NOKIA Nokia Networks LTE Radio Access, Rel. RL70, Operating Documentation, Issue 01 Flexi Multiradio BTS RF Module and Remote Radio Head Description DNO951745 Issue 08 Approval Date 2014-11-27Flexi Multiradio BTS RF Module and Remote Radio Head Description ‘The information in this document epplies solely to the hardwarelsoftware product (‘Product’) specified herein, and only as specified herein This document is intonded for uso by Nokia Solutions and Networks’ customers ("You") only, and it may not ‘be used excep! forthe purposes detinad in the agreement between You and Nokia Solutions and Networks (Agreement?) under which this document is distributed. No part of this document may be used, copied, reproduced, modified or transmitted in any form or means without the prior written permission of Nokia Solutions and Networks. if you have not entored into an Agrosmant applicable to the Product, ori that ‘Agreement fas expited of hes been terminated, You may not use this document in any manner end You {are obliged to return it to Nokia Solutions and Networks and destroy or delete any copies thereof, ‘The document has been prepared to be used by professional and property trained personnel, and You ‘assume full responsibly when using it Nokia Solutions and Networks welcome Your comments as part of the process of continuous development and improvernent ofthe documentation This document and its contenis are provided as @ convenience to You. Any information or statements conceming the suitailly, capacity, finess for purpese or performance of the Product are given solaly on ‘an “as is” and “as available" besis in this document, and Nokia Solutions and Networks reserves the right fo change any such information and statements without notice. Nokia Solutions and Networks has made all reasonable efforts to ensure that the content ofthis document is adequate and free of material errors and ‘omissions, and Nokia Solutions and Networks will corect errors that You identify in this document. But Nokia Solutions and Networks’ total iabilty for any errors in the document is stictly limited tothe correction fof such error(s). Nokia Solutions and Networks does not warrant thatthe use ofthe software in the Product ‘wll be uninterrupted or error-free, NO WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY OF AVAILABILITY, ACCURACY, RELIABILITY, TITLE, NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, |S MADE IN RELATION TO THE CONTENT OF THIS DOCUMENT. INNO EVENT WILL NOKIA SOLUTIONS AND NETWORKS BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO SPECIAL, DIRECT, INDIRECT, INCIDENTAL OR CONSEQUENTIAL OR ANY LOSSES, SUGH AS BUT NOT LIMITED TO LOSS OF PROFIT, REVENUE, BUSINESS INTERRUPTION, BUSINESS OPPORTUNITY OR DATA THAT MAY ARISE FROM THE USE OF THIS DOCUMENT OR THE INFORMATION IN IT, EVEN IN THE CASE OF ERRORS IN OR OMISSIONS FROM THIS DOCUMENT OR ITS CONTENT. ‘This dooument is Nokia Solutons and Networks’ proprietary and confidential information, which may not be distbuted or disclosed to any third partios without the prior written consent of Nokia Solutons and Networks. Nokia is @ registered trademark of Nokia Corporation. Otner product names mentioned in this document may be trademarks of their respective owners, and they ere mentioned for identficetion purposes only. ‘Copyright © 2014 Nokia Solutions and Networks. All rights reserved ZX Important Notice on Product Safety This product may present safely rsks due to laser, eect, Nea, and other sources of danger. Only trained and qualified personnel may instal, operate, maintain or otherwise handle this product and only after heving carefully read the safety information epplicabe to this product. ‘The safely information Is provided in the Safety Information section in the “Legel, Safety and Environmental Information’ part ofthis document or documentation sot Nokia Solutions and Networks is continually stiving to reduce the adverse environmental effects ofits products and services. We would like to encourage you as our customers and users to join us in working towards a cleaner, safer environment. Ploase recycle product packaging and follow the recommendations for power use and proper disposal of our products and their components. Iryou should have questions regarcing our Environmental Policy oF any of the environmental services we offer, please contect us et Nokia Solutions and Networks for any additional information. DNO951745, Issue: 08Flexi Multiradio BTS RF Module and Remote Radio Head Description Issue: 08 Table of Contents This document has 227 pages oe on © oro 1" 12 13 14 15 16 7 18 19 20 21 22 23 24 25 Summary of changes RSS-310 compliance EU RoHS statement CE marking, FCC Part 15 compliance. Flexi RF Module 3TX 800 (FRMA) Flexi RF Module 3TX 800 (FRMD). Flexi RFM 3:pipe 850 180W (FXCA) Flexi RF Module 3TX 900 (FXDA), Flexi RF Module 3TX 900 (FXDJ), Flexi RF Module 3TX 1800 (FXEA). Flexi RF Module 3TX 1900 (FXFB). Flexi RF Module 3TX 2100 (FRGP). Flexi RF Module 3TX 2600 (FRHA). Flexi RF Module 3TX 1700/2100 (FRIE) Flexi RF Module 3TX 850 (FXCB), Flexi RF Module 3TX 900 (FXDB), Flexi RF Module 3TX 1800 (FXEB).. Flexi RF Module 3TX 1900 (FXFC). Flexi RFM 3-pipe 900 240W (FXJB), Flexi RF Module 3TX 2100 (FRGT). Flexi RF Module 3TX 2100 (FRGS). Flexi RF Module 6TX 700 (FRA) Flexi RF Module 6TX 700 (FRPB), Flexi RF Module 6TX 2600 (FRHC). Flexi RF Module 6TX 2600 (FRHF), DN0951745 16 "7 18 19 20 21 26 31 a7 42 aT 52 58 63 68 73 79 84 20 102 108 14 119 124 128Flexi Multiradio BTS RF Module and Remote Radio Head Description 26 ar 28 29 30 34 32 33 34 36 36 37 38 39 40 44 42 43 44 Flexi RF Module 6TX 800 (FRMC) 134 Flexi RFM 6-pipe 1800 360W (FXED). 138 Flexi Remote Radio Head 2TX 850 (FHCA) 145 Flexi Remote Radio Head 2TX 730 (FRLB). 150 Flexi RRH 2-pipe 800 80W (FDA) 155 Flexi Remote Radio Head 2TX 1800 (FHEA). 160 Flexi Remote Radio Head 2TX 2100 (FRGQ), 165 Flexi Remote Radio Head 2TX 2600 (FRHB). 170 Flexi Remote Radio Head 2TX 800EU (FRMB) 175 Flexi Remote Radio Head 2TX 1800 (FHEB). 180 Flexi RRH 2-pipe 1800 120W (FHEF). 186 Flexi Remote Radio Head 2TX 900 (FHDB) 191 Flexi Remote Radio Head 2TX 2100 (FRGY). 196 Flexi Remote Radio Head 4TX 1700/2100 (FRIG). 201 Flexi Remote Radio Head 4TX 2600 (FRHD). 207 Flexi Remote Radio Head 47X 2600 (FRHE). 213 Flexi RRH 4-pipe 1800 160W (FHFB). 