0% found this document useful (0 votes)
210 views3 pages

APW-4248 Powdered Antifoam

This document describes XIAMETER® APW-4248 Powdered Antifoam, a silicone-based antifoaming agent for use in powder laundry detergents. It is a free-flowing white powder that is active at low addition levels and provides foam control without performance loss during storage. It can be easily incorporated into detergent powders by dry mixing. Typical addition levels are 0.5-3.5% to control foam throughout the wash cycle at temperatures from 40-95°C. Example detergent formulations demonstrate its effectiveness in phosphate-based, zeolite-based, and high-foaming detergents.

Uploaded by

Elena
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
210 views3 pages

APW-4248 Powdered Antifoam

This document describes XIAMETER® APW-4248 Powdered Antifoam, a silicone-based antifoaming agent for use in powder laundry detergents. It is a free-flowing white powder that is active at low addition levels and provides foam control without performance loss during storage. It can be easily incorporated into detergent powders by dry mixing. Typical addition levels are 0.5-3.5% to control foam throughout the wash cycle at temperatures from 40-95°C. Example detergent formulations demonstrate its effectiveness in phosphate-based, zeolite-based, and high-foaming detergents.

Uploaded by

Elena
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

XIAMETER® APW-4248 Powdered Antifoam

Powdered antifoam containing silicone antifoam compound

FEATURES APPLICATIONS
 Active at low addition levels  In-wash foam-control for laundry powder detergents.
 No performance loss on
storage under warm and TYPICAL PROPERTIES
humid conditions in the Specification Writers: These values are not intended for use in preparing
detergent powder ®
specifications. Please contact your local XIAMETER sales representative
 Free-flowing, non-caking prior to writing specifications on this product.
granules, easy to incorporate
by dry-mixing 1
CTM Test Unit Value
 100% detergent active
0176B Appearance White freeflowing
components
granules
 Suitable for a wide range of
Bulk density g/l 740
surfactants, over a wide range
Granulometry - mean mm 0.500
of pH and washing
particle size
temperatures
Particle size distribution - >1.4mm 5.0 max.
 Performance not dependent % granules
on water hardness >1.0mm 25.0 max.
<0.150mm 13.0 max.
Cake strength zero
1
CTM: Corporate Test Method, copies of CTMs are available on request.

STABILITY incorporate into powder laundry


CHARACTERISTICS IN detergents. Dry mixing is the
DETERGENT POWDER recommended method.
As displayed in Figure 1,
®
XIAMETER APW-4248 Typical addition levels are
Powdered Antifoam is stable between 0.5 and 3.5%.
when stored in the detergent Individual formulations vary,
formulation even under warm particularly with the surfactant
and humid conditions. No level and composition. The
performance loss is observed exact level of addition needs to
between freshly mixed be assessed individually.
composition and a sample
which has been aged during 8 In the three example powder
weeks at 35°C and 70% detergent formulations (Tables
humidity. 1, 2 and 3), XIAMETER APW-
4248 Powdered Antifoam was
DESCRIPTION used to control the foam
XIAMETER APW-4248 throughout the wash cycle
Powdered Antifoam has been (40°C and 95°C wash, 3.5kg
developed to control the foam load). Recommended addition
of powder laundry detergents levels are summarized in Table
generated during the washing 4.
process.

