Drill-Pipe Performance Sheet

Drill-Pipe Configuration Note: Connection torsional strength is less than 80% pipe body torsional strength.
Nominal Pipe Body OD (in) 6.625
Nominal Pipe Body Wall Thickness (in) 0.522 Nominal Pipe Body Wall 34.02
Pipe Body Grade V-150 Pipe Body Specified Minimum Yield Strength 150,000 (psi)

Drill-Pipe Length Range2 Pipe Body Minimum Ultimate Tensile Strength (psi) 160,000

Tool Joint 6-5/8 FH Drill-Pipe Approximate Length (ft) 32.01

Tool Joint OD (in) 8.500 Upset IEU

Tool Joint ID (in) 4.250 Elevator OD (in) 3/32 Raised

Pin Tong (in) 11 Tool Joint Specified Minimum Yield Strength (psi) 120,000

Box Tong (in) 14

Based on: 90 % Inspection Class Pipe Body,

Landing String Rating (lbs) 1,004,700 tool joint at recommended make-up torque, elevator OD, no applied drilling torque.

Drill-Pipe Performance Drill-Pipe Length Range2

Performance of Drill-Pipe with Pipe Body at Best Estimates
90 % Inspection Class (without Coating) (with Coating)
Applied Make-up Applied Drilling Max Tension Drill-Pipe Adjusted Weight (lbs/ft) 44.25
Torque (ft-lbs) Torque (ft-lbs) (lbs)
1,339,600 Fluid Displacement (gal/ft) 0.676

56,100 0
1,274,300 Fluid Capacity (gal/ft) 1.198 1.190
56,100
1,339,600 Fluid Capacity (Bbls/ft) 0.02852 0.02833
54,200 0
1,278,700 Drift Size (in) 4.125
54,200 Note: Drill pipe assembly values are best estimates and may vary due to pipe body mill tolerance, internal plastic
coating, and other factors.
Note: Oil field barrel equals 42 US gallons.

Tool Joint Performance 6-5/8 FH ( 8.500 (in) X 4.250 (in) ) 120,000 (psi)

Applied Make-up
Torque
Tension at Shoulder
Separation
Tension at Connection
Yield Tool Joint Dimensions
(ft-lbs) (lbs) (lbs)
Bevel Diameter (in) 7.703
Recommended Make-up Torque 56,100 1,962,400 2,077,800
Minimum Recommended Make-up Torque 54,200 1,896,000 2,077,800 Balanced OD (in) 8.248
Minimum Tool Joint OD for API Not Applicable
Premium Class (in)
Note for TurboTorque connections: Turbo Make-up Torque is an acceptable increased make-up torque if additional torque is required for drilling.

Tool Joint Torsional Strength (ft-lbs) 108,400 Tool Joint Tensile Strength 2,077,800
(lbs)

Elevator Shoulder Information Elevator OD 3/32 Raised 8.688 (in)

Elevator OD Nominal Tool Joint Worn to Bevel Worn to Min TJ OD for

3/32 Raised OD Diameter API Premium Class
Box OD (in) 8.688 8.500 7.703 Not Applicable
Elevator Capacity (lbs) 2,251,500 1,972,800 856,100 0
Note: Elevator capacity based on assumed Elevator Bore, no wear factor, and contact stress of 110,100psi.
Assumed Elevator Bore (in) 7.031 Note: A raised elevator OD increases elevator capacity without affecting make-up torque.

Pipe Body Slip Crushing Capacity Pipe Body Configuration ( 6.625 (in) OD 0.522 (in) Wall V-150 )
Nominal 90 % Inspection Class API Premium Class

Slip Crushing Capacity (lbs) 1,120,700 1,004,700 889,500

Note: Slip manufacturer should provide Slip Length and Transverse Load Factor.
Assumed Slip Length (in) 16.5
Note: Slip crushing calculation from Spiri Reinhold, Why Does Drill Pipe Fail in the Slip
Transverse Load Factor (K) 2.6 Area, World Oil 1959.

