DA-53T
Compact 4-axes touch
colour CNC system for
press brakes
Compact without compromise
The DA-53T touch CNC control provides a
modern compact and versatile solution for a
wide range of press brake applications without
compromising machine functionality.
The DA-50T-series offers easiest CNC USB interfacing enables fast product and
programming based on the Delem tool backup using USB memory sticks.
graphical touch screen user interface.
The new compact DA-53T adds a state The standard machine control functions
of the art complete touch control solution are Y1-Y2, X, R-axis and crowning. The
for synchronized press brakes. second back gauge axis can also be set
as Z axis.
This panel based control, standard
capable of controlling up to 4 axes, can DA-53T features:
be integrated in cabinets as well as “Hot-key” touch navigation
used in an optional pendulant arm
housing. Its 10.1" wide screen high 10.1" high resolution colour TFT
resolution colour TFT, with industrial Up to 4 axes (Y1,Y2 + 2 aux.
grade multi touch technology, gives axes)
access to the proven Delem user- Crowning control
interface. It enables direct “hot-key”
touch navigation between product Tool / material / product library
programming and actual production. Servo and frequency inverter
Functions are located where needed, control
offering optimised ergonomics Advanced Y-axis control
throughout the entire application. algorithms for closed-loop as well
as open-loop valves.
Machine adjustment and test bends are
reduced to a minimum with a quick and TandemLink (option)
easy program-to-production work USB memory stick interfacing
sequence. Profile-53TL offline software
Everything under control
Specifications DA-53T
Product configuration
Standard Factory option
- Colour high brightness LCD display - Pendulant arm type housing
- 10.1" wide screen TFT
- LED backlight Field options
- 1024 x 600 pixels
- TandemLink
- Industrial grade touch screen
- Storage capacity 1 GB
- Data backup / restore via USB
- USB flash memory stick
- Integrated valve amplifier
- Power-down memorisation
- Profile-53TL offline software
Panel type housing DA-53T-P
Ordering information
- DA-53T, CNC in robust housing
- DA-53T-P, CNC panel version
Technical specification
General Programming Computed
- Multi touch industrial touch screen - Alphanumerical product naming - Tooling safety zones
- Instant Shut Off - Hemmed products programming - Press force
- Radius programming (bumping) - Bend allowance
Electrical / interfacing - One page programming table - Crowning adjustment
- Power supply: 24V - Programmable material properties - Bottoming force
- Opto-isolated digital I/O - Programmable axis speed - Hemming force
- Integrated valve amplifier Y1, Y2, P - Millimetres/Inches, kN/Ton selection - Auto bumping calculation
- Encoder inputs (single/diff.5V/12V) - Stock counter - Learned angle correction database
- RS232 port for safety PLC
- USB port Tooling Miscellaneous
- Tool library 30 punches / 30 dies - ‘Teach-in’ on all axes
Control - Alphanumeric tool identification - Operator selectable dialogue
- Servo control - Hemming tools languages
- Unipolar / frequency inverter control - Radius tools - Error messaging system
- Pressure valve control - Diagnostic program
- Proportional valve control - Machine time + stroke counter
- Crowning control - On board Analysis Tool
- Multiple digital function outputs - Sequencer functionality (PLC)
- Safety PLC interfacing
Mechanical
- Housing 373x368x122 mm
- Panel 311x222x60mm
- Design, glass surface, aluminium
edge
- IP54
- Weight 9 kg (incl. housing)
8087-915/E
Luchthavenweg 42, 5657 EB Eindhoven
The Netherlands www.delem.com
T: +31(0)40 2552969, F: +31(0)40 2551923
Everything under control