219 Compliance with EMC, RF, and safety 225 Avoiding Passive Intermodulation during RF Module and RRH operation 227 DNO951745, Issue: 08Flexi Multiradio BTS RF Module and Remote Radio Head Description Issue: 08 List of Figures Figure 4 Figure 2 Figure 3 Figure 4 Figure 5 Figure 6 Figure 7 Figure 8 Figure 9 Figure 10 Figure 11 Figure 12 Figure 13 Figure 14 Figure 15 Figure 16 Figure 17 Figure 18 Figure 19 Figure 20 Figure 21 Figure 22 Figure 23 Figure 24 Figure 25 Figure 26 Figure 27 Figure 28 Figure 28 Figure 30 Figure 31 Figure 32 Figure 33 Figure 24 Figure 35 Figure 36 Figure 37 Figure 28 List of countries respecting EU Directive 1999/5/EC. FRMA interfaces, FRMA functional block diagram, FRMD interfaces. FRMD funetional block diagram FXCA interfaces, FXCA functional block diagram. FXDA interfaces FXDA functional block diagram. FXDJ interfaces, FXDJ functional block diagram FXEA interfaces FXEA functional block diagram. FXFB interfaces. FXFB functional block diagram. FRGP interfaces. FRGP functional block diagram. FRHA interfaces. FRHA functional block diagram. FRIE interfaces, FRIE functional block diagram FXCB interfaces, FXCB functional block diagram. FXDB interfaces, FXDB functional block diagram FXEB interfaces FXEB functional block diagram. FXFC interfaces FXFC functional block diagram. FXAB interfaces FXJB functional block diagram, FRGT interfaces. FRGT functional block diagram. FRGS interfaces. FRGS functional block diagram. FRPA interfaces FRPA functional block diagram. FRPB interfaces, DN0951745 19 24 22 26 ar 3 33 37 38 42 43 aT 48 82 54 58 58 63 68 62 73 18 79 S828 92 98 103 104 108) 110 114 115 119Flexi Multiradio BTS RF Module and Remote Radio Head Description Figure 39 Figure 40 Figure 41 Figure 42 Figure 43 Figure 44 Figure 45 Figure 46 Figure 47 Figure 48 Figure 49 Figure 50 Figure 51 Figure 52 Figure 53 Figure 54 Figure 85 Figure 56 Figure 57 Figure 58 Figure 59 Figure 60 Figure 61 Figure 62 Figure 63 Figure 64 Figure 65 Figure 66 Figure 67 Figure 68 Figure 69 Figure 70 Figure 71 Figure 72 Figure 73 Figure 74 Figure 75 Figure 76 Figure 77 FRPB functional block diagram. FRHC interfaces. FRHC functional block diagram, FRHF interfaces. FRHF functional block diagram. FRMC interfaces. FRMC funetional block diagram. FXED interfaces... “ FXED functional block diagram. FHCA interfaces. FHCA functional block diagram. FRLB interfaces. FRLB functional block diagram. FHDA interfaces. FHDA functional block diagram. FHEA interfaces. FHEA functional block diagram. FRGO interfaces. FRGQ functional block diagram. FRHB interfaces. FRHB functional block diagram. FRMB interfaces. FMB functional block diagram. FHEB interfaces. FHEB functional block diagram. FHEF interfaces, FHEF functional biock diagram. FHDB interfaces. FHDB functional block diagram. FRGY interfaces FRGY functional block diagram. FRIG interfaces, FRIG functional block diagram. FRHD interfaces. sss FRHD functional block diagram. FRHE interfaces FRHE functional block diagram. FHEB interfaces. FHFB functional block diagram. DNOS51745 120 124 125 120 130 134 135 139 141 145 148 150 151 155 156 160 161 165 166 170 AT 175 176 181 182 186 187 191 192 196 197 201 203 207 209 213 215 219 221 Issue: 08Flexi Multiradio BTS RF Module and Remote Radio Head Description Issue: 08 List of Tables Table 1 FRMA functional specification. Table2 RMA interfaces. Table 3 FRMA ALD support. Table 4 FRMA electrical specifications. Table FRA power consumption. Table 6 FRMA installation and mechanical specifications. Table 7 FRMA dimensions and weight. Table 8 FRGS environmental specifications. Table9 —- FRMALEDs..... os Table 10 FRMD functional specification. Table 11 FRMD interfaces. Table 12. FRMD ALD support. Table 13. FRMD electrical specifications. Table 14 FRMD power consumption. Table 15, FRMD installation and mechanical specifications. Table 16 FRMD cimensions and weight Table 17, FRMD environmental specifications. Table 18 FRMD LEDs. Table 19 FXCA functional specification. Table 20 FXCA interfaces. Table21 FXCA ALD support. Table 22 FXCA electrical specifications. Table 23, FXCA power consumption. Table 24, FXCA installation and mechanical specifications. Table 25, FXCA dimensions and weight. Table 26 FXCA environmental specifications. Table 27, FXCA LEDs. ceca Table 28 FXDA functional specification. Table 29 FXDA interfaces. Table 30 FXDA ALD support. Table 31 FXDA electrical specifications. Table 32 FXDA power consumption. Table 33, FXDA installation and mechanical specifications. Table 34 FXDA dimensions and weight. Table 35, FXDA environmental specifications. Table 36. FXDA LEDs. Table 37, FXDJ functional specification. Table 38 FXD4 interfaces. DN0951745 24 oA 22 23 23 23 2B 24 24 28 26 ar 28 28 28 28 29 29 on 32 32 33, geeks on ST 37 38 39 38 30 38 40 40 42 42Flexi Multiradio BTS RF Module and Remote Radio Head Description Table 39 Table 40 Table 41 Table 42 Table 43 Table 44 Table 45 Table 46 Table 47 Table 48 Table 49 Table 50 Table 51 Table 52 Table 53 Table 54 Table 55 Table 56 Table 57 Table 58 Table 59 Table 60 Table 61 Table 62 Table 63 Table 64 Table 65 Table 66 Table 67 Table 68 Table 69 Table 70 Table 71 Table 72 Table 73 Table 74 Table 75 Table 76 Table 77 Table 78 FXDJ ALD support, FXDJ electrical specifications. FXDJ power consumption. FXD4 installation and mechanical specifications. FXD\ dimensions and weight. FXDJ environmental specifications, FXDJ LEDs. FXEA funetional specification. FXEA interfaces, FXEA ALD support. FXEA electrical specifications. FXEA power consumption FXEA installation and mechanical specifications FXEA dimensions and weight FXEA environmental specifications. FXEA LEDs. FXFB functional specification FXFB interfaces. FFB ALD support. FXFB electrical specifications. FXFB power consumption FXFB installation and mechanical specifications. FXFB dimensions and weight. FXFB environmental specifications FXFB LEDs. FRGP functional specification. FRGP interfaces FRGP ALD support. FRGP electrical specifications FRGP power consumption FRGP installation and mechanical specifications. FRGP dimensions and weight. FRGP environmental specifications. FRGP LEDs. FRHA functional specification FRHA interfaces. FRHA ALD support FRHA electrical specifications. FRHA power consumption FRHA installation and mechanical specifications. DNO951745, 43 44 44 44 44 45 45 a7 a7 48 49 49 49 49 50 50 52 52 53 54 54 55 55 55 55 58 58 59 60 60 60 60 61 61 63 63 6a 65 6 6 Issue: 08Flexi Multiradio BTS RF Module and Remote Radio Head Description Issue: 08 Table 79 Table 80 Table 81 Table 82 Table 83 Table 84 Table 85 Table 86 Table 87 Table 88 Table 89 Table 90 Table 91 Table 92 Table 03 Table 94 Table 95 Table 96 Table 97 Table 98 Table 99 Table 100 Table 101 Table 102 Table 103, Table 104 Table 105 Table 106 Table 107 Table 108 Table 109 Table 110 Table 111 Table 112 Table 113 Table 114 Table 115 Table 116 Table 117 Table 118 FRHA dimensions and weight. FRHA environmental specifications. FRHA LEDs FRIE functional specification FRIE interfaces. FRIE ALD support FRIE electrical specifications. FRIE power consumption, FRIE installation ane mecharical specifications FRIE dimensions and weight. FRIE environmental specifications FRIE LEDs. FXCB functional specication FXCB interfaces. FXCB ALD support FXCB electrical specifications. FXCB power consumption. FXCB installation and mechanical specifications FXCB dimensions and weight. FXCB environmental specifications. FXCB LEDs. . FXDB functional specification, FXDB interfaces. FXDB ALD support FXDB electrical specifications. FXDB power consumption, FXDB installation and mechanical specifications... FXDB dimensions and weight. FXDB environmental specifications FXDB