220
JW211
A

JW206
C197
JW209
JW212 R196 D131 I-4

Q191
C189
R179 R198

MAIN BOARD JW213 D193 B-9

JW208
R867

R874

R875
3 1
IC101 4

R857
5
D371 L-6
(US) FB102

E
JW205 JW214 R197
R856 R864
R876

X861
C D372 J-6

R192
JW204
R866 R187

R195
R868
R873
D802 D-5
L803

Q192
Q862
C867 Q861
C196 JW215 FB101
E R186
E
D803 F-6

C861

C192
R872
C868
C812

IC861

E
R869
R871 JW216 R185
D812 D-2
CF803

BPF801
R870

C862

C869
C863 (EXCEPT CND)
D813 D-2

C865
K C866
D812

A/K C864 PANEL

CNP802
C

JW203
A 1 BOARD
D815 F-6

JW836
JR861
C818

ANTENNA R861 CNP706

CNP502
FM/AM
(Page 16)

C194

JW137

JW137
JW812
D JR802
JW840
3 D851 E-5
R831

C804 C432
K

CN105
E
D813

A/K R825 R810 (CND)

R804 JW124
A
Q803 C828
JW809

JW217
R854

IC101 C-11
A JW837
JW811

JW125

D802

JW163

JW164
L804 K C827
JW810

R828 A JW218
C803 R803
IC301 L-6

R176
CF801 C826

JW825

R406
JW126

R541
J105
R823

C806

JW824
R805 JW833 R152
JW816 JR801

JW165
R826 R821 JW219 AUDIO IN
JR803

IC401 H-7

JW823
R843
JW127
R824

R175
C814 R801 JW815
CF802

JR101 (KR) JW832

R851 IC801 E-4
C853

C851 JW128
C810 R151
JR102 (MX, TW) JW813 L104

JW202
JW822
IC861 C-6

C403
E K JW201
C802
C811

C855

L851
JR103 (AR, AUS) JW814 JW831
L852

D851 R118
C852

JW153
R802 R419

JW138

C115
JW806 JW200

C431
C813 A A
C873

JW807

Q101 L-4
JW808

JR104 (E51, SP) R116

IC801

R809

R120
Q102 L-4
R420

JW152
W802
JW140
C856

C854

R853

JR105 (CND) JW804

JW817

JW129
R848
C831

JW132
Q103 L-4
JW821

JR106 (UK) R117

C833 JW802 C819 R807
JW818
C832

R119
L103
JR107 (RU) J102
JW803 A
Q121 J-5
W801

R115 PHONES

C142
C141
JW805
D803

JW139
A
R822
Q122 J-5
L805

R840
R815

F R817
R806

R833
C807

R808

JW409
R850
C815

JW417
JW834
Q123 H-4
R818
C825

R836 R849 C809

R813

A
C829
C830

C820
C801

Q191 C-10
D815

C821 C816 A/K

X801 K R441
C822

C111
C843

C817 R442
L806

Q192 C-10
C824

C823
R819

C834
JW835

(EXCEPT UK, RU) R507 C543

C848 CLP501
R834
C434
C507
Q193 B-10
C841

R812

C847 R816 C505

R811

R505
R835

C510
Q194 B-8
R509

C509
JW829 R814
C836
C835

R517

JW107
C839 R503
R518
C840

R841 R830 R511

JW830 TAPE
R440 C503
Q195 B-8

R515
MECHANISM
R508
R839

R829
G C433 C506
C544 DECK
(L-CH)
Q351 M-5

JW150
E E R504 C508
Q801

R863

R439 R506
R820

Q802 CLP103 (R-CH)

Q352 L-5
R512 1
R837

R838
C838

C533 C504

C535
TPR501

R516
C515 R510

CNP501
R844 R827 (REC/PB)

JW819
JW416
C408 Q371 L-6
R846

C404
R847

SW501
C800

R842

Q372 L-5

CLP401
JW134

R513
R845 R514 4

JW151
JR402 C407 -1
JR401 C421
PIN102 JW408
Q507 K-7
JW403

C406
JW410
JW402

R410
Q801 G-3
JW148

-2
C502

H
C410
R129

Q802 G-2
R128

(REC/PB)
C182

C184

C122 JR403 SW501

JW405 C501
IC401
JW404

REC
PT-AC BOARD (AC IN)
Q803 D-3
JW157

E
JW418
Q123

R501
C409

JW142
PB
R402

+ R502
Q861 C-7
R130
R182

JW143

C519
JW154
L C113 C402
Q862 C-8
C513
CLP102

R411 JR404
R412

– K T001
D131

A JW411 R519 T002

J101 R114 K
R131 C412
SPEAKER JW158 JW106 C518 (E51, BR, SP)
R113 C188 C529 C511
R404

C531
R520

C512

I
R105

JW101 C438
R103
C114

JW104

T004
– JW407
R521

C514

VOLTAGE-SEL BOARD
R405

R C522 C532
C401

WH401 R424 R430

JW102 R403
JW103 JW401
R106

C437
R123

C181 R527
+ R534
R522

WHT
RED
R528

C413

BLK
(UK, RU, KR) JW406 R429

RED
R181 JW159
C528
R434
C105

C187 WH5
R433
R426
C183

F001
JW160 R524 (EXCEPT E51, BR, SP)
C416

R532

R530

JW412
C121

R121

R526 W006
C405

R425
CLP101 T005
R423

C524 C526
Q122

PIN101 JW161
C101 E R529
C525

JW002
R860

T003
J R427
R859

WHT
C527
R126
R127

R428
Q121

C415

E S002 WH7
R533
R531

A A W005 W007 VOLTAGE

JW155

JW413

JW414

JW415

R124 SELECTOR
C534

D372
R125 R525

F002
110 –
K
C156

C523 120V 127V

JW146
JW181

D108
D110

1
D111

R523
D113

220 – 220V

BLK
PT005
C567 240V
CNA102

POWER TRANSFORMER
WH6
C312

C310

R302

R308

R301

R307

C155 R545 (E51, SP) (BR)

(E51, SP)

L501 C561
D109

3
R561 R542
K
D107

JW171 R304
R544
(EXCEPT E51, SP)

T006
C309

Q507
R303

JW166
R543
R536

JW144 ∗
R306 E
C307

C311
JW170

R305

R560

C564
JW145
K
C562

13, 14, 15
R564
JW133

R111 D371
R535

E 1-876-658- (13, 14, 15)

C110

R565

R101 A A C304
R383

R112
Q372
R384

C305
D114

∗ NOT REPLACEABLE:
C306

R102
JW156

C109
R107

C565

R354 BUILT IN TRANSFORMER

C303
Q371

R184 Q103 C382

C118

E (CHASSIS)
E
L E
R339

R353
R382

Q102 C381
C301

D106 R109
Q352
JW169

A K
D112

R381 JW168 C308

R356 R355 E
W008
R108

JW182 C315 C302

R340

B C E G
Q351
R110

R351
R352

R365

HT101 Q101 D

R104 IC301 3 CN002

R374 C371
S R373
JW141
1
JW167 JW149
JW147

R371
R372
R380

R379

R378

R377

R376

R375

M 13 13, 14, 15
1-876-655- (13) 1-876-657- (13, 14, 15)

Note: Refer to supplement-1 for MAIN board (Brazilian, Thai models).

HCD-EH15
20 20
 HCD-EH15

• IC Block Diagrams
– CD Board –
IC201 TK63115SCL-G@GT IC401 BA5826SFP-E2

VIN 1 VO1(–) 1 28 GND

D.BUFF
THERMAL & 27 VO4(–)
OVER CURRENT VO1(+) 2
D.BUFF
PROTECTION D.BUFF LEVEL
SHIFT 26 VO4(+)

VOLTAGE – IN1 3 LEVEL D.BUFF

GND 2
REFERENCE + SHIFT
5 VOUT
25 IN4
ON/OFF RESET 4
VCONT 3 4 NC
CONTROL

THERMAL 24 IN4'
SHUT-DOWN
REGULATOR
BIAS TRAP

REGULATOR
REGB 5 23 BIAS

REGOUT 6 VCC 22 VCC

MUTE 7 MUTE VCC 21 VCC

20 IN3'
GND 8

IN2' 9
19 IN3
IN2 10
LEVEL
LEVEL SHIFT D.BUFF
D.BUFF SHIFT
VO2(+) 11 18 VO3(+)
D.BUFF
D.BUFF
VO2(–) 12 17 VO3(–)
GND 13
16 RESETt
OPOUT 14
15 OPIN

– MAIN Board –
IC101 TK70540SCL-G IC301 LA4631-E
VOUT
VIN

POP NOISE THERMAL

5 4 REFERENCE
PREVENTION SHUT DOWN
AMP
CIRCUIT PROTECTOR

CONTROL OVER HEAT &

CIRCUIT OVER CURRENT
INPUT PRE OUTPUT
PROTECTION AMP
AMP DRIVE AMP
–
+
INPUT PRE OUTPUT
AMP DRIVE AMP AMP

BANDGAP
REFERENCE
RIPPLE STANDBY
FILTER SWITCH

1 2 3 1 2 3 4 5 6 7 8 9 10 11 12 13
VCONT

NP
GND

STANDBY
FILTER

IN1

PRE GND

IN2

P.P.

VCC

OUT2

POWER GND

OUT1

21
HCD-EH15

IC401 BD3881FV
REC1O

REC2O
REC1N

REC2N

OUT1

OUT2
BAS1

BAS2
INC2

INC1

INB2

INB1

INA2

INA1
28 27 26 25 24 23 22 21 20 19 18 17 16 15

BASS BASS

VOLUME TREBLE

LOGIC
CONTROL
VOLUME TREBLE

1 2 3 4 5 6 7 8 9 10 11 12 13 14

VDD
PB1P

PB2P

CONT
PB1N

PB2N

PB2O

PB1O

VOLIN1

VOLIN2

GND

TRE1

TRE2

VEE

IC861 PT2579SN
MODE
DVDD

DVSS
RDCL

OSC2

OSC1

TEST
T57

16 15 14 13 12 11 10 9

OSCILLATION TEST LOGIC &

& OUTPUT SELECTOR
DIVIDER SWITCH

BIPHASE COSTAS LOOP CLOCKED

ANTI-ALIASING
SYMBOL VARIABLE & COMPARATOR
FILTER
DECODER FIXED DIVIDER

CLOCK 57 kHz
REGENERATION BAND PASS
& SYNC (8th ORDER)

QUALITY BIT DIFFERENTIAL REFERENCE

RECONSTRUCTION
GENERATOR DECODER VOLTAGE
FILTER

1 2 3 4 5 6 7 8
RDDA
QUAL

SCOUT
VREF

MUX

AVDD

AVSS

CIN

22
 HCD-EH15

IC801 LV23003VA

AM FM
AM RF-IN 1 36 FM RF-IN
RF RF
35 GND2
34 FMRF-OUT
REG 2
FM 33 VCC2
FM-MIX 3 FM
MIX 32 FM-OSC
OSC
GND1 4
AM
AM-MIX 5 AM
MIX 31 AM-OSC
OSC
VCC1 6 30 BO2
OSC 29 BO1
BUFFER LOW-PASS 28 LP-OUT
FILTER 27 LP-IN
26 PD
AGC 25 AGC
AMIF-IN 7 AM AM
IF DET 24 AMDET-OUT

FMIF-IN 8 FM FM
23 FMDET-OUT
IF DET

FM
S-METER

SD
IF
BUFFER ST
PIROT
P-DET 9 DET TRIG

STSW
FF

FF FF

PHASE VCO
P-COMP 10
COMPARATOR
FM-DET 11
L-OUT 12
DECODER
R-OUT 13 MUTE 22 MPX-IN
VSS 14

UNIVERSAL POWER ON 21 VDD

COUNTER RESET
PROGRAMMABLE
DATA SHIFT DIVIDER
CE 15 REGISTER
16 LATCH
DI CCB SWALLOW
CL 17 I/F COUNTER
DO 18
PHASE
UNLOCK DETECTOR
DETECTOR CHARGE
PUMP

20 XOUT
REFERENCE
19 XIN
DIVIDER

23
HCD-EH15

• IC Pin Function Description

CD BOARD IC101 (CD-MP3 PROCESSOR) TC94A70FG-006
Pin No. Pin Name I/O Description
1 AVSS3 - Ground terminal
2 RFZi I RF ripple zero crossing signal input terminal
3 RFRP O RF ripple signal output terminal
4 SBAD/RFDC O Sub beam addition signal or RF peak detection signal output terminal Not used
5 FEi O Focus error signal output terminal Not used
6 TEi O Tracking error signal output terminal
7 TEZi I Tracking error zero crossing signal input terminal
8 AVDD3 - Power supply terminal (+3.3 V)
9 FOo O Focus coil drive signal output terminal
10 TRo O Tracking coil drive signal output terminal
11 VREF I Reference voltage (+1.65V) input terminal
12 FMo O Sled motor drive signal output terminal
13 DMo O Spindle motor drive signal output terminal
14 VSSP3 - Ground terminal
15 VCOi I VCO control voltage input terminal
16 VDDP3 - Power supply terminal (+3.3 V)
17 VDD1 - Power supply terminal (+1.5 V)
18 VSS - Ground terminal
19 FGiN I FG signal input terminal Not used
20 IO0 (/HSO) I Disc inner position detection signal input terminal
21 IO1 (/UHSO) O Not used
22 XVSS3 - Ground terminal
23 XI I System clock input terminal (16.9344 MHz)
24 XO O System clock output terminal (16.9344 MHz)
25 XVDD3 - Power supply terminal (+3.3 V)
26 DVSS3 - Ground terminal
27 RO O Audio data (R-ch) output to the input selector
28 DVDD3 - Power supply terminal (+3.3 V)
29 DVR O Reference voltage (+1.65V) output terminal
30 LO O Audio data (L-ch) output to the input selector
31 DVSS3 - Ground terminal
32 VDDT3 - Power supply terminal (+3.3 V)
33 VSS1 - Ground terminal
34 VDD1 - Power supply terminal (+1.5 V)
35 VDDM1 - Power supply terminal (+1.5 V)
36 SRAMSTB I S-RAM standby mode control signal input terminal Fixed at "L" in this set
37 XRST I Reset signal input from the system controller "L": reset
38, 39 BUS0, BUS1 I Serial data input from the system controller
40 BUS2 (SO) I Serial data input from the system controller
41 BUS3 (SI) I Serial data input from the system controller
42 BUCK (CLK) I Serial data transfer clock signal input from the system controller
43 XCCE I Chip enable signal input from the system controller
44 TEST I Setting terminal for test mode Normally fixed at "L"
45 IRQ I Interrupt request signal input terminal Not used
46 AoUT3 (PO4) O Request signal output terminal Not used
47 AoUT2 (PO5) O Audio data output terminal Not used
48 PIO0 O Request signal output to the system controller
49, 50 PIO1, PIO2 O Not used
51 PIO3 I Gate signal input terminal Not used
52 VSS1 - Ground terminal
53 VDDT3 - Power supply terminal (+3.3 V)
54 SBSY O Subcode block sync signal output to the system controller
55 SBOK/FOK O Not used
56 IPF O Not used

24
 HCD-EH15

Pin No. Pin Name I/O Description

57 SFSY/LOCK O Not used
58 ZDET O Zero detection signal output terminal Not used
59 GPIN I Not used
60 MS I Microcomputer interface mode selection signal input terminal Fixed at "H" in this set
61 DOUT (PO6) O Digital audio data output terminal Not used
62 AOUT (PO7) O Audio data output terminal Not used
63 BCK (PO8) O Bit clock signal output terminal Not used
64 LRCK (PO9) O L/R sampling clock signal output terminal Not used
65 AIN (PI4) I Digital audio data input terminal Not used
66 BCKi (PI5) I Bit clock signal input terminal Not used
67 LRCKi (PI6) I L/R sampling clock signal input terminal Not used
68 VDD1 - Power supply terminal (+1.5 V)
69 VSS - Ground terminal
70 AWRC - Not used
71 PVDD3 - Power supply terminal (+3.3 V)
72 PDO O Phase error margin signal between EFM signal and PLCK signal output terminal
73 TMAXS O TMAX detection signal output terminal Not used
74 TMAX O TMAX detection signal output terminal
75 LPFN I Inverted signal input from the operation amplifier for PLL loop filter
76 LPFo O Signal output from the operation amplifier for PLL loop filter
77 PVREF I Reference voltage (+1.65V) input terminal
78 VCOF O VCO filter output terminal
79 PVSS3 - Ground terminal
80 SLCo O EFM slice level output terminal
81 RFi I RF signal input terminal
82 RFRPi I RF ripple signal input terminal
83 RFEQo O EFM slice level output terminal
84 VRo O Reference voltage (+1.65V) output terminal
85 RESiN O External resistor connection terminal
86 VMDiR O Reference voltage (+1.65V) output terminal for automatic power control circuit
87 TESTR O Low-pass filter terminal for RFEQO offset correction
88 AGCi I RF signal amplitude adjustment amplification input terminal
89 RFo O RF signal generation amplification output terminal
90 RVDD3 - Power supply terminal (+3.3 V)
Laser diode on/off control signal output to the automatic power control circuit
91 LDo O
"H": laser diode on
92 MDi I Light amount monitor input from the laser diode of optical pick-up block
93 RVSS3 - Ground terminal
94 FNi2 (C) I Main beam (C) input from the optical pick-up block
95 FNi1 (A) I Main beam (A) input from the optical pick-up block
96 FPi2 (D) I Main beam (D) input from the optical pick-up block
97 FPi1 (B) I Main beam (B) input from the optical pick-up block
98 TPi (F) I Sub beam (F) input from the optical pick-up block
99 TNPC O External capacitor connection terminal
100 TNi (E) I Sub beam (E) input from the optical pick-up block

25
HCD-EH15

PANEL BOARD IC701 MB90F830PF-GE1 (SYSTEM CONTROLLER)