Pipe Body Performance Pipe Body Configuration ( 6.625 (in) OD 0.522 (in) Wall V-150 )
Nominal 90 % Inspection Class API Premium Class

Pipe Tensile Strength (lbs)1,501,300 1,339,600 1,180,500

Pipe Torsional Strength (ft-lbs) 204,400 181,900 159,900
TJ/PipeBody Torsional Ratio 0.53 0.60 0.68
80% Pipe Torsional Strength (ft-lbs) 163,500 145,500 127,900
Burst (psi) 20,683 21,274 18,910 Note: Nominal Burst
calculated at 87.5% RBW
Collapse (psi) 20,057 16,682 13,197 per API.
Pipe OD 6.625
(in) 6.521 6.416
Wall Thickness 0.522
(in) 0.470 0.418
Nominal Pipe ID (in) 5.581 5.581 5.581
Cross Sectional Area of Pipe Body (sq in) 10.008 8.930 7.870
Cross Sectional Area of OD (sq in) 34.472 33.394 32.333
Cross Sectional Area of ID (sq in) 24.463 24.463 24.463
Section Modulus (cubic in) 14.170 12.611 11.087
Polar Section Modulus (cubic in) 28.340 25.223 22.174
Note: The technical information contained herein, including the product performance sheet and other attached documents, is for reference only and should not be construed as a recommendation. The user is fully
responsible for the accuracy and suitability of use of the technical information. NOV Grant Prideco cannot assume responsibility for the results obtained through the use of this material. No expressed or implied
warranty is intended. Drill pipe assembly properties are calculated based on uniform OD and wall thickness. No safety factor is applied. The information provided for various inspection classes and for various wear
conditions (remaining body wall) is for information only and does not represent or imply acceptable operating limits. It is the responsibility of the customer and the end user to determine the appropriate performance
ratings, acceptable use of the product, maintain safe operational practices, and to apply a prudent safety factor suitable for the application.
 Torque‐Tension Graph
Tool Joint: 6‐5/8 FH (8.500 X 4.250) SMYS = 120,000 psi
Pipe Body: 90% Inspection Class, 6.625 inch OD, 0.522 inch wall thickness, V‐150 Pipe Grade

2,500,000
Pipe Body in Combined Loading
Pipe Body Yield at 90%
Inspection Class

Tool Joint Applied Make‐up Torque

2,000,000
Tool Joint Yield
Tool Joint Shoulder Separation
Recommended MUT

1,500,000 Min Recommended MUT

Tenssion (lbs)

1,000,000

500,000

Drilling Torque (ft‐lbs)

 Operational Limits (Connection at Recommended MUT = 56,100 ft‐lbs)
Tool Joint: 6‐5/8 FH (8.500 X 4.250) SMYS = 120,000 psi
Pipe Body: 90% Inspection Class, 6.625 inch OD, 0.522 inch wall thickness, V‐150 Pipe Grade

1,600,000
Overload Zone
1,400,000

1,200,000

1,000,000
nsion (lbs)

800,000
Ten

600,000

400,000

200,000

Safe Operating Zone

0

Drilling Torque (ft‐lbs)

 Operational Limits (Connection at Min Recommended MUT = 54,200 ft‐lbs)
Tool Joint: 6‐5/8 FH (8.500 X 4.250) SMYS = 120,000 psi
Pipe Body: 90% Inspection Class, 6.625 inch OD, 0.522 inch wall thickness, V‐150 Pipe Grade

1,600,000
Overload Zone
1,400,000

1,200,000

1,000,000
nsion (lbs)

800,000
Ten

600,000

400,000

200,000

Safe Operating Zone

0

Drilling Torque (ft‐lbs)

Tool Joint 6-5/8 FH Tool Joint OD (in) 8.500 Tool Joint ID (in) 4.250 Tool Joint Specified Minimum 120,000
Yield Strength (psi)

Pipe Body 90 % Inspection Class Pipe Body OD (in) 6.625 Wall Thickness (in) 0.522 Pipe Body Grade V-150

Tension at Tension at Tension at Tension at Tension at Tension at

Shoulder Pipe Body Shoulder Connection
Pipe Body Connection Separation
Separation (lbs) Yield (lbs) Yield (lbs)
Yield (lbs) Yield (lbs) (lbs)