LEDs. FXEB functional speciation. FXEB interfaces, FXEB ALD support FXEB electrical specifications. FXEB power consumption FXEB installation and mechanical specifications. FXEB dimensions and weight FXEB environmental specifications. FXEB LEDs. FXFC functional specification. DN0951745 BBEBR 68 68 70 70 70 70 1 nm 73 73 74 75 TS, 6 76 on TB 76 wT 79 80 at 81 at at 82 Bees 86 a7 a7 87 87 90Flexi Multiradio BTS RF Module and Remote Radio Head Description 10 Table 119 Table 120 Table 121 Table 122 Table 123 Table 124 Table 125 Table 126 Table 127 Table 128 Table 129 Table 130 Table 131 Table 132 Table 133 Table 134 Table 135 Table 136 Table 137 Table 138 Table 139 Table 140 Table 141 Table 142 Table 143 Table 144 Table 145 Table 146 Table 147 Table 148 Table 149 Table 150 Table 151 Table 152 Table 153 Table 154 Table 155 Table 156 Table 157 Table 158 FXFC interfaces, FXFC ALD support. FXFC electrical specifications. FXFC power consumption FXFC installation and mechanical specifications FXFC dimensions and weight FXFC environmental specifications. FXFC LEDs. FX4B functional specification. FXJB interfaces, FXJB ALD support. FX4B electrical specifications. FXJB power consumption FX4B installation and mechanical specifications. FXJB dimensions and weight. FXJB environmental specifications FXJB LEDs FRGT functional specification FRGT outout power in RU4O. FRGT interfaces. FRGT ALD support FRGT electrical specifications. FRGT power consumption. FRGT installation and mechanical specifications. FRGT dimensions and weight. FRGT environmental specifications. FRGT LEDs. FRGS functional specification FRGS output power in RUAO. FRGS interfaces. FRGS ALD support. FRGS electrical specifications FRGS power consumption FRGS installation and mechanical specifications FRGS dimensions and weight. FRGS environmental specifications. FRGS LEDs FRPA functional specification. FRPA interfaces FRPA ALD support. DNO951745, 20 91 92 92 93 93 93 93 96 96 7 98 98 99 99 100 100 102 102 103 103 104 105 105 105 106 106 108 108 109 108 110 "1 "1 an 112 112 114 14 115 Issue: 08Flexi Multiradio BTS RF Module and Remote Radio Head Description Issue: 08 Table 159 Table 160 Table 161 Table 162 Table 163, Table 164 Table 165 Table 166 Table 167 Table 168 Table 169 Table 170 Table 171 Table 172 Table 173 Table 174 Table 175 Table 176 Table 177 Table 178 Table 179 Table 180 Table 181 Table 182 Table 183, Table 184 Table 185 Table 186 Table 187 Table 188 Table 189 Table 190 Table 191 Table 192 Table 193, Table 194 Table 195 Table 196 Table 197 Table 198 FRPA electrical specifications. FRPA power consumption FRPA installation and mechanical specifications FRPA dimensions and weight. FRPA environmental specifications. FRPA LEDs. FRPB functional specification FRPB interfaces. FRPB ALD support FRPB electrical specifications. FRPB power consumption FRPB installation and mechanical specifications... FRPB dimensions and weight FRPB environmental specifications FRPB LEDs. FRHC functional specification FRHC interfaces. FRHC ALD support. FRHC electrical specifications, FRHC power consumption, FRHC installation and mechanical specifications, FRHC dimensions and weight. FRHC environmental specifications FRHC LEDs. FRHF functional specification FRHF interfaces. FRHF ALD support FRHF electrical specifications. FRHF power consumption FRHF installation and mechanical specifications... FRHF dimensions and weight. FRHF environmental specifications FRHF LEDs. oe FRMC functional specification FRMC interfaces. FRMC ALD support. FRMC electrical specifications FRMC power consumption. FRMC installation and mechanical specifications. FRMC dimensions and weight DN0951745 118 118 116 116 117 17 119 119 120 121 121 121 121 122 122 124 124 125 1268 126 128 126 127 127 120 128 130 131 131 131 131 132 132 134 134 135 136 136 136 136 "1Flexi Multiradio BTS RF Module and Remote Radio Head Description 12 Table 199 Table 200 Table 201 Table 202 Table 203 Table 204 Table 205 Table 206 Table 207 Table 208 Table 209 Table 210 Table 211 Table 212 Table 213 Table 214 Table 215 Table 216 Table 217 Table 218 Table 219 Table 220 Table 221 Table 222 Table 223 Table 224 Table 225 Table 226 Table 227 Table 228 Table 229 Table 230 Table 231 Table 232 Table 233 Table 234 Table 235 Table 236 Table 237 Table 238 FRMC environmental specifications. FRMC LEDs. FXED functional specification FXED interfaces. FXED ALD support FXED electrical specifications. FXED power consumption. FXED installation and mechanical specifications, FXED dimensions and weight. FXED environmental specifications. FXED LEDs. FHCA functional specification, FHCA interfaces. FHCA ALD support FHCA electrical specifications. FHCA power consumption FHCA installation and mechanical specifications. FHCA dimensions and weight. FHCA environmental specifications FHCA LEDs. FRLB functional specification FRLB interfaces. FRLB ALD support. FRLB electrical specifications, FRLB power consumption FRLB installation and mechanical specifications. FRLB dimensions and weight. FRLB environmental specifications FRLB LEDs. FHDA functional specification, FHDA interfaces. FHDA ALD support FHDA electrical specifications. FHDA power consumation. FHDA instalation and mechanical specifications. FHDA dimensions and weight. FHDA environmental specifications FHDA LEDs. FHEA functional specification FHEA interfaces. DNO951745, 137 137 138 130 140 141 141 142 142 142 143 145 148 146 147 147 147 148 148 148 150 150 151 152 152 152 153 153 153 155 156 156 157 157 187 158 158 158 160 161 Issue: 08Flexi Multiradio BTS RF Module and Remote Radio Head Description Issue: 08 Table 239 Table 240 Table 241 Table 242 Table 243 Table 244 Table 245 Table 246 Table 247 Table 248 Table 249 Table 250 Table 251 Table 252 Table 253, Table 254 Table 255 Table 256 Table 257 Table 258 Table 259 Table 260 Table 261 Table 262 Table 263, Table 264 Table 265 Table 266 Table 267 Table 268 Table 269 Table 270 Table 271 Table 272 Table 273 Table 274 Table 275 Table 276 Table 277 Table 278 FHEA ALD support FHEA electrical specifications. FHEA power consumption FHEA installation and mechanical specifications. FHEA dimensions and weight. FHEA environmental specifications. FHEA LEDs. FRGQ functional specification FRGQ interfaces. FRGQ ALD support. FRGQ electrical specifications FRGQ power consumption. FRG installation and mechanical specifications. FRGQ dimensions and weight. FRGQ environmental specifications, FRGQ_LEDs. FRHB functional specification, FRHB interfaces. FRHB ALD support. FRHB electrical specifications. FRHB power consumption FRHB installation and mechanical specifications. FRHB dimensions and weight. FRHB environmental specifications. FRHB LEDs FRMB functional specification. FRMB interfaces. FRMB ALD support FRMB electrical specifications. FRMB power consUMpLION..nnnnnnnnn FRMB installation and mechanical specifications. FRMB dimensions and weight. FRMB environmental specifications FRMB LEDs... oe FHEB functional specification FHEB interfaces. FHEB ALD support FHEB electrical