Pin No. Pin Name I/O Description
1 LED O LED drive signal output terminal for liquid crystal display back light "H": LED on
2 CD OPEN/CLOSE I CD lid open/close detection switch input terminal "L": CD lid is closed
3 REQ I Request signal input from the CD-MP3 processor
4 MMUT O Muting signal output to the coil/motor driver
5 to 8 BUS0 to BUS3 O Serial data output to the CD-MP3 processor
9 RMC I Remote control signal input from the remote control receiver
10 BUCK O Serial data transfer clock signal output to the CD-MP3 processor
11 XCCEN O Chip enable signal output to the CD-MP3 processor
12 XRST O Reset signal output to the CD-MP3 processor "L": reset
13 X2 I Sub system clock input terminal (32.768 kHz)
14 X3 O Sub system clock output terminal (32.768 kHz)
15 VCC - Power supply terminal (+3.3V)
16 VSS - Ground terminal
17 to 21 NC - Not used
22 LED_STBY O LED drive signal output terminal for STANDBY indicator "L": LED on
23 CD_ON O Power supply on/off control signal output terminal for CD section "H": power on
24 NC - Not used
25 TU_DO I Serial data input from the FM/AM tuner
26 RDA_DATA I RDS serial data input from the RDS decoder (UK model only)
27 to 31 NC - Not used
32 AVCC - Power supply terminal (+3.3V)
33 FUNC_SDA O Serial data output to the electrical volume
34 AMP_ON O Standby control signal output to the power amplifier "L": standby
35 AVSS - Ground terminal
36 P_MONI I Power monitor input terminal
37, 38 KEY1, KEY2 I Front panel key input terminal (A/D input)
39 TU_ASD I Auto gain control signal input from the FM/AM tuner
40 TP_STATE I REC/PB detection signal input terminal
41 KEY0 I Power key input terminal
42 HOLD I Hold signal input terminal
43 SBSY I Subcode block sync signal input from the CD-MP3 processor
44 VSS - Ground terminal
45 RDS_CLK I RDS serial data transfer clock signal input from the RDS decoder (UK model only)
46 POWER_ON O Main power supply on/off control signal output terminal "H": power on
47 SUFIX I Destination setting terminal
48 RE_VOL I Jog dial pulse input from the rotary encoder (for VOLUME)
49, 50 NC - Not used
51 MD2 I Mode setting terminal Fixed at "L" in this set
52, 53 MD1, MD0 I Mode setting terminal Fixed at "H" in this set
Reset signal input terminal "L": reset
54 RESET I
For several hundreds msec. after the power supply rises, "L" is input, then it changes to "H"
55 TU_CE O Chip enable signal output to the FM/AM tuner
56 TU_CLK O Serial data transfer clock signal output to the FM/AM tuner
57 TU_DI O Serial data output to the FM/AM tuner
Terminal for doubler circuit capacitor connection to develop liquid crystal display drive volt-
58 V3 -
age
59 to 62 COM0 to COM3 O Common drive signal output to the liquid crystal display
63, 64 SEG0, SEG1 O Segment drive signal output to the liquid crystal display
65 VCC - Power supply terminal (+3.3V)
66 VSS - Ground terminal
67 to 89 SEG2 to SEG24 O Segment drive signal output to the liquid crystal display
90 VCC - Power supply terminal (+3.3V)
91 VSS - Ground terminal
92 X1 I Main system clock output terminal (5.53 MHz)
93 X0 O Main system clock input terminal (5.53 MHz)
94 to 100 SEG25 to SEG31 O Segment drive signal output to the liquid crystal display

26
 HCD-EH15
SECTION 8 Ver. 1.1
EXPLODED VIEWS
Note:
• -XX and -X mean standardized parts, so • Color Indication of Appearance Parts Ex- MX : Mexican model
they may have some difference from the ample: RU : Russian model
original one. KNOB, BALANCE (WHITE) . . . (RED) SP : Singapore model
• Items marked “*” are not stocked since R R TH : Thai model
they are seldom required for routine ser- Parts Color Cabinet’s Color TW : Taiwan model
vice. • Accessories are given in the last of the
Some delay should be anticipated when electrical parts list. The components identified by mark 0
ordering these items. • Abbreviation or dotted line with mark 0 are critical for
• The mechanical parts with no reference AR : Argentina model safety.
number in the exploded views are not sup- AUS : Australian model Replace only with part number specified.
plied. BR : Brazilian model Les composants identifiés par une marque
CND : Canadian model 0 sont critiques pour la sécurité.
E51 : Chilean and Peruvian model Ne les remplacer que par une pièce portant
KR : Korean model le numéro spécifié.

8-1. OVERALL SECTION

not supplied F002 (E51, BR, SP)
top cabinet section (VOLTAGE-SEL board)
7
(CND, E51, MX,
(UK, KR, RU)
#2 BR, SP, TW)

7 not supplied
8
MAIN
board
#1 #2
6 4

#1 (BR)
not supplied
(HOLDER1
board) not supplied
not supplied
(E51, MX, BR, #1
not supplied 8
SP, TW, AR, 9
KR, TH, AUS) not supplied
PT005
5 3 5
1 #2 #2

F001
#3
front cabinet section 9

2
not supplied
not supplied
(PT-AC board)

Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark
1 A-1508-439-A MAIN BOARD, COMPLETE (UK) 04 1-834-697-12 CORD, POWER (TH)
1 A-1508-519-A MAIN BOARD, COMPLETE (CND) 04 1-835-069-11 CORD, POWER (UK)
1 A-1508-544-A MAIN BOARD, COMPLETE (AR, AUS) 5 3-198-753-11 FOOT (FELT)
1 A-1508-664-A MAIN BOARD, COMPLETE (E51, SP) 6 3-700-085-01 SHEET, COPPER LEAF (UK, KR, RU)
1 A-1508-703-A MAIN BOARD, COMPLETE (KR, TH)
7 3-087-053-01 +BVTP2.6 (3CR)
1 A-1508-735-A MAIN BOARD, COMPLETE (MX, TW) 8 2-580-644-01 SCREW, +KTP2 3X8
1 A-1542-780-A MAIN BOARD, COMPLETE (RU) 9 3-572-085-00 WASHER, FIBER
1 A-1547-015-A MAIN BOARD, COMPLETE (BR) 0 F001 1-532-275-33 FUSE (T160mAL/250V)
2 3-701-748-00 CLAMP (UK, AR, KR, TH, AUS, RU)
3 3-287-571-01 CABINET, REAR (UK, TW, AR, KR,TH, AUS, RU) 0 F001 1-532-467-33 FUSE (T315mAL/250V)
(CND, E51, MX, BR, SP, TW)
3 3-287-571-11 CABINET, REAR (CND)
3 3-287-571-21 CABINET, REAR (E51, SP) 0 F002 1-532-275-33 FUSE (T160mAL/250V) (E51, BR, SP)
3 3-287-571-31 CABINET, REAR (MX) 0 PT005 1-445-421-11 TRANSFORMER, POWER (AR, KR, TH)
3 3-287-571-51 CABINET, REAR (BR) 0 PT005 1-445-422-11 TRANSFORMER, POWER (UK, RU)
04 1-769-079-51 CORD, POWER (KR) 0 PT005 1-445-423-11 TRANSFORMER, POWER (E51, SP, AUS)
0 PT005 1-445-424-11 TRANSFORMER, POWER (CND, MX, TW)
0 4 1-775-790-81 CORD, POWER (AUS)
0 4 1-790-757-52 CORD, POWER (CND, MX) 0 PT005 1-445-513-11 TRANSFORMER, POWER (BR)
0 4 1-827-597-81 CORD, POWER (TW) #1 7-685-646-79 SCREW +BVTP 3X8 TYPE2 IT-3
0 4 1-830-891-11 CORD, POWER (E51, SP, RU) #2 7-685-647-79 SCREW +BVTP 3X10 TYPE2 IT-3
0 4 1-832-228-11 CORD, POWER (AR) #3 7-685-649-79 SCREW +BVTP 3X14 TYPE2 IT-3

04 1-833-218-21 POWER-SUPPLY CORD (BR)

27
HCD-EH15
Ver. 1.1

8-2. FRONT CABINET SECTION

58
FFC002
PANEL board

64

67
(TW)
LED701
52 66 74
LCD702 65

not supplied
60 58
57 61 FFC003
51 58
FFC001 68
58 58 70 69

70
56
72 58

58 73

not supplied
53
62
58 not supplied 71
55
63
54 69

Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark
51 3-280-084-01 KNOB (VOL) 65 2-636-545-01 SHEET (LCD)
52 A-1508-461-A CABINET ASSY, FRONT (EXCEPT UK, RU) 66 2-636-532-01 ILLUMINATOR (LCD)
52 A-1518-789-A CABINET ASSY, FRONT (UK) 67 2-636-531-01 HOLDER (LCD)
52 A-1551-700-A CABINET ASSY, FRONT (RU) 68 2-636-546-01 LEVER (REC)
53 3-280-079-01 BUTTON COVER (C) 69 3-254-022-01 SCREW

54 2-637-768-01 SPRING (CASSETTE) 70 3-701-748-00 CLAMP

55 3-288-035-01 HOLDER (CASSETTE) 71 A-1313-349-A MF-EH10 (TAPE MECHANISM DECK)
56 3-280-077-01 LID, CASSETTE 72 2-670-389-01 BELT (1)
57 3-047-468-01 DAMPER 73 3-214-817-01 BELT (FR)
58 3-087-053-01 +BVTP2.6 (3CR) 74 1-457-413-11 CORE, FERRITE (TW)

60 3-280-083-01 BUTTON (OPERATION) FFC001 1-832-796-21 CABLE, FLEXIBLE FLAT (5 CORE) (RU)
61 2-636-524-01 HOLDER, PWB FFC001 1-832-797-21 CABLE, FLEXIBLE FLAT (5 CORE)
62 3-280-081-01 BUTTON (CASSETTE) (EXCEPT UK, RU)
(z, N, m, M, x Z, X) FFC001 1-832-807-21 CABLE, FLEXIBLE FLAT (7 CORE) (UK)
63 3-280-088-01 SPRING (C-BUTTON LID) FFC002 1-832-854-21 CABLE, FLEXIBLE FLAT (17 CORE)
64 A-1508-455-A PANEL BOARD, COMPLETE (UK) FFC003 1-832-749-21 CABLE, FLEXIBLE FLAT (21 CORE) (TW)

64 A-1508-530-A PANEL BOARD, COMPLETE (CND, BR) FFC003 1-835-211-21 CABLE, FLEXIBLE FLAT (EXCEPT TW)
64 A-1508-558-A PANEL BOARD, COMPLETE (SP, TW, KR, TH) LCD702 1-802-381-11 DISPLAY PANEL, LIQUID CRYSTAL
64 A-1508-593-A PANEL BOARD, COMPLETE (E51, MX, AR) LED701 6-502-498-01 LED SELU2B10A-SLF62FGH (LCD BACK LIGHT)
64 A-1527-693-A PANEL BOARD, COMPLETE (AUS)
64 A-1542-781-A PANEL BOARD, COMPLETE (RU)

28
 HCD-EH15

8-3. TOP CABINET SECTION

101

102
not supplied

103 113

104
111
106

112

105 SW750

107

108
base unit section
(BU-K8BD90-WOD)

110 108

109 109
110

Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark
101 2-636-518-31 LID, CD 109 3-252-828-01 SCREW (B2.6), (+) PWH TAPPING
102 1-452-899-11 MAGNET 110 3-931-379-31 RUBBER, VIBRATION PROOF (GREEN)
103 3-019-395-01 PLATE, CHUCKING
104 2-637-769-01 SPRING (CD) 111 3-253-143-01 SCREW (B2.6), (+) P TAPPING
105 2-636-515-02 CABINET, TOP 112 3-087-053-01 +BVTP2.6 (3CR)
113 2-675-085-01 SPACER
106 3-047-468-11 DAMPER SW750 1-692-960-11 SWITCH, PUSH (1 KEY)
107 4-247-493-01 COVER, CD (CD LID OPEN/CLOSE DETECT)
108 3-931-379-21 RUBBER, VIBRATION PROOF (RED)

29
HCD-EH15

8-4. BASE UNIT SECTION (BU-K8BD90-WOD)

151
(including sled motor (M402),
spindle motor (M401))

included in 151
(spindle motor (M401))

included in 151
(sled motor (M402)) 152

S201

153

Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark
0 151 8-820-126-02 OPTICAL PICK-UP BLOCK (KSM-213CDP/C2NP) 153 A-1217-914-A CD BOARD, COMPLETE
(Including spindle motor (M401), sled motor (M402)) S201 1-771-853-11 SWITCH, DETECTION (LIMIT)
152 1-834-268-21 WIRE (FLAT TYPE) (16 CORE)

30
 HCD-EH15
SECTION 9 Ver. 1.1
CD
ELECTRICAL PARTS LIST
Note:
• Due to standardization, replacements in • RESISTORS MX : Mexican model
the parts list may be different from the All resistors are in ohms. RU : Russian model
parts specified in the diagrams or the com- METAL: Metal-film resistor. SP : Singapore model
ponents used on the set. METAL OXIDE: Metal oxide-film resistor. TH : Thai model
• -XX and -X mean standardized parts, so F: nonflammable TW : Taiwan model
they may have some difference from the • SEMICONDUCTORS When indicating parts by reference num-
original one. In each case, u: μ, for example: ber, please include the board name.
• Items marked “*” are not stocked since uA. . : μA. . , uPA. . , μPA. . ,
they are seldom required for routine ser- uPB. . : μPB. . , uPC. . , μPC. . , The components identified by mark 0
vice. uPD. . : μPD. . or dotted line with mark 0 are critical for
Some delay should be anticipated when • Abbreviation safety.
ordering these items. AR : Argentina model Replace only with part number specified.
• CAPACITORS AUS : Australian model
uF: μF BR : Brazilian model Les composants identifiés par une marque
• COILS CND : Canadian model 0 sont critiques pour la sécurité.
uH: μH E51 : Chilean and Peruvian model Ne les remplacer que par une pièce portant
KR : Korean model le numéro spécifié.

Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark
A-1217-914-A CD BOARD, COMPLETE C147 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V
******************* C148 1-162-923-11 CERAMIC CHIP 47PF 5% 50V
C149 1-162-919-11 CERAMIC CHIP 22PF 5% 50V
< CAPACITOR > C150 1-162-964-11 CERAMIC CHIP 0.001uF 10% 50V
C151 1-164-315-11 CERAMIC CHIP 470PF 5% 50V
C100 1-164-360-11 CERAMIC CHIP 0.1uF 16V
C101 1-164-360-11 CERAMIC CHIP 0.1uF 16V C152 1-164-315-11 CERAMIC CHIP 470PF 5% 50V
C102 1-164-360-11 CERAMIC CHIP 0.1uF 16V C153 1-164-360-11 CERAMIC CHIP 0.1uF 16V
C103 1-164-360-11 CERAMIC CHIP 0.1uF 16V C201 1-128-995-21 ELECT CHIP 100uF 20% 10V
C104 1-164-360-11 CERAMIC CHIP 0.1uF 16V C202 1-128-995-21 ELECT CHIP 100uF 20% 10V
C204 1-164-360-11 CERAMIC CHIP 0.1uF 16V
C105 1-164-360-11 CERAMIC CHIP 0.1uF 16V
C106 1-128-995-21 ELECT CHIP 100uF 20% 10V C205 1-164-360-11 CERAMIC CHIP 0.1uF 16V
C107 1-164-360-11 CERAMIC CHIP 0.1uF 16V C206 1-165-908-11 CERAMIC CHIP 1uF 10% 10V
C108 1-164-360-11 CERAMIC CHIP 0.1uF 16V C207 1-165-908-11 CERAMIC CHIP 1uF 10% 10V
C109 1-164-360-11 CERAMIC CHIP 0.1uF 16V C301 1-164-360-11 CERAMIC CHIP 0.1uF 16V
C302 1-137-710-91 CERAMIC CHIP 10uF 20% 6.3V
C110 1-164-360-11 CERAMIC CHIP 0.1uF 16V
C112 1-164-360-11 CERAMIC CHIP 0.1uF 16V C303 1-137-710-91 CERAMIC CHIP 10uF 20% 6.3V
C113 1-164-360-11 CERAMIC CHIP 0.1uF 16V C306 1-128-995-21 ELECT CHIP 100uF 20% 10V
C115 1-124-778-00 ELECT CHIP 22uF 20% 6.3V C307 1-165-908-11 CERAMIC CHIP 1uF 10% 10V
C116 1-164-360-11 CERAMIC CHIP 0.1uF 16V C309 1-162-964-11 CERAMIC CHIP 0.001uF 10% 50V
C401 1-128-394-11 ELECT CHIP 220uF 20% 10V
C117 1-164-227-11 CERAMIC CHIP 0.022uF 10% 25V
C118 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C403 1-164-360-11 CERAMIC CHIP 0.1uF 16V
C119 1-164-227-11 CERAMIC CHIP 0.022uF 10% 25V C404 1-164-360-11 CERAMIC CHIP 0.1uF 16V
C120 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C405 1-164-360-11 CERAMIC CHIP 0.1uF 16V
C122 1-164-315-11 CERAMIC CHIP 470PF 5% 50V
< CONNECTOR >
C123 1-164-315-11 CERAMIC CHIP 470PF 5% 50V
C124 1-162-968-11 CERAMIC CHIP 0.0047uF 10% 50V CN201 1-784-833-51 CONNECTOR, FFC (LIF (NON-ZIF)) 21P
C125 1-162-968-11 CERAMIC CHIP 0.0047uF 10% 50V CN301 1-770-425-51 CONNECTOR, FFC/FPC 16P
C126 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V
C127 1-162-966-11 CERAMIC CHIP 0.0022uF 10% 50V < IC >

C128 1-162-910-11 CERAMIC CHIP 5PF 0.25PF 50V IC101 6-712-622-01 IC TC94A70FG-006 (D, HZ
C130 1-162-910-11 CERAMIC CHIP 5PF 0.25PF 50V IC201 6-710-808-01 IC TK63115SCL-G@GT
C132 1-164-360-11 CERAMIC CHIP 0.1uF 16V IC401 6-710-637-01 IC BA5826SFP-E2
C133 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V
C136 1-162-923-11 CERAMIC CHIP 47PF 5% 50V < TRANSISTOR >

C137 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V Q301 6-551-120-01 TRANSISTOR 2SA2119K
C138 1-164-315-11 CERAMIC CHIP 470PF 5% 50V
C139 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V < RESISTOR >
C140 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V
C141 1-162-966-11 CERAMIC CHIP 0.0022uF 10% 50V R101 1-216-813-11 METAL CHIP 220 5% 1/10W
R102 1-216-833-11 METAL CHIP 10K 5% 1/10W
C142 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V R104 1-216-295-91 SHORT CHIP 0
C143 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V R105 1-216-857-11 METAL CHIP 1M 5% 1/10W
C144 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V R106 1-216-821-11 METAL CHIP 1K 5% 1/10W
C145 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V
C146 1-164-315-11 CERAMIC CHIP 470PF 5% 50V R108 1-216-864-11 SHORT CHIP 0
R110 1-216-833-11 METAL CHIP 10K 5% 1/10W

