10/31/23, 5:11 PM Top 40 Power System Interview Questions (2023) - javatpoint

Home Interview Questions Java SQL Python JavaScript Angular

https://www.javatpoint.com/power-system-interview-questions 1/14
10/31/23, 5:11 PM Top 40 Power System Interview Questions (2023) - javatpoint

Power System Interview Questions

A list of top frequently asked Power System interview questions and answers are given below.

1) What is the Power plant or Power Station?

The generation, distribution, and transmission system together constitute a network called as Power
plant. The power plant uses the form of energy such as coal, diesel and converts it into electrical
energy. An example of the power system is a grid that supplies power to the other system.

2) What do you mean by the zone of protection?

The protection is provided in the system to protect each and every element of the power system. If
any fault occurs in the system then the relays associated with it trip all the circuit breaker so that the
faulty element gets removed from the power system. This Security provided to the system is called
the 'Zone of protection'.

3) What is the difference between the Transmission line and distribution

line?

The main work of transmission line and distribution line is to transfer power from one place to
another but the difference between transmission and distribution line is based on the factors like
the type of phase, the distribution line because the wire for transmission line is thick and for
distribution line is thin, the transmission line requires three phase supply for carrying electricity and
distribution line requires single phase supply for carrying electricity.

4) What are the common sources of energy?

The common sources of energy are:

Sun.

Water.

Waterhead.

Fuel.

Nuclear Energy.

https://www.javatpoint.com/power-system-interview-questions 2/14
10/31/23, 5:11 PM Top 40 Power System Interview Questions (2023) - javatpoint

5) Write down the classification of the transmission line?

Depending upon the voltage and length of the conductor the classification of the transmission line
is as follows:

1. A.C Transmission Line.

Short transmission line.

Medium transmission line.

Pi model of a medium transmission line.

T model of a medium transmission line.

Long transmission line.

AD

2. D.C Transmission Line.

6) What is a Relay?

The Relay is an automatic device that senses the abnormal condition of the electrical circuit and
closes its contact.

7) How many types of Protection relays are there based on the

Characteristic?

On the basis of a characteristic, protection relays can be categorized as follows:

Definite time relays.

IDMT (Inverse time relays with definite minimum time).

Instantaneous relays.

IDMT with inst.

Stepped Characteristic relays.

Programmed Characteristic relays.

Voltage Restraint overcurrent relays.

https://www.javatpoint.com/power-system-interview-questions 3/14
10/31/23, 5:11 PM Top 40 Power System Interview Questions (2023) - javatpoint

8) What is meant by Reset level of the Relay?

The value of current or voltage below which the relay opens it contact is called the reset level of
the relay.

9) What are the internal and external faults?

Internal faults are the faults that occur inside the zone and external faults are the faults that occur
outside the zone of protection.

10) How many types of faults are there in 3 phase power system?

The faults that occur in the three-phase power system are as follows:

Single line to ground (LG) fault

Line to line (LL) fault

Double line to ground (LLG) fault

Three Phase short circuit (LLL) fault

Three phase to ground (LLLG) fault

11) What do you mean by reach and reach the point of the relay?

The reach point is the farthest point from the relay which is still inside the zone of protection and
reach is the distance between the reach point and relay.

12) Why does the adjacent zone of protection overlap?

Adjacent zone of protection overlap because if we do not overlap then some portion of the power
system will be left out unprotected.

13) What is Electrical Grounding?

Electrical grounding or merely grounding is a safety measure used to prevent people accidentally
coming in contact with the hazardous electrical faults.

https://www.javatpoint.com/power-system-interview-questions 4/14
10/31/23, 5:11 PM Top 40 Power System Interview Questions (2023) - javatpoint

14) What is Electrical Earthing?

Electrical earthing is a process of transferring the immediate discharge of the electrical energy
directly to the earth by the help of low resistance wire.
AD

15) How many types of electrical earthing are there?

Electrical earthing is of two types:

1. Neutral Earthing.

2. Equipment Earthing.

16) What is the difference between Electrical earthing and Electrical

grounding?

The difference between electrical earthing and electrical grounding is that in grounding the current
carrying part is connected to the ground, whereas in earthing the non-current carrying part is
connected to the ground. Grounding does not have zero potential but earthing has zero potential.

17) What is the importance of earthing?

Earthing is important because of the given below reasons:

1. Earthing protects the person from the short circuit current.

2. Earthing provides the easiest path of flow for short-circuit current at the time of insulation
failure.

3. Earthing protects the persons and apparatus from the high voltage surges and lightning
discharge.

18) What is meant by Sag?

'Sag' is the difference in level between the points of support and the lowest point on the conductor.

https://www.javatpoint.com/power-system-interview-questions 5/14
10/31/23, 5:11 PM Top 40 Power System Interview Questions (2023) - javatpoint

19) What is Corona?

'Corona' is the phenomenon of violet glow, hissing noise, and production of ozone gas in an
overhead transmission line.
AD

20) Draw the Single Line Diagram of the Power Station?

21) How do you select the pickup value of the relay?

