Model: XX-B50

Generic IB (English and French)

Color: Black text on white paper (1C + 1C) (Front)
Size: 270 x 270 mm
Date: Mar. 15, 2017

Introduction PREPARATION FOR USE

Model: B50 Your new Bluetooth stereo headphones are designed to link with your Bluetooth enabled 1. Controls and Indicators
smartphone or music player to allow you to wirelessly listen to music and answer phone Button (Volume Up / Skip Forward)
1
calls within the normal 10 meter (33 feet) Bluetooth operating range.
2 Play/Pause
1
Please review this manual carefully to make sure you are getting the maximum benefit 3 Button (Volume Down / Skip Back)
2
from all of the features of your new headphones, and keep this manual for future 4 Power/Pairing/Charging LED Indicators
reference. 3
5 USB Charging Port
4
6 AUX Jack 5

Headphones What’s Included

7 Microphone
6
7

2. Charging Your Headphones

Your Bluetooth headphones operate on a built-in rechargeable battery. Although the
battery was fully charged when it left our factory, the battery can lose power even
during periods of non-use. Make sure to charge the battery before using the
headphones for the first time.
To charge the battery connect the larger plug of the included USB charging cable to
the powered USB port of a computer or a USB/AC adapter, and then connect the
smaller plug to the USB charging port on the side of the right ear cup.
USB Charging Cable
The Charging Indicator will glow red while the ear buds are charging. The indicator will
turn off when the headphones are fully charged and ready to use.
When fully charged the battery should provide up to 7 hours of talk time or music
playing time at a normal listening level. If operated at maximum volume the music
playing time will be reduced.
NOTE: While charging, the headphone power will turn off to conserve battery power
and minimize charging time.

B50 Headphones Detachable Audio Cable

The AUX jack allows you to use your Bluetooth headphones as normal headphones Computer
so that you can listen to music on any non-Bluetooth device that is equipped with USB port
a 3.5mm headphone jack. Connect the included audio cable to the AUX jack on the
right earcup of your headphones, and to the headphone jack of your auxiliary music
source.Your headphones should be in the Power “Off” mode. Use the volume and Computer connected
track navigation controls on your music player as your would with any normal to working outlet USB Adaptor OR
CHARGE headphones. (not included)