31
HCD-EH15
Ver. 1.1
CD MAIN

Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark
R111 1-216-809-11 METAL CHIP 100 5% 1/10W < VIBRATOR >
R112 1-216-809-11 METAL CHIP 100 5% 1/10W
R113 1-216-833-11 METAL CHIP 10K 5% 1/10W X102 1-795-101-21 VIBRATOR, CERAMIC (16.9344MHz)
************************************************************
R114 1-216-833-11 METAL CHIP 10K 5% 1/10W
R118 1-216-845-11 METAL CHIP 100K 5% 1/10W A-1508-439-A MAIN BOARD, COMPLETE (UK)
R120 1-216-864-11 SHORT CHIP 0 A-1508-519-A MAIN BOARD, COMPLETE (CND)
R125 1-216-864-11 SHORT CHIP 0 A-1508-544-A MAIN BOARD, COMPLETE (AR, AUS)
R126 1-216-864-11 SHORT CHIP 0 A-1508-664-A MAIN BOARD, COMPLETE (E51, SP)
A-1508-703-A MAIN BOARD, COMPLETE (KR)
R127 1-216-864-11 SHORT CHIP 0
R128 1-216-853-11 METAL CHIP 470K 5% 1/10W A-1508-735-A MAIN BOARD, COMPLETE (MX, TW)
R129 1-216-821-11 METAL CHIP 1K 5% 1/10W A-1542-780-A MAIN BOARD, COMPLETE (RU)
R130 1-216-829-11 METAL CHIP 4.7K 5% 1/10W *********************
R134 1-216-857-11 METAL CHIP 1M 5% 1/10W
7-685-646-79 SCREW +BVTP 3X8 TYPE2 N-S
R135 1-216-853-11 METAL CHIP 470K 5% 1/10W
R136 1-216-837-11 METAL CHIP 22K 5% 1/10W < BAND PASS FILTER >
R139 1-216-841-11 METAL CHIP 47K 5% 1/10W
R140 1-216-864-11 SHORT CHIP 0 BPF801 1-236-711-21 FILTER, BAND PASS
R142 1-216-837-11 METAL CHIP 22K 5% 1/10W
< CAPACITOR/RESISTOR >
R143 1-216-841-11 METAL CHIP 47K 5% 1/10W
R144 1-216-837-11 METAL CHIP 22K 5% 1/10W C101 1-128-549-11 ELECT 3300uF 20% 35V
R145 1-216-864-11 SHORT CHIP 0 C105 1-100-566-91 CERAMIC CHIP 0.1uF 10% 25V
R146 1-216-864-11 SHORT CHIP 0 (UK, RU)
R147 1-216-864-11 SHORT CHIP 0 C105 1-117-863-11 CERAMIC CHIP 0.47uF 10% 6.3V
(KR)
R148 1-216-864-11 SHORT CHIP 0 C109 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V
R149 1-216-864-11 SHORT CHIP 0 C110 1-115-467-11 CERAMIC CHIP 0.22uF 10% 10V
R150 1-216-864-11 SHORT CHIP 0
R151 1-216-864-11 SHORT CHIP 0 C111 1-164-156-11 CERAMIC CHIP 0.1uF 25V
R153 1-216-857-11 METAL CHIP 1M 5% 1/10W C113 1-126-953-11 ELECT 2200uF 20% 35V
C114 1-100-566-91 CERAMIC CHIP 0.1uF 10% 25V
R154 1-216-857-11 METAL CHIP 1M 5% 1/10W C115 1-164-156-11 CERAMIC CHIP 0.1uF 25V
R155 1-216-805-11 METAL CHIP 47 5% 1/10W C118 1-126-933-11 ELECT 100uF 20% 16V
R156 1-216-809-11 METAL CHIP 100 5% 1/10W
R157 1-216-809-11 METAL CHIP 100 5% 1/10W C121 1-117-863-11 CERAMIC CHIP 0.47uF 10% 6.3V
R201 1-216-295-91 SHORT CHIP 0 C122 1-126-923-91 ELECT 220uF 20% 10V
C141 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V
R202 1-216-295-91 SHORT CHIP 0 C142 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V
R203 1-216-809-11 METAL CHIP 100 5% 1/10W C155 1-165-621-91 CERAMIC CHIP 0.1uF 50V
R204 1-216-809-11 METAL CHIP 100 5% 1/10W
R205 1-216-809-11 METAL CHIP 100 5% 1/10W C156 1-165-621-91 CERAMIC CHIP 0.1uF 50V
R206 1-216-809-11 METAL CHIP 100 5% 1/10W C181 1-164-156-11 CERAMIC CHIP 0.1uF 25V
C182 1-164-156-11 CERAMIC CHIP 0.1uF 25V
R207 1-216-809-11 METAL CHIP 100 5% 1/10W C183 1-164-156-11 CERAMIC CHIP 0.1uF 25V
R208 1-216-809-11 METAL CHIP 100 5% 1/10W C184 1-164-156-11 CERAMIC CHIP 0.1uF 25V
R209 1-216-809-11 METAL CHIP 100 5% 1/10W C187 1-216-829-11 METAL CHIP 4.7K 5% 1/10W
R210 1-216-809-11 METAL CHIP 100 5% 1/10W
R211 1-216-809-11 METAL CHIP 100 5% 1/10W C188 1-216-829-11 METAL CHIP 4.7K 5% 1/10W
C189 1-100-566-91 CERAMIC CHIP 0.1uF 10% 25V
R212 1-216-809-11 METAL CHIP 100 5% 1/10W C190 1-126-964-11 ELECT 10uF 20% 50V
R218 1-216-845-11 METAL CHIP 100K 5% 1/10W C191 1-100-566-91 CERAMIC CHIP 0.1uF 10% 25V
R219 1-216-845-11 METAL CHIP 100K 5% 1/10W C192 1-100-566-91 CERAMIC CHIP 0.1uF 10% 25V
R220 1-216-845-11 METAL CHIP 100K 5% 1/10W C193 1-100-566-91 CERAMIC CHIP 0.1uF 10% 25V
R221 1-216-845-11 METAL CHIP 100K 5% 1/10W
C194 1-100-566-91 CERAMIC CHIP 0.1uF 10% 25V
R222 1-216-845-11 METAL CHIP 100K 5% 1/10W C196 1-100-566-91 CERAMIC CHIP 0.1uF 10% 25V
R223 1-216-845-11 METAL CHIP 100K 5% 1/10W C197 1-100-566-91 CERAMIC CHIP 0.1uF 10% 25V
R301 1-216-845-11 METAL CHIP 100K 5% 1/10W C198 1-100-566-91 CERAMIC CHIP 0.1uF 10% 25V
R302 1-216-864-11 SHORT CHIP 0 C199 1-126-923-91 ELECT 220uF 20% 10V
R303 1-216-789-11 METAL CHIP 2.2 5% 1/10W
C301 1-162-966-11 CERAMIC CHIP 0.0022uF 10% 50V
R304 1-216-789-11 METAL CHIP 2.2 5% 1/10W C302 1-162-964-11 CERAMIC CHIP 0.001uF 10% 50V
R402 1-216-825-11 METAL CHIP 2.2K 5% 1/10W C303 1-126-963-11 ELECT 4.7uF 20% 50V
R405 1-216-833-11 METAL CHIP 10K 5% 1/10W C304 1-126-933-11 ELECT 100uF 20% 16V
R408 1-216-825-11 METAL CHIP 2.2K 5% 1/10W C305 1-126-960-11 ELECT 1uF 20% 50V
R414 1-216-829-11 METAL CHIP 4.7K 5% 1/10W
C306 1-126-960-11 ELECT 1uF 20% 50V
R415 1-216-841-11 METAL CHIP 47K 5% 1/10W C307 1-126-767-11 ELECT 1000uF 20% 16V
C308 1-126-767-11 ELECT 1000uF 20% 16V

Note: Refer to supplement-1 for MAIN board (Brazilian, Thai models).

32
 HCD-EH15
Ver. 1.1
MAIN

Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark
C309 1-162-964-11 CERAMIC CHIP 0.001uF 10% 50V C544 1-162-964-11 CERAMIC CHIP 0.001uF 10% 50V
C310 1-162-964-11 CERAMIC CHIP 0.001uF 10% 50V C561 1-162-966-11 CERAMIC CHIP 0.0022uF 10% 50V

C311 1-162-962-11 CERAMIC CHIP 470PF 10% 50V C562 1-162-966-11 CERAMIC CHIP 0.0022uF 10% 50V
C312 1-162-962-11 CERAMIC CHIP 470PF 10% 50V C564 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V
C315 1-162-964-11 CERAMIC CHIP 0.001uF 10% 50V C565 1-115-156-11 CERAMIC CHIP 1uF 10V
C371 1-164-156-11 CERAMIC CHIP 0.1uF 25V C567 1-130-479-00 MYLAR 0.0047uF 5% 50V
C381 1-162-964-11 CERAMIC CHIP 0.001uF 10% 50V C800 1-164-156-11 CERAMIC CHIP 0.1uF 25V

C382 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C801 1-126-933-11 ELECT 100uF 20% 16V
C401 1-126-956-91 ELECT 0.1uF 20% 50V C802 1-100-566-91 CERAMIC CHIP 0.1uF 10% 25V
C402 1-126-933-11 ELECT 100uF 20% 16V C803 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V
C403 1-100-566-91 CERAMIC CHIP 0.1uF 10% 25V C804 1-100-566-91 CERAMIC CHIP 0.1uF 10% 25V
C404 1-115-467-11 CERAMIC CHIP 0.22uF 10% 10V C806 1-162-964-11 CERAMIC CHIP 0.001uF 10% 50V

C405 1-126-956-91 ELECT 0.1uF 20% 50V C807 1-162-966-11 CERAMIC CHIP 0.0022uF 10% 50V
C406 1-115-467-11 CERAMIC CHIP 0.22uF 10% 10V C809 1-100-566-91 CERAMIC CHIP 0.1uF 10% 25V
C407 1-162-968-11 CERAMIC CHIP 0.0047uF 10% 50V C810 1-115-467-11 CERAMIC CHIP 0.22uF 10% 10V
C408 1-162-968-11 CERAMIC CHIP 0.0047uF 10% 50V C811 1-164-156-11 CERAMIC CHIP 0.1uF 25V
C409 1-100-566-91 CERAMIC CHIP 0.1uF 10% 25V C812 1-164-156-11 CERAMIC CHIP 0.1uF 25V

C410 1-100-566-91 CERAMIC CHIP 0.1uF 10% 25V C813 1-126-923-91 ELECT 220uF 20% 10V
C412 1-126-933-11 ELECT 100uF 20% 16V C814 1-164-156-11 CERAMIC CHIP 0.1uF 25V
C413 1-126-933-11 ELECT 100uF 20% 16V C815 1-162-927-11 CERAMIC CHIP 100PF 5% 50V
C415 1-100-566-91 CERAMIC CHIP 0.1uF 10% 25V C816 1-115-467-11 CERAMIC CHIP 0.22uF 10% 10V
C416 1-100-566-91 CERAMIC CHIP 0.1uF 10% 25V C817 1-100-566-91 CERAMIC CHIP 0.1uF 10% 25V

C421 1-100-566-91 CERAMIC CHIP 0.1uF 10% 25V C818 1-216-864-11 SHORT CHIP 0
C431 1-126-960-11 ELECT 1uF 20% 50V C819 1-162-964-11 CERAMIC CHIP 0.001uF 10% 50V
C432 1-126-960-11 ELECT 1uF 20% 50V C820 1-162-964-11 CERAMIC CHIP 0.001uF 10% 50V
C433 1-162-962-11 CERAMIC CHIP 470PF 10% 50V C821 1-165-176-11 CERAMIC CHIP 0.047uF 10% 16V
C434 1-162-962-11 CERAMIC CHIP 470PF 10% 50V C822 1-162-962-11 CERAMIC CHIP 470PF 10% 50V

C437 1-162-962-11 CERAMIC CHIP 470PF 10% 50V C823 1-162-918-11 CERAMIC CHIP 18PF 5% 50V
C438 1-162-962-11 CERAMIC CHIP 470PF 10% 50V C824 1-162-918-11 CERAMIC CHIP 18PF 5% 50V
C501 1-162-923-11 CERAMIC CHIP 47PF 5% 50V C825 1-125-837-91 CERAMIC CHIP 1uF 10% 6.3V
C502 1-162-923-11 CERAMIC CHIP 47PF 5% 50V C826 1-162-927-11 CERAMIC CHIP 100PF 5% 50V
C503 1-162-962-11 CERAMIC CHIP 470PF 10% 50V C827 1-162-927-11 CERAMIC CHIP 100PF 5% 50V

C504 1-162-962-11 CERAMIC CHIP 470PF 10% 50V C828 1-162-927-11 CERAMIC CHIP 100PF 5% 50V
C505 1-165-176-11 CERAMIC CHIP 0.047uF 10% 16V C829 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V
C506 1-165-176-11 CERAMIC CHIP 0.047uF 10% 16V C830 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V
C507 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C831 1-117-863-11 CERAMIC CHIP 0.47uF 10% 6.3V
C508 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C832 1-117-863-11 CERAMIC CHIP 0.47uF 10% 6.3V

C509 1-126-966-11 ELECT 33uF 20% 50V C833 1-117-863-11 CERAMIC CHIP 0.47uF 10% 6.3V
C510 1-126-966-11 ELECT 33uF 20% 50V C834 1-126-923-91 ELECT 220uF 20% 10V
C511 1-162-962-11 CERAMIC CHIP 470PF 10% 50V C835 1-115-467-11 CERAMIC CHIP 0.22uF 10% 10V
C512 1-162-962-11 CERAMIC CHIP 470PF 10% 50V C836 1-115-467-11 CERAMIC CHIP 0.22uF 10% 10V
C513 1-162-964-11 CERAMIC CHIP 0.001uF 10% 50V C838 1-100-566-91 CERAMIC CHIP 0.1uF 10% 25V

C514 1-162-964-11 CERAMIC CHIP 0.001uF 10% 50V C839 1-100-566-91 CERAMIC CHIP 0.1uF 10% 25V
C515 1-162-923-11 CERAMIC CHIP 47PF 5% 50V C840 1-117-863-11 CERAMIC CHIP 0.47uF 10% 6.3V
C518 1-164-156-11 CERAMIC CHIP 0.1uF 25V C841 1-126-965-91 ELECT 22uF 20% 50V
C519 1-164-156-11 CERAMIC CHIP 0.1uF 25V C843 1-162-960-11 CERAMIC CHIP 220PF 10% 50V
C522 1-162-927-11 CERAMIC CHIP 100PF 5% 50V (EXCEPT UK, RU)
C847 1-162-968-11 CERAMIC CHIP 0.0047uF 10% 50V
C523 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V (EXCEPT CND)
C524 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V
C525 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C847 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V
C526 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V (CND)
C527 1-162-964-11 CERAMIC CHIP 0.001uF 10% 50V C848 1-162-968-11 CERAMIC CHIP 0.0047uF 10% 50V
(EXCEPT CND)
C528 1-162-964-11 CERAMIC CHIP 0.001uF 10% 50V C848 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V
C529 1-162-927-11 CERAMIC CHIP 100PF 5% 50V (CND)
C531 1-162-964-11 CERAMIC CHIP 0.001uF 10% 50V C851 1-165-176-11 CERAMIC CHIP 0.047uF 10% 16V
C532 1-162-964-11 CERAMIC CHIP 0.001uF 10% 50V C852 1-162-915-11 CERAMIC CHIP 10PF 0.5PF 50V
C533 1-100-566-91 CERAMIC CHIP 0.1uF 10% 25V
C853 1-164-227-11 CERAMIC CHIP 0.022uF 10% 25V
C534 1-100-566-91 CERAMIC CHIP 0.1uF 10% 25V C854 1-162-915-11 CERAMIC CHIP 10PF 0.5PF 50V
C535 1-100-566-91 CERAMIC CHIP 0.1uF 10% 25V C855 1-162-962-11 CERAMIC CHIP 470PF 10% 50V
C543 1-162-964-11 CERAMIC CHIP 0.001uF 10% 50V C856 1-162-910-11 CERAMIC CHIP 5PF 0.25PF 50V

Note: Refer to supplement-1 for MAIN board (Brazilian, Thai models).

33
HCD-EH15
Ver. 1.1
MAIN

Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark
C861 1-100-566-91 CERAMIC CHIP 0.1uF 10% 25V (UK) < JACK/TERMINAL BOARD >

C862 1-100-566-91 CERAMIC CHIP 0.1uF 10% 25V (UK) J101 1-780-314-11 TERMINAL BOARD (SPEAKER)
C863 1-126-965-91 ELECT 22uF 20% 50V (UK) J102 1-815-629-11 JACK (PHONES)
C864 1-162-962-11 CERAMIC CHIP 470PF 10% 50V (UK) J105 1-566-822-51 JACK (AUDIO IN)
C865 1-126-965-91 ELECT 22uF 20% 50V (UK)
C866 1-162-962-11 CERAMIC CHIP 470PF 10% 50V (UK) < JUMPER RESISTOR >

C867 1-162-962-11 CERAMIC CHIP 470PF 10% 50V (UK) JR101 1-216-864-11 SHORT CHIP 0 (KR)
C868 1-162-925-11 CERAMIC CHIP 68PF 5% 50V (UK) JR102 1-216-864-11 SHORT CHIP 0 (MX, TW)
C869 1-162-923-11 CERAMIC CHIP 47PF 5% 50V (UK) JR103 1-216-864-11 SHORT CHIP 0 (AR, AUS)
C873 1-162-907-11 CERAMIC CHIP 2PF 0.25PF 50V JR104 1-216-864-11 SHORT CHIP 0 (E51, SP)
JR105 1-216-864-11 SHORT CHIP 0 (CND)
< FILTER/CAPACITOR >
JR106 1-216-864-11 SHORT CHIP 0 (UK)
CF801 1-795-426-11 FILTER, CERAMIC JR107 1-216-864-11 SHORT CHIP 0 (RU)
CF802 1-128-821-51 CERAMIC 1000PF 5% 50V JR401 1-216-864-11 SHORT CHIP 0
(EXCEPT UK, RU) JR402 1-216-864-11 SHORT CHIP 0
CF802 1-579-554-21 FILTER, CERAMIC (UK, RU) JR403 1-216-864-11 SHORT CHIP 0
CF803 1-781-962-21 FILTER, CERAMIC
JR404 1-216-864-11 SHORT CHIP 0
< CONNECTOR > JR801 1-216-864-11 SHORT CHIP 0
JR802 1-216-864-11 SHORT CHIP 0
CN105 1-784-778-11 CONNECTOR, FFC 17P JR803 1-216-864-11 SHORT CHIP 0
CN106 1-784-766-11 CONNECTOR, FFC 5P (EXCEPT UK) JR861 1-216-864-11 SHORT CHIP 0 (UK)
CN106 1-568-826-11 CONNECTOR, FFC 7P (UK)
CNP501 1-815-445-11 PIN, CONNECTOR (PWB) 4P < RESISTOR >
CNP502 1-815-444-11 PIN, CONNECTOR (PWB) 3P
JW137 1-249-385-11 CARBON 2.2 5% 1/4W
* CNP802 1-506-680-11 PLUG, CONNECTOR (2.5mm) 3P (CND)
(ANTENNA FM/AM)
< COIL/FERRITE BEAD >
< DIODE >
L103 1-469-152-11 FERRITE, EMI (SMD) (2012)
D106 6-501-172-01 DIODE UDZW-TE17-8.2B L104 1-410-509-11 INDUCTOR 10uH
D107 6-502-411-01 DIODE RL202-B322-1 L501 1-456-094-11 TRANSFORMER, BIAS OSCILLATION
D108 6-502-411-01 DIODE RL202-B322-1 L803 1-433-741-11 TRANSFORMER, IF
D109 6-502-411-01 DIODE RL202-B322-1 L804 1-457-163-22 COIL, AIR-CORE
D110 6-502-411-01 DIODE RL202-B322-1
L805 1-457-162-22 COIL, AIR-CORE
D111 6-501-582-01 DIODE 1N4002-B5 L806 1-457-168-11 COIL, DET
D112 6-501-582-01 DIODE 1N4002-B5 (E51, SP) L851 1-457-161-11 COIL, AM ANTENNA
D113 6-501-582-01 DIODE 1N4002-B5 L852 1-456-596-11 COIL, MW OSC
D114 6-501-582-01 DIODE 1N4002-B5 (E51, SP)
D131 6-500-334-01 DIODE MC2836-T112-1 < TRANSISTOR >

D193 6-500-335-01 DIODE MC2838-T112-1 Q101 8-729-024-93 TRANSISTOR 2SB1565E

D371 6-500-335-01 DIODE MC2838-T112-1 Q102 8-729-120-28 TRANSISTOR 2SC1623-L5L6
D372 6-500-335-01 DIODE MC2838-T112-1 Q103 8-729-120-28 TRANSISTOR 2SC1623-L5L6
D802 6-501-369-01 DIODE SVC230-TB-E Q121 8-729-120-28 TRANSISTOR 2SC1623-L5L6
D803 6-501-369-01 DIODE SVC230-TB-E Q122 8-729-120-28 TRANSISTOR 2SC1623-L5L6

D812 6-501-579-01 DIODE MC2837 Q123 8-729-120-28 TRANSISTOR 2SC1623-L5L6

D813 6-501-579-01 DIODE MC2837 Q191 8-729-036-86 TRANSISTOR KTC3203Y-AT
D815 6-501-579-01 DIODE MC2837 Q192 8-729-036-86 TRANSISTOR KTC3203Y-AT
D851 6-501-142-01 DIODE SVC347A-TL-E Q193 6-551-696-01 TRANSISTOR ISA1235AC1TP-1EF
Q194 8-729-037-13 TRANSISTOR KTA1271Y
< FERRITE BEAD >
Q195 8-729-120-28 TRANSISTOR 2SC1623-L5L6
FB101 1-469-152-11 FERRITE, EMI (SMD) (2012) Q351 6-551-703-01 FET 2SJ599-ZK-E1-AZ
FB102 1-469-152-11 FERRITE, EMI (SMD) (2012) Q352 8-729-120-28 TRANSISTOR 2SC1623-L5L6
FB103 1-469-152-11 FERRITE, EMI (SMD) (2012) Q371 6-551-696-01 TRANSISTOR ISA1235AC1TP-1EF
Q372 8-729-120-28 TRANSISTOR 2SC1623-L5L6
< IC >
Q507 8-729-120-28 TRANSISTOR 2SC1623-L5L6
IC101 6-710-863-01 IC TK70540SCL-G Q801 8-729-120-28 TRANSISTOR 2SC1623-L5L6
IC301 6-706-641-01 IC LA4631-E Q802 8-729-120-28 TRANSISTOR 2SC1623-L5L6
IC401 6-702-895-01 IC BD3881FV Q803 6-550-304-01 TRANSISTOR 2SC5477-T122-1
IC801 6-708-840-01 IC LV23003VA Q861 8-729-120-28 TRANSISTOR 2SC1623-L5L6 (UK)
IC861 6-708-918-01 IC PT2579SN (UK)
Q862 8-729-120-28 TRANSISTOR 2SC1623-L5L6 (UK)

Note: Refer to supplement-1 for MAIN board (Brazilian, Thai models).