specifications. FHEB power consumption FHEB installation and mechanical specifications DN0951745 161 162 162 162 163 163, 163 165 166 166 167 167 167 168 168 168 170 1m AMA 172 172 172 173 173 173 175 ATE 176 77 77 17 178 178 178 180 181 181 182 182 183 13Flexi Multiradio BTS RF Module and Remote Radio Head Description 14 Table 279 Table 280 Table 281 Table 282 Table 283 Table 284 Table 285 Table 286 Table 287 Table 288 Table 289 Table 290 Table 291 Table 292 Table 203 Table 294 Table 295 Table 26 Table 297 Table 298 Table 299 Table 300 Table 301 Table 302 Table 303 Table 304 Table 305 Table 306 Table 307 Table 308 Table 309 Table 310 Table 311 Table 312 Table 313 Table 314 Table 315 Table 316 Table 317 Table 318 FHEB dimensions and weight. FHEB environmental specifications. FHEB LEDs. FHEF functional specification. FHEF interfaces, FHEF ALD support. FHEF electrical specifications. FHEF power consumption. FHEF installation and mechanical specifications. FHEF dimensions and weight FHEF environmental specifications. FHEF LEDs, FHDB functional specification FHDB interfaces. FHDB ALD support FHDB electrical specifications. FHDB power consumption. FHDB installation and mechanical specifications. FHDB dimensions and weight. FHDB environmental specifications FHDB LEDs. FRGY functional specification. FRGY interfaces. FRGY ALD support. FRGY electrical specifications FRGY power consumption FRGY installation and mechanical specifications. FRGY dimensions and weight. FRGY environmental specifications. FRGY LEDs. FRIG functional specification. FRIG interfaces. FRIG ALD support. FRIG electrical specifications. FRIG power consumption. FRIG installation and mechanical specifications. FRIG dimensions and weight. FRIG environmental specifications. FRIG LEDs FRHD functional specification DNO951745, 183 183 184 186 187 187 188 188 188 189 189 189 191 192 192 193 193 193 194 194 194 196 197 197 198 198 198 199 199 199 201 201 202 203 204 204 204 205 205 207 Issue: 08Flexi Multiradio BTS RF Module and Remote Radio Head Description Issue: 08 Table 319 Table 320, Table 321 Table 322 Table 323, Table 324 Table 325 Table 326 Table 327 Table 328 Table 329 Table 320 Table 331 Table 332 Table 333, Table 334 Table 335 Table 336 Table 337 Table 338 Table 339 Table 340 Table 341 Table 342 Table 343, Table 344 Table 345, FRHD interfaces. FRHD ALD support. FRHD electrical specifications. FRHD power consumption FRHD installation and mechanical specifications, FRHD dimensions and weight. FRHE environmental specifications. FRHD LEDs. FRHE funetional specification, FRHE interfaces... FRHE ALD support. FRHE electrical specifications. FRHE power consumption FRHE installation and mechanical specifications. FRHE dimensions and weight. FRHE environmental specifications, FRHE LEDs, FHEB functional specification. FHFB interfaces. FHFB ALD support FHFS electrical specifications. FHF power consumption, FHFB installation and mechanical specifications, FHFB dimensions and weight. FHFB environmental specifications. FHFB LEDs, 207 208 209 210 210 210 an 211 213 213 214 215 216 216 216 217 217 219 220 220 221 222 222 222 223 223 Typical reference sensitivity degradation with different Antenna line PIM performance. DN0951745 227 15‘Summary of changes Flexi Multiradio BTS RF Module and Remote Radio Head Description 16 Summary of changes Changes between document issues are cumulative. Therefore, the latest document issue contains all changes made to previous issues Changes between issues 07 (2014-11-21) and 08 (2014-11-27) Information on the following module has been added: FXJB, Changes between issues 06 (2014-10-16) and 07 (2014-11-21) ‘The format of the docuemnt has been changed. Information on the following modules has been added: FXED, FHDA, FHEF, FFE. Information on the FXCA has been updated. Changes between issues 05 (2014-05-30) and 06 (2014-10-16) RF Module frequency range and bandwidth + Information on FXCA, FXEA and FRGS has been updated. Overview of Flexi Multiradio BTS RRH- + Table 4: RRH naming convention has been updated RH frequency range and bandwidth + _ Information on FRGY has been updated. RF Module power requirements and output power + Information on DC cable requirements for 60 W RF Modules and DC cable requirements for 6TX 40W RF Modules has been updated. RRH Module power requirements + Information on FRGY in Table 16: RRH power consumption has been updated. RF Module and RRH Module dimensions and weight + Table 18: RRH dimensions and weights has been updated, DN0951748 Issue: 08Flexi Multiradio BTS RF Module and Remote Radio RSS-310 compliance Head Description 1 RSS-310 compliance This equipment complies with RSS-310 of Industry Canada. Operation is subject to the condition that this device does not cause harmful interference, Issue: 08 DN0951745 7EU RoHS staternent Flexi Multiradio BTS RF Module and Remote Radio Head Description 2 EU RoHS statement This equipment complies with the European Union RoHS Directive 2011/65/EU on the restriction of the use of certain hazardous substances in electrical and electronic equipment. The directive applies to the use of lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls (PBB), and polybrominated diphenyl ethers (PBDE) in electrical and electronic equipment. 18 DNO951745, Issue: 08Flexi Multiradio BTS RF Module and Remote Radio Head Description (CE marking Issue: 08 3 CE marking Declaration of Conformity with Regard to the EU Directive 1999/5/EC (R&TTE Directive) Hereby, NSN declares that this equipment is in compliance with the essential requirements and other relevant provisions of Directive: 1899/S/EC. TEST Figure 1 __ List of countries respecting EU Directive 1990/5/EC C€@ R&TTE Directive 1995/5/EC aT v FR v w v u v BE v DE v uv v RO v 8G v cB v w v sk v cy v GR v Mt v si v oz v HU v NL. v ES v DK v 1s v No v SE v EE v © v PL v cH v Fl v 7 v Pr v TR v This declaration is only valid for configurations (combinations of software, firmware, and hardware) provided and/or supported by NSN. DN0951745 19FCC Part 18 compliance Flexi Multiradio BTS RF Module and Remote Radio Head Description 20 FCC Part 15 compliance This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference, in a commercial environment, This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manuals, might cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment DNO951745, Issue: 08Flexi Multiradio BTS RF Module and Remote Radio Head Description Flexi RF Module 3TX 800 (FRMA) 5 Flexi RF Module 3TX 800 (FRMA) FRIMA technical specifications. Functional description Table 1 FRMA functional specification Fropeny Valve Output power 3600 vA yes 2 Outaoorhetlaon 6 SW supported technoloay FOOTE Tr eaueney ange 751-621 ME ai Fequerey range aaa SGI Ne OL nstataneous sarah Zouz UL starianeous bandh Boe OL terbanawith soure OL terbanath a Interfaces Figure 2 FRMA interfaces ANT6 ANTS ANT4 ANT3 ANT2 ANTI TXIRX RX TXIRK RX TXIRK RX RXO 3 7X02 RXO1 S + ‘= g + =: * ° ° © © K [a = | Rerum z F 3 © Fe ae J OCIN Ground oprs| opts OPT 2 Table 