0 1,339,600 1,339,600 1,962,400 2,077,800 0 1,339,600 1,339,600 1,896,000 2,077,800

3,000 1,339,400 1,339,400 1,962,400 2,077,800 2,900 1,339,400 1,339,400 1,896,000 2,077,800

5,900 1,338,900 1,338,900 1,962,400 2,077,800 5,700 1,338,900 1,338,900 1,896,000 2,077,800

8,900 1,338,000 1,338,000 1,962,400 2,077,800 8,600 1,338,100 1,338,100 1,896,000 2,077,800

11,800 1,336,800 1,336,800 1,962,400 2,077,800 11,400 1,336,900 1,336,900 1,896,000 2,077,800

14,800 1,335,100 1,335,100 1,962,400 2,077,800 14,300 1,335,400 1,335,400 1,896,000 2,077,800

17,700 1,333,200 1,333,200 1,962,400 2,077,800 17,100 1,333,600 1,333,600 1,896,000 2,077,800

20,700 1,330,900 1,330,900 1,962,400 2,077,800 20,000 1,331,500 1,331,500 1,896,000 2,077,800

23,600 1,328,300 1,328,300 1,962,400 2,077,800 22,800 1,329,000 1,329,000 1,896,000 2,077,800

26,600 1,325,200 1,325,200 1,962,400 2,077,800 25,700 1,326,100 1,326,100 1,896,000 2,077,800

29,500 1,321,800 1,321,800 1,962,400 2,077,800 28,500 1,323,000 1,323,000 1,896,000 2,077,800

32,500 1,318,000 1,318,000 1,962,400 2,077,800 31,400 1,319,500 1,319,500 1,896,000 2,077,800

35,400 1,314,000 1,314,000 1,962,400 2,077,800 34,200 1,315,700 1,315,700 1,896,000 2,077,800

38,400 1,309,400 1,309,400 1,962,400 2,077,800 37,100 1,311,400 1,311,400 1,896,000 2,077,800

41,300 1,304,600 1,304,600 1,962,400 2,077,800 39,900 1,307,000 1,307,000 1,896,000 2,077,800

44,300 1,299,300 1,299,300 1,962,400 2,077,800 42,800 1,302,000 1,302,000 1,896,000 2,077,800

47,200 1,293,700 1,293,700 1,962,400 2,077,800 45,600 1,296,800 1,296,800 1,896,000 2,077,800

50,200 1,287,600 1,287,600 1,962,400 2,077,800 48,500 1,291,100 1,291,100 1,896,000 2,077,800

53,100 1,281,200 1,281,200 1,962,400 2,077,800 51,300 1,285,200 1,285,200 1,896,000 2,077,800

56,100 1,274,300 1,274,300 1,962,400 2,077,800 54,200 1,278,700 1,278,700 1,896,000 2,077,800

Operational drilling torque is limited by the Make-up Torque. Operational drilling torque is limited by the Make-up Torque.

Tension at Tension at Tension at

Pipe Body Shoulder Connection
Yield (lbs) Separation Yield (lbs)
(lbs)

Note: Drill-Pipe porperties are calculated based on uniform OD and wall thickness. No safety factor applied.
This performance sheet is for reference only.

Note: Recommended MUT should always be used when possible. If not possible, MUT should be as close
to Recommended MUT as possible.

For Turbo Torque connections: Turbo MUT is an acceptable increased MUT if additional torque is reqired for
drilling.

Note: Table above left intentionally blank. Turbo MUT and performance
properties only apply to Turbo Torque connections.
 Tool Joint
Make-up Torque and Max Tension Table

Tool Joint 6-5/8 FH Tool Joint OD (in) 8.500 Tool Joint ID (in) 4.250 Tool Joint Specified Minimum 120,000
Yield Strength (psi)

Tension at Shoulder Tension at Connection

Separation (lbs) Yield (lbs)
Min MUT 54,200 1,896,000 2,077,800
54,400 1,903,000 2,077,800
54,600 1,910,000 2,077,800
54,800 1,917,000 2,077,800
55,000 1,924,000 2,077,800
55,300 1,934,500 2,077,800
55,500 1,941,500 2,077,800
55,700 1,948,500 2,077,800
55,900 1,955,500 2,077,800
Max MUT 56,100 1,962,500 2,077,800
Note: Recommended MUT should always be used when possible. If not possible, MUT should be as close to Recommended MUT as possible.