34
 HCD-EH15
Ver. 1.1
MAIN

Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark
< RESISTOR > R340 1-216-809-11 METAL CHIP 100 5% 1/10W
R351 1-216-833-11 METAL CHIP 10K 5% 1/10W
R101 1-216-833-11 METAL CHIP 10K 5% 1/10W R352 1-216-825-11 METAL CHIP 2.2K 5% 1/10W
R102 1-216-809-11 METAL CHIP 100 5% 1/10W
R103 1-216-841-11 METAL CHIP 47K 5% 1/10W R353 1-216-833-11 METAL CHIP 10K 5% 1/10W
R104 1-216-845-11 METAL CHIP 100K 5% 1/10W R354 1-216-833-11 METAL CHIP 10K 5% 1/10W
R105 1-216-845-11 METAL CHIP 100K 5% 1/10W R355 1-216-833-11 METAL CHIP 10K 5% 1/10W
R356 1-216-837-11 METAL CHIP 22K 5% 1/10W
R106 1-216-836-11 METAL CHIP 18K 5% 1/10W R365 1-216-825-11 METAL CHIP 2.2K 5% 1/10W
R107 1-216-817-11 METAL CHIP 470 5% 1/10W
R108 1-216-809-11 METAL CHIP 100 5% 1/10W R371 1-218-446-11 METAL CHIP 1 5% 1/10W
R109 1-216-817-11 METAL CHIP 470 5% 1/10W R372 1-218-446-11 METAL CHIP 1 5% 1/10W
R110 1-216-845-11 METAL CHIP 100K 5% 1/10W R373 1-218-446-11 METAL CHIP 1 5% 1/10W
R111 1-216-853-11 METAL CHIP 470K 5% 1/10W R374 1-218-446-11 METAL CHIP 1 5% 1/10W
R375 1-218-446-11 METAL CHIP 1 5% 1/10W
R112 1-216-853-11 METAL CHIP 470K 5% 1/10W
R113 1-216-829-11 METAL CHIP 4.7K 5% 1/10W R376 1-218-446-11 METAL CHIP 1 5% 1/10W
R114 1-216-829-11 METAL CHIP 4.7K 5% 1/10W R377 1-218-446-11 METAL CHIP 1 5% 1/10W
R115 1-249-409-11 CARBON 220 5% 1/4W R378 1-218-446-11 METAL CHIP 1 5% 1/10W
R116 1-249-409-11 CARBON 220 5% 1/4W R379 1-218-446-11 METAL CHIP 1 5% 1/10W
R117 1-249-409-11 CARBON 220 5% 1/4W R380 1-218-446-11 METAL CHIP 1 5% 1/10W

R118 1-249-409-11 CARBON 220 5% 1/4W R381 1-216-833-11 METAL CHIP 10K 5% 1/10W
R119 1-216-825-11 METAL CHIP 2.2K 5% 1/10W R382 1-216-833-11 METAL CHIP 10K 5% 1/10W
R120 1-216-825-11 METAL CHIP 2.2K 5% 1/10W R383 1-216-833-11 METAL CHIP 10K 5% 1/10W
R121 1-216-849-11 METAL CHIP 220K 5% 1/10W R384 1-216-821-11 METAL CHIP 1K 5% 1/10W
R123 1-216-853-11 METAL CHIP 470K 5% 1/10W R402 1-216-809-11 METAL CHIP 100 5% 1/10W

R124 1-216-809-11 METAL CHIP 100 5% 1/10W R403 1-216-821-11 METAL CHIP 1K 5% 1/10W
R125 1-216-829-11 METAL CHIP 4.7K 5% 1/10W R404 1-216-813-11 METAL CHIP 220 5% 1/10W
R126 1-216-841-11 METAL CHIP 47K 5% 1/10W R405 1-216-864-11 SHORT CHIP 0
R127 1-216-841-11 METAL CHIP 47K 5% 1/10W R406 1-216-821-11 METAL CHIP 1K 5% 1/10W
R128 1-216-813-11 METAL CHIP 220 5% 1/10W R410 1-216-845-11 METAL CHIP 100K 5% 1/10W

R129 1-216-813-11 METAL CHIP 220 5% 1/10W R411 1-216-821-11 METAL CHIP 1K 5% 1/10W
R130 1-216-813-11 METAL CHIP 220 5% 1/10W R412 1-216-813-11 METAL CHIP 220 5% 1/10W
R131 1-216-813-11 METAL CHIP 220 5% 1/10W R419 1-216-839-11 METAL CHIP 33K 5% 1/10W
R151 1-216-833-11 METAL CHIP 10K 5% 1/10W R420 1-216-839-11 METAL CHIP 33K 5% 1/10W
R152 1-216-833-11 METAL CHIP 10K 5% 1/10W R423 1-216-829-11 METAL CHIP 4.7K 5% 1/10W

R175 1-216-845-11 METAL CHIP 100K 5% 1/10W R424 1-216-829-11 METAL CHIP 4.7K 5% 1/10W
R176 1-216-845-11 METAL CHIP 100K 5% 1/10W R425 1-216-829-11 METAL CHIP 4.7K 5% 1/10W
R177 1-216-845-11 METAL CHIP 100K 5% 1/10W R426 1-216-829-11 METAL CHIP 4.7K 5% 1/10W
R178 1-216-833-11 METAL CHIP 10K 5% 1/10W R427 1-216-845-11 METAL CHIP 100K 5% 1/10W
R179 1-216-833-11 METAL CHIP 10K 5% 1/10W R428 1-216-845-11 METAL CHIP 100K 5% 1/10W

R181 1-216-797-11 METAL CHIP 10 5% 1/10W R429 1-216-829-11 METAL CHIP 4.7K 5% 1/10W
R182 1-216-797-11 METAL CHIP 10 5% 1/10W R430 1-216-829-11 METAL CHIP 4.7K 5% 1/10W
R185 1-247-807-31 CARBON 100 5% 1/4W R433 1-216-837-11 METAL CHIP 22K 5% 1/10W
R186 1-247-807-31 CARBON 100 5% 1/4W R434 1-216-837-11 METAL CHIP 22K 5% 1/10W
R187 1-247-807-31 CARBON 100 5% 1/4W R439 1-216-829-11 METAL CHIP 4.7K 5% 1/10W

R188 1-216-837-11 METAL CHIP 22K 5% 1/10W R440 1-216-829-11 METAL CHIP 4.7K 5% 1/10W
R189 1-216-837-11 METAL CHIP 22K 5% 1/10W R441 1-216-841-11 METAL CHIP 47K 5% 1/10W
R192 1-216-845-11 METAL CHIP 100K 5% 1/10W R442 1-216-841-11 METAL CHIP 47K 5% 1/10W
R195 1-216-809-11 METAL CHIP 100 5% 1/10W R501 1-216-809-11 METAL CHIP 100 5% 1/10W
R196 1-216-809-11 METAL CHIP 100 5% 1/10W R502 1-216-809-11 METAL CHIP 100 5% 1/10W

R197 1-247-807-31 CARBON 100 5% 1/4W R503 1-216-829-11 METAL CHIP 4.7K 5% 1/10W
R198 1-247-807-31 CARBON 100 5% 1/4W R504 1-216-829-11 METAL CHIP 4.7K 5% 1/10W
R199 1-247-807-31 CARBON 100 5% 1/4W R505 1-216-833-11 METAL CHIP 10K 5% 1/10W
R301 1-216-837-11 METAL CHIP 22K 5% 1/10W R506 1-216-833-11 METAL CHIP 10K 5% 1/10W
R302 1-216-837-11 METAL CHIP 22K 5% 1/10W R507 1-216-825-11 METAL CHIP 2.2K 5% 1/10W

R303 1-216-825-11 METAL CHIP 2.2K 5% 1/10W R508 1-216-825-11 METAL CHIP 2.2K 5% 1/10W
R304 1-216-825-11 METAL CHIP 2.2K 5% 1/10W R509 1-216-853-11 METAL CHIP 470K 5% 1/10W
R305 1-216-829-11 METAL CHIP 4.7K 5% 1/10W R510 1-216-853-11 METAL CHIP 470K 5% 1/10W
R306 1-216-829-11 METAL CHIP 4.7K 5% 1/10W R511 1-216-861-11 METAL CHIP 2.2M 5% 1/10W
R307 1-216-837-11 METAL CHIP 22K 5% 1/10W R512 1-216-861-11 METAL CHIP 2.2M 5% 1/10W

R308 1-216-837-11 METAL CHIP 22K 5% 1/10W R513 1-216-809-11 METAL CHIP 100 5% 1/10W
R339 1-216-809-11 METAL CHIP 100 5% 1/10W R514 1-216-809-11 METAL CHIP 100 5% 1/10W

Note: Refer to supplement-1 for MAIN board (Brazilian, Thai models).

35
HCD-EH15
Ver. 1.1
MAIN

Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark
R515 1-216-805-11 METAL CHIP 47 5% 1/10W R828 1-216-805-11 METAL CHIP 47 5% 1/10W
R516 1-216-805-11 METAL CHIP 47 5% 1/10W (EXCEPT UK, RU)
R517 1-216-845-11 METAL CHIP 100K 5% 1/10W R829 1-216-845-11 METAL CHIP 100K 5% 1/10W
R830 1-216-841-11 METAL CHIP 47K 5% 1/10W
R518 1-216-845-11 METAL CHIP 100K 5% 1/10W R831 1-216-813-11 METAL CHIP 220 5% 1/10W
R519 1-216-839-11 METAL CHIP 33K 5% 1/10W
R520 1-216-839-11 METAL CHIP 33K 5% 1/10W R833 1-216-833-11 METAL CHIP 10K 5% 1/10W
R521 1-216-837-11 METAL CHIP 22K 5% 1/10W R834 1-216-837-11 METAL CHIP 22K 5% 1/10W
R522 1-216-837-11 METAL CHIP 22K 5% 1/10W R835 1-216-829-11 METAL CHIP 4.7K 5% 1/10W
R836 1-216-833-11 METAL CHIP 10K 5% 1/10W
R523 1-216-829-11 METAL CHIP 4.7K 5% 1/10W R837 1-216-821-11 METAL CHIP 1K 5% 1/10W
R524 1-216-829-11 METAL CHIP 4.7K 5% 1/10W
R525 1-216-833-11 METAL CHIP 10K 5% 1/10W R838 1-216-821-11 METAL CHIP 1K 5% 1/10W
R526 1-216-833-11 METAL CHIP 10K 5% 1/10W R839 1-216-809-11 METAL CHIP 100 5% 1/10W
R527 1-216-829-11 METAL CHIP 4.7K 5% 1/10W R840 1-216-837-11 METAL CHIP 22K 5% 1/10W
R841 1-216-809-11 METAL CHIP 100 5% 1/10W
R528 1-216-829-11 METAL CHIP 4.7K 5% 1/10W R842 1-216-841-11 METAL CHIP 47K 5% 1/10W
R529 1-216-825-11 METAL CHIP 2.2K 5% 1/10W
R530 1-216-825-11 METAL CHIP 2.2K 5% 1/10W R843 1-216-853-11 METAL CHIP 470K 5% 1/10W
R531 1-216-829-11 METAL CHIP 4.7K 5% 1/10W R844 1-216-797-11 METAL CHIP 10 5% 1/10W
R532 1-216-829-11 METAL CHIP 4.7K 5% 1/10W R845 1-216-801-11 METAL CHIP 22 5% 1/10W
R846 1-216-825-11 METAL CHIP 2.2K 5% 1/10W
R533 1-216-833-11 METAL CHIP 10K 5% 1/10W R847 1-216-801-11 METAL CHIP 22 5% 1/10W
R534 1-216-833-11 METAL CHIP 10K 5% 1/10W
R535 1-216-813-11 METAL CHIP 220 5% 1/10W R848 1-216-821-11 METAL CHIP 1K 5% 1/10W
R536 1-216-813-11 METAL CHIP 220 5% 1/10W R849 1-216-837-11 METAL CHIP 22K 5% 1/10W
R541 1-216-837-11 METAL CHIP 22K 5% 1/10W R850 1-216-825-11 METAL CHIP 2.2K 5% 1/10W
R851 1-216-837-11 METAL CHIP 22K 5% 1/10W
R542 1-216-833-11 METAL CHIP 10K 5% 1/10W R853 1-216-845-11 METAL CHIP 100K 5% 1/10W
R543 1-216-829-11 METAL CHIP 4.7K 5% 1/10W
R544 1-216-829-11 METAL CHIP 4.7K 5% 1/10W R856 1-216-841-11 METAL CHIP 47K 5% 1/10W
R545 1-216-829-11 METAL CHIP 4.7K 5% 1/10W (UK)
R560 1-216-821-11 METAL CHIP 1K 5% 1/10W R857 1-216-841-11 METAL CHIP 47K 5% 1/10W
(UK)
R561 1-216-837-11 METAL CHIP 22K 5% 1/10W R859 1-216-821-11 METAL CHIP 1K 5% 1/10W
R564 1-216-793-11 METAL CHIP 4.7 5% 1/10W (UK, RU)
R565 1-216-793-11 METAL CHIP 4.7 5% 1/10W R859 1-216-837-11 METAL CHIP 22K 5% 1/10W
R801 1-216-825-11 METAL CHIP 2.2K 5% 1/10W (EXCEPT UK, RU)
R802 1-216-797-11 METAL CHIP 10 5% 1/10W R860 1-216-821-11 METAL CHIP 1K 5% 1/10W
(UK, RU)
R803 1-216-797-11 METAL CHIP 10 5% 1/10W
R804 1-216-864-11 SHORT CHIP 0 R860 1-216-837-11 METAL CHIP 22K 5% 1/10W
R805 1-216-845-11 METAL CHIP 100K 5% 1/10W (EXCEPT UK, RU)
R806 1-216-864-11 SHORT CHIP 0 R861 1-216-833-11 METAL CHIP 10K 5% 1/10W
R807 1-216-845-11 METAL CHIP 100K 5% 1/10W (UK)
R863 1-216-837-11 METAL CHIP 22K 5% 1/10W
R808 1-216-833-11 METAL CHIP 10K 5% 1/10W R864 1-216-833-11 METAL CHIP 10K 5% 1/10W
R809 1-216-821-11 METAL CHIP 1K 5% 1/10W (UK)
R810 1-216-857-11 METAL CHIP 1M 5% 1/10W
R811 1-216-829-11 METAL CHIP 4.7K 5% 1/10W R866 1-216-833-11 METAL CHIP 10K 5% 1/10W
R812 1-216-817-11 METAL CHIP 470 5% 1/10W (UK)
R867 1-216-833-11 METAL CHIP 10K 5% 1/10W
R813 1-216-833-11 METAL CHIP 10K 5% 1/10W (UK)
R814 1-216-809-11 METAL CHIP 100 5% 1/10W R868 1-216-833-11 METAL CHIP 10K 5% 1/10W
R815 1-216-829-11 METAL CHIP 4.7K 5% 1/10W (UK)
R816 1-216-833-11 METAL CHIP 10K 5% 1/10W R869 1-216-833-11 METAL CHIP 10K 5% 1/10W
R817 1-216-833-11 METAL CHIP 10K 5% 1/10W (UK)

R818 1-216-841-11 METAL CHIP 47K 5% 1/10W R870 1-216-853-11 METAL CHIP 470K 5% 1/10W
R819 1-216-841-11 METAL CHIP 47K 5% 1/10W (UK)
R820 1-216-833-11 METAL CHIP 10K 5% 1/10W R871 1-216-849-11 METAL CHIP 220K 5% 1/10W
R821 1-216-813-11 METAL CHIP 220 5% 1/10W (UK)
R822 1-216-825-11 METAL CHIP 2.2K 5% 1/10W R872 1-216-813-11 METAL CHIP 220 5% 1/10W
(UK)
R823 1-216-809-11 METAL CHIP 100 5% 1/10W R873 1-216-825-11 METAL CHIP 2.2K 5% 1/10W
R824 1-216-825-11 METAL CHIP 2.2K 5% 1/10W (UK)
R825 1-216-817-11 METAL CHIP 470 5% 1/10W R874 1-216-845-11 METAL CHIP 100K 5% 1/10W
R826 1-216-809-11 METAL CHIP 100 5% 1/10W (UK)
R827 1-216-809-11 METAL CHIP 100 5% 1/10W
R875 1-216-845-11 METAL CHIP 100K 5% 1/10W
R828 1-216-801-11 METAL CHIP 22 5% 1/10W (UK)
(UK, RU)

Note: Refer to supplement-1 for MAIN board (Brazilian, Thai models).