2 FRMA interfaces Tnlorace [Label onthe HW [Number of ]Eonnestor ype Adaionel nfo Interfaces Pover comet [DON 7 in mulbeam 5? ro ant G 7H connertor Issue: 08 DNO951745, 2Flexi RF Module 3TX 800 (FRMA) Flexi Multiradio BTS RF Module and Remote Radio Head Description Table 2 FRMA interfaces (Cont) Interface Labelon the HW |Number of [Connector type Additional into Interfaces RF output RO) 3 oma connector Optical interface [OPT 3 SFP 3 Gbps Antenna Line Devices (ALDs) support Table 3 FRMAALD support ‘ALD support via antenna ports Value AISG. [2.0 Main only Legacy Siemens equipment No ‘GWA (for RoR-AISG installations) No Voltage [28 V Main only Power per por 30W Functional block diagram Figure 3 FRMA funetional block diagram RF Modo Dats ar PROB, KER, RET aon Pre Oteal Sap ota | coat FxDA, Fc, SHE! DNO951745, Issue: 08Flexi Multiradio BTS RF Module and Remote Radio Head Description Flexi RF Module 3TX 800 (FRMA) Issue: 08 Electrical specifications Table4 FRMA electrical specifications Property Value ‘Nominal supply votiage ~480V DC ‘Nominal input voltage range -405V DC to -870V OC Extended input voltage range -36.0V DC to -405V0C -87.0V DC to-60.0 VOC Power consumption Table5 — FRMA power consumption ‘Number of TS. IRF output power per Tx] Estimated power consumption [W] at 48 ‘VDC input at 23°C. Non-committed ‘estimated values depend on the final product HW and SW optimization with #/- 10% margit 30% RF Load 700% RF Load 3 Gy 668 943 0 510 673 20 374 380 Table 6 FMA installation and mechani Installation and mechanical specifications ical specifications Property Value Installation options + stack/poleiwall installation + directly on the wal installation IP rating IPSS. Related optional items + Flexi Pole Mounting Kit (FPKAIC) + Pole Mounting Kit (VMMPB) Dimensions and weight Table7 — FRMA dimensions and weight Property value Dimensions orientation Height 133 mm 3U (62in) Depth Without front covers: 422 mm (166 in.) With front covers: 860. mm (22.11n.) DN0951745 23Flexi RF Module 3TX 800 (FRMA) Flexi Multiradio BTS RF Module and Remote Radio Head Description 24 Table 7 FRMA dimensions and weight (Cont) Property value Dimensions orientation wet /without front covers: 447 mm (178in.) With front covers: 482 mm (19.4in) Weight [25 kg (68.1 Ibs) Environmental specifications Table @ _ FRGS environmental specifications Property [Value Maximum operational outdoor temperature (at |+55°C (131°F) constant high ambient temperature maximum ‘output power might be limited) cold start) Minimum operational temperature (including _|-35°C (SF) LEDs Table9 FRMALEDs Description [Alarm Red, stable Critial alarm affecting the ihole RF module or all antenna carriers Fault Red, blinking ‘Operation degraded Major alarm affecting the ‘hole RF Module Major alarm affecting the whole RF Module Major(Critical alarm affecting a module ‘subcomponent or antenna carrier Majorieritieal alarm Yellow, stable Until software download begins ‘The carriers are blocked trom BTS: ‘There Is no connection to any System Module No alarm Yellow, biinking Sofware download in progress Configuration in progress: RF resources are being ‘setup, but not yet activated No alarm Green, stable Sofware configuration Is complete or supervisory: No alarm DN0951748 Issue: 08Flexi Multiradio BTS RF Module and Remote Radio Flexi RF Module 3TX 800 (FRMA) Head Description Issue: 08 Table9 FRMALEDs (Cont.) LED color Description [Alarm RF resources activated and transmission is possible + Working normaly, no alarm on the RF Module Green, Blinking Sofware downloading and [No alarm updating ‘Stable Red forless than [Switched ON, bulthenext [No alarm seconds and changes to ‘conditions are not reached yet Stable Yellow ‘Stable Redforless than S |The module isin the process [No alarm seconds of resetting Periodic Red and Green ‘Antenna line device No alan foulty/degraded Blinking Colers (Red, Yellow, [Module highlighting (Flexi BTS [No alarm and Green), each color stable} SM functionally that can help for 0.5 second Identifying faulty module) RF Module fan/7X status LED: [At least one fan is faulty or Red degraded RF Module fan/TX status LED: [All fans are working Grean RF Module fan/TX status LED: [RF transmission is ON Color set according to fan status, stable RF Module fan/7X status LED: [RF transmission Is OFF Color set according to fan status, blinking Warnings, cautions or notes related to the product WARNING! Risk of electric shock. Before turing RF power on, RF ports have to be terminated by nominal 500 load (for example, feeder with antenna). However, if these conditions are not met, the plastic caps that are delivered within the unused RF ports should remain in place. The plastic caps isolate RF power from the environment, and thus provide electric shock security in case RF power is accidentally on. The minimum startup voltage is 40.5 V DC. If the input voltage is below/beyond extended limits, unit might shut down. DN0951745 28Flexi RF Module 3TX 800 (FRMD) Flexi Multiradio BTS RF Module and Remote Radio Head Description 26 6 Flexi RF Module 3TX 800 (FRMD) FRMD technical specifications. Functional description Table 10 FRMD functional specification Property Value ‘Output power 3x60. MIMO yes. 27x ‘Outdoor instalation yes ‘SW supported technology FODLTE Tr trequency range 731 -806 Mz RX frequency range 832-847 MH DL instantaneous bandwidth 15 MHz UL instantaneous bangwidtn TS MHZ DL fiter bandh 1S Me UL fiter bandwath 15 MHZ Interfaces Figure 4 FRMD interfaces ANT6 ANTS ANT4 ANTS ANT2 ANT TXRX RX TXIRK RX TXIRX RX. DC IN. Ground Table 11 FRMD interfaces Interface Label on the HW [Number of ‘Connector type Additional info interfaces Power connector [DC IN’ 1 2-pin multibeam XL ‘Antenna ANT G x76 connector DNO951745, Issue: 08Flexi Multiradio BTS RF Module and Remote Radio Head Description Flexi RF Module 3TX 800 (FRMD) Issue: 08 Table 11 FRMD interfaces (Cont.) interface [Label on the HW [Number of [Connector type [Additional into interfaces RF output RO) 3 awa connector Opticalintertace [OPT 3 SFP 3 Gbps Antenna Line Devices (ALDs) support Table 12 FRMD ALD support ‘ALD support via antenna ports Value ASG 2.0 Main only Legacy Siemens equipment No ‘GWA (for nor-AISG installations) No Voage 24 V Main only Power per port 30W Functional block diagram Figure 5 FRMD functional block diagram RFMedule Duplo s+ FxDe, FXEB, RET ay Pre Cotes ote arom PEIN | Psu DNO951745, 27Flexi RF Module 3TX 800 (FRMD) Flexi Multiradio BTS RF Module and Remote Radio Head Description 28 Electrical specifications Table 13 FRMD electrical specifications Property [value ‘Nominal supply vortage ~48.0 VDC Norminal input voltage range 40.5 VC to-87.0V DC Extended input voltage range -36.0 VC to -40.5V DC. -87.0 VDC to-60.0V DC Power consumption Table 14 FRMD power consumption ‘Number of Ts: RF output power per [Estimated power consumption [W] at 48 x1] |VOC input at 23°C. Non-committed Jestimated values depend on the final product HW and SW optimization with +/- 10% margin. ‘50% RF Load 100% RF Load 3 