HOW TO USE
XIAMETER APW-4248
Powdered Antifoam is easy to
PRODUCT SAFETY The neat product should inducements to infringe any
INFORMATION preferentially be stored in dry patent.
PRODUCT SAFETY conditions.
INFORMATION REQUIRED Dow Corning’s sole warranty is
FOR SAFE USE IS NOT LIMITATIONS that our products will meet the
INCLUDED IN THIS This product is neither tested sales specifications in effect at
DOCUMENT. BEFORE nor represented as suitable for the time of shipment.
HANDLING, READ PRODUCT medical or pharmaceutical
AND MATERIAL SAFETY uses. Not intended for human Your exclusive remedy for
DATA SHEETS AND injection. Not intended for food breach of such warranty is
CONTAINER LABELS FOR use. limited to refund of purchase
SAFE USE, PHYSICAL, price or replacement of any
ENVIRONMENTAL, AND product shown to be other than
LIMITED WARRANTY as warranted.
HEALTH HAZARD
INFORMATION. THE
INFORMATION –
MATERIAL SAFETY DATA PLEASE READ DOW CORNING
SHEET IS AVAILABLE ON CAREFULLY SPECIFICALLY DISCLAIMS
THE XIAMETER WEB SITE AT The information contained ANY OTHER EXPRESS OR
WWW.XIAMETER.COM. herein is offered in good faith IMPLIED WARRANTY OF
and is believed to be accurate. FITNESS FOR A
However, because conditions PARTICULAR PURPOSE OR
STORAGE MERCHANTABILITY.
Product should be stored at or and methods of use of our
below 30°C in original, products are beyond our
control, this information should DOW CORNING DISCLAIMS
unopened containers. The most LIABILITY FOR ANY
up-to-date shelf life information not be used in substitution for
customer’s tests to ensure that INCIDENTAL OR
can be found on the CONSEQUENTIAL DAMAGES
XIAMETER Web site in the our products are safe, effective,
Product Detail page under and fully satisfactory for the
Sales Specification. intended end use. Suggestions
of use shall not be taken as

Table 1: Example of phosphate-based detergent

Quantity
STPP 60g
Sodium perborate tetrahydrate 50g
AEO - Alcohol ethoxylates C10-C16 (100% active) 4.2g
LAS - Sodium dodecyl benzenesulfonate (80% active) 21.8g

Table 2: Example of zeolite-based detergent

Quantity
Zeolite A 30g
Sodium perborate monohydrate 20g
Sodium carbonate 20g
Sodium sulphate 7.5g
AEO - Alcohol ethoxylates C10-C16 (100% active) 10g
LAS - Sodium dodecyl benzenesulfonate (80% active) 12.5g

XIAMETER® APW-4248 Powdered Antifoam 2011, November 9 XIAMETER is a registered trademark of Dow Corning Corporation.
Form No.95-813-01 Dow Corning is a registered trademark of Dow Corning Corporation.
©2011 Dow Corning Corporation. All rights reserved.
Table 3: Example of high foaming zeolite-based detergent

Quantity
Zeolite A 30g
Sodium perborate monohydrate 20g
Sodium carbonate 18g
Polycarboxylate (40% active) 7.5g
Sodium silicate solution (38% active) 5.25g
FAS - Sodium C16-C18 sulfate (91% active) 11g
AES - Sodium lauryl ethersulfate (70% active) 2.85g
AEO - Alcohol ethoxylates C10-C16 (100% active) 8g
APG - Fatty alcohol C12-C14 polyglycoside (51.5% active) 7.75g

Table 4: Recommended addition levels

®
Formulation (Surfactants/Builder) XIAMETER APW-4248 Powdered
Antifoam recommended addition level
(%) Washing Temperature
40°C 95°C
1 LAS (13.25%) - AEO (3.2%) on STPP 2.6 0.8
2 LAS (10%) - AEO (10%) on zeolite 1.3 0.6
3 FAS (10%) - AES (2%) - AEO (8%) – APG (4%) on zeolite 3.4 3.7
Water hardness = 17ºF
ATTENTION: Sample formulations are provided for illustrative purposes only. Dow Corning does not warrant their merchantability, fitness
for use, performance, efficacy, safety or freedom from patent infringement. They are not commercial formulations and have not been
subjected to extensive testing. It is your responsibility to thoroughly test any formulation before use.

Figure 1: Stability characteristics in detergent powder

XIAMETER® APW-4248 Powdered Antifoam 2011, November 9 XIAMETER is a registered trademark of Dow Corning Corporation.
Form No.95-813-01 Dow Corning is a registered trademark of Dow Corning Corporation.
©2011 Dow Corning Corporation. All rights reserved.

You might also like