2.
10: Naming Binary, Nonmetal Compounds
Generally, there are two types of inorganic compounds that can be formed: ionic compounds and molecular compounds.
Nomenclature is the process of naming chemical compounds with different names so that they can be easily identified as separate
chemicals. Inorganic compounds are compounds that do not deal with the formation of carbohydrates, or simply all other
compounds that do not fit into the description of an organic compound. For example, organic compounds include molecules with
carbon rings and/or chains with hydrogen atoms (see picture below). Inorganic compounds, the topic of this section, are every other
molecule that does not include these distinctive carbon and hydrogen structures.
Compounds between Metals and Nonmetals (Cation and Anion)
Compounds made of a metal and nonmetal are commonly known as Ionic Compounds, where the compound name has an ending of
–ide. Cations have positive charges while anions have negative charges. The net charge of any ionic compound must be zero which
also means it must be electrically neutral. For example, one Na+ is paired with one Cl-; one Ca2+ is paired with two Br-. There are
two rules that must be followed through:
The cation (metal) is always named first with its name unchanged
The anion (nonmetal) is written after the cation, modified to end in –ide
Table 1: Cations and Anions:
+1 Charge +2 Charge -1 Charge -2 Charge -3 Charge -4 Charge
Group 1A elements Group 2A elements Group 7A elements Group 6A elements Group 5A elements Group 4A elements
Hydrogen: H+ Beryllium: Be2+ Hydride: H- Oxide: O2- Nitride: N3- Carbide: C4-
Lithium: Li+ Magnesium: Mg2+ Fluoride: F- Sulfide: S2- Phosphide: P3-
Soduim: Na+ Calcium: Ca2+ Chloride: Cl-
Potassium: K+ Strontium: Sr2+ Bromide: Br-
Rubidium: Rb+ Barium: Ba2+ Iodide: I-
Cesium: Cs+
Example 1
Na+ + Cl- = NaCl; Ca2+ + 2Br- = CaBr2
Sodium + Chlorine = Sodium Chloride; Calcium + Bromine = Calcium Bromide
The transition metals may form more than one ion, thus it is needed to be specified which particular ion we are talking about. This
is indicated by assigning a Roman numeral after the metal. The Roman numeral denotes the charge and the oxidation state of the
transition metal ion. For example, iron can form two common ions, Fe2+ and Fe3+. To distinguish the difference, Fe2+ would be
named iron (II) and Fe3+ would be named iron (III).
Table of Transition Metal and Metal Cations:
+1 Charge +2 Charge +3 Charge +4 Charge
Copper(I): Cu+ Copper(II): Cu2+ Aluminum: Al3+ Lead(IV): Pb4+
Silver: Ag+ Iron(II): Fe2+ Iron(III): Fe3+ Tin(IV): Sn4+
Cobalt(II): Co2+ Cobalt(III): Co3+
Tin(II): Sn2+
Lead(II): Pb2+
Nickel: Ni2+
Zinc: Zn2+
2.10.1 https://chem.libretexts.org/@go/page/13553
Example 2
Ions: Fe2++ 2Cl- Fe3++ 3Cl-
Compound: FeCl2 FeCl3
Nomenclature Iron (II) Chloride Iron (III) Chloride
However, some of the transition metals' charges have specific Latin names. Just like the other nomenclature rules, the ion of the
transition metal that has the lower charge has the Latin name ending with -ous and the one with the the higher charge has a Latin
name ending with -ic. The most common ones are shown in the table below:
Transition Metal Ion with Roman Numeral Latin name
Copper (I): Cu+ Cuprous
Copper (II): Cu2+ Cupric
Iron (II): Fe2+ Ferrous
Iron (III): Fe3+ Ferric
Lead (II): Pb2+ Plumbous
Lead (IV): Pb4+ Plumbic
Mercury (I): Hg22+ Mercurous
Mercury (II): Hg2+ Mercuric
Tin (II): Sn2+ Stannous
Tin (IV): Sn4+ Stannic
Several exceptions apply to the Roman numeral assignment: Aluminum, Zinc, and Silver. Although they belong to the transition
metal category, these metals do not have Roman numerals written after their names because these metals only exist in one ion.