60 eat 828 40 [486 aie 20 368 436 Installation and mechanical specifications Table 15 FRMD installation and mechanical specifications Property value Installation options + stack/poleiwall installation J+ lrectly on the wall instalation IP rating PSS Related optional items |. Flexi Pole Mounting Kit (FPKA/O) J+ Pole Mounting Kit (VMPB) Dimensions and weight Table 16 FRMD dimensions and weight Property [Value Dimensions orientation aight 133 mmi 3U (62 in) Lo Depth /without front covers: 422 mm a (188in.) ight With front covers: 860 mm Jeon (22.11n.) we DN0951748 Issue: 08Flexi Multiradio BTS RF Module and Remote Radio Head Description Flexi RF Module 3TX 800 (FRMD) Issue: 08 Table 16 FRMD dimensions and weight (Cont) Property Value Dimensions orientation Wieth ‘Without front covers: 487 mm (178 in) With front covers: 482 mm (19.4 in.) Weight 25 kg (65.1 Ibs) Environmental specifications Table 17 FRMD environmental specifcati ions Property Value ‘Maximum operational outdoor temperature (at constant high ambient temperature maximum Output power might be limited) 355°C (13°F) antenna carriers ‘Minimum operational temperature (including |-35°C (31°F) cold start) LEDs Table 18 FRMD LEDs LED color [Description [Alarm Red, stable Crtical alarm affecting the | Fauit ‘whole RF module or all + Major alarm + Major alarm carrier Red, blinking ‘Operation degraded affecting the whole RF Medule affecting the ‘whole RF Module + MajoriCrtical alarm affecting a module subcomponent or antenna Majorferiical alarm Yellow, stable + Untiisonware download [No alarm begins +The carriers are blocked from BTS + There is no connection to any System Module Yellow, blinking + Software download in [No alarm progress + Configuration in progress: RF resources are being setup, but not yet activated Green, stable + Software configuration is [No alarm complete or supervisory DN0951745 29Flexi RF Module 3TX 800 (FRMD) Flexi Multiradio BTS RF Module and Remote Radio Head Description Table 18 FRMD LEDs (Cont.) and Green), each color stable for 0.5 second ‘SM functionality that can help Identifying faulty module) LED color Description [Alarm RF resources activated ‘and transmission is possible + Working normally, ne alarm on the RF Module ‘Green, biinking ‘Software downloading and [No alarm updating Stable Red forlessthan5 [Switched ON, butthe next [No alarm ‘seconds and changes to conditions are not reached yet ‘Stable Yellow ‘Stable Red forless than5 | The module isin the process [No alarm seconds of resetting Periodle Red and Green [Antenna tine device No alarm aulty/degreded Blinking Colors (Red, Yellow, | Module highlighting (Flexi BTS [No alarm RF Module fan/TX status LED: [At least one fan is faulty or Red degraded RF Module fan/TX status LED: [Al fans are working Green RF Module fan/TX status LED: Color set according te fan status, stable RF transmission is ON RF Module fan/TX status LED: Color set according te fan status, blinking RF tranemission is OFF Warnings, cautions or notes related to the product ZX WARNING! Risk of electric shock. Before turing RF power on, RF ports have to be terminated by nominal 500 load (for example, feeder with antenna). However, if these conditions are not met, the plastic caps that are delivered within the unused RF ports should remain in place. The plastic caps isolate RF power from the environment, and thus provide electric shock security in case RF power is accidentally on, @ The minimum startup voltage is 40.5 V DC. If the input voltage is below/beyond extended limits, unit might shut down, 30 DN0951748 Issue: 08Flexi Multiradio BTS RF Module and Remote Radio Head Description Flexi RFM 3-pipe 850 180W (FXCA) Flexi RFM 3-pipe 850 180W (FXCA) FXCA technical specifications. Functional description Table 19 FXCA functional specification Property Value Output power 3x60. MMe no Outdosr instalation 785 ‘SW supported technologies (E54, WEDMA, FOD-LTE Tx frequency range 65-894 Nz 30x version: 252-894 MHz RX frequency range 826-849 MHz 30x version: 807-849 M2, DL Instantaneous bandwidth 16 MHz, 18 MHz In GSM dedicated mode UL Instantaneous bandwith 15 MHz, 18 MHz In GSM dedicated mode DL fiter Bandwidth TS MHz, 18 MHz in GSM dadicated mode UL fiter bandwidth 16 MHz, 18 MHz In GSM dedicated mode Interfaces Figure 6 FXCA interfaces ants. RX Roe THIRK Anta Pwrin Rx RX Ros TORK RET (FXFB only) ANTS ANT2— ANT RX Rxo2 TARK Rx03 SL vo ora ration! | olan orrt oer wiR00! | Glan Le oa ‘status. fac DN0951745 auFlexi RFM 3-pipe 850 180W (FXCA) Flexi Multiradio BTS RF Module and Remote Radio Head Description 32 Table 20 FXCA interfaces Tnterface Labelon the HW [Number of Connector type [Additional info Interfaces Power connector [DC IN 7 2-pin multibeam xt Antenna ANT fe m6 connector RF output RxO 3 oma connector Exiemal Alam [EAC 7 Rus Connection ‘Optical interface [OPT SFP 3 Gbps Antenna Line Devices (ALDs) support Table 21 FXCA ALD support ‘ALD support via antenna ports value aise [2.0 Main only Legacy Siemens equipment Yes ‘CWA (for non-AISG installations) Yes Voltage Power per port Main = 12V/1A or 24V/30W DWv = 12V1A, DN0951748 Issue: 08Flexi Multiradio BTS RF Module and Remote Radio Head Description Flexi RFM 3-pipe 850 180W (FXCA) Issue: 08 Functional block diagram Figure 7 FXCA functional block diagram Grr Breer bof ofp y= xen Herc 2 a Frm, Fx, Orersty_—Jeycte a: FT} “ Optica > RF ota conta FRGP.FRIE. optea i FDA Pxca, PE PXEA FRG cn = Fan assembly Electrical specifications Table 22 FXCA electrical specifications Property value ‘Nominal supply vottage ~48.0V DC Nominal input voltage range -405V DC to -670V0C Extended input voltage range “36.0 DC to -40.5V DC -STOV DC to-60.0V00 Power consumption Table 23. FXCA power consumption ‘Number of TS. RF output power per | Estimated power consumption [W] at 48) x (W) ‘VDC input at 23°C. Non-committed ‘estimated values depend on the final product HW and SW optimization with +!- 10% margin. 50% RF Load 100% RF Load 3 60 545 794 40 468 eae 20 363 484 DN0951745 33Flexi RFM 3-pipe 850 180W (FXCA) Flexi Multiradio BTS RF Module and Remote Radio Head Description Installation and mechanical specifications Table 24 FXCA installation and mechanical specifications Property Value Installation options + stack/poleiwall installation J+ iectly on the wall installation IP rating P8E Related optional items + Flexi Pole Mounting Kit (FPKA/O) J+ Pole Mounting Kit (VMPB) Dimensions and weight Table 25 FXCA dimensions and weight Property [Value Dimensions orientation Height 433 mm/3U (62 In) Depth without front covers: 422 mm — (188in.) - ‘ht With front covers: 860 mm Aci (22.11n.) Pr Wet without tront covers: 447 mm (178in.) with front covers: 492 mm, (134 in.) Weight 25 kg (55.1 Ibs) Environmental specifications Table 26 FXCA environmental specifications Property [value Maximum operational outdoor temperature (at | +85°C (131°F) constant high ambient temperature maximum ‘output power might be limited) Minimum operational temperature (including _|-35°C (31°F) cold start) LEDs Table 27 