DAIREN CHEMICAL CORPORATION

VAE Emulsion Products

Vinyl Acetate Ethylene Emulsion
 Introduction of EVA Business Unit
When Dairen Chemical Corporation (DCC) started to manufacture vinyl acetate in 1983, she
has researched and developed the derivatives of vinyl acetate. Therefore DCC succeeded in
manufacturing VAE Emulsion in 1985 and became only VAE Emulsion manufacturer in Asia
besides Japan. Endeavoring in continuous R&D and quality improvement, DCC has enjoyed
a strong brand recognition in the market. Nowadays, the production capacity has reached
330,000 MTY. DCC has become the largest VAE Emulsion manufacturer in Asia and the third
in the world.

In 1994, DCC commenced to manufacture VAE Powder, a white free-flowing Vinyl Acetate-
Ethylene copolymer base powder, is easily redispersible in water to form stable emulsion. The
production capacity has reached 52,000 MTY in 2009. As well, DCC has become the largest
VAE Powder manufacturer in Asia and the third in the world.

In 2004, DCC started to manufacture EVACL & EVCL emulsion and was the only EVACL &
EVCL emulsion manufacturer in Asia.

DCC was divided into two business units. One of them is EVA business unit and there are
three manufacture sites situate at Taiwan (Kaohsiung Ta-She), Malaysia (Johor) and China
(Yizheng) which manufacture VAE emulsion, VAE powder and EVACL/EVCL emulsion. Our
customers are from all over the world, including China, Japan, Korea, India, Southeast Asia,
Australia, America, Europe, etc. With the global market and manufacture, we will dedicate to
provide more competitive and high quality products to meet the diverse needs of our customers.

Manufacture Base of EVA Business Unit

Kaohsiung Jiangsu Malaysia

Product Production Capacity(2011)
Factory Factory Factory

VAE Emulsion 3 3 3 330,000 MTY

VAE Powder 3 3 52,000 MTY

EVACL Emulsion 3 11,000 MTY

 VAE Emulsion is a milky white Vinyl Acetate-Ethylene copolymer emulsion without any
plasticizer. Because of its ethylene content to make a much more flexible film and show increased
affinity to non polar substrates, totally without external plasticization are preferred raw materisls
for formulating adhesives, construction, paint, paper coatings and nonwovens uses.
which also offers the following special characteristics:

1. Initial Adhesive Strength

2. Good Creep Resistance
3. Water Resistance
4. Alkali Resistance
5. Good Thickening Response
6. Operation Safety

Main Application of VAE Emulsion

Substrate
 Grade List
Emulsion Product Application Typical Property
Solid Viscosity* Free
Polymer Adhe- Const- Textile
Grade PSA Paint Content* (cP) pH* Monomer*
Type sive ruction &Paper o
(wt%) (25 C,60rpm) (wt%)

54.5min 4.5~6.5
DA-100 VAE 54~56 1100~1600 4.5~6.5 0.5max

DA-101 VAE 55min 1500~2500 4.5~6.5 0.5max

DA-102 VAE 55min 2500~3700 4.5~6.5 0.5max

DA-102H VAE 55min 3500~4500 4.5~6.5 0.5max

DA-103 VAE 60min 1500~2500 4.5~6.5 0.5max

DA-103H VAE 60min 3200~4200 4.5~6.5 0.5max

DA-104 VAE 55min 2000~3000 4.5~6.5 0.5max

DA-107 VAE 65min 1000~2500 4.5~6.5 1.0max

DA-111 VAE 55min 1500~2500 4.5~6.5 0.5max

DA-117 VAE 65min 500~1500 4.5~6.5 0.1max

DA-125 VAE 55min 2500~3500 4.5~6.5 0.5max

DA-128 VAE 59~61 5000~7500 4.5~6.5 0.5max
DA-141 VAE 55min 1500~2500 4.5~6.5 0.1max
DA-179 VAE 54min 500~1000 4.5~6.5 0.1max
DA-180L VAE 54.5min 500~1000 4.5~6.5 0.5max
DA-183 VAE 55min 1500~2500 4.5~6.5 0.5max
DA-265 VAE+Acrylate 65min 1000~2000 4.5~6.5 1.0max
DA-265H VAE+Acrylate 65min 2000~3000 4.5~6.5 1.0max
DA-310 Carboxylated 60min 1000~2000 3.5~5.5 1.0max
VAE
DA-371 VAE 54~56 500~3500 4.0~6.5 0.05max
DA-502 VAE 54.5min 3000~4000 4.5~6.5 0.5max
DA-511 VAE 55min 1500~2500 4.5~6.5 0.1max
DA-524 VAE 55min 1500~2500 4.5~6.5 0.3max
ǻ1
DA-652 VAE 54~57 15000~20000 4.0~7.0 0.5max
DA-691 VAE 55min 100~500 6.0~7.5 0.5max

Typically use usable 1 25ºC.30rpm

*Marked items are ex-work delivery specification. All other figures are typical physical properties for reference only.
For further information,please contact with our sales team.
Protective Ionic Tg
o
Colloid Type (onset, C)