36
 HCD-EH15
Ver. 1.1
MAIN PANEL

Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark
R876 1-216-841-11 METAL CHIP 47K 5% 1/10W
(UK) < IC >

< SWITCH > IC701 A-1545-973-A IC MB90F830PF-GE1 (for SERVICE)

IC703 6-600-349-31 IC NJL24H400A
SW501 1-762-369-11 SWITCH, SLIDE (REC/PB)
< JUMPER RESISTOR >
< VIBRATOR >
JR704 1-216-864-11 SHORT CHIP 0
X801 1-767-388-21 VIBRATOR, CRYSTAL (75kHz) (EXCEPT UK, RU) JR705 1-216-864-11 SHORT CHIP 0
X801 1-795-926-11 VIBRATOR, CRYSTAL (75kHz) (UK, RU) JR706 1-216-864-11 SHORT CHIP 0
X861 1-579-900-21 VIBRATOR, CRYSTAL (4.332MHz) (UK) JR707 1-216-864-11 SHORT CHIP 0
************************************************************* JR708 1-216-864-11 SHORT CHIP 0

A-1508-455-A PANEL BOARD, COMPLETE (UK) JR709 1-216-864-11 SHORT CHIP 0

A-1508-530-A PANEL BOARD, COMPLETE (CND, BR) JR710 1-216-864-11 SHORT CHIP 0
A-1508-558-A PANEL BOARD, COMPLETE (SP, TW, KR, TH) JR713 1-216-864-11 SHORT CHIP 0
A-1508-593-A PANEL BOARD, COMPLETE (E51, MX, AR) JR714 1-216-864-11 SHORT CHIP 0
A-1527-693-A PANEL BOARD, COMPLETE (AUS) JR719 1-216-864-11 SHORT CHIP 0

A-1542-781-A PANEL BOARD, COMPLETE (RU) JR722 1-216-864-11 SHORT CHIP 0

********************** JR723 1-216-864-11 SHORT CHIP 0
JR743 1-216-864-11 SHORT CHIP 0
2-636-531-01 HOLDER (LCD) JR744 1-216-864-11 SHORT CHIP 0
2-636-532-01 ILLUMINATOR (LCD) JR747 1-216-864-11 SHORT CHIP 0
2-636-545-01 SHEET (LCD)
JR748 1-216-864-11 SHORT CHIP 0
< CAPACITOR > JR749 1-216-864-11 SHORT CHIP 0
JR750 1-216-864-11 SHORT CHIP 0
C701 1-164-156-11 CERAMIC CHIP 0.1uF 25V JR751 1-216-864-11 SHORT CHIP 0
C702 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V JR752 1-216-864-11 SHORT CHIP 0
C704 1-126-518-11 ELECT 470uF 20% 4V
C706 1-164-156-11 CERAMIC CHIP 0.1uF 25V JR755 1-216-864-11 SHORT CHIP 0
C707 1-162-964-11 CERAMIC CHIP 0.001uF 10% 50V JR756 1-216-864-11 SHORT CHIP 0
JR757 1-216-864-11 SHORT CHIP 0
C710 1-165-908-11 CERAMIC CHIP 1uF 10% 10V JR760 1-216-864-11 SHORT CHIP 0
C711 1-164-156-11 CERAMIC CHIP 0.1uF 25V JR762 1-216-864-11 SHORT CHIP 0
C712 1-164-156-11 CERAMIC CHIP 0.1uF 25V
C716 1-164-156-11 CERAMIC CHIP 0.1uF 25V JR763 1-216-864-11 SHORT CHIP 0
C719 1-165-176-11 CERAMIC CHIP 0.047uF 10% 16V JR775 1-216-864-11 SHORT CHIP 0
JR788 1-216-864-11 SHORT CHIP 0
C721 1-162-971-11 CERAMIC CHIP 0.001uF 10% 50V JR789 1-216-864-11 SHORT CHIP 0
C722 1-162-971-11 CERAMIC CHIP 0.001uF 10% 50V L701 1-216-864-11 SHORT CHIP 0
C723 1-162-971-11 CERAMIC CHIP 0.001uF 10% 50V
C724 1-113-905-11 CERAMIC 220PF 10% 250V L702 1-216-864-11 SHORT CHIP 0
C725 1-126-382-11 ELECT 100uF 20% 16V
< LIQUID CRYSTAL DISPLAY >
C726 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V
C727 1-162-923-11 CERAMIC CHIP 47PF 5% 50V LCD702 1-802-381-11 DISPLAY PANEL, LIQUID CRYSTAL
C728 1-162-923-11 CERAMIC CHIP 47PF 5% 50V
C729 1-162-964-11 CERAMIC CHIP 0.001uF 10% 50V < LED >
C731 1-164-156-11 CERAMIC CHIP 0.1uF 25V
LED701 6-502-498-01 LED SELU2B10A-SLF62FGH
C732 1-162-918-11 CERAMIC CHIP 18PF 5% 50V (LCD BACK LIGHT)
C733 1-162-919-11 CERAMIC CHIP 22PF 5% 50V LED702 6-501-452-01 LED 1L4345V22DOTDT02 (STANDBY)

< CONNECTOR > < TRANSISTOR >

CNP701 1-779-289-11 CONNECTOR, FFC (LIF (NON-ZIF)) 21P Q701 6-551-696-01 TRANSISTOR ISA1235AC1TP-1EF
CNP703 1-784-727-11 CONNECTOR, FFC 5P (EXCEPT UK) Q702 8-729-120-28 TRANSISTOR 2SC1623-L5L6
CNP703 1-568-850-11 CONNECTOR, FFC 7P (UK) Q703 8-729-120-28 TRANSISTOR 2SC1623-L5L6
CNP706 1-784-778-11 CONNECTOR, FFC 17P Q704 8-729-038-28 TRANSISTOR RT1N441C-TP-1
Q705 8-729-120-28 TRANSISTOR 2SC1623-L5L6
< DIODE >
Q706 8-729-120-28 TRANSISTOR 2SC1623-L5L6
D701 6-501-163-01 DIODE UDZW-TE17-3.6B Q707 8-729-120-28 TRANSISTOR 2SC1623-L5L6
D702 6-500-334-01 DIODE MC2836-T112-1 Q713 8-729-038-28 TRANSISTOR RT1N441C-TP-1
D801 6-501-582-01 DIODE 1N4002-B5 Q714 6-551-696-01 TRANSISTOR ISA1235AC1TP-1EF
D804 6-501-582-01 DIODE 1N4002-B5
< RESISTOR >

R701 1-216-817-11 METAL CHIP 470 5% 1/10W

Note: Refer to supplement-1 for MAIN board (Brazilian, Thai models).

37
HCD-EH15
Ver. 1.1
PANEL

Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark
R702 1-216-821-11 METAL CHIP 1K 5% 1/10W R781 1-216-813-11 METAL CHIP 220 5% 1/10W
R703 1-216-821-11 METAL CHIP 1K 5% 1/10W (RU)
R704 1-216-821-11 METAL CHIP 1K 5% 1/10W R781 1-216-817-11 METAL CHIP 470 5% 1/10W
R705 1-216-821-11 METAL CHIP 1K 5% 1/10W (E51, MX, AR)
R781 1-216-821-11 METAL CHIP 1K 5% 1/10W
R706 1-216-821-11 METAL CHIP 1K 5% 1/10W (CND, BR)
R707 1-216-821-11 METAL CHIP 1K 5% 1/10W R781 1-216-829-11 METAL CHIP 4.7K 5% 1/10W
R708 1-216-821-11 METAL CHIP 1K 5% 1/10W (AUS)
R709 1-216-821-11 METAL CHIP 1K 5% 1/10W
R710 1-216-821-11 METAL CHIP 1K 5% 1/10W R781 1-216-864-11 SHORT CHIP 0 (UK)
R782 1-216-829-11 METAL CHIP 4.7K 5% 1/10W
R711 1-216-821-11 METAL CHIP 1K 5% 1/10W (CND, E51, MX, BR, AR, AUS, RU)
R713 1-216-833-11 METAL CHIP 10K 5% 1/10W R782 1-216-864-11 SHORT CHIP 0 (SP, TW, KR, TH)
R714 1-216-833-11 METAL CHIP 10K 5% 1/10W R783 1-216-864-11 SHORT CHIP 0 (EXCEPT UK)
R718 1-216-821-11 METAL CHIP 1K 5% 1/10W R784 1-216-845-11 METAL CHIP 100K 5% 1/10W
R719 1-216-821-11 METAL CHIP 1K 5% 1/10W
R785 1-216-833-11 METAL CHIP 10K 5% 1/10W
R720 1-216-821-11 METAL CHIP 1K 5% 1/10W R787 1-216-841-11 METAL CHIP 47K 5% 1/10W
R721 1-216-817-11 METAL CHIP 470 5% 1/10W R788 1-216-821-11 METAL CHIP 1K 5% 1/10W
R722 1-216-821-11 METAL CHIP 1K 5% 1/10W R789 1-216-821-11 METAL CHIP 1K 5% 1/10W
R723 1-216-817-11 METAL CHIP 470 5% 1/10W R790 1-216-821-11 METAL CHIP 1K 5% 1/10W
R727 1-216-821-11 METAL CHIP 1K 5% 1/10W
R791 1-216-821-11 METAL CHIP 1K 5% 1/10W
R728 1-216-833-11 METAL CHIP 10K 5% 1/10W R792 1-216-833-11 METAL CHIP 10K 5% 1/10W
R730 1-216-821-11 METAL CHIP 1K 5% 1/10W R793 1-216-833-11 METAL CHIP 10K 5% 1/10W
R732 1-216-841-11 METAL CHIP 47K 5% 1/10W R798 1-216-841-11 METAL CHIP 47K 5% 1/10W
R733 1-216-841-11 METAL CHIP 47K 5% 1/10W R799 1-216-845-11 METAL CHIP 100K 5% 1/10W
R734 1-216-821-11 METAL CHIP 1K 5% 1/10W
< SWITCH >
R736 1-216-821-11 METAL CHIP 1K 5% 1/10W
R738 1-216-833-11 METAL CHIP 10K 5% 1/10W SW700 1-478-642-11 ENCODER, ROTARY (VOLUME)
R739 1-216-833-11 METAL CHIP 10K 5% 1/10W SW701 1-762-875-21 SWITCH, KEYBOARD (TUNER/BAND)
R740 1-216-829-11 METAL CHIP 4.7K 5% 1/10W (CND, UK, BR, RU)
R741 1-216-829-11 METAL CHIP 4.7K 5% 1/10W SW701 1-771-410-21 SWITCH, TACTILE (TUNER/BAND)
(E51, MX, SP, TW, AR, KR, TH, AUS)
R742 1-216-821-11 METAL CHIP 1K 5% 1/10W SW702 1-762-875-21 SWITCH, KEYBOARD (CD u)
R743 1-216-821-11 METAL CHIP 1K 5% 1/10W (CND, UK, BR, RU)
R744 1-216-825-11 METAL CHIP 2.2K 5% 1/10W SW702 1-771-410-21 SWITCH, TACTILE (CD u)
R745 1-216-833-11 METAL CHIP 10K 5% 1/10W (E51, MX, SP, TW, AR, KR, TH, AUS)
R746 1-216-825-11 METAL CHIP 2.2K 5% 1/10W
SW703 1-762-875-21 SWITCH, KEYBOARD (TUNING +, M L)
R747 1-216-829-11 METAL CHIP 4.7K 5% 1/10W (CND, UK, BR, RU)
R748 1-216-841-11 METAL CHIP 47K 5% 1/10W SW703 1-771-410-21 SWITCH, TACTILE (TUNING +, M L)
R749 1-216-821-11 METAL CHIP 1K 5% 1/10W (E51, MX, SP, TW, AR, KR, TH, AUS)
R750 1-216-825-11 METAL CHIP 2.2K 5% 1/10W SW704 1-762-875-21 SWITCH, KEYBOARD (TUNING –, l m)
R751 1-216-821-11 METAL CHIP 1K 5% 1/10W (CND, UK, BR, RU)
SW704 1-771-410-21 SWITCH, TACTILE (TUNING –, l m)
R753 1-216-809-11 METAL CHIP 100 5% 1/10W (E51, MX, SP, TW, AR, KR, TH, AUS)
R754 1-216-833-11 METAL CHIP 10K 5% 1/10W SW705 1-762-875-21 SWITCH, KEYBOARD (I/1) (CND, UK, BR, RU)
R755 1-216-845-11 METAL CHIP 100K 5% 1/10W
R757 1-216-845-11 METAL CHIP 100K 5% 1/10W SW705 1-771-410-21 SWITCH, TACTILE (I/1)
R759 1-216-809-11 METAL CHIP 100 5% 1/10W (E51, MX, SP, TW, AR, KR, TH, AUS)
SW706 1-762-875-21 SWITCH, KEYBOARD (SELECT FOLDER –)
R760 1-216-845-11 METAL CHIP 100K 5% 1/10W (CND, UK, BR, RU)
R761 1-216-841-11 METAL CHIP 47K 5% 1/10W SW706 1-771-410-21 SWITCH, TACTILE (SELECT FOLDER –)
R762 1-216-825-11 METAL CHIP 2.2K 5% 1/10W (E51, MX, SP, TW, AR, KR, TH, AUS)
R763 1-216-837-11 METAL CHIP 22K 5% 1/10W SW707 1-762-875-21 SWITCH, KEYBOARD (SELECT FOLDER +)
R764 1-216-837-11 METAL CHIP 22K 5% 1/10W (CND, UK, BR, RU)
SW707 1-771-410-21 SWITCH, TACTILE (SELECT FOLDER +)
R765 1-216-829-11 METAL CHIP 4.7K 5% 1/10W (E51, MX, SP, TW, AR, KR, TH, AUS)
R766 1-216-797-11 METAL CHIP 10 5% 1/10W
R767 1-216-849-11 METAL CHIP 220K 5% 1/10W SW708 1-762-875-21 SWITCH, KEYBOARD (FUNCTION)
R768 1-216-805-11 METAL CHIP 47 5% 1/10W (CND, UK, BR, RU)
R770 1-216-841-11 METAL CHIP 47K 5% 1/10W SW708 1-771-410-21 SWITCH, TACTILE (FUNCTION)
(E51, MX, SP, TW, AR, KR, TH, AUS)
R771 1-216-840-11 METAL CHIP 39K 5% 1/10W SW710 1-762-875-21 SWITCH, KEYBOARD (x) (CND, UK, BR, RU)
R772 1-216-837-11 METAL CHIP 22K 5% 1/10W SW710 1-771-410-21 SWITCH, TACTILE (x)
R774 1-216-821-11 METAL CHIP 1K 5% 1/10W (E51, MX, SP, TW, AR, KR, TH, AUS)
R775 1-216-805-11 METAL CHIP 47 5% 1/10W SW711 1-762-875-21 SWITCH, KEYBOARD (DSGX) (CND, UK, BR, RU)
R777 1-216-805-11 METAL CHIP 47 5% 1/10W
SW711 1-771-410-21 SWITCH, TACTILE (DSGX)
R779 1-216-849-11 METAL CHIP 220K 5% 1/10W (E51, MX, SP, TW, AR, KR, TH, AUS)

38
 HCD-EH15
Ver. 1.1
PANEL PT-AC VOLTAGE-SEL

Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark
0 PT005 1-445-513-11
TRANSFORMER, POWER (BR)
< VIBRATOR > S201 1-771-853-11
SWITCH, DETECTION (LIMIT)
SW750 1-692-960-11
SWITCH, PUSH (1 KEY)
X701 1-814-067-11 OSCILLATOR, CRYSTAL (32.768kHz) (CD LID OPEN/CLOSE DETECT)
X702 1-813-940-11 PIEZOELECTRIC OSCILLATOR (5.53MHz) *************************************************************
*************************************************************
ACCESSORIES
PT-AC BOARD ************
************
0 1-569-008-22 ADAPTOR, CONVERSION 2P (E51, SP)
< CONNECTOR > 0 1-770-019-61 ADAPTOR, CONVERSION PLUG (UK)

CN002 1-819-131-11 PIN, CONNECTOR 3P

< FUSE HOLDER >

T003 1-533-233-31 FUSE HOLDER

T004 1-533-233-31 FUSE HOLDER
************************************************************

VOLTAGE-SEL BOARD (E51, BR, SP)

******************

< SWITCH >

0 S002 1-786-920-11 SWITCH, VOLTAGE SELECTION

(VOTAGE SELECTOR)

< FUSE HOLDER >

T005 1-533-233-31 FUSE HOLDER

T006 1-533-233-31 FUSE HOLDER
*************************************************************

MISCELLANEOUS
*************

0 4 1-769-079-51 CORD, POWER (KR)

0 4 1-775-790-81 CORD, POWER (AUS)
0 4 1-790-757-52 CORD, POWER (CND, MX)
0 4 1-827-597-81 CORD, POWER (TW)
0 4 1-830-891-11 CORD, POWER (E51, SP, RU)

0 4 1-832-228-11 CORD, POWER (AR)

0 4 1-833-218-21 POWER-SUPPLY CORD (BR)
0 4 1-834-697-12 CORD, POWER (TH)
0 4 1-835-069-11 CORD, POWER (UK)
71 A-1313-349-A MF-EH10 (TAPE MECHANISM DECK)

74 1-457-413-11 CORE, FERRITE (TW)

102 1-452-899-11 MAGNET
0 151 8-820-126-02 OPTICAL PICK-UP BLOCK (KSM-213CDP/C2NP)
(Including spindle motor (M401), sled motor (M402))
152 1-834-268-21 WIRE (FLAT TYPE) (16 CORE)
0 F001 1-532-275-33 FUSE (T160mAL/250V)
(UK, AR, KR, TH, AUS, RU)

0 F001 1-532-467-33 FUSE (T315mAL/250V)

(CND, E51, MX, BR, SP, TW)
0 F002 1-532-275-33 FUSE (T160mAL/250V) (E51, BR, SP)
FFC001 1-832-796-21 CABLE, FLEXIBLE FLAT (5 CORE) (RU)
FFC001 1-832-797-21 CABLE, FLEXIBLE FLAT (5 CORE)
(EXCEPT UK, RU)
FFC001 1-832-807-21 CABLE, FLEXIBLE FLAT (7 CORE) (UK)

FFC002 1-832-854-21 CABLE, FLEXIBLE FLAT (17 CORE)

FFC003 1-835-211-21 CABLE, FLEXIBLE FLAT
0 PT005 1-445-421-11 TRANSFORMER, POWER (AR, KR, TH)
0 PT005 1-445-422-11 TRANSFORMER, POWER (UK, RU)
0 PT005 1-445-423-11 TRANSFORMER, POWER (E51, SP, AUS)

0 PT005 1-445-424-11 TRANSFORMER, POWER (CND, MX, TW)

39
HCD-EH15

MEMO

40
 HCD-EH15
HCD-EH15

2. DIAGRAMS
THIS NOTE IS COMMON FOR PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAMS.
(In addition to this, the necessary note is printed in each block.)
For Printed Wiring Boards. For Schematic Diagrams.
Canadian Model Note: Note:
• X : Parts extracted from the component side. • All capacitors are in μF unless otherwise noted. (p: pF) 50
UK Model • Y : parts extracted from the conductor side. WV or less are not indicated except for electrolytics and