BEFORE
BC USE
1

FuncƟon AcƟon Required

Turn headphones On When headphones are 'Off’, press and hold the Play/Pause Button for 3 seconds
OPERATING INSTRUCTIONS until the LED indicator flashes blue. Limited One-Year Warranty Information
Enter Pairing Mode When headphones are 'Off', press and hold the Play/Pause Button for 8 seconds
1. First Time Power On: Auto Pairing until the LED indicator alternately flashing red and blue. eKids warrants this product to be free from defects in workmanship and materials, under
Make sure your Bluetooth device is 'On' and discoverable. When “eKids B50”
The first time you power on the headphones, PRESS and HOLD the Play/Pause Pairing appears on your device’s menu, select it to complete pairing. normal use and conditions, for a period of one (1) year from the date of original purchase.
Button on the right earcup for about 3 seconds until the LED flashes. The first time Short press the Play/Pause Button to start playback. Short press to pause Should this product fail to function in a satisfactory manner, it is best to first return it to the
the headphones are powered on they will enter auto-pairing mode, indicated by Play / Pause playback. Short press to resume playback.
flashing red and blue LEDs . Short press the button during playback
store where it was originally purchased. Should this fail to resolve the matter and service
Skip to next track still be required by reason of any defect or malfunction during the warranty period, eKids
a) Make sure Bluetooth is enabled on your device (check in Settings or Options).
Skip to beginning of current track Short press the button during playback
b) “ekids B50” will apear on your device’s Bluetooth menu. Skip to beginning of previous track Short press the
will repair or, at its discretion, replace this product without charge. This decision is subject
button twice during playback
c) Select “ekids B50” to complete pairing. NOTE: If your Bluetooth device asks for a Increase volume Press and hold the button during playback to verification of the defect or malfunction upon delivery of this product to the Factory
Password or a PIN to complete the pairing process, enter “0000” on the keypad of Decrease volume Press and hold the button during playback Service Center authorized by Customer Service. If service is required, please call Customer
your device. You are now ready to begin streaming music wirelessly from your Answer an incoming phone call Short press the Play/Pause Button when you hear the incoming ring sound. NOTE:
Service at 1-888-TOP-TOYS to obtain a Return Authorization Number and shipping
Bluetooth device to your Bluetooth headphones. Music will automatically pause when you are answering a call and resume when you
end the call. instructions. A copy of the sales receipt is required to validate in-warranty coverage.
Siri/Google Voice
2. Standard Power On: Auto-Linking Mode Press and hold the button for 2-3 seconds. Disclaimer of Warranty
After the first time, whenever you power on the headphones, the blue LED will Decline an incoming phone call Press and hold the Play/Pause Button for 3 seconds to decline the incoming call.
flash slowly indicating that your headphones are in Auto-Linking Mode (trying to re-link End a call
NOTE: This warranty is valid only if the product is used for the purpose for which it was
Short press the Play/Pause Button to end the call and 'hang up'.
to a previously paired device) that is within the normal pairing range of about 33-feet. Transfer a call between the While the call is in progress, press and hold the Play/Pause Button for 2 seconds. designed. It does not cover (i) products which have been damaged by negligence or willful
If your headphones do not find a previously paired device that is in range and turned phone and the headphones You will hear a beep indicating to transfer the call.
actions, misuse or accident, or which have been modified or repaired by unauthorized
‘on’ within 3 minutes, they will power OFF to extend the battery life. Last number redial When no call is in progress, double press Play/Pause to redial the last number.
persons; (ii) cracked or broken cabinets, or units damaged by excessive heat; (iii) damage
Reset Bluetooth/Clear all paired devices Press and hold both the and the buttons for 7 seconds.
to digital media players, CD’s or tape cassettes (if applicable); (iv) the cost of shipping this
3. Manually Pairing Your Headphones With Your Bluetooth Device Turn headphones Off Press and hold Play/Pause for 3 seconds until the LED indicator flashes red
product to the Factory Service Center and its return to the owner. This warranty is valid
and then shuts off.
NOTE: Your headphones must be ‘Off’’ to begin the manual pairing process.
only in the United States of America and does not extend to owners of the product other
With the headphones in ‘Off’ mode, PRESS and HOLD the Play/Pause Button on FCC/IC Information
than to the original purchaser. In no event will eKids or any of its affiliates, contractors,
the right earcup for about 8 seconds. After 3 seconds the LEDs will flash red and This device complies with Industry Canada’s licence-exempt RSSs. IC: 986B-IB50
blue. Release the Play/Pause Button. Follow the a-c pairing instructions in Step 1 Operation is subject to the following two conditions: resellers, their officers, directors, shareholders, members or agents be liable to you or any
above to complete pairing. (1) This device may not cause interference; and third party for any consequential or incidental damages, any lost profits, actual, exemplary
(2) This device must accept any interference, including interference that may cause undesired
operation of the device. or punitive damages. (Some states do not allow limitations on implied warranties or exclusion
4. Power Off This device complies with Part 15 of the FCC Rules, operation is subject to the following two conditions: of consequential damages, so these restrictions may not apply to you.) This warranty gives
(1) This device may not cause harmful interference, and (2) this device must accept any interference
To turn the headphones ‘Off’ at any time, PRESS and HOLD the Play/Pause Button received, including interference that may cause undesired operation. you specific legal rights, and you may also have other rights which vary from state to state.
on the right earcup for about 3 seconds.The red LED flashes three times and then the Your acknowledgement and agreement to fully and completely abide by the above mentioned
• Warning: Changes or modifications to this unit not expressly approved by the party responsible
power shuts off. for compliance could void the user’s authority to operate the equipment. disclaimer of warranty is contractually binding to you upon your transfer of currency (money
• NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. order, cashier's check, or credit card) for purchase of your eKids product.
5. Using Your Bluetooth Headphones These limits are designed to provide reasonable protection against harmful interference in a
The following chart explains the basic functions and operations of your Bluetooth residential installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful interference Distributed by eKids, LLC
headphones.
to radio communications. For questions or comments please call our toll-free number:
However, there is no guarantee that interference will not occur in a particular installation. If this 1-888-TOP-TOYS
equipment does cause harmful interference to radio or television reception, which can be Also visit our website: www.ekids.com
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures: 1299 Main Street Rahway, NJ 07065
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
CAN ICES-3 (B)/NMB-3(B)
The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and
compliance with RSS-102 RF exposure, users can obtain Canadian information on RF exposure
2 and compliance. 3 XX-B50_IB_031517-A Printed in China