Pipe Body
Combined Loading Table (Torque-Tension)

Pipe Body 90 % Inspection Class Pipe Body OD (in) 6.625 Wall Thickness (in) 0.522 Pipe Body Grade V-150

0 16,500 33,100 49,600 66,200 82,700 99,200 115,800 132,300 148,800 165,400 181,900

1,339,600 1,334,100 1,317,200 1,288,800 1,247,700 1,193,200 1,122,900 1,033,100 919,500 770,700 557,800 20,000
 Tool Joint Wear for 6‐5/8 FH (8.500 X 4.250)
Material SMYS (specified minimum yield strength) = 120,000 psi
140,000

120,000

100,000
Tool Joint
Torsional Strength
TTorque (ft‐lbs)

80,000 Recommended MUT

Min Recommended MUT

60,000

Pipe Body
80% of Premium Pipe
Body Torsional Strength
40,000
Pipe Body: 6.625 inch OD, 0.522 inch wall
thickness, V‐150 Pipe Grade

20,000

Tool Joint OD (inches)

 Tool Joint Torsional
Tool Strength
Wear Joint OD (ft-lbs)
(in)
New OD
8.5 108,400
8.432 108,400
8.364 108,400
8.295 108,400
8.227 106,600
8.159 100,900
8.091 95,300
8.023 89,700
7.955 84,200
7.886 78,700
7.818 73,400
Worn OD
7.75 68,100

Tool Recommended Make-up Torque Minimum Make-up Torque Turbo Make-up Torque
Joint OD Rec MUT Tension at Tension at Min MUT Tension at Tension at Turbo MUT Tension at Tension at
Shoulder Connection Shoulder Connection Shoulder Connection
(in) (ft-lbs) Separation (lbs) Yield (lbs) (ft-lbs) Separation (lbs)
Yield (lbs) (ft-lbs) Separation (lbs)
Yield (lbs)

8.5 56,100 1,962,500 2,077,800 54,200 1,896,000 2,077,800

8.432 56,100 2,007,900 2,077,800 54,200 1,939,900 2,077,800

8.364 56,100 2,057,100 2,077,800 54,200 1,987,400 2,077,800

8.295 56,100 2,043,100 2,043,100 54,200 2,039,800 2,077,800

8.227 56,100 1,984,400 1,984,400 53,300 2,061,500 2,077,800

8.159 56,100 1,910,800 1,910,800 50,500 2,010,800 2,077,800

8.091 56,100 1,821,400 1,821,400 47,600 1,955,200 2,077,800

8.023 53,800 1,829,600 1,829,600 44,900 1,906,800 2,077,800

7.955 50,500 1,892,800 1,892,800 42,100 1,853,200 2,077,800

7.886 47,200 1,964,600 1,964,600 39,400 1,803,900 2,077,800

7.818 44,000 2,043,900 2,043,900 36,700 1,752,500 2,077,800

7.75 40,900 2,044,700 2,077,800 34,100 1,704,700 2,077,800

Note for API Connections: Tension at shoulder separation and Tension at connection failure may Note: Table above left intentionally
fluctuate as OD decreases due to Recommended make-up toqure exceeding T3. blank. Turbo MUT and performance
properties only apply to Turbo Torque
connections.

Pipe Body
Combined Loading Table (Torque-Tension)

Pipe Body 90 % Inspection Class Pipe Body OD (in) 6.625 Wall Thickness (in) 0.522 Pipe Body Grade V-150

0 16,500 33,100 49,600 66,200 82,700 99,200 115,800 132,300 148,800 165,400 181,900

1,339,600 1,334,100 1,317,200 1,288,800 1,247,700 1,193,200 1,122,900 1,033,100 919,500 770,700 557,800 20,000