The pickup value of the relay should be more than the maximum load and it should allow the
normal load as well as the certain degree of overload to be supplied. The relay should be sensitive
enough to respond to the smallest fault, therefore, the pickup value should be less than the smallest
fault current.

22) What is the difference between a fuse and a breaker?

The difference between Fuse and a circuit breaker is that fuse works on the principle of the thermal
and electrical properties of the conducting materials, whereas the circuit breaker works on the
principle of electromagnetism and switching principle. We can use the fuses only once but circuit
breakers can be used many more times, and the breaking capacity of the fuse is low as compared
with the circuit breaker.

23) What is the difference between the relay and the circuit breaker?

The difference between the relay and the circuit breaker is that relay is a switching device that gives
the signal to the circuit breaker in case of fault occurrence, whereas circuit breaker breaks the circuit
automatically when receives the signal.

https://www.javatpoint.com/power-system-interview-questions 6/14
10/31/23, 5:11 PM Top 40 Power System Interview Questions (2023) - javatpoint

24) What is the difference between resistance grounding system and

resistance earthing system?

In resistance grounding, one or more resistance is connected to the neutral of the system.
Resistance winding limits the fault current and protects the system from transient overvoltages. The
arcing ground risk is decreased by the resistance grounding and permits the ground fault
protection, whereas resistance earthing system is provided in electric equipment to protect the
equipment from the occurrence of the fault in the system.

25) What is Primary and Backup protection?

Primary protection also known as main protection is the first line of protection which provides quick
acting and clearing of the fault within the boundary of the elements it protects. In the electrical
installation, the primary protection is provided to each section. Whereas the backup protection
provides the backup to the primary or main protection whenever it fails in operation and cut out for
repair. For the proper functioning of the electrical system back up protection is essential.

26) What is meant by Bus Bar Protection?

When the fault occurs on the bus bar, then the whole of the supply gets interrupted, and all the
feeders are disconnected in this case Busbar protection is provided to the system to eliminate the
occurrence of these faults. For removing the faults the entire circuits connecting the faulty section
needs to be open.

27) How many types of fault occur in a 3-phase power system?

Electrical faults are the deviation of voltage and current from normal values. There are two types of
faults that occur in a three-phase system.

1. Symmetrical faults.

2. Unsymmetrical faults.

28) What are the effects of Electrical Faults?

The effects of electrical faults are as follows:

1. Overcurrent flow- During fault occurrence high current flows in the system and which leads
to tripping of relays, damaging insulation and components of the equipment.

2. The danger to operating personnel- Fault can also affect the individual working there, and
severity of the fault depends upon the voltage and current at the point of fault.
https://www.javatpoint.com/power-system-interview-questions 7/14
10/31/23, 5:11 PM Top 40 Power System Interview Questions (2023) - javatpoint

3. Loss of equipment- Heavy current due to short circuit faults result in the burning of
equipment completely which leads to improper working of equipment or device.

4. Disturbed interconnected active circuits- During the occurrence of fault the active,
connected components of the system also get disturbed.

29) Give some example of fault limiting devices?

Some examples of fault limiting devices are as follows:

1. Circuit Breaker- It is a device which works in normal condition and breaks when an abnormal
condition occurs.

2. Fuse- A fuse is a thin wire enclosed in a casing or glass which connects two metal parts. It is
used as a primary protection device.

3. Relay- It is a condition based operating switch which opens its contact when an abnormal
condition occurs.

4. Lighting power protection devices- These are the devices that are used to protect the
system from surge voltages or lighting like- lightning arrestors and grounding devices.

30) When are the directional relays used?

In ring main feeder system, single end fed system of parallel feeders directional relays are used.

31) What are the causes of electrical faults?

The causes of electrical faults are as follows:

1. The existing weather conditions like lightning strikes, heavy rains, heavy winds, salt deposition
on overhead lines and conductors etc. interrupts the powers supply and damages the
damages the electrical installations.

2. Malfunctioning, aging, insulation failure of cables and winding leads to failure of equipment
like generators, motor, transformer.

3. Electrical faults are also caused because of human errors such as selecting an improper rating
of equipment, switching the circuit while it is under servicing etc.

32) What is Skin Effect?

The tendency of an alternating electric current (A.C) to get distributed within a conductor such that
the current density becomes largest near the surface of the conductor, and decreases with greater
depth in the conductor, is called as "Skin Effect."
https://www.javatpoint.com/power-system-interview-questions 8/14
10/31/23, 5:11 PM Top 40 Power System Interview Questions (2023) - javatpoint

33) What is the bundle conductor?

A bundle conductor consists of two or more parallel subconductors at a spacing of several

diameters.

34) What is the use of bundle conductors?

Bundle conductors are used to reducing the Corona and Skin effect.

35) What are the commonly used schemes for the bus zone protection?

The commonly used schemes for the protection are:

Backup Protection.

Differential overcurrent protection.

Circulating current protection.

Voltage overvoltage protection.

Frame leakage protection.

36) What are the internal and external faults?

Internal faults are the faults that occur within the zone of protection and external faults are the
faults that occur outside the zone of protection.

37) What are the advantages of a Three-Phase system over a Single-Phase

System?