FXCALEDs LED color Description [Alarm Rad, stable Critical alarm affecting tne | Fault ihole RF module or all antenna carriers Rad, blinking ‘Operation degraded Majorieritcal alarm 34 DN0951748 Issue: 08Flexi Multiradio BTS RF Module and Remote Radio Head Description pe 850 180W (FXCA) Table 27 FXCALEDs (Cont) LED color Description [Alarm + Major alarm affecting the ‘whole RF Module. + Major alarm affecting the ‘whole RF Module. + Major/Critical alarm affecting 2 module subcomponent or antenna cerrier Yellow, stable + Untiisofware download [No alarm begins +The carriers are blocked from BTS + There is no connection to any System Module Yellow, biking + Software download in [No alarm progress + Configuration in progress: RF resources are being setup, but rot yet activated Green, stable + Software configuration is [No alarm complete or supervisory RF resources activated and transmission Is. possible + Working normally, no alarm on the RF Module ‘Green, Blinking Sofware downloading and [No alarm updating ‘Stable Red forless than | Switched ON, butthe next _ [No alarm seconds and changes to ‘conditions are not reached yet Stable Yellow ‘Stable Red forless than |The moduleisinthe process [No alarm seconds of resetting Periodic Red and Green ‘Antenna line device No alarm faulty/degraded Blinking Colors (Red, Yellow, _ | Module highlighting (Flexi BTS [No alarm and Green), each color stable | SM functionally that can help for 0.5 second identifying faulty module) RF Module fan/7X status LED: [At least one fan is faulty or Red degraded RF Module fan/TX status LED: [All fans are working Grean RF Module fan/7X status LED: [RF transmission is ON. Color set according to fan status, stable RF Module fan/7X status LED. [RF transmission Is OFF Color set according to fan status, blinking Issue: 08 DN0951745 6Flexi RFM 3-pipe 850 180W (FXCA) Flexi Multiradio BTS RF Module and Remote Radio Head Description Warnings, cautions or notes related to the product ZX __ WARNING! Risk of electric shock. Before turing RF power on, RF ports have to be terminated by nominal 500 load (for example, feeder with antenna). However, if these conditions are not met, the plastic caps that are delivered within the unused RF ports should remain in place. The plastic caps isolate RF power from the environment, and thus provide electric shock security in case RF power is accidentally on The minimum startup voltage is 40.5 V DC. If the input voltage is below/beyond extended limits, unit might shut down, 36 DNO951745, Issue: 08Flexi Multiradio BTS RF Module and Remote Radio Head Description Flexi RF Module 3TX 900 (FXDA) Issue: 08 8 Flexi RF Module 3TX 900 (FXDA) FXDA technical specifications. Functional description Table 28 FXDA functional specification Property Value Output power 3x60. MMe yes, 27% Outdosr instalation ye5 ‘SW supported technologies (GDM, WEDMA, FOD-LTE TH trequency range 325-560 Nz RX frequency range ‘260-915 MHz DL Instantaneous banawiath 20 MHz UL instantaneous bandwidth 20 MHz DL fiter bandwidth 20 MHz UL fiter Bandwidth 20 MHz Interfaces Figure 8 FXDA interfaces ANT6 ANTS ANT4— ANTS. ANT. ANT pwrin BX pxos THRX RK Rxoa TORK RX Rao 1 TRIRK gy wo onl AN ration} le ore oor sea ouccue ee 7A Table 20 FKDA nterases i SCS | S| eg 2 DNO951745, 37Flexi RF Module 3TX 900 (FXDA) Flexi Multiradio BTS RF Module and Remote Radio Head Description 38 Table 29 FXDA interfaces (Cont) Interface Label on the HW [Number of. ‘Connector type Additional info interfaces RF output RxO. 3 Ma connector Extermal Alarm [EAC 1 RIS Connection ‘Opticalintertace_[OPT 3 SFP 3 Gops. Antenna Line Devices (ALDs) support Table 30 FXDAALD support ‘ALD support via antenna ports Value ISG. [2.0 Main onty Legacy Siemens equipment Yes ‘EWA (for non AISG installations) Yes Voltage Main = 12V/1A or 24V/30W Power perpen Div = tava, Functional block diagram Figure 9 FXDA functional block diagram »| fein fence poeren ger) fom ke Cree] | amar onae',| Duplo tr + Divert RX. bof red of rx ia IE RF 5) con el in FRGP, FRE, opical BERRA) x bet Rexciversiy Loft oo oc = DNO951745, Fen asembly Issue: 08Flexi Multiradio BTS RF Module and Remote Radio Head Description Flexi RF Module 3TX 900 (FXDA) Issue: 08 Electrical specifications Table 31 FXDA electrical specifications Property Value ‘Nominal supply votiage ~480V DC ‘Nominal input voltage range -405V DC to -870V OC Extended input voltage range -36.0V DC to -405V0C -87.0V DC to-60.0 VOC Power consumption Table 33 Table 32 FXDA power consumption ‘Number of TS. RF output power per | Estimated power consumption [W] at 48) Tx] ‘VDC input at 23°C. Non-committed ‘estimated values depend on the final product HW and SW optimization with #/- 10% margit 50% RF Load 100% RF Load 3 0 700 932 40 533 672 20 447 523, Installation and mechanical specifications FXDA installation and mechanical specifications Property Value Installation options + stack/poleiwall installation + directly on the wal installation IP rating IPSS. Related optional items + Flexi Pole Mounting Kit (FPKAIC) + Pole Mounting Kit (VMMPB) Dimensions and weight Table 34 FXDA dimensions and weight Property value Dimensions orientation Height 133 mm 3U (62in) Depth Without front covers: 422 mm (166 in.) With front covers: 860. mm (22.11n.) DN0951745 39Flexi RF Module 3TX 900 (FXDA) Flexi Multiradio BTS RF Module and Remote Radio Head Description 40 Table 34 FXDA dimensions and weight (Cont.) Property value Dimensions orientation wet /without front covers: 447 mm (178in.) With front covers: 482 mm (19.4in) Weight [25 kg (68.1 Ibs) Environmental specifications Table 35 FXDA environmental specifications Property [Value Maximum operational outdoor temperature (at |+55°C (131°F) constant high ambient temperature maximum ‘output power might be limited) cold start) Minimum operational temperature (including _|-35°C (SF) LEDs Table 36 FXDALEDs Description [Alarm Red, stable Critial alarm affecting the ihole RF module or all antenna carriers Fault Red, blinking ‘Operation degraded Major alarm affecting the ‘hole RF Module Major alarm affecting the whole RF Module Major(Critical alarm affecting a module ‘subcomponent or antenna carrier Majorieritieal alarm Yellow, stable Until software download begins ‘The carriers are blocked trom BTS: ‘There Is no connection to any System Module No alarm Yellow, biinking Sofware download in progress Configuration in progress: RF resources are being ‘setup, but not yet activated No alarm Green, stable Sofware configuration Is complete or supervisory: No alarm DN0951748 Issue: 08Flexi Multiradio BTS RF Module and Remote Radio Flexi RF Module 3TX 900 (FXDA) Head Description Issue: 08 Table 36 FKDALEDs (Cont) LED color Description [Alarm RF resources activated and transmission is possible + Working normaly, no alarm on the RF Module Green, Blinking Sofware downloading and [No alarm updating ‘Stable Red forless than [Switched ON, bulthenext [No alarm seconds and changes to ‘conditions are not reached yet Stable Yellow ‘Stable Redforless than S |The module isin