SERVICE MANUAL
• W : indicates side identified with part number. tantalums.
E Model • f : internal component. • All resistors are in Ω and 1/4 W or less unless otherwise
• : Pattern from the side which enables seeing. specified.
Australian Model (The other layers' patterns are not indicated.) • f : internal component.
• C : panel designation.
Ver. 1.1 2008.07 Russian Model • Indication of transistor.
• A : B+ Line.
C • H : adjustment for repair.
• Voltages are dc with respect to ground under no-signal
Q These are omitted. (detuned) conditions.
B E no mark : FM
[ ] : AM
( ): CD PLAY
< > : TAPE PLAY

SUPPLEMENT-1 B
Q

C E
{ }: REC
• Voltages are taken with VOM (Input impedance 10 MΩ).
Voltage variations may be noted due to normal production
File this supplement with the service manual. tolerances.
These are omitted.
• Signal path.
F : FM
Subject: Change of MAIN Board (Suffix-14/15) f : AM
J : CD PLAY
E : TAPE PLAY
: REC
In this set, MAIN board has been changed in the midway of production.
h : AUDIO IN
Printed wiring boards, schematic diagrams and electrical parts list of • Abbreviation
new type are described in this supplement-1. AR : Argentina model
Refer to original service manual for other information. AUS : Australian model
BR : Brazilian model
CND : Canadian model
E51 : Chilean and Peruvian model
KR : Korean model
1. NEW/FORMER DISCRIMINATION MX
RU
: Mexican model
: Russian model
– MAIN Board (Component Side) – SP : Singapore model
TH : Thai model
TW : Taiwan model

Former : 1-876-655-13
New : 1-876-655-14 or 1-876-655-15

9-889-094-81
HCD-EH15
1
 HCD-EH15

2-1. SCHEMATIC DIAGRAM - MAIN Board (1/2) -

(UK) R857
(1/2) L852
AM VT VOLTAGE
22k
JW837
L851 R856
AM TRACKING D851 22k
SVC347A C854 C855 L852
C852 10p 470p
AM OSC X861 4.332MHz
10p R871

10k
C868
D813 220k
68p C869
MC2837
47p

R867
CNP802 C851 R873
C853
3P 0.047 2.2k
0.022 JR861 C862
L851 0.1
ANTENNA R811 R812 R839 R814 0
FM/AM AM RF R851 R853 100k C856 5p 4.7k 470 100 100
JR804
22k
JW805 R805 C841 C834 0
R809 JW121 C816
(GND) 100k R808 22 220
1k (VT) 0.22
D812 BPF801 10k D803 R807 50V 10V
MC2837 SVC230 100k
R804
0 (EXCEPT UK,RU)
C843

C807
0.0022
R863

100p
C817 220p
D802 C809 0.1 22k
SVC230 0.1
C804 R850 R813 R861 C864

C815
C822
0.1 2.2k 10k 10k 470p
470p
C820 C819
0.001 0.001
R815 Q801

R849
C840

22k
4.7k R817 0.47 2SC3052F
L805 C806 L805 10k REGULATOR Q861
L804 R827

0.047
0.001 2SC3052F

MC2837
FM VT FM RF R806 R816 10k 100

D815
0 R802 DET AMP
R803
VOLTAGE 10
10

C821
C823
18p
C803 R818
47k C838 0.1
C800 0.01
JR801 R801 2.2k
0.1 0
C866
R830 47k
C818 C802 R842 470p
0 0.1 47k
L804 R829 100k
X801 C861 R874
FM TRACKING 75KHz R864 10k 0.1 100k
R843 C867
470k 470p
C824
18p
R870 R869 C865 C863 R875
470k 10k 22 22 IC861 100k
50V 50 PT2579SN

Q802
IC801
2SC3052F
FM/AM TUNER, LV23003VA R844
REGULATOR
10 RDS RECODER
FM/AM PLL

R845 Q862
22 2SC3052F
C839 R841 REGULATOR
0.1 100
1M

R847
RDS-CLK
22
R810

C825 R872
C810 C801 RDS-DO
1 220
0.22 100
16V
R868 10k
JR802

C873

R848
0

2p

1k

C811 0.1 C826 R866 R876 47k

100p R835 10k
4.7k
CF801 C814 R826 (EXCEPT UK,RU)
10k

10k

C813 R820
C828

C827
100p

100p
R822 2.2k

0.1 100 220 R819 10k TU-ANSD

CF802 1000P 47k
JR803 10V
R833

R836

0 R821 TU-DO
220
CF802
TU-CLK
R823
C832 0.47

TU-DI
R824 100
2.2k
(UK,RU) TU-CE
∗ C847,848 0.01 (CND,BR)
0.0047 (EXCEPT CND,BR) VM9V
R825 R834 R846 (Page 3)
Q803 TU-L
470 22k 2.2k
2SC5477 C831 R840 L806 C847 ∗
R831 C833 0.47 22k C829 C830 C848 TU-GND
FM MIX AMP 0.47 FM DET 0.01 0.01 ∗
220 C835 0.22 R837 1k
R859 ∗
C836 0.22 R838 1k JW403 (TUNER OUT L-ch)
R828 C812 L803 CF803 L806
0.1 TU-R
22 (UK,RU) AM IF FM DETECTOR JW402 (TUNER OUT R-ch)
R860 ∗ R859,860 1K (UK,RU)
47 (EXCEPT UK,RU) JW418 (GND) ∗
22K (EXCEPT UK,RU)
EMC-GND

HCD-EH15
2 2
 HCD-EH15

2-2. SCHEMATIC DIAGRAM - MAIN Board (2/2) -

Q194 Q192
KTA1271Y-A VOLTAGE DETECT R197 KTC3203Y-A
(2/2) 100 REGULATOR
FB101

CNP501
R188 Q193 IC101 R185 100 4P
22k ISA1235AC1TP TK70540SCL
R177 -1EF
100k R198 100 Q191
AC DETECT KTC3203Y-A TPR501
Q194,195 R186 100
B+ SWITCH REGULATOR (REC/PB)
R173 R174 R199 100

CONT
VIN VOUT
1k 1k FB102
GND NP R187 100
R-CH
IC301 R179 R189 C543
C189
LA4631-E 10k 22k 0.1 0.001
P0WER AMP Q195
2SC3052F-T R192
100k R196 R195 R505 R507 C507 L-CH
C192 R513 R515
100 100 10k 2.2k 0.01
0.1 100 47

NC

NC
R178 C197 R503

NC
C190 C193 CNP502
10k 0.1 4.7k
10 50V 0.1 C199 220 10V 3P
C198 C503 C505 C509
0.047 SW501
CD_ON C191 0.1 0.1 470p 33
16V (REC/PB)
TAPE
R511 R509 R517 REC

FUSD
2.2M 470k 100k MECHANISM
R406 C403 C515 C407 C408 R519 DECK
0.1 47p 0.0047 0.0047 33k
1k C531 0.001 PB
C532 (MF-EH10)

0.001
0.001
INPUT 0.001 C513 -1
R410
0.001
C307 SELECTOR, 100k

0.22

0.22
1000 C308 C310 R502 C511

C315
C302
ELECTRICAL C501
16V 1000 0.001 C421 100 470p
R412 220 C502 47p
VOLUME 0.1
16V 47p CN106

C404

C406
R302 R308 D193 C512 5P (EXCEPT UK)
R340 R339 MC2838-T11 470p
22k 22k R541
C371 0.1 100 100 7P (UK)
R411 R501 C514 22k (UK)

220
1k 100 0.001

0.1
C301 RDSC

1 50V
0.0022 R520 RDS_SC

R404
33k

C535
RDSC C305 RDSD

2.2k

2.2k
R371 R373 R375 R377 R379 R301 R307 R512 -2
RDS-CLK 1 1 1 1 1 R365 1 22k 22k 2.2M RDS_SD
RDSD 2.2k
R518

C306
RDS-DO 50V TUDI

R303

R304
100k TU_DI
TUAS C504 TUCK
C309
TU-ANSD 470p C510 TU_CK
0.001 33
TUDO C506 R510 TUCE
TU-DO 16V TU_CE
0.047 470k

470p

4.7k

4.7k
TUDI IC401 TUAS
TU-DI TU_ANSD
TUCK BD3881FV R514 R516 TUDO
R372 R374 R376 R378 R380 R403 R504 R506 R508 C508

R305

R306
C311

JW107
TU-CLK C304 100 47 TU_DO
1 1 1 1 1 1k 4.7k 10k 2.2k 0.01
TUCE Refer to page
TU-CE 100 C312 C544 C518
470p 17 on original
16V 0.001 0.1 service manual

C303
4.7 C528 0.001
50V C519
0.1 R532 R534

(Page 2) VM9V
R530
4.7k 10k

2.2k
R531 4.7k R533 10k

AUX-R
AUX-L
TU-L

CD-R
TU-R

CD-L
TU-L
TU-GND

0.1
C401 C527 0.001
TU-R 0.1 R529

470p

470p
4.7k

4.7k
4.7k

4.7k

4.7k
C410 2.2k

C409
50V

22k
0.1 C525 C526

C522

C529
100p

100p
0.01 0.01

TPST
R426
C437

R429
R430

C438
R439

R440
R424 R535 R536 R545

R522
EMC-GND R425 C405 Q507

4.7k
4.7k 220 220 4.7k
4.7k 0.1 2SC3052F-T L501
50V OSC BIAS OSC
R521

R528
22k R561 C561 R560 R542 R544
22k 0.0022 1k 10k 4.7k CN105
R423 R527
R402 17P
4.7k 4.7k
R113 C187 C381 100 C564
JW181 CD_L
4.7k 4.7k 0.001 0.01 CD_L
Q371 C402 C412 C413 R405 C524 R526 R524 R523 R525 C523 CD_R
ISA1235AC1TP C533 CD_R
Q351 100 100 100 0 0.01 10k 4.7k 4.7k 10k 0.01
L 2SJ599 -1EF 16V 0.1 16V 16V R433
C415 AGND
-ZK-E1-AZ 22k
0.1
J101 C183 0.1 R355 R381 C567
R181 10k 10k 0.0047 CD_DVDD 3.3V
D371 C534 R564 C565
SPEAKER 10 R382 R427 R543
C181 0.1 Q352 MC2838-T11 10k 100k 0.1 4.7 1 4.7k MGND
2SC3052F-T
C182 0.1 C184 0.1 R182 S R383 MGND
10 10k C431
R R354 C562 R565 R419

470p
R441 1 9V
R351 10k 47k 0.0022 4.7 33k 50V
10k R434 CD_L
R114 C188 9V
JW182 22k

C433
4.7k 4.7k R442 47k R420 33k C432 1 50V CD_R
D372 C434 CD_AVDD 3.3V
Q372 MC2838-T11 FB103 470p CD_ON
2SC3052F-T CD_ON
FUSD
R356 R352 R353 R384 C382 FUNC_SDA
(CND)
22k 2.2k 10k 1k 0.01
JW137 2.2 AMP_ON
Refer to page
Q351,352 Q371,372 P-MONITER 17 on original
R118 220 TPST
B+ SWITCH AC DETECT service manual
JW137 TP_STATE
R116 220
POWER_ON
R117 220
JW166
R R112 DGND
J102 470k (EXCEPT CND)
R115 220
PHONES VSTBY
L

C142 C141 R120 R119 R111

470k
0.01 0.01 2.2k 2.2k
C194 C196
(UK,RU,KR) 0.1 0.1
D131 R151
10k
C111 L103 C105 MC2836-T11 R175 100k
C101 J105
0.1 3300 0.1 (UK,RU)
35V AUDIO IN
0.47 (KR)
C118
Q101-103 L104
100 10μH
+9V 16V R176 100k
C416 R428
REGULATOR 0.1 100k R152 10k C115
D107 D108 0.1
RL202-B322-1 RL202-B322-1

EXCEPT Q101
D110 2SB1565E R123
E51,BR,SP
RL202-B322-1 470k
R109
100k
470
D109 Q123
JW169

RL202-B322-1 2SC3052F-T R121

(E51,BR,SP)

C156 220k
1N4002-B5
CNA102

R104

0.1 R108 D106 R103 DC DETECT

D112
GND 3P

47k
100 UDZW-TE17-
D111 1N4002-B5 Q102
TO 2SC3052F-T R101
Q122
C155 10k
100k

100k

PT-AC BOARD 2SC3052F-T

CN002 0.1 Q121
JW170

VMAC 2SC3052F-T AC DETECT

Refer to page C109
R105
R110

AC DETECT
1N4002-B5

19 on original VMAC 0.01

Q103
D114

service manual R124

C113 2SC3052F-T C110
D113 100
(EXCEPT E51,SP)

2200 0.22
1N4002-B5 35V
C122
(E51,SP)

R107 220
R102
470 10V
R126 100
47k
R106 C114 R125 C121
R128 220 R129 220 R131 220 18k 0.1 4.7k 0.47
R127
R130
47k 220

HCD-EH15
3 3
HCD-EH15

2-3. PRINTED WIRING BOARD - MAIN Board - • : Uses unleaded solder.

• Semiconductor 1 2 3 4 5 6 7 8 9 10 11 12 13
Location
CF802
Ref. No. Location (UK, RU) (EXCEPT UK, RU)

A BPF801 CF801, 803

D106 L-4
D107 K-3 B. P. F.

D108 K-3
D109 K-4
D110 J-4 (UK)

D111 K-5 R177 R174

D112 L-3 B R173

E

JW207
Q194 E C190
PANEL R189

Q193
B

FB103
BOARD
D113 K-5

R178
CN106
CNP703 JW210 R188

C198
Refer to page E
D114 K-3

C193
Q195

C191
A

D193
16 on original K C199 R199

JW220
JW211
service manual A

JW206
D131 I-4 JW209 C197
JW212 R196

Q191
C189
R179 R198
D193 B-9 MAIN BOARD JW213

JW208
R867

R874

R875
3 1
IC101 4

R857
D371 L-6 (US) FB102 5

E
JW205 JW214 R197
R856 R864
R876

X861
D372 J-6 C

R192
JW204
R866 R187

R195
R868
D802 D-5 R873

L803

Q192
Q862
C867 Q861
C196 JW215 FB101
R186
D803 F-6
E
E

C861

C192
R872
C868
C812
R871

IC861
Refer to page
D812 D-2

E
R869
JW216 R185 16 on original

CF803

BPF801
service manual

C862
R870

C869
C863
D813 D-2
(EXCEPT CND)

C865
K C866

D812
A/K C864 PANEL
CNP802 JR861
C

JW203
A 1 BOARD
D815 F-6

JW836
C818
ANTENNA JR804 R861 CNP706

CNP502
FM/AM

C194

JW137

JW137
D851 E-5 D
JW812
JR802
JW840
3

R831
C804 C432
K

CN105
E

D813
A/K R825 R810 (CND)
R804 JW124
A
Q803 C828

JW809
JW217
IC101 C-11

R854
A JW837

JW811
JW125

D802

JW163

JW164
L804 K C827

JW810
R828 JW218
IC301 L-6
A
C803 R803

R176
CF801 C826

JW825

R406
JW126

R541
J105

R823
C806

JW824
R805 JW833 R152
JW816 JR801

JW165
IC401 H-7
R826 R821 JW219 AUDIO IN

JR803

JW823
R843
JW127

R824

R175
C814 R801 JW815

CF802
IC801 E-4 JR101 (KR, TH) JW832

R851
C853
C851 JW128
C810 R151
JR102 (MX, TW) JW813 L104

JW202
IC861 C-6

JW822

C403
E K JW201

C802
C811

C855

L851
JR103 (AR, AUS) JW814 JW831

L852
D851 R118

C852

JW153
R802 R419

JW138

C115
JW806 JW200

C431
C813 A A

C873
Q101 L-4

JW807

JW808
JR104 (E51, SP) R116

IC801

R809

R120
Q102 L-4 R420

JW152
W802
JW140

C856

C854

R853
JR105 (CND) JW804
JW817

JW129
R848
C831
Q103 L-4

JW132
JW821
JR106 (UK) R117
C833 JW802 C819 R807
JW818

C832

R119
L103
J102
Q121 J-5
JR107 (RU) JW803 A

W801
R115 PHONES

C142
C141
JW805

D803
K

JW139
Q122 J-5 R822
A

L805
R840

R815
F R817

R806
R833

C807
R808

JW409
R850

C815

JW417
Q123 H-4 JW834

R818
C825
R836 R849 C809

R813
A

C829
C830

C820
Q191 C-10

C801

D815
C821 C816 A/K
X801 K R441

C822

C111
C843
C817 R442
Q192 C-10

L806

C824

C823
R819

C834
JW835
(EXCEPT UK, RU) R507 C543
C848 CLP501
Q193 B-10

C434
R834 C507

C841

R812
C847 R816 C505

R811

R505
R835
Q194 B-8

C510
R509

C509
JW829 R814

C836
C835
R517

JW107
C839 R503
R518

C840
R841 R830 R511 TAPE
Q195 B-8 JW830 R440 C503

R515
MECHANISM

R508
R839
R829
G C433 C506
C544 DECK

Q351 M-5 (L-CH)

JW150
E E R504 C508

Q801

R863
R439 R506

R820
CLP103 (R-CH)
Q352 L-5
Q802 R512 1

R837

R838
C838
C533 C504

C535
TPR501

R516
C515 R510

CNP501
R844 R827
Q371 L-6
(REC/PB)
JW416
JW819 C408
R846

C404

R847
SW501
Q372 L-5
C800

R842

CLP401
JW134

R513
4

R514
R845

JW151
JR402 C407 -1
C421
Q507 K-7 PIN102 JW408
JR401

JW403
C406

JW410
JW402
Q801 G-3 R410

JW148
-2

C502
H

C410
R129
Q802 G-2
R128
(REC/PB)
C182

C184

C122 JR403

SW501
JW405 C501

IC401
JW404
REC
Q803 D-3

JW157
E

JW418
Q123
R501

C409

JW142
PB

R402
Q861 C-7 + R502

R130
R182

JW143
C519
JW154
Q862 C-8 L C113 C402

C513
CLP102
R411 JR404

R412
– K

D131
A JW411 R519
J101 R114 K
R131 C412
SPEAKER JW158 JW106 C518
R113 C188 C529 C511

R404
C531

R520

C512
I

R105
JW101 C438

R103
C114
JW104
– JW407

R521

C514
R405
R C522 C532

C401
WH401 R424 R430
JW102 R403
JW103 JW401

R106
C437

R123
C181 R527
+ R534

R522
R528
(UK, RU, KR) JW406 C413 R429
R181 JW159
C528

R434
C105

C187

R433
R426
C183

JW160 R524

C416

R532

R530
JW412
C121

R121
R526 TO

C405
R425
CLP101 PT-AC BOARD

R423
C524 C526
Q122

PIN101 JW161 CN002

C101 E R529
C525 Refer to page
20 on original

R860
J R427 service manual

R859
C527
R126
R127

R428
Q121

C415
E

R533
R531
A A
JW155

JW413

JW414

JW415
R124

C534
D372
R125 R525
K
C156

C523
JW146
JW181

D108
D110

1
D111

R523
D113

C567
CNA102

C312

C310

R302

R308

R301

R307
C155 R545
(E51, SP)