The advantages of the three-phase transformer over a single-phase transformer are as follows:

1. In the three-phase system, the power delivered is constant whereas the power delivered in
the single-phase system is pulsating in nature.

2. The three-phase induction motors are self-starting and more efficient whereas the single-
phase motor is not self-starting and requires an auxiliary means for the start of motor.

3. The output of the three-phase machine is higher than a single-phase machine for a given size
of a frame.

4. Three phase motors have higher power factor whereas the single phase motors have low
power factor.

https://www.javatpoint.com/power-system-interview-questions 9/14
10/31/23, 5:11 PM Top 40 Power System Interview Questions (2023) - javatpoint

38) What is Critical disruptive Voltage?

The minimum phase to a neutral voltage that is required for corona discharge to start is called the
Critical disruptive voltage. In this, the corona discharge means the current discharge in the air.

Critical Disruptive Voltage:

Vc = μ x ß x[r log (d/r)]

Where the value of surface irregularity factor μ for a different surface condition is as follows:

Surface Condition Value of Surface Irregularity Factor μ

Polished Surface 1

Conductor with dust deposit 0.92 to 0.98

Stranded Conductor 0.8 to 0.87

39) What is a Slack bus?

A slack bus also known as reference bus or swing bus balances the active and reactive power of the
system. The slack bus serves as angular reference for all the buses in the system.

40) How many methods use the load flow solution?

The method that uses the load flow analysis is as follows:

Gauss-Seidel method using Y bus

Newton- Raphson method (NR)

Power flow through slack bus and line.

Decouple load flow method

Fast Decouple load flow method.

https://www.javatpoint.com/power-system-interview-questions 10/14
10/31/23, 5:11 PM Top 40 Power System Interview Questions (2023) - javatpoint
AD

You may also like:

Java Interview Questions

SQL Interview Questions
Python Interview Questions
JavaScript Interview Questions
Angular Interview Questions
Selenium Interview Questions
Spring Boot Interview Questions
HR Interview Questions
C Programming Interview Questions
C++ Interview Questions
Data Structure Interview Questions
DBMS Interview Questions
HTML Interview Questions
IAS Interview Questions
Manual Testing Interview Questions
OOPs Interview Questions
.Net Interview Questions
C# Interview Questions
ReactJS Interview Questions
Networking Interview Questions
PHP Interview Questions
CSS Interview Questions
Node.js Interview Questions

https://www.javatpoint.com/power-system-interview-questions 11/14
10/31/23, 5:11 PM Top 40 Power System Interview Questions (2023) - javatpoint

Spring Interview Questions

Hibernate Interview Questions
AWS Interview Questions
Accounting Interview Questions

Learn Latest Tutorials

Splunk tutorial SPSS tutorial Swagger T-SQL tutorial

tutorial
Splunk SPSS Transact-SQL
Swagger

Tumblr tutorial React tutorial Regex tutorial Reinforcement

learning tutorial
Tumblr ReactJS Regex
Reinforcement
Learning

R Programming RxJS tutorial React Native Python Design

tutorial tutorial Patterns
RxJS
R Programming React Native Python Design
Patterns

Python Pillow Python Turtle Keras tutorial

tutorial tutorial
Keras
Python Pillow Python Turtle

Preparation

Aptitude Logical Verbal Ability Interview

Reasoning Questions
Aptitude Verbal Ability
Reasoning Interview Questions

Company
Interview
Questions
Company Questions
https://www.javatpoint.com/power-system-interview-questions 12/14
10/31/23, 5:11 PM Top 40 Power System Interview Questions (2023) - javatpoint

Trending Technologies

Artificial AWS Tutorial Selenium Cloud

Intelligence tutorial Computing
AWS
Tutorial tutorial
Selenium
Artificial Cloud Computing
Intelligence

Hadoop tutorial ReactJS Data Science Angular 7

Tutorial Tutorial Tutorial
Hadoop
ReactJS Data Science Angular 7

Blockchain Git Tutorial Machine DevOps

Tutorial Learning Tutorial Tutorial
Git
Blockchain Machine Learning DevOps

B.Tech / MCA

DBMS tutorial Data Structures DAA tutorial Operating

tutorial System tutorial
DBMS DAA
Data Structures Operating System

Computer Compiler Computer Discrete

Network tutorial Design tutorial Organization and Mathematics
Architecture Tutorial
Computer Network Compiler Design
Computer Discrete
Organization Mathematics

Ethical Hacking Computer Software html tutorial

Tutorial Graphics Tutorial Engineering
Web Technology
Tutorial
Ethical Hacking Computer Graphics
Software
Engineering

Cyber Security Automata C Language C++ tutorial

tutorial Tutorial tutorial
C++
https://www.javatpoint.com/power-system-interview-questions 13/14
10/31/23, 5:11 PM Top 40 Power System Interview Questions (2023) - javatpoint

Cyber Security Automata C Programming

Java tutorial .Net Python tutorial List of

Framework Programs
Java Python
tutorial
Programs
.Net

Control Data Mining Data

Systems tutorial Tutorial Warehouse
Tutorial
Control System Data Mining
Data Warehouse

AD

https://www.javatpoint.com/power-system-interview-questions 14/14