Scribd
Upload
249 views

Configure IP Addresses

The lab report summarizes configuring network adapter settings on a computer. It describes configuring the IP settings for the Local Area Connection and Local Area Connection 2 network adapters, and then successfully pinging the preferred DNS server assigned to Local Area Connection.

Uploaded by

michael
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
249 views

Configure IP Addresses

The lab report summarizes configuring network adapter settings on a computer. It describes configuring the IP settings for the Local Area Connection and Local Area Connection 2 network adapters, and then successfully pinging the preferred DNS server assigned to Local Area Connection.

Uploaded by

michael
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

18/01/2024, 18:59 Learning Platform | CompTIA

Lab Report

Lab Report
Time Spent: 12:38
Score: 3/3 (100%)
TASK SUMMARY
Required Actions
Configure settings for Local Area Connection Show Details
Configure settings for Local Area Connection 2 Show Details
Successfully ping the preferred DNS server

EXPLANATION
Complete this lab as follows:

1. Access the properties for the NIC named Ethernet.


a. Right-click Start and then select Settings.
b. Select Network & internet.
c. From the right pane, select Ethernet.
2. Configure the IP version 4 TCP/IP settings for the Ethernet NIC.
a. For IP assignment, select Edit.
b. Configure the IPv4 settings as follows:
IP address: 192.168.0.254
Subnet mask: 255.255.255.0
Default gateway: 192.168.0.5
Preferred DNS: 163.128.78.93
Alternate DNS: 163.128.80.93
c. Select Save.
3. Configure the IP version 4 TCP/IP settings for the Ethernet 2 NIC.
a. From the left pane of the Settings app, select Network & internet.
b. From the right pane, select Advanced network settings.
c. Select More network adapter options.
d. From the Network Connections window, right-click Ethernet 2 and then select Properties.
e. Select Internet Protocol Version 4 (TCP/IPv4).
f. Select Properties.
g. Select Use the following IP address.
h. Configure the Internet Protocol information as follows:
IP address: 10.0.255.254
Subnet mask: 255.255.0.0
Default gateway: None
Preferred DNS server: None
i. Select OK.
j. Select Close.
4. Ping the preferred DNS server assigned to the Ethernet NIC.
a. Right-click Start and select Terminal (Admin).
b. From the PowerShell prompt, type one of the following:
ping 163.128.78.93
ping 163.128.80.93
c. Press Enter.

https://labsimapp.testout.com/v6_0_581/simwindow.html?c2ltRGVmVXJsPWh0dHBzJTNBJTJGJTJGY2RuLnRlc3RvdXQuY29tJTJGX3ZlcnNpb25fODAxN… 1/1

You might also like