L501 C561
D109

3
R561 R542
K
D107
(EXCEPT E51, SP)

JW171 R304

R544
C309
Q507
JW166 R303

R543
R536
JW144
R306 E

C307
C311
JW170

R305

R560
C564
JW145
K

C562

R564
JW133

R111 D371

R535
E
C110

R565
R101 A A C304
R383

R112
Q372
R384

C305
C306
D114

(EXCEPT E51, BR, SP)

R102
JW156

C109
R107

C565
R354
C303
Q371

R184 Q103 C382

C118

E
E
L E
R339

R353
R382

Q102 C381
C301

D106 R109
Q352
JW169

A K
D112

R381 JW168 C308

R356 R355 E
R108

JW182 C315 C302

R340

B C E G
Q351
R110

R351
R352

R365

HT101 Q101 D
(E51, BR, SP)

R104 IC301
R374 C371
S R373
JW141

JW167 JW149
JW147

R371
R372
R380

R379

R378

R377

R376

R375

M 14, 15
1-876-655- (14, 15)

HCD-EH15
4 4
 HCD-EH15
MAIN
3. ELECTRICAL PARTS LIST
Note:
• Due to standardization, replacements in • RESISTORS MX : Mexican model
the parts list may be different from the All resistors are in ohms. RU : Russian model
parts specified in the diagrams or the com- METAL: Metal-film resistor. SP : Singapore model
ponents used on the set. METAL OXIDE: Metal oxide-film resistor. TH : Thai model
• -XX and -X mean standardized parts, so F: nonflammable TW : Taiwan model
they may have some difference from the • SEMICONDUCTORS
When indicating parts by reference num-
original one. In each case, u: μ, for example:
ber, please include the board name.
• Items marked “*” are not stocked since uA. . : μA. . , uPA. . , μPA. . ,
they are seldom required for routine ser- uPB. . : μPB. . , uPC. . , μPC. . ,
vice. uPD. . : μPD. .
Some delay should be anticipated when • Abbreviation
ordering these items. AR : Argentina model
• CAPACITORS AUS : Australian model
uF: μF BR : Brazilian model
• COILS CND : Canadian model
uH: μH E51 : Chilean and Peruvian model
KR : Korean model

Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark
A-1508-439-A MAIN BOARD, COMPLETE (UK) C194 1-100-566-91 CERAMIC CHIP 0.1uF 10% 25V
A-1508-519-A MAIN BOARD, COMPLETE (CND) C196 1-100-566-91 CERAMIC CHIP 0.1uF 10% 25V
A-1508-544-A MAIN BOARD, COMPLETE (AR, AUS) C197 1-100-566-91 CERAMIC CHIP 0.1uF 10% 25V
A-1508-664-A MAIN BOARD, COMPLETE (E51, SP) C198 1-100-566-91 CERAMIC CHIP 0.1uF 10% 25V
A-1508-703-A MAIN BOARD, COMPLETE (KR, TH) C199 1-126-923-91 ELECT 220uF 20% 10V

A-1508-735-A MAIN BOARD, COMPLETE (MX, TW) C301 1-162-966-11 CERAMIC CHIP 0.0022uF 10% 50V
A-1542-780-A MAIN BOARD, COMPLETE (RU) C302 1-162-964-11 CERAMIC CHIP 0.001uF 10% 50V
A-1547-015-A MAIN BOARD, COMPLETE (BR) C303 1-126-963-11 ELECT 4.7uF 20% 50V
********************* C304 1-126-933-11 ELECT 100uF 20% 16V
C305 1-126-960-11 ELECT 1uF 20% 50V
7-685-646-79 SCREW +BVTP 3X8 TYPE2 N-S
C306 1-126-960-11 ELECT 1uF 20% 50V
< BAND PASS FILTER > C307 1-126-767-11 ELECT 1000uF 20% 16V
C308 1-126-767-11 ELECT 1000uF 20% 16V
BPF801 1-236-711-21 FILTER, BAND PASS C309 1-162-964-11 CERAMIC CHIP 0.001uF 10% 50V
C310 1-162-964-11 CERAMIC CHIP 0.001uF 10% 50V
< CAPACITOR/RESISTOR >
C311 1-162-962-11 CERAMIC CHIP 470PF 10% 50V
C101 1-128-549-11 ELECT 3300uF 20% 35V C312 1-162-962-11 CERAMIC CHIP 470PF 10% 50V
C105 1-100-566-91 CERAMIC CHIP 0.1uF 10% 25V C315 1-162-964-11 CERAMIC CHIP 0.001uF 10% 50V
(UK, RU) C371 1-164-156-11 CERAMIC CHIP 0.1uF 25V
C105 1-117-863-11 CERAMIC CHIP 0.47uF 10% 6.3V C381 1-162-964-11 CERAMIC CHIP 0.001uF 10% 50V
(KR)
C109 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C382 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V
C110 1-115-467-11 CERAMIC CHIP 0.22uF 10% 10V C401 1-126-956-91 ELECT 0.1uF 20% 50V
C402 1-126-933-11 ELECT 100uF 20% 16V
C111 1-164-156-11 CERAMIC CHIP 0.1uF 25V C403 1-100-566-91 CERAMIC CHIP 0.1uF 10% 25V
C113 1-126-953-11 ELECT 2200uF 20% 35V C404 1-115-467-11 CERAMIC CHIP 0.22uF 10% 10V
C114 1-100-566-91 CERAMIC CHIP 0.1uF 10% 25V
C115 1-164-156-11 CERAMIC CHIP 0.1uF 25V C405 1-126-956-91 ELECT 0.1uF 20% 50V
C118 1-126-933-11 ELECT 100uF 20% 16V C406 1-115-467-11 CERAMIC CHIP 0.22uF 10% 10V
C407 1-162-968-11 CERAMIC CHIP 0.0047uF 10% 50V
C121 1-117-863-11 CERAMIC CHIP 0.47uF 10% 6.3V C408 1-162-968-11 CERAMIC CHIP 0.0047uF 10% 50V
C122 1-126-923-91 ELECT 220uF 20% 10V C409 1-100-566-91 CERAMIC CHIP 0.1uF 10% 25V
C141 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V
C142 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C410 1-100-566-91 CERAMIC CHIP 0.1uF 10% 25V
C155 1-165-621-91 CERAMIC CHIP 0.1uF 50V C412 1-126-933-11 ELECT 100uF 20% 16V
C413 1-126-933-11 ELECT 100uF 20% 16V
C156 1-165-621-91 CERAMIC CHIP 0.1uF 50V C415 1-100-566-91 CERAMIC CHIP 0.1uF 10% 25V
C181 1-164-156-11 CERAMIC CHIP 0.1uF 25V C416 1-100-566-91 CERAMIC CHIP 0.1uF 10% 25V
C182 1-164-156-11 CERAMIC CHIP 0.1uF 25V
C183 1-164-156-11 CERAMIC CHIP 0.1uF 25V C421 1-100-566-91 CERAMIC CHIP 0.1uF 10% 25V
C184 1-164-156-11 CERAMIC CHIP 0.1uF 25V C431 1-126-960-11 ELECT 1uF 20% 50V
C187 1-216-829-11 METAL CHIP 4.7K 5% 1/10W C432 1-126-960-11 ELECT 1uF 20% 50V
C433 1-162-962-11 CERAMIC CHIP 470PF 10% 50V
C188 1-216-829-11 METAL CHIP 4.7K 5% 1/10W C434 1-162-962-11 CERAMIC CHIP 470PF 10% 50V
C189 1-100-566-91 CERAMIC CHIP 0.1uF 10% 25V
C190 1-126-964-11 ELECT 10uF 20% 50V C437 1-162-962-11 CERAMIC CHIP 470PF 10% 50V
C191 1-100-566-91 CERAMIC CHIP 0.1uF 10% 25V C438 1-162-962-11 CERAMIC CHIP 470PF 10% 50V
C192 1-100-566-91 CERAMIC CHIP 0.1uF 10% 25V C501 1-162-923-11 CERAMIC CHIP 47PF 5% 50V
C193 1-100-566-91 CERAMIC CHIP 0.1uF 10% 25V C502 1-162-923-11 CERAMIC CHIP 47PF 5% 50V
C503 1-162-962-11 CERAMIC CHIP 470PF 10% 50V

5
HCD-EH15
MAIN

Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark

C504 1-162-962-11 CERAMIC CHIP 470PF 10% 50V C828 1-162-927-11 CERAMIC CHIP 100PF 5% 50V
C505 1-165-176-11 CERAMIC CHIP 0.047uF 10% 16V C829 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V
C506 1-165-176-11 CERAMIC CHIP 0.047uF 10% 16V C830 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V
C507 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C831 1-117-863-11 CERAMIC CHIP 0.47uF 10% 6.3V
C508 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C832 1-117-863-11 CERAMIC CHIP 0.47uF 10% 6.3V

C509 1-126-966-11 ELECT 33uF 20% 50V C833 1-117-863-11 CERAMIC CHIP 0.47uF 10% 6.3V
C510 1-126-966-11 ELECT 33uF 20% 50V C834 1-126-923-91 ELECT 220uF 20% 10V
C511 1-162-962-11 CERAMIC CHIP 470PF 10% 50V C835 1-115-467-11 CERAMIC CHIP 0.22uF 10% 10V
C512 1-162-962-11 CERAMIC CHIP 470PF 10% 50V C836 1-115-467-11 CERAMIC CHIP 0.22uF 10% 10V
C513 1-162-964-11 CERAMIC CHIP 0.001uF 10% 50V C838 1-100-566-91 CERAMIC CHIP 0.1uF 10% 25V

C514 1-162-964-11 CERAMIC CHIP 0.001uF 10% 50V C839 1-100-566-91 CERAMIC CHIP 0.1uF 10% 25V
C515 1-162-923-11 CERAMIC CHIP 47PF 5% 50V C840 1-117-863-11 CERAMIC CHIP 0.47uF 10% 6.3V
C518 1-164-156-11 CERAMIC CHIP 0.1uF 25V C841 1-126-965-91 ELECT 22uF 20% 50V
C519 1-164-156-11 CERAMIC CHIP 0.1uF 25V C843 1-162-960-11 CERAMIC CHIP 220PF 10% 50V
C522 1-162-927-11 CERAMIC CHIP 100PF 5% 50V (EXCEPT UK, RU)
C847 1-162-968-11 CERAMIC CHIP 0.0047uF 10% 50V
C523 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V (EXCEPT CND, BR)
C524 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V
C525 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C847 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V
C526 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V (CND, BR)
C527 1-162-964-11 CERAMIC CHIP 0.001uF 10% 50V C848 1-162-968-11 CERAMIC CHIP 0.0047uF 10% 50V
(EXCEPT CND, BR)
C528 1-162-964-11 CERAMIC CHIP 0.001uF 10% 50V C848 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V
C529 1-162-927-11 CERAMIC CHIP 100PF 5% 50V (CND, BR)
C531 1-162-964-11 CERAMIC CHIP 0.001uF 10% 50V C851 1-165-176-11 CERAMIC CHIP 0.047uF 10% 16V
C532 1-162-964-11 CERAMIC CHIP 0.001uF 10% 50V C852 1-162-915-11 CERAMIC CHIP 10PF 0.5PF 50V
C533 1-100-566-91 CERAMIC CHIP 0.1uF 10% 25V
C853 1-164-227-11 CERAMIC CHIP 0.022uF 10% 25V
C534 1-100-566-91 CERAMIC CHIP 0.1uF 10% 25V C854 1-162-915-11 CERAMIC CHIP 10PF 0.5PF 50V
C535 1-100-566-91 CERAMIC CHIP 0.1uF 10% 25V C855 1-162-962-11 CERAMIC CHIP 470PF 10% 50V
C543 1-162-964-11 CERAMIC CHIP 0.001uF 10% 50V C856 1-162-910-11 CERAMIC CHIP 5PF 0.25PF 50V
C544 1-162-964-11 CERAMIC CHIP 0.001uF 10% 50V C861 1-100-566-91 CERAMIC CHIP 0.1uF 10% 25V (UK)
C561 1-162-966-11 CERAMIC CHIP 0.0022uF 10% 50V
C862 1-100-566-91 CERAMIC CHIP 0.1uF 10% 25V (UK)
C562 1-162-966-11 CERAMIC CHIP 0.0022uF 10% 50V C863 1-126-965-91 ELECT 22uF 20% 50V (UK)
C564 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C864 1-162-962-11 CERAMIC CHIP 470PF 10% 50V (UK)
C565 1-115-156-11 CERAMIC CHIP 1uF 10V C865 1-126-965-91 ELECT 22uF 20% 50V (UK)
C567 1-130-479-00 MYLAR 0.0047uF 5% 50V C866 1-162-962-11 CERAMIC CHIP 470PF 10% 50V (UK)
C800 1-164-156-11 CERAMIC CHIP 0.1uF 25V
C867 1-162-962-11 CERAMIC CHIP 470PF 10% 50V (UK)
C801 1-126-933-11 ELECT 100uF 20% 16V C868 1-162-925-11 CERAMIC CHIP 68PF 5% 50V (UK)
C802 1-100-566-91 CERAMIC CHIP 0.1uF 10% 25V C869 1-162-923-11 CERAMIC CHIP 47PF 5% 50V (UK)
C803 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C873 1-162-907-11 CERAMIC CHIP 2PF 0.25PF 50V
C804 1-100-566-91 CERAMIC CHIP 0.1uF 10% 25V
C806 1-162-964-11 CERAMIC CHIP 0.001uF 10% 50V < FILTER/CAPACITOR >

C807 1-162-966-11 CERAMIC CHIP 0.0022uF 10% 50V CF801 1-795-426-11 FILTER, CERAMIC
C809 1-100-566-91 CERAMIC CHIP 0.1uF 10% 25V CF802 1-128-821-51 CERAMIC 1000PF 5% 50V
C810 1-115-467-11 CERAMIC CHIP 0.22uF 10% 10V (EXCEPT UK, RU)
C811 1-164-156-11 CERAMIC CHIP 0.1uF 25V CF802 1-579-554-21 FILTER, CERAMIC (UK, RU)
C812 1-164-156-11 CERAMIC CHIP 0.1uF 25V CF803 1-781-962-21 FILTER, CERAMIC

C813 1-126-923-91 ELECT 220uF 20% 10V < CONNECTOR >

C814 1-164-156-11 CERAMIC CHIP 0.1uF 25V
C815 1-162-927-11 CERAMIC CHIP 100PF 5% 50V CN105 1-784-778-11 CONNECTOR, FFC 17P
C816 1-115-467-11 CERAMIC CHIP 0.22uF 10% 10V CN106 1-784-766-11 CONNECTOR, FFC 5P (EXCEPT UK)
C817 1-100-566-91 CERAMIC CHIP 0.1uF 10% 25V CN106 1-568-826-11 CONNECTOR, FFC 7P (UK)
CNP501 1-815-445-11 PIN, CONNECTOR (PWB) 4P
C818 1-216-864-11 SHORT CHIP 0 CNP502 1-815-444-11 PIN, CONNECTOR (PWB) 3P
C819 1-162-964-11 CERAMIC CHIP 0.001uF 10% 50V
C820 1-162-964-11 CERAMIC CHIP 0.001uF 10% 50V * CNP802 1-506-680-11 PLUG, CONNECTOR (2.5mm) 3P
C821 1-165-176-11 CERAMIC CHIP 0.047uF 10% 16V (ANTENNA FM/AM)
C822 1-162-962-11 CERAMIC CHIP 470PF 10% 50V
< DIODE >
C823 1-162-918-11 CERAMIC CHIP 18PF 5% 50V
C824 1-162-918-11 CERAMIC CHIP 18PF 5% 50V D106 6-501-172-01 DIODE UDZW-TE17-8.2B
C825 1-125-837-91 CERAMIC CHIP 1uF 10% 6.3V D107 6-502-411-01 DIODE RL202-B322-1
C826 1-162-927-11 CERAMIC CHIP 100PF 5% 50V D108 6-502-411-01 DIODE RL202-B322-1
C827 1-162-927-11 CERAMIC CHIP 100PF 5% 50V D109 6-502-411-01 DIODE RL202-B322-1

6
 HCD-EH15
MAIN

Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark
D110 6-502-411-01 DIODE RL202-B322-1 L804 1-457-163-22 COIL, AIR-CORE

D111 6-501-582-01 DIODE 1N4002-B5 L805 1-457-162-22 COIL, AIR-CORE

D112 6-501-582-01 DIODE 1N4002-B5 (E51, BR, SP) L806 1-457-168-11 COIL, DET
D113 6-501-582-01 DIODE 1N4002-B5 L851 1-457-161-11 COIL, AM ANTENNA
D114 6-501-582-01 DIODE 1N4002-B5 (E51, SP) L852 1-456-596-11 COIL, MW OSC
D131 6-500-334-01 DIODE MC2836-T112-1
< TRANSISTOR >
D193 6-500-335-01 DIODE MC2838-T112-1
D371 6-500-335-01 DIODE MC2838-T112-1 Q101 8-729-024-93 TRANSISTOR 2SB1565E
D372 6-500-335-01 DIODE MC2838-T112-1 Q102 8-729-120-28 TRANSISTOR 2SC1623-L5L6
D802 6-501-369-01 DIODE SVC230-TB-E Q103 8-729-120-28 TRANSISTOR 2SC1623-L5L6
D803 6-501-369-01 DIODE SVC230-TB-E Q121 8-729-120-28 TRANSISTOR 2SC1623-L5L6
Q122 8-729-120-28 TRANSISTOR 2SC1623-L5L6
D812 6-501-579-01 DIODE MC2837
D813 6-501-579-01 DIODE MC2837 Q123 8-729-120-28 TRANSISTOR 2SC1623-L5L6
D815 6-501-579-01 DIODE MC2837 Q191 8-729-036-86 TRANSISTOR KTC3203Y-AT
D851 6-501-142-01 DIODE SVC347A-TL-E Q192 8-729-036-86 TRANSISTOR KTC3203Y-AT
Q193 6-551-696-01 TRANSISTOR ISA1235AC1TP-1EF
< FERRITE BEAD > Q194 8-729-037-13 TRANSISTOR KTA1271Y

FB101 1-469-152-11 FERRITE, EMI (SMD) (2012) Q195 8-729-120-28 TRANSISTOR 2SC1623-L5L6
FB102 1-469-152-11 FERRITE, EMI (SMD) (2012) Q351 6-551-703-01 FET 2SJ599-ZK-E1-AZ
FB103 1-469-152-11 FERRITE, EMI (SMD) (2012) Q352 8-729-120-28 TRANSISTOR 2SC1623-L5L6
Q371 6-551-696-01 TRANSISTOR ISA1235AC1TP-1EF
< IC > Q372 8-729-120-28 TRANSISTOR 2SC1623-L5L6

IC101 6-710-863-01 IC TK70540SCL-G Q507 8-729-120-28 TRANSISTOR 2SC1623-L5L6

IC301 6-706-641-01 IC LA4631-E Q801 8-729-120-28 TRANSISTOR 2SC1623-L5L6
IC401 6-702-895-01 IC BD3881FV Q802 8-729-120-28 TRANSISTOR 2SC1623-L5L6
IC801 6-708-840-01 IC LV23003VA Q803 6-550-304-01 TRANSISTOR 2SC5477-T122-1
IC861 6-708-918-01 IC PT2579SN (UK) Q861 8-729-120-28 TRANSISTOR 2SC1623-L5L6 (UK)

