Scribd
Upload
133 views1 page

Certificat Omologare Presiune Material PP-R Sabic

The document summarizes testing performed by Exova Materials Technology on plastic pipes made of PP-R pipe grade SABIC® VestolenTM P 9421. Hydrostatic pressure testing was conducted according to ISO 9080 to evaluate the long-term hydrostatic strength over 50-100 years at various temperatures. Extrapolated strength values were obtained and an MRS classification of 8 MPa was determined according to ISO 12162.

Uploaded by

sssddss
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
133 views1 page

Certificat Omologare Presiune Material PP-R Sabic

The document summarizes testing performed by Exova Materials Technology on plastic pipes made of PP-R pipe grade SABIC® VestolenTM P 9421. Hydrostatic pressure testing was conducted according to ISO 9080 to evaluate the long-term hydrostatic strength over 50-100 years at various temperatures. Extrapolated strength values were obtained and an MRS classification of 8 MPa was determined according to ISO 12162.

Uploaded by

sssddss
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

EXOVA MATERIALS TECHNOLOGY

Plastic Pipes

CLIENT: Saudi Basic Industries Corporation (SABIC)


REGRESSION ANALYSIS ACCORDING TO ISO 9080
OF THE PP-R PIPE GRADE SABIC® Vestolen™ P 9421

INTRODUCTION RESULTS OBTAINED


Exova offers accredited testing and evaluation The evaluation was performed in accordance
according to ISO 9080, i.e. hydrostatic pressure with ISO 9080:2012. More information can be
testing followed by evaluation of the long-term found in Exova Report P-15/37.
hydrostatic strength and MRS-classification
according to ISO 12162. EXTRAPOLATED STRENGTH VALUES

T Time LPL LTHS


TASK
[°C] [Yrs] [MPa] [MPa]
The aim was to evaluate the pipe grade
20 50.0 8.05 9.80
according to ISO 9080:2012, in order to obtain
a MRS-classification according to ISO 12162 of 20 100 7.44 9.12
the PP-R pipe grade SABIC® Vestolen™ P 9421 70 50.0 2.76 3.38
from SABIC. 70 51.5 2.75 3.37
95 4.12 2.27 2.74
110 1.03 2.02 2.43

CLASSIFICATION
MRS = 8 MPa

Exova Materials Technology This only covers the ISO 9080-evaluation, MRS
Plastic Pipes
T +46 13 16 90 00
classification and material designation. Any
F +46 13 16 90 20 additional requirements for PP-R 80 pipe grade
E [email protected]
[email protected] are given in the relevant product standards.
W www.polymer.exova.com

Ref: BP rev 01-SP 394

You might also like