Instead of using Roman numerals, the different ions can also be presented in plain words. The metal is changed to end in –ous or –
ic.
-ous ending is used for the lower oxidation state
-ic ending is used for the higher oxidation state
Example 3
Compound Cu2O CuO FeCl2 FeCl3
Charge Charge of copper is +1 Charge of copper is +2 Charge of iron is +2 Charge of iron is +3
Nomenclature Cuprous Oxide Cupric Oxide Ferrous Chloride Ferric Chloride
However, this -ous/-ic system is inadequate in some cases, so the Roman numeral system is preferred. This system is used
commonly in naming acids, where H2SO4 is commonly known as Sulfuric Acid, and H2SO3 is known as Sulfurous Acid.
Compounds between Nonmetals and Nonmetals
Compounds that consist of a nonmetal bonded to a nonmetal are commonly known as Molecular Compounds, where the element
with the positive oxidation state is written first. In many cases, nonmetals form more than one binary compound, so prefixes are
used to distinguish them.
# of
1 2 3 4 5 6 7 8 9 10
Atoms
Prefixes Mono- Di- Tri- Tetra- Penta- Hexa- Hepta- Octa- Nona- Deca-
2.10.2 https://chem.libretexts.org/@go/page/13553
Example 4
CO = carbon monoxide BCl3 = borontrichloride
CO2 = carbon dioxide N2O5 =dinitrogen pentoxide
The prefix mono- is not used for the first element. If there is not a prefix before the first element, it is assumed that there is only
one atom of that element.
Binary Acids
Although HF can be named hydrogen fluoride, it is given a different name for emphasis that it is an acid. An acid is a substance
that dissociates into hydrogen ions (H+) and anions in water. A quick way to identify acids is to see if there is an H (denoting
hydrogen) in front of the molecular formula of the compound. To name acids, the prefix hydro- is placed in front of the nonmetal
modified to end with –ic. The state of acids is aqueous (aq) because acids are found in water.
Some common binary acids include:
HF (g) = hydrogen fluoride -> HF (aq) = hydrofluoric acid
HBr (g) = hydrogen bromide -> HBr (aq) = hydrobromic acid
HCl (g) = hydrogen chloride -> HCl (aq) = hydrochloric acid
H2S (g) = hydrogen sulfide -> H2S (aq) = hydrosulfuricacid
It is important to include (aq) after the acids because the same compounds can be written in gas phase with hydrogen named first
followed by the anion ending with –ide.
Example 5
hypo____ite ____ite ____ate per____ate
ClO- ClO2- ClO3- ClO4-
hypochlorite chlorite chlorate perchlorate
---------------->
As indicated by the arrow, moving to the right, the following trends occur:
Increasing number of oxygen atoms
Increasing oxidation state of the nonmetal
(Usage of this example can be seen from the set of compounds containing Cl and O)
This occurs because the number of oxygen atoms are increasing from hypochlorite to perchlorate, yet the overall charge of the
polyatomic ion is still -1. To correctly specify how many oxygen atoms are in the ion, prefixes and suffixes are again used.