the process [No alarm seconds of resetting Periodic Red and Green ‘Antenna line device No alan foulty/degraded Blinking Colers (Red, Yellow, [Module highlighting (Flexi BTS [No alarm and Green), each color stable} SM functionally that can help for 0.5 second Identifying faulty module) RF Module fan/7X status LED: [At least one fan is faulty or Red degraded RF Module fan/TX status LED: [All fans are working Grean RF Module fan/TX status LED: [RF transmission is ON Color set according to fan status, stable RF Module fan/7X status LED: [RF transmission Is OFF Color set according to fan status, blinking Warnings, cautions or notes related to the product WARNING! Risk of electric shock. Before turing RF power on, RF ports have to be terminated by nominal 500 load (for example, feeder with antenna). However, if these conditions are not met, the plastic caps that are delivered within the unused RF ports should remain in place. The plastic caps isolate RF power from the environment, and thus provide electric shock security in case RF power is accidentally on. The minimum startup voltage is 40.5 V DC. If the input voltage is below/beyond extended limits, unit might shut down. DN0951745 44Flexi RF Module 3TX 900 (FXDJ) Flexi Multiradio BTS RF Module and Remote Radio Head Description 42 Flexi RF Module 3TX 900 (FXDJ) FXD4J technical specifications. Functional description Table 37 FXD4 functional specification Property [value ‘Output power 3x60 W MIMO 70 ‘Outdoor installation yes: ‘SW supported technologies GMS, WODMA\ ‘Tx frequency range 935-960 MHZ RX frequency range 90-915 MHz DL instantaneous banawiatn 12.5 MHz UL instantaneous bandwidtn 12.5 MHZ DL fiter bandwidth 125 MH UL fiter Bandwieth 12.5 MHz Interfaces Figure 10 FXDJ interfaces ANT6 ANTS ANTS ANTS aNT2 pwrin RX Ros TX RX Roa THIRK RK Ryo THIRK Leo oz | (\) rato | gdaina ors opts vane LED Module ons et fe Table 38 FXDJ interfaces Interface Label on the HW [Number of [Eonnector type [Additional info interfaces Power eonnestor [DCN 7 Zin mutizear xt fntenna ANT é 76 connector DNO951745, Issue: 0BFlexi Multiradio BTS RF Module and Remote Radio Head Description Flexi RF Module 3TX 900 (FXDJ) Issue: 08 Table 38 FXD4J interfaces (Cont.) Tnlerface Label on the HW [Number of [Connector type | Additional info interfaces RF output xO 3 coma connector ExiemalAlarm [EAC 1 RMS Connection ‘Optealinterface [OPT 3 SFP 3Gops Antenna Line Devices (ALDs) support Table 39 FXDJ ALD support ‘ALD support via antenna ports Value ASG 2.0 Main only Legacy Siemens equipment Yes CWA (for non-AISG insalations) Yee Vetage Main = 12V/1A or 24V720W Power per port Div = 12vit& Functional block diagram Figure 11 FXDJ functional block diagram Modo esos a+ Baer Firs 7 qT Es HT eoursccess coca | ae - ices” Ol cr Pate FxDa Exca OSES! BIeA Fe = xex-ol PSU. DN0951745 43Flexi RF Module 3TX 900 (FXDJ) Flexi Multiradio BTS RF Module and Remote Radio Head Description 44, Electrical specifications Table 40 FXD\ electrical specifications Property [value ‘Nominal supply vortage ~48.0 VDC Norminal input voltage range 40.5 VC to-87.0V DC Extended input voltage range -36.0 VC to -40.5V DC. -87.0 VDC to-60.0V DC Power consumption Table 41 FXDJ power consumption ‘Number of Ts: RF output power per [Estimated power consumption [W] at 48 x1] |VOC input at 23°C. Non-committed Jestimated values depend on the final product HW and SW optimization with +/- 10% margin. ‘50% RF Load 100% RF Load 3 60 700 $32 40 533, e72 20 aa7 523, Installation and mechanical specifications Table 42 FXDJ installation and mechanical specifications Property value Installation options + stack/poleiwall installation J+ lrectly on the wall instalation IP rating PSS Related optional items |. Flexi Pole Mounting Kit (FPKA/O) J+ Pole Mounting Kit (VMPB) Dimensions and weight Table 43 FXDJ dimensions and weight Property [Value Dimensions orientation aight 133 mmi 3U (62 in) Lo Depth [without front covers: 422 mm (188in.) |) oe With front covers: 860 mm Jeon (22.11n.) we DN0951748 Issue: 08Flexi Multiradio BTS RF Module and Remote Radio Head Description Flexi RF Module 3TX 900 (FXDJ) Issue: 08 Table 43. FXDJ dimensions and weight (Cont.) Property Value Dimensions orientation Wieth ‘Without front covers: 487 mm (178 in) With front covers: 482 mm (19.4 in.) Weight 25 kg (65.1 Ibs) Environmental specifications Table 44 FXDJ environmental specifications Property Value ‘Maximum operational outdoor temperature (at constant high ambient temperature maximum Output power might be limited) 355°C (13°F) antenna carriers ‘Minimum operational temperature (including |-35°C (31°F) cold start) LEDs Table 45 FXDJLEDs LED color [Description [Alarm Red, stable Crtical alarm affecting the | Fauit ‘whole RF module or all + Major alarm + Major alarm carrier Red, blinking ‘Operation degraded affecting the whole RF Medule affecting the ‘whole RF Module + MajoriCrtical alarm affecting a module subcomponent or antenna Majorferiical alarm Yellow, stable + Untiisonware download [No alarm begins +The carriers are blocked from BTS + There is no connection to any System Module Yellow, blinking + Software download in [No alarm progress + Configuration in progress: RF resources are being setup, but not yet activated Green, stable + Software configuration is [No alarm complete or supervisory DN0951745 45Flexi RF Module 3TX 900 (FXDJ) Flexi Multiradio BTS RF Module and Remote Radio Head Description Table 45 FXDJ LEDs (Cont.) and Green), each color stable for 0.5 second ‘SM functionality that can help Identifying faulty module) LED color Description [Alarm RF resources activated ‘and transmission is possible + Working normally, ne alarm on the RF Module ‘Green, biinking ‘Software downloading and [No alarm updating Stable Red forlessthan5 [Switched ON, butthe next [No alarm ‘seconds and changes to conditions are not reached yet ‘Stable Yellow ‘Stable Red forless than5 | The module isin the process [No alarm seconds of resetting Periodle Red and Green [Antenna tine device No alarm aulty/degreded Blinking Colors (Red, Yellow, | Module highlighting (Flexi BTS [No alarm RF Module fan/TX status LED: [At least one fan is faulty or Red degraded RF Module fan/TX status LED: [Al fans are working Green RF Module fan/TX status LED: Color set according te fan status, stable RF transmission is ON RF Module fan/TX status LED: Color set according te fan status, blinking RF tranemission is OFF Warnings, cautions or notes related to the product ZX WARNING! Risk of electric shock. Before turing RF power on, RF ports have to be terminated by nominal 500 load (for example, feeder with antenna). However, if these conditions are not met, the plastic caps that are delivered within the unused RF ports should remain in place. The plastic caps isolate RF power from the environment, and thus provide electric shock security in case RF power is accidentally on, @ The minimum startup voltage is 40.5 V DC. If the input voltage is below/beyond extended limits, unit might shut down, 46 DN0951748 Issue: 08