< JACK/TERMINAL BOARD > Q862 8-729-120-28 TRANSISTOR 2SC1623-L5L6 (UK)

J101 1-780-314-11 TERMINAL BOARD (SPEAKER) < RESISTOR >

J102 1-815-629-11 JACK (PHONES)
J105 1-566-822-51 JACK (AUDIO IN) R101 1-216-833-11 METAL CHIP 10K 5% 1/10W
R102 1-216-809-11 METAL CHIP 100 5% 1/10W
< JUMPER RESISTOR > R103 1-216-841-11 METAL CHIP 47K 5% 1/10W
R104 1-216-845-11 METAL CHIP 100K 5% 1/10W
JR101 1-216-864-11 SHORT CHIP 0 (KR, TH) R105 1-216-845-11 METAL CHIP 100K 5% 1/10W
JR102 1-216-864-11 SHORT CHIP 0 (MX, TW)
JR103 1-216-864-11 SHORT CHIP 0 (AR, AUS) R106 1-216-836-11 METAL CHIP 18K 5% 1/10W
JR104 1-216-864-11 SHORT CHIP 0 (E51, SP) R107 1-216-817-11 METAL CHIP 470 5% 1/10W
JR105 1-216-864-11 SHORT CHIP 0 (CND) R108 1-216-809-11 METAL CHIP 100 5% 1/10W
R109 1-216-817-11 METAL CHIP 470 5% 1/10W
JR106 1-216-864-11 SHORT CHIP 0 (UK) R110 1-216-845-11 METAL CHIP 100K 5% 1/10W
JR107 1-216-864-11 SHORT CHIP 0 (RU) R111 1-216-853-11 METAL CHIP 470K 5% 1/10W
JR401 1-216-864-11 SHORT CHIP 0
JR402 1-216-864-11 SHORT CHIP 0 R112 1-216-853-11 METAL CHIP 470K 5% 1/10W
JR403 1-216-864-11 SHORT CHIP 0 R113 1-216-829-11 METAL CHIP 4.7K 5% 1/10W
R114 1-216-829-11 METAL CHIP 4.7K 5% 1/10W
JR404 1-216-864-11 SHORT CHIP 0 R115 1-249-409-11 CARBON 220 5% 1/4W
JR801 1-216-864-11 SHORT CHIP 0 R116 1-249-409-11 CARBON 220 5% 1/4W
JR802 1-216-864-11 SHORT CHIP 0 R117 1-249-409-11 CARBON 220 5% 1/4W
JR803 1-216-864-11 SHORT CHIP 0
JR804 1-216-864-11 SHORT CHIP 0 (UK) R118 1-249-409-11 CARBON 220 5% 1/4W
R119 1-216-825-11 METAL CHIP 2.2K 5% 1/10W
JR861 1-216-864-11 SHORT CHIP 0 (UK) R120 1-216-825-11 METAL CHIP 2.2K 5% 1/10W
R121 1-216-849-11 METAL CHIP 220K 5% 1/10W
< RESISTOR > R123 1-216-853-11 METAL CHIP 470K 5% 1/10W

JW137 1-249-385-11 CARBON 2.2 5% 1/4W R124 1-216-809-11 METAL CHIP 100 5% 1/10W
(CND) R125 1-216-829-11 METAL CHIP 4.7K 5% 1/10W
R126 1-216-841-11 METAL CHIP 47K 5% 1/10W
< COIL/FERRITE BEAD > R127 1-216-841-11 METAL CHIP 47K 5% 1/10W
R128 1-216-813-11 METAL CHIP 220 5% 1/10W
L103 1-469-152-11 FERRITE, EMI (SMD) (2012)
L104 1-410-509-11 INDUCTOR 10uH R129 1-216-813-11 METAL CHIP 220 5% 1/10W
L501 1-456-094-11 TRANSFORMER, BIAS OSCILLATION R130 1-216-813-11 METAL CHIP 220 5% 1/10W
L803 1-433-741-11 TRANSFORMER, IF R131 1-216-813-11 METAL CHIP 220 5% 1/10W

7
HCD-EH15
MAIN

Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark
R151 1-216-833-11 METAL CHIP 10K 5% 1/10W R411 1-216-821-11 METAL CHIP 1K 5% 1/10W
R152 1-216-833-11 METAL CHIP 10K 5% 1/10W R412 1-216-813-11 METAL CHIP 220 5% 1/10W
R419 1-216-839-11 METAL CHIP 33K 5% 1/10W
R173 1-216-821-11 METAL CHIP 1K 5% 1/10W
R174 1-216-821-11 METAL CHIP 1K 5% 1/10W R420 1-216-839-11 METAL CHIP 33K 5% 1/10W
R175 1-216-845-11 METAL CHIP 100K 5% 1/10W R423 1-216-829-11 METAL CHIP 4.7K 5% 1/10W
R176 1-216-845-11 METAL CHIP 100K 5% 1/10W R424 1-216-829-11 METAL CHIP 4.7K 5% 1/10W
R177 1-216-845-11 METAL CHIP 100K 5% 1/10W R425 1-216-829-11 METAL CHIP 4.7K 5% 1/10W
R426 1-216-829-11 METAL CHIP 4.7K 5% 1/10W
R178 1-216-833-11 METAL CHIP 10K 5% 1/10W
R179 1-216-833-11 METAL CHIP 10K 5% 1/10W R427 1-216-845-11 METAL CHIP 100K 5% 1/10W
R181 1-216-797-11 METAL CHIP 10 5% 1/10W R428 1-216-845-11 METAL CHIP 100K 5% 1/10W
R182 1-216-797-11 METAL CHIP 10 5% 1/10W R429 1-216-829-11 METAL CHIP 4.7K 5% 1/10W
R185 1-247-807-31 CARBON 100 5% 1/4W R430 1-216-829-11 METAL CHIP 4.7K 5% 1/10W
R433 1-216-837-11 METAL CHIP 22K 5% 1/10W
R186 1-247-807-31 CARBON 100 5% 1/4W
R187 1-247-807-31 CARBON 100 5% 1/4W R434 1-216-837-11 METAL CHIP 22K 5% 1/10W
R188 1-216-837-11 METAL CHIP 22K 5% 1/10W R439 1-216-829-11 METAL CHIP 4.7K 5% 1/10W
R189 1-216-837-11 METAL CHIP 22K 5% 1/10W R440 1-216-829-11 METAL CHIP 4.7K 5% 1/10W
R192 1-216-845-11 METAL CHIP 100K 5% 1/10W R441 1-216-841-11 METAL CHIP 47K 5% 1/10W
R442 1-216-841-11 METAL CHIP 47K 5% 1/10W
R195 1-216-809-11 METAL CHIP 100 5% 1/10W
R196 1-216-809-11 METAL CHIP 100 5% 1/10W R501 1-216-809-11 METAL CHIP 100 5% 1/10W
R197 1-247-807-31 CARBON 100 5% 1/4W R502 1-216-809-11 METAL CHIP 100 5% 1/10W
R198 1-247-807-31 CARBON 100 5% 1/4W R503 1-216-829-11 METAL CHIP 4.7K 5% 1/10W
R199 1-247-807-31 CARBON 100 5% 1/4W R504 1-216-829-11 METAL CHIP 4.7K 5% 1/10W
R505 1-216-833-11 METAL CHIP 10K 5% 1/10W
R301 1-216-837-11 METAL CHIP 22K 5% 1/10W
R302 1-216-837-11 METAL CHIP 22K 5% 1/10W R506 1-216-833-11 METAL CHIP 10K 5% 1/10W
R303 1-216-825-11 METAL CHIP 2.2K 5% 1/10W R507 1-216-825-11 METAL CHIP 2.2K 5% 1/10W
R304 1-216-825-11 METAL CHIP 2.2K 5% 1/10W R508 1-216-825-11 METAL CHIP 2.2K 5% 1/10W
R305 1-216-829-11 METAL CHIP 4.7K 5% 1/10W R509 1-216-853-11 METAL CHIP 470K 5% 1/10W
R510 1-216-853-11 METAL CHIP 470K 5% 1/10W
R306 1-216-829-11 METAL CHIP 4.7K 5% 1/10W
R307 1-216-837-11 METAL CHIP 22K 5% 1/10W R511 1-216-861-11 METAL CHIP 2.2M 5% 1/10W
R308 1-216-837-11 METAL CHIP 22K 5% 1/10W R512 1-216-861-11 METAL CHIP 2.2M 5% 1/10W
R339 1-216-809-11 METAL CHIP 100 5% 1/10W R513 1-216-809-11 METAL CHIP 100 5% 1/10W
R340 1-216-809-11 METAL CHIP 100 5% 1/10W R514 1-216-809-11 METAL CHIP 100 5% 1/10W
R515 1-216-805-11 METAL CHIP 47 5% 1/10W
R351 1-216-833-11 METAL CHIP 10K 5% 1/10W
R352 1-216-825-11 METAL CHIP 2.2K 5% 1/10W R516 1-216-805-11 METAL CHIP 47 5% 1/10W
R353 1-216-833-11 METAL CHIP 10K 5% 1/10W R517 1-216-845-11 METAL CHIP 100K 5% 1/10W
R354 1-216-833-11 METAL CHIP 10K 5% 1/10W R518 1-216-845-11 METAL CHIP 100K 5% 1/10W
R355 1-216-833-11 METAL CHIP 10K 5% 1/10W R519 1-216-839-11 METAL CHIP 33K 5% 1/10W
R520 1-216-839-11 METAL CHIP 33K 5% 1/10W
R356 1-216-837-11 METAL CHIP 22K 5% 1/10W
R365 1-216-825-11 METAL CHIP 2.2K 5% 1/10W R521 1-216-837-11 METAL CHIP 22K 5% 1/10W
R371 1-218-446-11 METAL CHIP 1 5% 1/10W R522 1-216-837-11 METAL CHIP 22K 5% 1/10W
R372 1-218-446-11 METAL CHIP 1 5% 1/10W R523 1-216-829-11 METAL CHIP 4.7K 5% 1/10W
R373 1-218-446-11 METAL CHIP 1 5% 1/10W R524 1-216-829-11 METAL CHIP 4.7K 5% 1/10W
R525 1-216-833-11 METAL CHIP 10K 5% 1/10W
R374 1-218-446-11 METAL CHIP 1 5% 1/10W
R375 1-218-446-11 METAL CHIP 1 5% 1/10W R526 1-216-833-11 METAL CHIP 10K 5% 1/10W
R376 1-218-446-11 METAL CHIP 1 5% 1/10W R527 1-216-829-11 METAL CHIP 4.7K 5% 1/10W
R377 1-218-446-11 METAL CHIP 1 5% 1/10W R528 1-216-829-11 METAL CHIP 4.7K 5% 1/10W
R378 1-218-446-11 METAL CHIP 1 5% 1/10W R529 1-216-825-11 METAL CHIP 2.2K 5% 1/10W
R530 1-216-825-11 METAL CHIP 2.2K 5% 1/10W
R379 1-218-446-11 METAL CHIP 1 5% 1/10W
R380 1-218-446-11 METAL CHIP 1 5% 1/10W R531 1-216-829-11 METAL CHIP 4.7K 5% 1/10W
R381 1-216-833-11 METAL CHIP 10K 5% 1/10W R532 1-216-829-11 METAL CHIP 4.7K 5% 1/10W
R382 1-216-833-11 METAL CHIP 10K 5% 1/10W R533 1-216-833-11 METAL CHIP 10K 5% 1/10W
R383 1-216-833-11 METAL CHIP 10K 5% 1/10W R534 1-216-833-11 METAL CHIP 10K 5% 1/10W
R535 1-216-813-11 METAL CHIP 220 5% 1/10W
R384 1-216-821-11 METAL CHIP 1K 5% 1/10W
R402 1-216-809-11 METAL CHIP 100 5% 1/10W R536 1-216-813-11 METAL CHIP 220 5% 1/10W
R403 1-216-821-11 METAL CHIP 1K 5% 1/10W R541 1-216-837-11 METAL CHIP 22K 5% 1/10W
R404 1-216-813-11 METAL CHIP 220 5% 1/10W R542 1-216-833-11 METAL CHIP 10K 5% 1/10W
R405 1-216-864-11 SHORT CHIP 0 R543 1-216-829-11 METAL CHIP 4.7K 5% 1/10W
R544 1-216-829-11 METAL CHIP 4.7K 5% 1/10W
R406 1-216-821-11 METAL CHIP 1K 5% 1/10W
R410 1-216-845-11 METAL CHIP 100K 5% 1/10W R545 1-216-829-11 METAL CHIP 4.7K 5% 1/10W
R560 1-216-821-11 METAL CHIP 1K 5% 1/10W

8
 HCD-EH15
MAIN

Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark
R561 1-216-837-11 METAL CHIP 22K 5% 1/10W R859 1-216-821-11 METAL CHIP 1K 5% 1/10W
R564 1-216-793-11 METAL CHIP 4.7 5% 1/10W (UK, RU)
R565 1-216-793-11 METAL CHIP 4.7 5% 1/10W
R859 1-216-837-11 METAL CHIP 22K 5% 1/10W
R801 1-216-825-11 METAL CHIP 2.2K 5% 1/10W (EXCEPT UK, RU)
R802 1-216-797-11 METAL CHIP 10 5% 1/10W R860 1-216-821-11 METAL CHIP 1K 5% 1/10W
R803 1-216-797-11 METAL CHIP 10 5% 1/10W (UK, RU)
R804 1-216-864-11 SHORT CHIP 0 R860 1-216-837-11 METAL CHIP 22K 5% 1/10W
R805 1-216-845-11 METAL CHIP 100K 5% 1/10W (EXCEPT UK, RU)
R861 1-216-833-11 METAL CHIP 10K 5% 1/10W
R806 1-216-864-11 SHORT CHIP 0 (UK)
R807 1-216-845-11 METAL CHIP 100K 5% 1/10W R863 1-216-837-11 METAL CHIP 22K 5% 1/10W
R808 1-216-833-11 METAL CHIP 10K 5% 1/10W
R809 1-216-821-11 METAL CHIP 1K 5% 1/10W R864 1-216-833-11 METAL CHIP 10K 5% 1/10W
R810 1-216-857-11 METAL CHIP 1M 5% 1/10W (UK)
R866 1-216-833-11 METAL CHIP 10K 5% 1/10W
R811 1-216-829-11 METAL CHIP 4.7K 5% 1/10W (UK)
R812 1-216-817-11 METAL CHIP 470 5% 1/10W R867 1-216-833-11 METAL CHIP 10K 5% 1/10W
R813 1-216-833-11 METAL CHIP 10K 5% 1/10W (UK)
R814 1-216-809-11 METAL CHIP 100 5% 1/10W R868 1-216-833-11 METAL CHIP 10K 5% 1/10W
R815 1-216-829-11 METAL CHIP 4.7K 5% 1/10W (UK)
R869 1-216-833-11 METAL CHIP 10K 5% 1/10W
R816 1-216-833-11 METAL CHIP 10K 5% 1/10W (UK)
R817 1-216-833-11 METAL CHIP 10K 5% 1/10W
R818 1-216-841-11 METAL CHIP 47K 5% 1/10W R870 1-216-853-11 METAL CHIP 470K 5% 1/10W
R819 1-216-841-11 METAL CHIP 47K 5% 1/10W (UK)
R820 1-216-833-11 METAL CHIP 10K 5% 1/10W R871 1-216-849-11 METAL CHIP 220K 5% 1/10W
(UK)
R821 1-216-813-11 METAL CHIP 220 5% 1/10W R872 1-216-813-11 METAL CHIP 220 5% 1/10W
R822 1-216-825-11 METAL CHIP 2.2K 5% 1/10W (UK)
R823 1-216-809-11 METAL CHIP 100 5% 1/10W R873 1-216-825-11 METAL CHIP 2.2K 5% 1/10W
R824 1-216-825-11 METAL CHIP 2.2K 5% 1/10W (UK)
R825 1-216-817-11 METAL CHIP 470 5% 1/10W R874 1-216-845-11 METAL CHIP 100K 5% 1/10W
(UK)
R826 1-216-809-11 METAL CHIP 100 5% 1/10W
R827 1-216-809-11 METAL CHIP 100 5% 1/10W R875 1-216-845-11 METAL CHIP 100K 5% 1/10W
R828 1-216-801-11 METAL CHIP 22 5% 1/10W (UK)
(UK, RU) R876 1-216-841-11 METAL CHIP 47K 5% 1/10W
R828 1-216-805-11 METAL CHIP 47 5% 1/10W (UK)
(EXCEPT UK, RU)
R829 1-216-845-11 METAL CHIP 100K 5% 1/10W < SWITCH >

R830 1-216-841-11 METAL CHIP 47K 5% 1/10W SW501 1-762-369-11 SWITCH, SLIDE (REC/PB)
R831 1-216-813-11 METAL CHIP 220 5% 1/10W
R833 1-216-833-11 METAL CHIP 10K 5% 1/10W < VIBRATOR >
R834 1-216-837-11 METAL CHIP 22K 5% 1/10W
R835 1-216-829-11 METAL CHIP 4.7K 5% 1/10W X801 1-767-388-21 VIBRATOR, CRYSTAL (75kHz) (EXCEPT UK, RU)
X801 1-795-926-11 VIBRATOR, CRYSTAL (75kHz) (UK, RU)
R836 1-216-833-11 METAL CHIP 10K 5% 1/10W X861 1-579-900-21 VIBRATOR, CRYSTAL (4.332MHz) (UK)
R837 1-216-821-11 METAL CHIP 1K 5% 1/10W
R838 1-216-821-11 METAL CHIP 1K 5% 1/10W
R839 1-216-809-11 METAL CHIP 100 5% 1/10W
R840 1-216-837-11 METAL CHIP 22K 5% 1/10W

R841 1-216-809-11 METAL CHIP 100 5% 1/10W

R842 1-216-841-11 METAL CHIP 47K 5% 1/10W
R843 1-216-853-11 METAL CHIP 470K 5% 1/10W
R844 1-216-797-11 METAL CHIP 10 5% 1/10W
R845 1-216-801-11 METAL CHIP 22 5% 1/10W

R846 1-216-825-11 METAL CHIP 2.2K 5% 1/10W

R847 1-216-801-11 METAL CHIP 22 5% 1/10W
R848 1-216-821-11 METAL CHIP 1K 5% 1/10W
R849 1-216-837-11 METAL CHIP 22K 5% 1/10W
R850 1-216-825-11 METAL CHIP 2.2K 5% 1/10W

R851 1-216-837-11 METAL CHIP 22K 5% 1/10W

R853 1-216-845-11 METAL CHIP 100K 5% 1/10W
R856 1-216-841-11 METAL CHIP 47K 5% 1/10W
(UK)
R857 1-216-841-11 METAL CHIP 47K 5% 1/10W
(UK)

9
HCD-EH15

REVISION HISTORY

Checking the version allows you to jump to the revised page.

Also, clicking the version at the top of the revised page allows you to jump to the next revised page.
Ver. Date Description of Revision
1.0 2008.04 New
1.1 2008.07 Addition of Brazilian and Thai models
Change of PANEL, PT-AC and VOLTAGE-SEL boards (Suffix-14/15)
Change of MAIN board (Suffix-14/15) (SUPPLEMENT-1) (SMR-08082)