Polyatomic Ions
In polyatomic ions, polyatomic (meaning two or more atoms) are joined together by covalent bonds. Although there may be a
element with positive charge like H+, it is not joined with another element with an ionic bond. This occurs because if the atoms
formed an ionic bond, then it would have already become a compound, thus not needing to gain or loose any electrons. Polyatomic
anions are more common than polyatomic cations as shown in the chart below. Polyatomic anions have negative charges while
polyatomic cations have positive charges. To indicate different polyatomic ions made up of the same elements, the name of the ion
is modified according to the example below:
Table: Common Polyatomic ions
Name: Cation/Anion Formula
Ammonium ion NH4+
Hydronium ion H3O+
2.10.3 https://chem.libretexts.org/@go/page/13553
Name: Cation/Anion Formula
Acetate ion C2H3O2-
Arsenate ion AsO43-
Carbonate ion CO32-
Hypochlorite ion ClO-
Chlorite ion ClO2-
Chlorate ion ClO3-
Perchlorate ion ClO4-
Chromate ion CrO42-
Dichromate ion Cr2O72-
Cyanide ion CN-
Hydroxide ion OH-
Nitrite ion NO2-
Nitrate ion NO3-
Oxalate ion C2O42-
Permanganate ion MnO4-
Phosphate ion PO43-
Sulfite ion SO32-
Sulfate ion SO42-
Thiocyanate ion SCN-
Thiosulfate ion S2O32-
To combine the topic of acids and polyatomic ions, there is nomenclature of aqueous acids. Such acids include sulfuric acid
(H2SO4) or carbonic acid (H2CO3). To name them, follow these quick, simple rules:
1. If the ion ends in -ate and is added with an acid, the acid name will have an -ic ending. Examples: nitrate ion (NO3-) + H+
(denoting formation of acid) = nitric acid (HNO3)
2. If the ion ends in -ite and is added with an acid, then the acid name will have an -ous ending. Example: nitite ion (NO2-) + H+
(denoting formation of acid) = nitrous acid (HNO2)
References
1. Pettrucci, Ralph H. General Chemistry: Principles and Modern Applications. 9th. Upper Saddle River: Pearson Prentice Hall,
2007
2. Nomenclature of Inorganic Chemistry, Recommendations 1990, Oxford:Blackwell Scientific Publications. (1990)
3. International Union of Pure and Applied Chemistry (2005). Nomenclature of Inorganic Chemistry (IUPAC Recommendations
2005). Cambridge (UK): RSC–IUPAC. ISBN 0-85404-438-8. Electronic version..
4. Biochemical Nomenclature and Related Documents, London:Portland Press, 1992.
Problems
1. What is the correct formula for Calcium Carbonate?
a. Ca+ + CO2-
b. CaCO2-
c. CaCO3
d. 2CaCO3
2.10.4 https://chem.libretexts.org/@go/page/13553
2. What is the correct name for FeO?
a. Iron oxide
b. Iron dioxide
c. Iron(III) oxide
d. Iron(II) oxide
3. What is the correct name for Al(NO3)3?
a. Aluminum nitrate
b. Aluminum(III) nitrate
c. Aluminum nitrite
d. Aluminum nitrogen trioxide
4. What is the correct formula of phosphorus trichloride?
a. P2Cl2
b. PCl3
c. PCl4
d. P4Cl2
5. What is the correct formula of lithium perchlorate?
a. Li2ClO4
b. LiClO2
c. LiClO
d. None of these
6. Write the correct name for these compounds.
a. BeC2O4:
b. NH4MnO4:
c. CoS2O3:
7. What is W(HSO4)5?
8. How do you write diphosphorus trioxide?
9. What is H3P?
10. By adding oxygens to the molecule in number 9, we now have H3PO4? What is the name of this molecule?
Answer
1.C; Calcium + Carbonate --> Ca2+ + CO32- --> CaCO3
2.D; FeO --> Fe + O2- --> Iron must have a charge of +2 to make a neutral compound --> Fe2+ + O2- --> Iron(II) Oxide
3.A; Al(NO3)3 --> Al3+ + (NO3-)3 --> Aluminum nitrate
4.B; Phosphorus trichloride --> P + 3Cl --> PCl3
5.D, LiClO4; Lithium perchlorate --> Li+ + ClO4- --> LiClO4
6. a. Beryllium Oxalate; BeC2O4 --> Be2+ + C2O42- --> Beryllium Oxalate
b. Ammonium Permanganate; NH4MnO4 --> NH4+ + MnO4- --> Ammonium Permanganate
c. Cobalt (II) Thiosulfate; CoS2O3 --> Co + S2O32- --> Cobalt must have +2 charge to make a neutral compund --> Co2+ + S2O32- --
> Cobalt(II) Thiosulfate
2.10.5 https://chem.libretexts.org/@go/page/13553
7. Tungsten (V) hydrogen sulfate
8. P2O3
9. Hydrophosphoric Acid
10. Phosphoric Acid
Contributors and Attributions
Pui Yan Ho (UCD), Alex Moskaluk (UCD), Emily Nguyen (UCD)
2.10: Naming Binary, Nonmetal Compounds is shared under a CC BY-NC-SA 4.0 license and was authored, remixed, and/or curated by
LibreTexts.
Nomenclature of Inorganic Compounds is licensed CC BY-NC-SA 4.0.
2.10.6 https://chem.libretexts.org/@go/page/13553