PVA nonionic 0 DA series is a vinyl acetate-ethylene copolymer emulsion, the ethylene DA-100L
nonionic component provides internal plasticization. DA series have excellent plasticizer DA-100
PVA 0
/solvent thickening response , good adhesion and creep resistance, good water
PVA nonionic 0 DA-101
and alkali resistance etc. , also is suitable for bonding variety of materials
PVA nonionic 0 including PVC, plastic film, synthetic foam, paper, wood, cotton cloth, DA-102

PVA nonionic 0 nylon/polyester fabric, textile and carpet backing etc.Uses in construction field DA-102H
as primer,tile adhesives and grouts, latex-modified concrete/mortar ( polymer DA-103
PVA nonionic 0
modified concrete/mortar).
PVA nonionic 0 DA-103H

PVA nonionic -15 炻 special for low temperature packaging

Low Tg type, flexible adhesive DA-104

PVA nonionic 0 High solid type, general adhesive and construction application DA-107

PVA nonionic 14 High Tg type, general adhesive and construction application DA-111

Cellulose anionic 0 Suitable for joint compounds and decorative coatings DA-117

PVA nonionic -8 Low Tg type, special for low temperature packaging DA-125

PVA nonionic -13 Low Tg type, special for low temperature packaging DA-128

PVA nonionic 0 Similar as DA-101, low free monomer type DA-141

PVA nonionic 0 Excellent compatibility for cement application DA-179

PVA nonionic 0 Excellent compatibility for cement application DA-180L

PVA nonionic 0 Excellent compatibility for cement application DA-183

Cellulose anionic -25 ,

Suitable for PSA (base, or modifier),, plastics lamination adhesive DA-265

Cellulose anionic -25 Suitable for PSA (base or modifier),, plastics lamination adhesive DA-265H

PVA anionic 0 Suitable for packaging, laminating metal bonding especially foil lamination DA-310

PVA anionic 10 Suitable for Low VOC paint application with good scrub-resistance DA-371

PVA nonionic 0 Suitable for packaging, good heat and water resistance DA-502

PVA nonionic 15 Suitable for packaging, good heat and water resistance DA-511

PVA nonionic 20 Suitable for packaging, good heat and water resistance DA-524

PVA nonionic 0 High viscosity type, suitable for no solvent condition DA-652

PVA nonionic 0 Good heat and water-resistance for wood adhesion DA-691
 Package of VAE Emulsion
Packaging Material Capacity 20” Container Load Photo

50 kg OPEN TOP
( 50 kg / drum ) 360 drums (18mt)
HDPE DRUM

100 kg (820M/M)
( 120 kg / drum ) 130 drums (15.6mt)
OPEN TOP IRON DRUM

220 kg ISO OPEN TOP

( 220 kg / drum ) 80 drums (17.6mt)
IRON DRUM

220 kg OPEN TOP

( 220 kg / drum ) 78 drums (17.16mt)
IRON DRUM BLUE

1MT IBC
( 1,000 kg / piece ) 20 cases (20mt)
PAPER CONTAINER

1MT IBC
( 1,000~1,100 kg / piece ) 18 cases (18~19.8mt)
PE CONTAINER

PE FLEXIBLE BAG ( 20,000 kg / piece ) 1 container (20mt)

 Main Products of DCC
SUPPLY SUPPLY

1,4-Butanediol
2-Methyl-1,3-Propanediol
n-Propanol
Iso-Butanol
Polyteramethylene-Ether-Glycol
Tetrahydrofuran

KTS, Kaohsiung Ta-She Factory, Taiwan KTF, Kaohsiung Ta-Fa Factory, Taiwan YML, Yunlin Mai-Liao Factory, Taiwan

DCM, Johor Factory, Malaysia DCJ, Jiangsu Factory, China

- Contact Information -

Head Office:
Location:
9th Floor, No. 301, Song Kiang Road 104, Taipei, Taiwan
Tel: 886-2-7743-1500 ext 530
Fax: 886-2-2509-9619
Web site: www.dcc.com.tw
E-mail: [email protected]

Ta-She Factory:
Location:
No. 1-3, Hsing-Kung Rd, Ta-She Industrial Zone 815,
Kaohsiung, Taiwan
Tel: 886-7-351-4151 ext 240
Fax: 886-7-351-4090
E-mail: [email protected]

Dairen Chemical (Jiangsu) Co., Ltd:

Location:
No.1 Dalian Road, Yangzhou Chemical Industry Park,211900 Yangzhou,
Jiangsu, China
Tel: 86-514-83268888 ext 345
Fax: 86-514-83298855
E-mail: [email protected]

DAIREN CHEMICAL (M) SDN. BHD.

Location:
PLO 18, Tanjung Langsat Industrial Estate, Mukim Sg. Tiram, 81700 Pasir
Gudang, Johor, Malaysia
Tel: 60-7-2565800 ext 240
Fax: 60-7-2565799
E-mail: [email protected]

Dairen Chemical Corporation